Premiere Pro CS4. File storage question

Similar Questions

• Codecs to generate AVI with Premiere Pro CS4 files?

  I would like some feedback on which codecs you think are the best to generate AVI files. I tend to use Microsoft Video 9 or Indeo 5.10 for most exporters of my AVI, but I was wondering if there are traps with codecs that I don't know?

  My priority is the video quality, but I also care about how many compression, it is (IE, reduce to a minimum the amount of space is consumed on the hard drive), and I want to minimize the time required to export a media file to avi.  Are there other factors should I consider in deciding which codec to use?

  For what it's worth, I am running CS4 on a Windows XP computer.

  Here's what I observed in my tests...

  In the order of the smallest file avi (most compression) to the larger avi file (compression less):

  Microsoft Video 9

  Indeo 5.10

  Indeo 4.5

  Cinepak Codec (AVI is more than triple the size of the Indeo codec)

  Microsoft RLE (AVI is almost double the size of the one generated by the Cinepak)

  Microsoft video 1 (AVI is almost three times the size of that generated by the Cinepak)

  In order of time the shorter 'export' longer-term export times to a 13 second clip of test, with the codec on a maximum quality:

  Microsoft video 1

  Microsoft Video 9

  Microsoft RLE

  Indeo 5.10

  Cinepak

  Indeo 4.5

  As far as I can tell from the eye or video files, the quality that results is similar on all of them, but I'm missing something?  I must admit, I have not looked at the video and sound quality as carefully as I would like.

  Welcome to the forum,

  If the conversion program offers it (most do, but some do not), the DV - AVI (AVI specific flavor) w / PCM/WAV Audio to 48 kHz 16-bit, would be the best.

  Also, there may be something useful in this ARTICLE, even if it was written for PrElements and not PrPro.Still, perhaps a useful tip.

  I also recommend HD of Jeff Belluno to SD TUTORIAL.

  Good luck

  Hunt

• Premiere Pro CS4 Transition handle questions

  Grettings,

  I continue my transition to PP CS4 from a different NLE and translate slowly my techniques.

  I am always sick on certain transitions. I understand that for some transitions "handles" are necessary. For example the default base melted crossed does not appear to do anything without them. However I sometimes created an additional audio track of creating synchronization problems video handles on the main track in order to create a transition. I checked on all sync Flickr photos.

  However, some transitions seem to be working without handles... I just razor video and insert the transition (proper technique). Œuvres without handles and fine audio sync. Certainly easier and less concerned I spoil my sync. I know how to drag changes etc... aim can't marry this knowledge to this fundamental question.

  I'm sure I'm doing something basic wrong!

  I just want to use my transition of choice without fear of ruining a multiple audio track and project multi-video segment and understand when I need to worry about the handles of the video or audio. And when I can just razor and insert a transition.

  Thanks for any help!

  BJBBJB1

  Try to change the Source element long since in the Source window.

  Set points in the source window and then do drag or insert / you cover them to the timeline.  Do this for all the equipment you need from the source element.

  Apply your transitions to lower points.

  The razor tool isn't really the tool for editing.  He is more used to split a clip in the timeline panel so that the Editor could be applied to different fx to every part of the same clip. (for example)

• Premiere Pro CS4 question on how to integrate into my website

  I have a simple question...

  I used the Premiere Pro CS4 to create an Avi file in video.

  And now I need to integrate it into Dreamweaver CS4 to download on my site.

  I never have, so I have no idea on how to do it.

  Could someone send me a tutorial or a site with explanations.

  Thank you

  MAthieu

  www.courtier-Remax.com

  Mathieu,

  I can't answer for first, but if you have, you can use your file avi, and flash flv export file.

  Still includes templates for use with your file menu flash and different sizes of flash export dimensions

  Depending on the size you want your final file and to be.

  Create a folder with everything for you, including the index.html file and all you have to do is transfer the file

  your directory of Web sites and the hyperlink. Voila!

  Sorry, I can't point to specific tutorials for the moment.

• Premiere Pro CS4 feature Questions

  Hey everybody,

  I was thrown in a project that is using Premiere Pro CS4 (we use Roxio VideoWave) and I hope someone can answer a few basic questions (I'm not an expert in the field of the video editing software):

  (1) in the wave of the video, I can easily add photos and movies to a project simply by drag-and - drop from Windows Explorer. First, it seems, the only way I can add photos and videos to a project is to import media, and then drag them from the 'library of project' to the timeline. Is it possible to drag-and - drop a photo directly from Windows Explorer in a timeline? If so, please tell me what stage of base, Miss. :-)

  (2) is it possible to get a glimpse of what will look like a transition before adding to made the transition to film?

