HP Office jet 6700 all-in-one printer

Similar Questions

• Installation for HP Office Jet 7210 all-in-One printer problem

  I try to install HP Office Jet 7210 all-in-one printer.

  My operating system is Windows Vista Home Premium, service pack 1

  My computer is an AMD Athlon 64 x 2 Dual Core Processor 5000 + 2.61 GHz, with 2 GB of RAM and on the 32-bit operating system

  When I go through the guests to the screen, I get two errors.

  (1) is due to an error of operation. As I have Vista it triggers a caveat, but I understand that this can be ignored and continued

  (2) the system can be installed using the "Run As" command... ». Apparently, I need to re - login as administrator. I am connected with the admin privaledges so not sure how to fix this

  Appreciate your help.

  I'm sure that yu you are trying to install from the installation to Windows XP CD. Try to download the software from THIS page and try to install.

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

  I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

  Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

• Re: HP Office Jet J4680 all-in-One Printer

  Help! My hard drive crashed last week and I had a new installed and of course I have to reinstall my printer and of course I have no idea where is my original HP printer disk. Can I download it online?

  The driver is always available online for the Officejet J4680.  Click here (the case in the United States), select your operating system, then download the full feature software and drivers for this printer. If outside the USA, go to www.hp.com/support then type Officejet J4680 on the Green tab software and drivers. Let me know if you have any problems with it. I'm more than happy to help.

• HP Office jet 5610 all in one printer

  Hi, I replaced an ink cartridge and not ok for printing alignment, but when I tried to print a letter then, nothing has been printed. Can someone let me know how to get the printer to work? It will not even get to delete the queue printing. Thank you. Yunsin

  Hello

  Once you press the CONFIGURATION button, then on the printer screen it will list you options.

  Press the arrow key to select the TOOLS, press OK, then

  Press the kew arrow to select clean cartridge or print head cleaning , then press the OK button

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give a Kudos!
  I work for HP

• HP Office Jet J6480 All In One - will not analyze with Mac OS 10,8.3

  I could not get my HP Office Jet J6480 All In One scanner after upgrading to 10.8.3.I followed other positions and have installed the most up to date driver (http://support.apple.com/kb/DL907) , but whenever I try to scan from the HP Device Manager or photosmart studio, it says "sorry, scanner could not be initialized. (scanner not found) "I tried to make sure there is no other updates by clicking settings in the Device Manager by clicking on check the updates but it says 'server not available - service software is currently not available. "Please try again later" and I got this error for the last week.

  I followed the second set of instructions available here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve this problem and install the software found on the link. I restarted my computer and I always meet the same problem.

  Note: My printer is wireless and I have not hooked by a cable. Will make a difference?

  My printer seems to be printing very well.

  Thanks for any help you can provide.

  Sara

  To add, both HP Device Manager or photosmart studio are part of the software and not designed for Mac OS X 10.8 10.5.

  Here are the steps to scan with your printer on mountian lion, make sure to run the software update first to ensure that the latest HP drivers are installed:

  http://support.HP.com/us-en/document/c03550518

  Where the scanning software do not work as expected, that more probably caused by incompatible drivers installed on your system.

  In this case, remember to remove the software by following the HP uninstaller program (under Applications > Hewlett-Packard), rebot Mac and install the correct software by following the steps below:

  http://support.HP.com/us-en/document/c03378792

  Shlomi

• HP Office Jet J4680C All In One is offline now

  Original title: printer offline

  Our printer HP Office Jet J4680C All In One is currently offline. Have checked all the connections and made the troubleshooting steps and we are still unable to print? Help!

  Hi Wally,

  1 have. what troubleshooting measures you tried?

  2. did you of recent changes on the system?

  I suggest you to try the steps in the following article and see if that helps.
  Printer in Windows problems

  You can read the following article and check.
  The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer

  See also:

  Why can I not print?

  Hope this information is useful.

