PRC: Produce lines of assets for a single mistake poster project (the project has no assets with valid in the service dates).

Similar Questions

• I HAV been trying to update my expiration date of credit card for 3 months.  When I go to lelien for "Update payment Details" and edit the expiration date and < click > save, I get an error saying my address in invalid.  I have several chat sessions

  Can someone please help...  Suggestions, how can I overcome this problem, in which case my Adobe Creative cloud subscription will expire today due to and credit card.

  I tried to update my expiration date of credit card for 3 months.  When I go to the "Update payment Details" link and change the expiry date then < click > save, I get an error saying my invalid address.  I had several chat sessions with support, called support and logged a ticket with support and every time they tell me to go to a particular link to update my contact information.  I do and I get the same error...   "My coordinates are not valid."  Now I'm in the position where my creative cloud membership will expire today everything simply because the Adobe address validation do not think that my address is valid.

  I got 'Cat' sessions with the support,

  I made a phone call to the support and

  I logged a ticket with support.  I'm really trying to pay my subscription.  Support ticket No. 0216009991

  Whenever I have contact the support they gave me a link to the site where I supposedly can I enter my credit card details.

  Whenever I went on the link provided, I'd get the same error.  "My coordinates are not valid."

  What I checked on my address.

  1. I look out the window and the view I get is the same as it was yesterday and the day, and in fact several years ago.

  2. I go out in the street, Yes, the street sign says the name of my street

  3. I go to my mailbox and it does not say the number of my mailing address

  4. yes I get the email to the address registered with Adobe

  5. yes I received the email from adobe delivered to the address

  6. I get the address of Google, yes I can find it on Google

  7. I converted to use the satellite view Google maps

  8. Yes, it's my house, with the 12 solar panels on the roof

  9. Yes, that's my black car in the driveway

  10. I check my reviews for my address Board rate, Yes, this is the address that I recorded with Adobe

  11. Yes, I had this same address registered at Adobe for the past 3 years.  So far I have not had a problem with my address

  12. I work with a software company that actually uses the address of Google, under license validation, built-in in their application.  I used this software to check to see if my address is recognized as valid.  You guessed it is recognized as valid.

  I did check my credit card

  12. Yes, I have, every time checked the status of my credit card with the Bank

  a. the card is valid

  b. the card's not over it's credit limit

  c. the card is not due

  d. the address registered to my credit card with the Bank is the same address that I recorded with Adobe

  Since the last link Adobe support gave me two weeks ago, to change my credit card details, I was able to key a new credit card in the fields (Yes it's good that I was forced to get a new credit card only for Adobe!   If I am that everything would be fine.

  But wait...   The details I provided this link have not been updated on the Adobe site.  (So I check the link... I was scammed to get my card number?)

  After investigation of the link, I'm fairly confident of the link provided is a true link to Adobe.  www.adobe.com/go/Secure

  Did anyone else had this type of problem when you try to update the expiration date of a credit card?

  The question is about to have an impact on my ability to process pictures for my photography business, it affects my ability to earn an income.

  So you could say I'm getting angry some of the stuffing!

  In summary...  I knew that my credit card had a new expiration date and I tried to update the expiration 3 months 3 months.

  Simply because the use of the validation of addresses, Adobe, has a few flaws, I was not able to update this information.  So Adobe today will stop my subscription.

  As I said in previous support tickets, chat sessions and telephone.  I'll be more disappointed if I am prevented from using software and Adobe cloud features.

  It is copied from an email I received during the night from Adobe...

  Continue to create with us

  Hi Thomas,

  Your Creative cloud membership will expire on August 23, 2015 (PT). We hope that you have been getting the best out of all that creative cloud has to offer. To extend your subscription, please update the billing for your account information, or add a prepaid card.

  Update your billing information (there is a link to where I can update the expiry date) pocztek sigh...   I still get the same error telling me that my address is not valid!

  Thank you for being a part of the creative cloud,

  The creative team Cloud

  Good creative team...  I REALLY WANT TO STAY IN THE TEAM, AS YOU CAN SEE FROM THE FOREGOING, THAT I REALLY TRIED TO SOLVE THIS PROBLEM SEVERAL TIMES OVER THE PAST 3 MONTHS.

  I tried to include as much information as possible in what I said earlier, I expressed in a way that will hopefully provide a little humor, but at the same time to portray the frustration I'm feeling right now.

  Honestly, I don't know what more I can do.  It seems that I have no other recourse start litigation for loss of income coming from Adobe address Validation errors.  There is a real chance that I will be litigated against because I won't be able to complete contracts.

