pre-shared key length
Hello
What is the key length maximum for a pre-shared in a VPN configuration and all characters are allowed?
Robert,
The maximum PSK is 129 characters, I have used all types of characters before, without any problem.
HTH.
Tags: Cisco Security
Similar Questions
-
Access point Cisco does not recognize correctly entered the WPA pre-shared key
My router is a Cisco DPC/EPC2325 DOCSIS residential gateway with wireless access Point. When connecing to Internet via a wireless adapter, this device does not accept the good WPA pre-shared key. I have no similar problem with another PC. Please notify.
You mean that you corrected it?
Great! Thanks for sharing this info with us! -
Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type
Type of TG_TEST FW1 (config) # tunnel - group?
set up the mode commands/options:
Site IPSec IPSec-l2l group
Remote access using IPSec-IPSec-ra (DEPRECATED) group
remote access remote access (IPSec and WebVPN) group
WebVPN WebVPN Group (DEPRECATED)FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
FW1(config-tunnel-IPSec) #?configuration of the tunnel-group commands:
any required authorization request users to allow successfully in order to
Connect (DEPRECATED)
Allow chain issuing of the certificate
output attribute tunnel-group IPSec configuration
mode
help help for group orders of tunnel configuration
IKEv1 configure IKEv1
ISAKMP policy configure ISAKMP
not to remove a pair of attribute value
by the peer-id-validate Validate identity of the peer using the peer
certificate
negotiation to Enable password update in RADIUS RADIUS with expiry
authentication (DEPRECATED)FW1(config-tunnel-IPSec) # ikev1?
the tunnel-group-ipsec mode commands/options:
pre-shared key associate a key shared in advance with the connection policyI'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)
Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..
But it would be nice to have a bit more security on VPN other than just the connections of username and password.
If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?
If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?
I really hope that something like this exists still!
THX,
WR
You are welcome
In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.
With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.
-
Hello world
I would like to know if its possible to hide the pre-shared in the router configuration.
By default, you can see clearly if you access on the RV042.
Thanks for your comments.
Kind regards
HDAM
Hello hdam,.
I know, when you are administering and access the configuration of the router and configuring VPN, there is no method (or a check box) to hide the pre-shared away from plain text.
If security is a concern, perhaps limit available for the vpn router management access, so not too many users will know the pre-shared key.
-Andrew link
-
pre-shared key and shared secret
Hello
Pre-shared-key is only used for authentication of the peer or used in calculations of shared secret, too? Is there documentation that explains the whole process.
Hello
According to my notes, VPN, both are used to build a two-way VPN tunnel. IKEv1 is used to the old site-to-site IPsec VPN:
IKEv1 Main mode (Phase 1) using three pairs of messages between peers (making six in total):
* Pair 1 consists of IKEv1 configured on the device security policies: a peer (initiator) begins by sending one or more strategies IKEv1 and receiver pair answer (answering machine) with its political choices.
* Pair 2 includes DH public key exchange: DH creates shared secret keys using agreed on DH group/algorithm exchanged pair 1 and crypt the nuncios (a randomly generated number) that begin their life as first a exchange between peers. They are then encrypted by the receiving peer and return to sender and decrypted using the generated keys.
* Pair 3 is used for authentication ISAKMP: each peer is authenticated and their identity validated by either using pre-shared keys or digital certificates. These packages and all the others exchanged later during negotiations are encrypted and authenticated using shared and agreed by pair 2 policies.
-
Dial backup VPN - pre-shared key question
I use dial backup for my DSL connections in case of failure, but on my host router I also use EZVPN Client VPN access server. Thus the server EZVPN uses xauth for pre-shared key authentication:
ISAKMP crypto key? address 0.0.0.0 0.0.0.0
BUT for my backup of VPN connection to work, I need to use the dynamic IP to the IP address of the peer that requires:
ISAKMP crypto key? address 0.0.0.0 0.0.0.0 no xauth
I tried to set the keys for dial-in subnets, but it always seems to use the default value.
Is this all just not supported or is there a workaround?
My (main) the host router is a CISCO 1841, my remote router is 877.
See you soon,.
Sean
You need to configure ISAKMP profiles on the server Ezvpn router.
http://Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00801dddbb.shtml
Who would do it.
-
Pre shared keys used in IKE Phase 1
Hello world
Need to confirm if we use the buttons pre shared during IKE Phase 1 main mode and aggressive mode
Concerning
MAhesh
The pre-shared key is used in both modes of IKE Phase I. With pre-shared keys, the same preshared key is configured on each IPSec peer. IKE peers authenticate each other computer and sending a hash key data that includes the pre-shared key.
-
Changed my pre-shared-key, vpn doesn't work now
Hello world
I recently completed implementation of the remote access vpn on my asa 5510. the software is v8.2. It was working fine, I was able to connect, able to what whether internally on our network, rdp worked, ping etc. I gave the FCP file to another person in our IT Department to test with me before we rolled it out to our users. He then called me to ask the pre-shared key cause he wanted to implement on his ipad. I then realized that I never made a note anywhere of that pre-shared-key, I used.
