Pre-fill the adapters stopped working
HelloI added some attributes to an existing adapter pre-population code. He mapped successfully to the field to form user AD process. There were several prepop adapter related fields on the process AD form.
But now, after that I did the changes, no cards pre-population works. I don't see anything in the form of courses when I set up a user of AD. Even AD provisionign status shows as validation of PRovisioning task and the system is pending.
Does anyone have idea about it? What could be worng here? I tried so many options (imported and replaced the process by other environments form shape, made several versions of the form of courses and set them active, recreated the adapter, compiled and again once it mapped with process form field). But nothing seems to work :-(
Any help will be much appreciated.
Thank you
The error code:
ERROR, June 26, 2009 04:01:52, 365, http://XELLERATE.ADAPTERS, class/method: tcAdpUtils/getJavaParms some problems: task PREPOPULATEDISPLAYNAME, constructor parameter 1 has not been mapped
Indicates that you have not mapped to attributes in the constructor of your adapter pre-load "PREPOPULATEDISPLAYNAME." Please take another look.
Hope this helps
/ Martin
Tags: Fusion Middleware
Similar Questions
-
Hello
I have a situation where all provisions of a user account on a resource are made by operators (with the necessary roles to be able to buy directly a resource). Operators should be able to see the person in charge of the user on the account form. To do this, I created a new field in the form which is automatically filled with a custom with the User Manager adapter. The problem is that prepopulate adapters cannot fill a non-empty field, so if the user manager later changed, this field shows the former manager when you try to change the user's account. It is not important for me the Manager information (this is only for display purposes). So, is it possible to always pre-fill the field with the value of tha of the Manager, but save it in the DB, then this field will be always empty and always be filled with the value of the order display manager?
Best regards
CaroleWhy don't you wanan save this value in DB?
Without saving changes in the DB, it is not possible.
The problem is that prepopulate adapters cannot fill a non-empty field
What it means?
Entity adapter will only work if there is some update on the form.
Prepopulate will works only at the time of commissioning not updated.
-
The noise stopped working on Satellite P100
The noise stopped working.
Toshiba diagnosis explains his failure, but after all the rest is good, any ideas?Hello
That said the State of the sound card in Device Manager?
You don't see any yellow exclamation?Have you tried to update (restore) audio driver?
Have you checked if the 'secret' was not enabled?
You hear something using the headset?
Please check these simple steps, and view the results.
-
Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program
Hello... Adobe, you have a phone number I can call to talk about this?
Why don't answer you my survey?
-
the Airport stops working intermittently
Checking to see if there is a software update for the airport. My router stopped working and cannot identify the cause.
Not for the last 2 years...
Tell us more details.
What model is the most convenient airport?
What firmware does?
This modem you have and who is your ISP?
There are a number of issues with Cox cable in places that they are running out of IPv6. There are also problems with some cable modems... particularly simple serial port SB.
-
The mouse stops working after a few minutes
Original title: my USB mouse ch
My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?
Hi Ann Juel,
1. what happens when you connect the USB mouse to the computer? You get the error message?
2. What is the brand and model of the computer?
3. What is the brand and model of the mouse?
4. What is the operating system installed on the computer?
We will analyze and identify the cause of the problem.
Method 1:
You can connect the mouse to another computer and check. Also perform the methods provided.
Also, try a different USB port and check.
Method 2:
Follow the link below a convenience store opened.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 3:
Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.
Change the settings of the mouse
http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settingsHope this information helps. Response with status so that we can help you.
-
The right side of the bottom bar of the touchpad of the ACER laptop stop working. I can not copy, paste, etc. Help, please
Hello
It would be best to contact the manufacturer of the laptop computer for further assistance on touchpad issues.
Support from Acer: http://support.acer.com/us/en/default.aspx
Hope the information is useful.
-
When my laptop battery died the printer stopped working, now does not start
The laptop screen went black, (while a print job is in progress) I plugged in and restarted the computer. Since that time there no task sent to this printer have been achieved. I had to go back to my old HP882C just plugged into the 2side Print Setup and finished work. HP C5580 had a task that will be
not only cancel all print always not that hell has happened?
Hello
I suspect that when the battery is dead, the spooler has been altered.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------
Also check with HP support and forums.
HP support
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps.
-
The mouse stops working but left and right buttons still work.
I'm having a problem with my mouse, the cursor will stop working, but all buttons still work. I tried another mouse, uninstall and reinstall the mouse driver updated and change USB ports, so it is not automatically turned off. Nothing works I found so far.
I found something here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-64-bit-mouse-pointer-not-moving-but/fc581ad9-87ac-410e-a7ae-55ffcf626f03?db=5
-
Download the signature using the API and pre fill the signature
I use echosign api to display forms to get the candidate (which comes on our site). We show the form of widget. We use more than 40 forms. It is difficult for candidates to sign all forms. Is there anyway I can get the signature of the candidate and pre fill out the signature using the API?
If not, is there another way to do this?