  There must be a healthier solution of mind that court proceedings.

  Kind regards

  Thomas Croll

  (Tom)

  Tom, let me some time. I I will get these verified case and will contact you.

• public network for virtual machines, private storage and the service console?

  Hello

  So far I had a pretty small facility with 2 servers with 4 physical network adapters each running ESX 3.5, a small box of EqualLogic SAN to shared storage and a few virtual machines on our network of regular reinforcement, routed, not on a private.   The network config was really simple.  I just put everything on real IP addresses on our network of building.

  Now I want to move the SAN and the traffic on a private service console network, but I don't know how to do this.

  Right now I use 2 NETWORK cards on each server:

  vmnic0 is configured on vSwitch0 and has the network of the VM on it that all my use of VMS to talk to the outside world, and it also has the Service Console that uses Virtual Center and I use ssh to it.

  vmnic1 is configured on vSwitch1 and a VMKernel Port and also a Service Console Port for iSCSI Software to talk to my SAN.  (never been clear on why both are needed to talk to the SAN, but doctors say they are)

  My plan is to set up a vSwitch2 and bind it to vmnic2 and implemented a VMKernel Port and the Service Console Port for software iSCSI on the 10.x.x.x network, set up my new (larger) SAN box on the 10.x.x.x network and simply use Storage vMotion to move virtual machines to the new storage space.  As soon as I did this, I would like to not use the Service Console on vSwitch2 and not a Console Service at all on vSwitch0.  Is it possible to delete the one on vSwitch0 and just use a new vSwitch2 for Virtual Center and ssh access?

  So my proposed configuration would be:

  vSwitch0: VM network only, used by the VM guests for oriented public access network, no construction of Network Service Console, linked to vmnic0

  vSwitch1: superfluous once I do storage vMotion of everything on my old SAN, will eventually remove and pair vmnic 1 with vmnic0, linked to vmnic1

  vSwitch2: VMKernel and Service Console on the network 10.x.x.x, used to access the new SAN, used by Virtual Center to access the ESX, used to SSH in to ESX on private network, associated vmnic2

  If it works?

  Thank you.

  Hello

  VMkernel ports cannot live on the same subnet. So if you have 3 vmkernel ports say: vMotion, iSCSI and NFS. You really need 3 subnets. 1 for each vmkernel port.

  Otherwise how does he know all send properly?

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• How do I change name of file for HTML single image pages in the web gallery for LR 3

  Hello

  I would like to change the file name by default for HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to withdraw the name of HTML in the 'great' chain file so it exactly corresponds to image file.

  Specifically, the default URL is like this:

  http://www.mysite.com/content/_c_EMT2146_large.html

  and I wish it were like that

  http://www.mysite.com/content/_c_EMT2146.html

  I guess that there is a way to make this change by using model editors, but I can't understand it.

  Thank you

  James Riemermann

  On Mac LR is provided as a package. You must Show Package in the Finder, and then work down to:

  \Contents\Plugins\Web.lrmodule\Contents\Resources\Galleries.

• I have talked to Support 3 times and still can not get the iTunes email change on my Iphone 5. My new E-mail workks fine in line, but when, for example, I try to update my applications, I am presented with the old email again. Help, please!

  Suppost Apple and I tried a lot of different things. I can use my new email and password to connect to Itunes, but when I try to do something like, sign in to my App Store to upgrade my Apps (35 updates and counting!) I'm always presented with my old email address, and I have more access to this mail. Spend a WEEK trying to resolve this is ridiculous! Can someone please finally help me?

  Thank you!!

  BENCHAYKH

  What have you done so far? Updated the primary e-mail address on your existing account, you did not create a new account? All content is linked to the account that has downloaded, if you created a new account, all of your existing applications will remain tied to your old account and only this account can download updates for them.

  If you updated your account then you have: what to do when you have changed your Apple ID email address or password - Apple support ?

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Is there a fix for these 10 mistakes? In the event viewer

  Running Windows 7 (SP1)

  Select Start, control panel (small icon display no category), indexing, advanced, Options settings for Indexing tab and click the reset button. To do when the computer is not used. It may take a while to rebuild an index and interruptions could take even more time.

• Safari, taken in charge by the fake site FBI and money required for release, I need to delete the history data and the web to regain access.  How do I block it?

  Safari, supported by the fake site of the FBI and the money requested release. I have to delete the history data and the web to regain control. How do I block it?

  Lean on an adblock app. I use Weblock but there are other

  And if there is a particular site that you are attending that flat to the top of these malicious ads, well stop to go.