• HP Office Jet 5610 all in one does not appear with the fax

  I got a new computer with Windows 7 when I added my printer HP Office Jet 5610 all in one, it does not appear with the fax.  When I tried to install it with the disc from the printer, he Wouln't install.  What is the problem? I really need on the part of the printer fax.

  Hello

  Try this maybe this will help.

  -Type fax in the research - type on Windows and scan-new fax fax...

• Office Jet 6700 Premium: unable to print from 6700 JO unless I wake up

  Hello

  The appellant here desperate because I cannot solve this ongoing problem.

  System set up:

  Office Office

  HP Office Jet 6700 premium

  Wire in a BT Home Hub

  Laptop HP EVO, running wireless

  Problem:

  I can no longer print the laptop wireless. I need to go to my office and print something. Then only the printer seems to be "awake", and then I can print from the laptop. As you can imagine this is not how it is supposed to be and this causes a lot of frustration.

  The printer is also set for a static IP address (it was to solve other printing problems ). I also checked the firmware, and it is up to date.

  Please tell us how to solve this problem.

  Thanking you in advance

  Wolfgang

  Hi @Klee66,

  Welcome to the Forums of HP Support!

  I understand that your HP Office Jet 6700 Premium do not wake up when you print on it, unless you wake up before hand. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  There could be many reasons why this is happening, so please bear with me.

  I see what your printer firmware is up to date, which is good.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please try Fix It tool of Microsofts, solve printer problems.

  You do not share the printer from the computer desktop you have in sharing files and printing? Otherwise, this could cause part of the problem.

  Do you turn the printer power on and off?

  I can't see what your printer is connected to the BT Hub with an ethernet cable.

  It is possible that the laptop is connected to the printer cannot communicate on the 5.0 GHz network. If they are of the same name that will be confusing.

  Have you tried to configure the wireless and no cable connection on the printer to see if it makes a difference?

  How old is the router, have you also checked to see if the router firmware is up-to-date?

  Is the router dual-band? Two networks are the same SSID for 2.4 GHz and 5.0 GHz? If so, change the SSID to 5.0 GHz to a different name and restart all devices.

  What router do you have to BT?

  I suggest you read this article by BT, I have problems of connection of 5 GHz and features dual band wireless BT Home Hub 4 or 5 Hub.

  I see that you have setup a static IP address. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  While in SAP, open the network tab, and then select IPv4.

  Set the manual DNS on the printer.

  • Set the primary DNS as 8.8.8.8
  • And the secondary DNS as 8.8.4.4

  I would like to try the steps in this guide, HP printers - printer (Windows 8) "offline" Status Message.

  If the problem persists, please see these links or contact BT

  BT.com BT Home Hub 5 Product Details - link

  http://BT.custhelp.com/app/answers/detail/A_ID/46549/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com link - saving on the BT Home Hub 4 and 5 of Hub

  http://BT.custhelp.com/app/answers/detail/A_ID/43669/c/346/session/L2F2LzEvdGltZS8xMzg2NzczMzgzL3NpZ...

  BT.com link - what is the function of Smart Wireless BT Home Hub 3 and Hub 4 Hub5?

  http://BT.custhelp.com/app/answers/detail/A_ID/32235/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com - contact us

  https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjowfQ...

  I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Office Jet 6700: HP Office jet 6700, I try to print it says printer ready, file print empty!

  I have a HP Office Jet 6700. I am trying to print a document, it will say print Untitled. The print queue of the printer will open and say printer is print ready, empty file, Idle.

  It is automatically paused printer. When I try to click on the document itself in the print queue and resume printing it gives the same message.

  Power on the printer flashes slowly as well.

  I hae rebooted my computer and restart the printer completely several times and it still didn't work. I printed just something about this last night so I don't know what the problem is.

  Hello! Welcome to the @Chinadoll702 forums

  I read your post on printing problems you encountered on your Mac running 10.6 and your Officejet 6700. I have some ideas in mind to start and I would like to know the results and we will take it from there.