NOTE: Candidate - not a user in echosign
Hello RajkumarMohan,
By default, it is always required by the signatories to give their signature any document esigning. Even with the API, it is not possible. If it is a single widget with several fields of signature, once the signer signs a first field, and then when he clicks on the second field of signature, the signature is automatically populated in it.
Kind regards
-Usman
-
Pre-fill the end-user selection
Can you set up several fields to pre-fill in the first input field?
Yes, but you should not use JavaScript to get there.
-
Click on the boxes stopped working
I'm having a problem with my click boxes. This worked, but stopped. I use version 8.
I have a navigation drag about 4 slides at the beginning. I click on this slide boxes that go to a specific slide. They have stopped working. I tried to recreate the problem and I added a few slides at the end of my project of 35 slides. When I tested a slide at the end of the project, it would jump to the correct slide. In other words, jump slide 36 to slide 38, or 36 slide in slide 39.
Just for fun, I moved 36, my navigation test blade slide, at the front of the project. It has stopped working. Somehow, the click boxes work at the end of the project, but not at the beginning of the project.
Any ideas?
There are only two possibilities (know that sometimes HTML5 navigation did not work properly in 8.0.1 - but you have the same problems to SWF):
- something is wrong with your advanced action, or actions on the other slides
- your project is getting damaged.
For the second case, attempt to copy a new blank project. In CP8 actions come along when you copy the object or slide, they are attached to. personally I would have created action shared, then you are sure that you can reuse them.
-
Just download the free trial 30 days of creative cloud. I have 29 days left. Program suddenly stops working. No output whatsoever. That's happened?
[email protected] wrote:
and when I click on "continue trial", I can't use the program, regarding the recording and/or playback.
Well, suppose it opens, and that the transport is not working. If this is the case, then there is one thing that stop it - no valid audio device found. Go to the Preferences menu and look at your hardware, then select something relevant (probably a device internal). If the answer is not obvious, report on what you see there.
-
Pre-fill the form Registration (Buy)
I think I'll be really really stupid, but I tried the tips on http://KB.worldsecuresystems.com/654/bc_654.html?BC-partner to allow registered customers to connect just after adding items to their cart without the need to re - register or fill in their details, and I can't seem to do. I think I'll use method 1, but here are my problems.
Problem 1:
Where can I add the {module_FirstName}, etc available registration (Buy)? Everywhere where I tried, is not displayed and disappears when I go back to HTML or is off the beaten path.
Problem 2:
Will the button automatically direct connection of the user to the pre-filled form?
Does anyone know of a very good (and I think I need simple) way to do this please?
In addition, while I ask me questions, when I add the payment gateway, these details will automatically fill their form as well. I use SagePay I think.
Thank you very much for your help
Lisa
Post edited by: GorgeousConcepts
Hi Lisa,
(1) all you need to do is to place the module within the field tag.
(2) insert generic login area in the record buy arrangement. This will simply refresh the page once the client connects. No redirect is necessary.
I hope this helps!
-Sidney
-
Pre-fill the form button fields
Hi guys,.
After little help! I have created a web form for a company to use for travel. It has specific fields for location, accommodation and date of travel.
I would like to know the best way to pre fill these fields if someone clicks on through a list of availability on a page of the accommodation?
For example, if there is a link "Book now" on 11/17/2012 at the hotel of new in France, how I would make only if someone clicks on 'Book now' they then go to a form where they can fill in their details relevant information pre-filled for the date, they chose.
for example:
Name: (empty, to enter)
Address: (empty, to enter)
Phone: (empty, to enter)
E-mail: (empty, to enter)
Date: 17 November 2012
Country: France
Accommodation: Hotel new
Nights: (empty, to enter)
Any help would be appreciated, thanks!
S
All you have to do is have parameters in the URL and fill them according to the options.
So... nextpage.html? country = & date =.
And with jQuery that populate these settings on hover/click/change etc.
Just make sure that they have values before going to the next page.
On the next page all you do is use module_url.
So for an entry for the country field you get the value {module_url, country} where the country is the parameter in the URL and the system will fetch its value.
So the last part is simple, simply to get the url parameters defined when you click on through the following page.
If it's a form, just add at the end of the action of the form.
Maybe you are looking for
-
Other than flash videos videos work very well, and all the videos work fine if I use Safari.
-
Disk mode "Legacy IDE" on Toshiba Satellite C660-108
How to set the drive mode BIOS "Legacy IDE" on a Toshiba Satellite C660-108?
-
Acquisition of data in time real LabView
I'm trying to get a better idea of what is happening when I'm DAQ using LabView RT compared to using the DAQ assistant (which cannot be used in LVRT). In the DAQ assistant I could just say to acquire 300 samples at a rate of 3000 s/s. The buffer wa
-
Hello.. I have a question about windows 7. I have a free update, and I was wondering if you can help me with this? * title *.GSIRVRI
-
Network Magic with a Linksys WAG54G2
I am trying to disable the network lock so I can uninstall Network Magic 5.5.9118.2 - Pure0. I can't do though, as he says that it cannot configure Network Lock on my router. My modem/router is a Linksys WAG54G2 (1.00.16 firmware version). I heard th