  (3) when I add a photo/video library project, I have to hold the CTRL key to have a 'ripple' Insert (for example, push everything into the exit delay). Also, I have to hold the CTRL key to make a 'ripple trim. Is it possible to define these actions by default, so I don't have to hold down the CTRL key for these?

  (4) Lastly (for the moment :-)), in Roxio Videowave I could easily change the volume of an audio clip in the timeline just by clicking on the average line goes through the sound wave and dragging upwards or downwards.) I can't know if there is a similar average easy to do in Premiere Pro.

  Any help is appreciated! Again, sorry if these are basic stupid questions, but the first is currently well above my level of experience.

  Thank you! :-)

  (1) is there a way to drag and drop a photo directly from Windows Explorer in a timeline?

  First, no, it does not - at least since the Explorer himself. You must first import the files (you can drag and drop them in the Panel project/bin) and then edit them in sequence. However, you can try on the media browser; go to window > Media Browser so you don't see it. Media browser will give you an interface of type Explorer that you can use to drag files directly from the folder structure on your hard drive in a sequence; When you do so, they will simultaneously be imported into the project.

  (2) is it possible to get a glimpse of what will look like a transition before adding to made the transition to film?

  Nope; Just try them until you find one you like. Then memorize

  (3) when I add a photo/video library project, I have to hold the CTRL key to have a 'ripple' Insert (for example, push everything into the exit delay). Also, I have to hold the CTRL key to make a 'ripple trim. Is it possible to define these actions by default, so I don't have to hold down the CTRL key for these?

  Nope; those who are wired. It will become automatic for you after a while.

  (4) Lastly (for the moment :-)), in Roxio Videowave I could easily change the volume of an audio clip in the timeline just by clicking on the average line goes through the sound wave and dragging upwards or downwards.) I can't know if there is a similar average easy to do in Premiere Pro.

  You probably don't have the volume adjustments or keyframe activated for your track. Check out the following screenshot:

  

  You can select "Show clip keyframes" (which lets you keyframe other effects via the menu drop-down on the clip) or "Show Clip Volume" that shows just the volume effect. A yellow line appears through the waveform; You can drag up and down to adjust the total volume of a clip, or use the control key and click the rubberband to add nodes or key images so that you can increase the audio. You can also control click a keyframe to germinate the handles so that you ease in or ease the level. Note that you can also select the 'Track' options, but (as his name suggests) to set the level of the entire track and not individual clips.

• Premiere Pro CS4 hungs on importing or opening files

  Hello!

  I have a serious problem with Premiere Pro CS4. I have install on Windows 8, everything goes well. I create the first project and import mov files. First time I tried h284 Canon DSLR raw file. He played really bad. Secondly, I try AVID DNxHD mov, plays too slow, but everything is normal. But shortly after the first absolutely freezing. I restart, try to import the file or open the project with imported files (no matter what codec it is), it freezes again as before. And nothing helped. I tried to reinstall it about 5 times, it has no effect. What is c? Please, help me!

  P.S. I don't know it worked on Windows 7 with MOV of the Canon camera, but I was working with other codecs.

  Update. I found this problem described appears only with files DNxHD. regular H.284 causes different problem - during the first window loses focus (when I go to explorer, for example) first crashes, it's the window disappears and only strange red line stays on the screen. WTF?...

  Post edited by: Anri Orlow

  Need someone to help... more information please click on these links and provide the requested information

  -Information FAQ http://forums.adobe.com/message/4200840

  -Issues effective http://forums.adobe.com/thread/416679

  -How to find http://forums.adobe.com/thread/419406 help

  In addition, you may need to run CS4 in Windows XP compatibility mode

  Search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US to get help from windows procedures

• AVI file won't play in Premiere Pro CS4

  I wonder if someone can show me a simple solution to this problem.

  I did an AVI movie with my Canon Powershot A2100 640 x 480 to 88 kbps and 769MB. After a tutorial of Project http://tv.adobe.com/watch/learn-premiere-pro-cs4/getting-started-02-setting-up-your-first-/ (and more) I can't my video to play. The games sound but the video portion is not... It does not correctly play with Windows Media Player

  As a separate trial, I ran my video using Adobe Media Encoder CS4 export to another AVI file and this file will play in Premier Pro. The only difference is that I exported it without the audio.

