Pre-fill the form user Xellerate

Similar Questions

• Pre-fill the form Registration (Buy)

  I think I'll be really really stupid, but I tried the tips on http://KB.worldsecuresystems.com/654/bc_654.html?BC-partner to allow registered customers to connect just after adding items to their cart without the need to re - register or fill in their details, and I can't seem to do.  I think I'll use method 1, but here are my problems.
  

  Problem 1:

  Where can I add the {module_FirstName}, etc available registration (Buy)?  Everywhere where I tried, is not displayed and disappears when I go back to HTML or is off the beaten path.

  Problem 2:

  Will the button automatically direct connection of the user to the pre-filled form?
  

  Does anyone know of a very good (and I think I need simple) way to do this please?

  In addition, while I ask me questions, when I add the payment gateway, these details will automatically fill their form as well.  I use SagePay I think.

  Thank you very much for your help

  Lisa

  Post edited by: GorgeousConcepts

  Hi Lisa,

  (1) all you need to do is to place the module within the field tag.

  

  (2) insert generic login area in the record buy arrangement.  This will simply refresh the page once the client connects.  No redirect is necessary.

  

  I hope this helps!

  -Sidney

• Pre-fill the form button fields

  Hi guys,.

  After little help! I have created a web form for a company to use for travel. It has specific fields for location, accommodation and date of travel.

  I would like to know the best way to pre fill these fields if someone clicks on through a list of availability on a page of the accommodation?

  For example, if there is a link "Book now" on 11/17/2012 at the hotel of new in France, how I would make only if someone clicks on 'Book now' they then go to a form where they can fill in their details relevant information pre-filled for the date, they chose.

  for example:

  Name: (empty, to enter)

  Address: (empty, to enter)

  Phone: (empty, to enter)

  E-mail: (empty, to enter)

  Date: 17 November 2012

  Country: France

  Accommodation: Hotel new

  Nights: (empty, to enter)

  Any help would be appreciated, thanks!

  S

  All you have to do is have parameters in the URL and fill them according to the options.

  So... nextpage.html? country = & date =.

  And with jQuery that populate these settings on hover/click/change etc.

  Just make sure that they have values before going to the next page.

  On the next page all you do is use module_url.

  So for an entry for the country field you get the value {module_url, country} where the country is the parameter in the URL and the system will fetch its value.

  So the last part is simple, simply to get the url parameters defined when you click on through the following page.

  If it's a form, just add at the end of the action of the form.

• Pre-fill the end-user selection

  Can you set up several fields to pre-fill in the first input field?

  Yes, but you should not use JavaScript to get there.

• Pre-fill the fake

  Hello
  I have a situation where all provisions of a user account on a resource are made by operators (with the necessary roles to be able to buy directly a resource). Operators should be able to see the person in charge of the user on the account form. To do this, I created a new field in the form which is automatically filled with a custom with the User Manager adapter. The problem is that prepopulate adapters cannot fill a non-empty field, so if the user manager later changed, this field shows the former manager when you try to change the user's account. It is not important for me the Manager information (this is only for display purposes). So, is it possible to always pre-fill the field with the value of tha of the Manager, but save it in the DB, then this field will be always empty and always be filled with the value of the order display manager?
  
  Best regards
  Carole

  Why don't you wanan save this value in DB?

  Without saving changes in the DB, it is not possible.

  The problem is that prepopulate adapters cannot fill a non-empty field

  What it means?

  Entity adapter will only work if there is some update on the form.

  Prepopulate will works only at the time of commissioning not updated.

• Why Thunderbird 38.1 suddenly treat the addresses of the list in the form of individual addresses, & dismiss them because they are not in the form user@url?

  When you try to send a message to a group set up in my address book, I get an error message [group name < updated the group description >] is not an email address valid because it is not the form user@host. You need to correct before sending the e-mail message. Thunderbird has apparently taken the description section and tried to treat it as an email address. In doing so, it changes the description of and the original format [names, name2, name 3] (with the exception of the hooks) of [< name >, name2, "name 3" >].