• Is there a package from Adobe for a single user who would allow me to merge/combine PDF files, convert PDF to Word and I would use echosign?

  Is there a package from Adobe for a single user who would allow me to merge/combine PDF files, convert PDF to Word and I would use echosign?

  Hi mm12798893,

  For all these features, please see the service pack Adobe PDF or Acrobat DC subscription.

  See these KB doc for more information:

  • FREQUENTLY ASKED QUESTIONS | Adobe PDF Pack
  • Answers to some of the more frequently asked questions about Acrobat DC.
  • Price | Export to Adobe PDF

  https://www.Acrobat.com/en_US/landing/EXPORTPDF-pricing-b.html let us know if you need help.

  Kind regards

  Meenakshi

• Concepts: how much writing on disk for a single update

  (I use 10.2.0.5 but I think that this applies to any version)
  
  After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.
  
  The following is correct?
  
  For an update statement:
  (1) the original data are written in tables UNDO space
  (2) this is protected by a write first to REDO log
  (3) the new data is written to the table space
  (4) this is also protected by an entry first in the redo log
  (5) after that fills in the redo log, it is copied to an archived log
  (6) at the time of the backup that Archives archiving log is also best once more
  
  So for a single update, I count at least six entries of the same data?
  It is probably what makes the robust Oracle.

  user12204556 wrote:
  (I use 10.2.0.5 but I think that this applies to any version)

  After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.

  The following is correct?

  For an update statement:
  (1) the original data are written in tables UNDO space

  Yes

  (2) this is protected by a write first to REDO log

  Yes

  (3) the new data is written to the table space

  No, your data still haven't write (immediately) to datafiles (your tablespaces logically). When point of control (when manually to CHANGE the point of VERIFICATION SYSTEM, SWITCH of NEWSPAPER, when the buffer cache is full, STOP IMMEDIATELY in backup database tablespace mode) then your blocks of data will apply to data files.

  (4) this is also protected by an entry first in the redo log

  Yes

  (5) after that fills in the redo log, it is copied to an archived log

  YesIn ARCHIVELOG mode()

  (6) at the time of the backup that Archives archiving log is also best once more

  YES.

  So for a single update, I count at least six entries of the same data?

  These are not same data! This is the mechanism of oracle database. Cancel the information generated immediately and ensure uniformity reading (to restore). Redo information just, contain no information. It comes to redo change agent who used methods of recovery (media and instance) and finally your data updates do not immediately write data by DBWR because files there is reason of performance.

• Extract the expiration date of secured area to use for webapps

  Hi all

  Is it possible to extract the date of expiry of safe zone and use it to set the expiration date for webapps? I see that the expiry date of the zones can be retrieved through the e-mail section and not other places. Globals.User is out of expiry date.

  All I need is the number of days so that I can automatically update in the Webapp Set to expire in ___ days.

  The webapps unless automatically deletes itself when users are initiated out of secure areas?

  Try {{subscriptions.items [0] .expiryDate}}-items contains an array, you must specify which item you want to target.

  You must also consider the items array can contain several elements (if the currently logged-in user is subscribed to several secure areas).

  Hope this helps,

  Mihai

• How to choose different lines for a single sale order and ship individually

  I have a customer order of lets say 10 broadside of this same article for quantities of 10 each which means 100 quantities.

  When I use the release sales order form it will take the entire order and forward it.

  But I need to take the line and then generate a delivery against it and then to ship and invoice it.

  Need to know how to do this

  You can take different lines for a single sales order and ship individually using FORM of TRANSACTION of DELIVERIES.

  Navigation: OM RESP > order management > shipping > Transactions

• for authentication single controller 5508 AP

  Hello

  in our project, they are two of 5508 wireless controller

  We need to set up sso AP for two wlc

  the licenses we bought for only for a controller

  as shown below

  Cisco	AIR-CT5508-500-K9	Cisco 5508 wireless controller series APs up to 500
  Cisco	CON-SNT-CT08500	Range Cisco 5508 SNTC-8X5XNBD
  Cisco	LIC-CT5508-BASE	Basic software license
  Cisco	LIC-CT5508-500	AP 500 Base license
  Cisco	SWC5500K9-80	Cisco Unified Wireless Controller version 8.0 SW
  Cisco	AIR-PWR-CORD-UK	AIR Line Cord United Kingdom
  Cisco	AIR-PWR-5500-AC	Cisco series 5500 redundant power wireless controller
  Cisco	AIR-CT5508-HA-K9	Cisco series 5508 wireless controller for high availability
  Cisco	CON-SNT-CT5508HA	1 year, SNTC 8X5XNBD Cisco 5508 series Wi

  My question to switch to wlc reduancy we're going to assign for each AP in high availability of the primary and secondary ip address

  APSSO how will tip work

  in each access point how to assign IP primary and secondary for each APs at APSSO

  and the licenses are purchased for a single controller

  specialists please advice of the work of these APSSO topology for two controller

  Syed,

  With SSO, you must initially have an ip address for both controllers.  Then when configure you SSO, the controller HA will be the primary backup.  License is required on the controller sku non-HA.  Failover will automatically happen without problem for the AP or end users.