  Any thoughts?   My goal is to change the sound and hopefully reduce the size of the file so that it will be able to my site web watch.

  Thank you for your time

  Ralph

  For a film MJPEG, another popular CODEC is the Morgan.

  Good luck

  Hunt

• Premiere Pro CS4 Capture question

  Hi all

  I am currently using Adobe Premiere Pro CS4 and I'm trying to use the option "Capture" to transfer files from my Panasonic HVX-170 P2 HD, but it doesn't seem to work.  I have the camera in PC (USB) mode and my laptop recognizes that the camera is mounted as a hard disk, but still the "Capture" option indicates the device is offline and I can't transfer.

  Any thoughts?  Thanks in advance!

  Welcome to the forum.

  Like an injury, you must copy your files via USB to the laptop. Caveat here: copy the structure of the entire folder of your map - all of this.

  Then, you import these files, not to capture.

  Good luck

  Hunt

• Transfer of files from different computer Premiere Pro CS4

  Hello all, new to this forum. I have problems to transfer files on another computer running the same version of Premiere Pro CS4. I can see all the elements and the fades etc, but the audio and video files are missing. Thanks in advance for you help. Keith

  I am pleased that you guessed it sorted.

  The other workflow is to locate the transferred project file and the media on the same drive letter on the second machine. So, no reissue of links.

  I carry tons of projects between computers through the external HARD disk. Each is given the exact same drive letter of the operating system on each computer. Works a treat.

  Good luck

  Hunt

• Export of parameters (Premiere Pro CS4 with Matrox)

  Premiere Pro CS4

  Canon XHG1 camera (HDV/Mini-DV/NTSC)

  Card Matrox RT. X 2

  HP's Z800 with Intel Xeon 2.4 GHz, 12 GB of RAM and running Windows 7

  I have experience with digital video editing in first, export up to 40 minutes the videos (which took maybe 2 hours for export), but the last version I used was perhaps first 7 and I didn't have the Matrox card (and used a much less powerful than this computer). I used as just a level of consumption, not the big Canon camera. Now, I try to export the video and there are more choices that I had before, and it seems that the time estimated to export is quite high, despite a good machine and the Matrox card.

  So my question is, is there anywhere a chart that shows what settings to use for the particular output you are looking for? For example, what should I choose for the web that's enough quality but not a giant file? What should I choose if I want to make a DVD? Is it possible to export directly to a DVD, if you do not manipulate the video at all? I said, I should be able to use the Matrox card to reduce the time to export, but it seems that at least 5 times the length of the video export anything.

  I guess a question important here is: what is the normal amount of time I should expect something to take to the export? I have a 2 hour video that just needs to be transferred from mini DV tapes and engraved on a DVD - no necessary effect. Time to export the lowest estimate I can get is about 10 hours, and I don't know what that looks like in terms of quality when finished.

  In the future I'll do more often in short (2 minutes or less) video for the web, so time for export should be short, but I would still like to know what are the best settings and how much time it should take.

  I hope this makes sense - thanks for your help!

  Geneviève

  The major bottleneck appears indeed disk I/O.Even if you have two physical disks in the system, Win7 consider them as a single disc, because they are attacked as a raid1. For performance optimal disc I suggest you to add at least two physical disks + 7200 RPM (so SAS or SATA, the latter cheaper, the first with a best performance), move the pagefile and projects and the cache of media in one of the discs and the other disk media. Which will improve your results significantly in my opinion.

  Then have a look at the two latest guides here, storage and tuning: How to get the best from a PC? Some guides...

  The setting guide was written for Vista, but the Blackviper site now also has a guide for Win7 services.

  I hope this helps.

• Sync during compression HD FLV and F4V in Premiere Pro CS4

  Hello.  I am trying to create messages of public interest for You Tube initially created with a small device that produces Quicktime HD files.  For YouTube they do not have to be perfect, but that's what I'm working with.  My computer has only 4 GB of ram so I can't watch the video to test synchronization because it gives just a slide show when editing.  He never does anything, but a slide show with HD video.

  When I watch the original unedited Quicktime file synchronization was distant.  When I visited the original file in FLV and F4V formats, just to test the synchronization it is PERFECT.  Then I edited the first video from this session and FLV used and the timing was PERFECT.  So I do the second video synchronization, tested on the original film and its PERFECT.