So I changed it. Deleted the one in the cli, made a new. Changed the key on my vpn client and logged. I can connect properly. But, now I can't do ANYTHING in-house. Ping does not work, rdp, nothing. I can't even ping the client connected to the asa. Is there anything else I need to do? I have to redo everything because changing it broke encryption or something?
Please help, thanks.
Try to redo the configuration of the tunnel group only.
And the computer should be goodSent by Cisco Support technique iPad App
-
I currently use an ASA 5550 version 8.2 anwith ASDM version 6.2.
I have an ASA 5505 in remote and unable to connect via VPN.
My papers say perhaps unsuited pre-shared key.
On my 5550, via the ASDM I used the command more: execution of the system-config and it will not show my before shared key in plain text format, shows only one *.
Any help would be appreciated.
Hello
The command should work.
I guess you could always consider using the CLI and by inserting the command.
"If that leads to the same result you should probably consider you might have to copy and paste the ' * ' as the PSK real at some point?
I created a ' tunnel-group ' example in my ASA with commands
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
IKEv1 pre-shared-key TESTPSK
ASA # sh run 1.1.1.1 tunnel-group
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
IKEv1 pre-shared-key *.
I discover with "more system: running-config"
ASA # more system: running-config | start the tunnel-group 1.1.1.1
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
IKEv1 pre-shared-key TESTPSK
This works as expected
-Jouni
-
How can configure auronomous with WPA2 pre-shared key access point
I worked with the 4400 WLC series and set up access points aironet 1140, and all work without any problems.but when I tried to configure the autonomous access point I couldn't configure the AP with WPA or WPA2 preshared key and I could configure it with WEP, I want to help here.
Wi - Fi Protected Access 2 (WPA 2) Configuration example
http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtmlPlease rate when useful or appropriate.
-
BlackBerry smartphone WIFI pre shared
I will set up my Wifi on BB 8220 and during the installation I get enter pre shared number? Being a beginner to the network I do not understand the meaning.
I entered in manage connections wifi turned on, then went into setting up wifi network and seen pre shared key. I am on wifi or not. With my first BB, I have entered the livebox security code in the box, and had to change the phone due to battery failure, it's a replacement.
I'm back on emails from when I entered pin no. again.
I don't know if my wifi works.
(Your carrier signal) wireless and WiFi (wireless network, such as a LAN) are two different things.
So, Yes, for the WiFi, you must within the range of the WiFi network.
-
Pre-shared blackBerry Smartphones?
I just got a Curve 8900 and I am trying to set up my wi - fi but I must put in a pre-shared key (PSK) to access. I know my network key but cannot find a pre-shared key. Any help would be much appreciated. Thank you.
Your router asks the pre-shared key... it's something installation you or the owner of WiFi router with the router. It is not a smart phone BlackBerry created password. Check with the owner of the router.
-
Show pre-shared on 125 6.3 (5)
I have PIX 535, using 5,0000 code 125.
is there a show command to see the pre-shared key that a the peer IPSec VPN?
Thank you, Kevin
TFTP-server core /backup
write the net
Jon
-
What is the secret shared key when connecting to a VPN, and where can I find/do.
I'm hosting a VPN server on my windows computer. But when I try of is there to connect, I can't understand what the "secret shared key" what he wants is, and where I can find. I tried for this search in many places. Please tell me where I can find and where I can create. Thank you!
The shared secret is a sort of password. It is defined by the VPN server, then this would be the place to start looking. Personally, I have no experience in running Windows Server VPN service, so I can't be more specific, but I hope that puts you in the right direction.
-
.Sha MD5 and the shared key
Hello world.
A quick question for you guys:
Make a secret key shared md5/Sha use when calculating hash?
Thank you
Hash algorithms in itself nothing as a shared key. But with virtual private networks, hash algorithms are often used for the protection of the integrity in the form of a HMACcode. And here a shared secret is used.
Maybe you are looking for
-
Someone at - it ideas? Backup disk space is only 5% full, so it can't be the issue. Thank you very much.
-
Large Collection of audio book - How to manage?
I have a decently large audio book collection (probably 500 +). Of course, I can't synchronize all, given that the complete collection does not fit on my iPhone. The only other choice is to synchronize partially which forces me to sort through 500
-
HP Office jet 6700 all-in-one printer
My old HP 6500 printer would save the scans as word documents. My new printer 6700 by default to save images in PDF. How I can format documents?
-
Application all-in-one HP and HP 4620
Hello is could someone please inform me what features are supported by the android application for the all-in-one HP 4620? In addition to printing, I'm particularly interested in the sweep of the glass. Thank you in advance, George
-
Activate the Popup Volume?
I am running Windows 7 Home Premium, and I have a HP keyboard with volume up, volume down and cut keys on this subject. I don't know the name of the product of the keyboard, but I don't know the serial number: 5335U. The volume keys work fine, but th