  Update the firmware of the printer: get the latest Firmware and updates

  Be able to reset the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Make a few copy then and tell me if the copies suspend, cancel, do not work, etc.

  Try to print the text change on your Mac as well and get back to me with the results.

  Good luck

• HP Office jet 4500 all in one - runtime error

  Hello

  I get the runtime error after installation of the software for the HP Office jet one 4500 allin.

  Runtime error

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Setup.exe_HP Installer
  Application version: 13.0.445.0
  Application timestamp: 4a 734121
  Fault Module name: Setup.exe
  Fault Module Version: 13.0.445.0
  Timestamp of Module error: 4a 734121
  Exception code: 40000015
  Exception offset: 000a6def
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 4105
  Additional information 1: 67 d 9
  More information 2: 67d918b5d2dc6eb7485f13ad2e1b79c1
  3 more information: 94e2
  Additional information 4: 94e2063d6d7b27c1f4fa5e4c6677d074

  I'm not an expert but I installed a printer a bit in my life and man, this one gives me grey hair.

  I am running Windows 7 32 bit on a HP Pavillion Multimedia Series.

  I tried with or without Firewall, unisatall reinstall awhile, use the floppy disk or download the software/driver of HP, zit, nada nothig, still the same error

  I hope someone has an answer

  Thanks in advance

  DanD13

  Hello DanD13

  I understand that you have the a runtime error when trying to install your HP Officejet 4500 on your Windows 7 system. I provided you a few steps to try below which should clear up this place for you and you can install the software correctly.

  Step 1. Click on start and open the command prompt

  Step 2. Type %temp% in the field run and press ENTER.

  Step 3. Locate and open the folder starting with 7z (example: 7zS2356)

  Step 4. Open the Util folder

  Step 5. The CCC folder

  Step 6. Run uninstall_L3 (exe or Bat)

  Step 7. Once the uninstall is complete, reboot the computer

  When you computer goes back to the top, try to reinstall your software.

  This should fix your error and get you back up and running. I want to thank you for posting about this on the HP Forums. Have a great day!

• Office Jet 8620 (all-in-one) will work w / windows 10

  (1) work 8620 (all-in-one) Will Board jet w / 10 windows?, I replace a photosmart 2610i w / duplexer.

  (2) for the wireless working, I need something for my desktop computer?

  THX

  Yes the new 8620 Officejet Pro will work fine with Windows 10.

  The drivers are here

• Jet J4550 all-in-one printer scanner function does not not during the installation of Windows 7

  I bought a new computer with Windows 7.

  Since then, I've lost the scan function of the printer all-in-one HP Officejet J4550 that worked fine so far in XP.

  I tried ALL the solutions proposed on the HP Web page without success.

  No idea how to solve this problem?

  The print function still works.  Only scans from the glass or the charger no longer works.

  Thanks for your help.

  Hi Norman,

  Have you tried to update the driver for the printer?

  Otherwise, you can download the latest driver for the printer to Windows 7 from HP website and check if it solves the problem:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3645097

  For troubleshooting, follow the steps in the link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/not-able-to-scan-on-my-HP-OfficeJet-j4550-all-in/24fdaab7-804F-E011-8dfc-68b599b31bf5

  Please keep us informed.

• j Office Jet 5780 all-in-one will not stop printing

  My printer won't stop printing the last thing that I printed on the net.  I closed it works again and continues to print again and again nonstop.  I like google bar installed but had before anyway.

  Try to clean the queue as follows:

  1. Enter the Control Paneland enter the Printers.
  2. RightclicktheHP Officejet J5700 series icon, then click Cancel all Documents.
  3. Make sure that the printer is turned on, if it prints always - let him 1 or 2 pages more that the PC can still in treatment of the cancellation of print.

  Please let me know if this is useful,

  Shlomi