  If you went with N + 1 and not use the SSO, then you need an ip address for each controller and each controller must be configured.  There are many deployments of N + 1 there, but SSO becomes popular due to rapid failover.  The only question is if SSO gets corrupted then both are in decline and that's the advantage of N + 1.

  Your list is great for either.

  -Scott

  Please evaluate the useful messages *.

• given in the lines, combine them in a single line

  Hello world

  I have programmed plsql to organize data based on a condition, but I need to do it directly in sql, if possible, once the value of the line in another line to combine in a single line, for example

  Header 1	Header 2	Header 3
  A77	A84	A12
  A12	A10	A11
  A30	A44	A42
  A77	A02	A70
  A08

  A09A86A08

  The goal

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6
  A02	A10	A11	A12	A77	A84
  A08	A09	A86
  A30	A42	A44

  If you can see the line no 2 & 4 there is A12, A77 who do declare on line no 1, so I need to combine and so on.

  example of data

  CREATE TABLE testrows (col1 VARCHAR2 (10), col2 VARCHAR2 (10), col3 VARCHAR2 (10));

  INSERT INTO testrows

  VALUES ('77', 'A84', 'A12');

  INSERT INTO testrows

  VALUES ("A12", "A10", "A11");

  INSERT INTO testrows

  VALUES ('A30', 'A44', "A42");

  INSERT INTO testrows

  (col1, col2

  )

  VALUES ("A08", "A09"

  );

  INSERT INTO testrows

  (col1, col2

  )

  VALUES ('A86","A08"

  );

  INSERT INTO testrows

  VALUES ('A77","A02","A70");

  Kind regards

  Hello

  I'm not sure that understand what you want.  You must explain in more detail, citing specific examples.

  Why won't you 'The A70' in the results?

  Maybe you want something like this:

  WITH got_r_num AS

  (

  SELECT col1, col2, col3

  ROWNUM AS r_num

  OF testrows

  )

  got_grp AS

  (

  SELECT the val

  MIN (val CONNECT_BY_ROOT) AS grp

  -The following 3 lines are necessary only if rotating into discrete columns

  -, ROW_NUMBER () OVER (PARTITION OF MIN (val CONNECT_BY_ROOT)

  --                               ORDER BY      val

  --                             )          AS c_num

  OF got_r_num

  UNPIVOT (val

  FOR the collar (col1, col2, col3)

  )

  CONNECT BY NOCYCLE (val = val PREREQUISITE AND r_num <> r_num PREREQUISITE)

  OR (val <> val PREREQUISITE AND r_num = PRIOR r_num)

  GROUP BY val

  )

  SELECT LISTAGG (val, ",") THE Group (ORDER BY val) AS val_list

  OF got_grp

  GROUP BY grp

  ORDER BY grp

  ;

  The results I get include "The A70" and are in a tall column concatenated, but are also what you asked:

  VAL_LIST

  ----------------------------------------

  A02, A10, A11, A12, A70, A77, A84

  A08 A09, A86

  A30, A42, A44

  The number of columns in the output must be hard-coded in the application.  If you want the number of columns depends on what the search query, you need dynamic SQL statements.  The following all the addresses this issue:

  Re: 4. How can I convert rows to columns?

  Re: County report and the sum of the number of rows by multiple columns

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4471013000346257238

• The fonts in Illustrator are swoop for use with a laser engraving? If not, how do I convert a font for a single path... not an overview of the police?

  The fonts in Illustrator are swoop for use with a laser engraving? If not, how do I convert a font for a single path... not an overview of the police?

  "I try to avoid cutting each line twice.  This is double the cost.

  I hear you. I was there for more than 30 years.

  There are very few single line fonts. And most of the people is the property of specific burning software (i.e. the TTF or OTF fonts). Apart from these burning programs, what had to happen is for a foundry of fonts specifically design a single font. And, from what I've heard of these smelters (for the last 30 + years), the market is too small. I'm not saying that they are correct, it's just that it is their perception.

  Good luck

  -OB