  The list of mail has worked with no problems until today.

  Zenos. thanks for the suggestion. Although he did not provide a direct solution, he pointed me a. Being reluctant to try to re-enter an address book with more than 1,000 entries, I saved the book and replaced by a backup copy of a computer when I heard the e-mail function worked as desired. I had the same problem.
  I tried to export the book to save what I could at least and ran into problems, I discovered since came from trying to export "all address books.
  Then, I opened a copy of AB. File MAB in Quattro Pro, where I noted PS split the description section of the list of mail problem in separate cells, from commas in this description. I went back to the address book, removed commas from the description, and my group e-mail went out as gently as might be desired.
  I would note that commas have been this likely description for 15 years or more and only now has caused a problem. I guess that's due to some changes in Thunderbird was last updated. Would be nice if we got warnings about this kind of change.
  Answer to my problem: remove the commas from the description in the properties of the list.

• F &amp; G Committee &lt; ' F &amp; G Committee' &gt; is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message.

  Out with the new v.31.1.0, the: 2 September 2014 version of Thunderbird, I can email is no longer a list of recipients, getting the error msg: F & G Committee < ' F & G Committee' > is not a valid e-mail address because it is not the form user@host. You need to correct before sending the e-mail message. In earlier versions, the addresses of individual e-mail in the list (F & G Committee in this case) are automatically placed in as the e-mail is sent. Is there a solution to this problem?

  Read this.
  https://support.Mozilla.org/en-us/questions/1019019

• How can I go into a used computer and change the username to the mine and to make a new password or delete the old user of my computer completely? (preferably get rid of the former user)?

  I need to know how to solve this problem in detail please

  I bought a computer with windows xp service pack 3 and when I start it the old user keeps popping up asking for a password. I want to know how to enter and change the username to the mine and to make a new password or delete the old user of my computer completely (preferably get rid of the former user)?

  See the following link to delete the account: http://support.microsoft.com/kb/279783

• No data in the form user monitor

  In the form user monitor, only data of the user are displayed. Responsibility and details of form field are not displayed in the form. Profile sign - on the level of verification is set to 'User' at the level of the site. Y at - it criteria for responsibility and form field data to show?

  Navigation:

  System administrator / security/user/monitor

  See MOS Doc 979102.1

• When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind

  When I use my clipping on an image mask, fills the form I use the whole layer instead of just being a small shape Panel and then I put my picture on the shape layer, a clipping mask, but the form becomes clear with just a slight edge. The photo behind it does not move. I did this project of class before and it worked fine so I'm not sure if I have something started or... Any thoughts?

  I thought about it. That's all just stupid on my part and a bit of frustration because photoshop is my sworn enemy of then adobe added in. Thanks tho!

• I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I shouldn't

  I have a user who no longer works for the company.  Someone took his place, the same computer.  She used the same account as the former user.  I would like to delete the old user and assign the new.  It will lose something if I do this?  I wouldn't reinstall anything, right?

  Hi Greg,.

  You won't lose any application on the computer.

  You can remove a user from the license and assign it to another user according to the help below document:

  Using creative cloud | Manage your creative cloud to the membership of the teams

  Kind regards

  Sheena

• How to pre-fill the ADF form with the data?

  Hi guys,.
  
  I was wondering how you go about the generation of a pre-filled form of ADF. Is this something that is done if the designer of the ADF and the business objects? or do you create database tables stay and bind in the ADF and the workflow. Specifically, I want that if a user is presented with a several drop-down lists when the human task of the initiator is executed.
  
  Thank you
  Ross

  Hi Ross
  1. Yes, in all first place in the database, we added all the data manually for all research. Its our own schema custom. We plan to provide a few simple administration screens in a different WebApps to maintain these values to search. Note that it is a different simple ADF application, with a layer of EJB and EJB layer calling this and get/update database values.

  2. in ADDITION, we have a few search values we get from system/application totally another as Oracle EBS Suite. To do this, we have created custom schema. In this custom scheme, we have a few stored procedures created by the developers of EBS database (they are more familiar with EBS). Now in our EJB layer, we use architecture JPA, call these stored procedures and get all values for the search and display in the TaskDetails page. These values are maintained in EBS itself, so we have not all custom within our SOA/BPM project admin screens.

  In conclusion, our SOA/BPM applications, we have 2 databases. First database is for components SOA where we run RCU comand and there all SOA_INFRA, MDS, diagrams ORABAM etc. The second database is for our custom schema specific to our application. Here, we have our own lookup tables, custom table and all cutom stored procedures than coonect to external EBS etc. Weblogic console, we have just to create a data source for this second database and use layer JPA (persistence.xml file). For the first database, you already know that in the creation of the field itself, it will create all sources of data also.

  Thank you
  Ravi Jegga

• How to pre-fill the user information during the operation to assign tasks

  Hello

  I have a requrirement to pre-fill fields of the form (name, Email, phone etc) when a task is assigned to a user. Users are dynamically specified, so I use the user to find and services to assign tasks to locate and assign them to the user. Since I was a user variable that is the result of the operation of the user to find, I was hoping to get the user information with the attributes of the type of user.

  I tried to use the service to set the value to set the form field (Email) with the email of the user that is object type attribute

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User/email-> /process_data/facilityAuthority/object/@email

  However I get the following error when I try to do - com.adobe.idp.dsc.util.InvalidCoercionException: can not compel object: [B@335d of the type: [B type: interface org.w3c.dom.Document.]]

  Is it possible to retrieve information from the user to the user object? If yes how values for the attributes of the user (name, Email and phone etc...) so that I can fill in the form?

  Thank you
  Nicolas

  Hello

  Please cast chain e-mail before you assign it.

  Example of

  / process_data/MyForm/Object/Data/XDP/datasets/Data/Form/User / email-> string (process_data/facilityAuthority/object/@email)

  For more details, please refer to the forum http://forums.adobe.com/thread/492826

  Thank you

• Download the signature using the API and pre fill the signature

  I use echosign api to display forms to get the candidate (which comes on our site). We show the form of widget. We use more than 40 forms. It is difficult for candidates to sign all forms. Is there anyway I can get the signature of the candidate and pre fill out the signature using the API?

  If not, is there another way to do this?

  NOTE: Candidate - not a user in echosign

  Hello RajkumarMohan,

  By default, it is always required by the signatories to give their signature any document esigning. Even with the API, it is not possible. If it is a single widget with several fields of signature, once the signer signs a first field, and then when he clicks on the second field of signature, the signature is automatically populated in it.

  Kind regards

  -Usman

• Pre-fill the adapters stopped working

  Hello
  
  I added some attributes to an existing adapter pre-population code. He mapped successfully to the field to form user AD process. There were several prepop adapter related fields on the process AD form.
  
  But now, after that I did the changes, no cards pre-population works. I don't see anything in the form of courses when I set up a user of AD. Even AD provisionign status shows as validation of PRovisioning task and the system is pending.
  
  Does anyone have idea about it? What could be worng here? I tried so many options (imported and replaced the process by other environments form shape, made several versions of the form of courses and set them active, recreated the adapter, compiled and again once it mapped with process form field). But nothing seems to work :-(
  
  Any help will be much appreciated.
  
  Thank you

  The error code:

  ERROR, June 26, 2009 04:01:52, 365, http://XELLERATE.ADAPTERS, class/method: tcAdpUtils/getJavaParms some problems: task PREPOPULATEDISPLAYNAME, constructor parameter 1 has not been mapped

  Indicates that you have not mapped to attributes in the constructor of your adapter pre-load "PREPOPULATEDISPLAYNAME." Please take another look.

  Hope this helps
  / Martin