  So I thought it was okay to continue.  Everything was perfect after that first made the raw images. The first video worked, right? Synchronization of the raw images of the second video has been fixed, right?

  Now that I spent all the time to edit the 2nd video, sync is TERRIBLE.  I have no idea why.  F4V was worse than FLV, but none are ideal for 2 video.  So I guess I have two questions:

  (1) what format should I use to upload to YouTube which does not give me a unusable timing problem

  (2) is there something I can do to see continuous synchronization in Premiere Pro CS4 without updating my equipment?  I use Vista 64 bit, 4 GB of ram, dual-core intel.  What I have to do a significant hardware upgrade just to get HD video do not make a slideshow during first execution?

  Thank you!

  AVI file to the private mssg link... 1 gigabyte, takes about 30 min to DL - look and tell me if synchronization is better or worse you know... or the same thing... without you looking at this file and checking against your own there would be no way of KNOWING what (compared to what you met).

  IF THE AVI IS BETTER... What are the steps

  project settings and description of the measures shown below...

  CineForm (neoscene) can handle that sort of thing of conversion, but I do not have this program... most of this will be explicit from the images...

  

  

  

  Here's the info from mediainfo avi export

  

  below is the description of steps

  -------------

  easyShare measures taken

  his program (I used soundforge) allows re - sample 16 kHz sound for wav file (wav pcm) to 48 kHz and 32 bit floating point.

  record in stereo or mono (stereo may turn into 2 mono channels when they are imported in preview)

  Import original mov file to the new project, untie her, remove its import wav and put on wav chronology... link to the video.  I increased the volume on an audio file with conversion just for my own satisfaction... you can do what you want the audio file also (re: filters etc)

  The file size will be HUGE... as you're now away from the advanced mpeg 4 HIGHLY compressed format of your original footage...

  However, it is OK to HAVE BYTES COUNT FILE AT THIS POINT HUGE...

  You can then IMPORT the AVI file that you exported in first for your mounting--(je commencerais nouveau projet pour cela) with very little "loss" of original quality - most of the humans would be able to tell any difference between the quality of the original and this AVI file... (I can't).

  After you change the avi file or files to export as flash or anything else you want...

  ---------------------

• Import .mp4 on Premiere Pro CS4, unsupported

  Hello

  I use trials of Premiere Pro CS4 on XP with SP3.

  I can't import MP4 in first file, error: unsupported file format.

  The videographer said he uses CS3, can just drag and drop in the first.

  Do I need to install Quicktime or other software to make unwearable? Or any other suggestions please?

  Thank you

  video codec in this mp4 container?           MPEG
  What version of the body?                             CS4 as stated in the header
  tried to update the body?                        Not possible with a trial version

  If you reply, please try to get the info from the original position. Have already answered your questions.

• Premiere Pro CS4 is quickly eating my hard drive!

  Hey all,.

  So, I was working on a video with my trial version of Adobe Premiere Pro CS4. I initially had 28 GB on my internal hard drive on the left. After you import a bunch of videos and their abutment, I noticed that kept first in line with some videos again and again. I didn't think much, because my source files (where I save the .prproj and video files) are on a drive terabyte external hard. When I finished my project, I go to my computer and see that my internal hard drive has suddenly been reduced to 3.1 GB! I don't know where the other 25 GB disappeared.

  What exactly does first only when he says it's the video compliant?

  In line to make the audio portion of your video stream can be changed. If you external is not an eSATA drive, you're in for a lot of grievances, hiccups and trouble with much too less space on your drive C. improve your disk configuration.

  How to get the best from a PC? Some guides... and look specifically for storage guide.

• Only Premiere Pro CS4 No 5.1, as stereo DolbyDigital surround sound!

  Hallo,

  ICH habe ein Projekt eroffnet in Premiere Pro CS4 mit DolbyDigital. Habe meine AVCHD Videomaterial exported mit 5.1 Surround importiert. Die Soundspur wurde auch kreatin ind die 5.1 Soundspur eingefugt. Exported habe ich über den Adobe Dynamik Link mein gesendet Projekt an Encore CS4. Sleeps habe ich ebenfalls ein Projekt eroffnet mit dein Einstellungen und DolbyDigital DVD. Ein Menu standing und exported auf DVD ausgegeben. Leider habe ich auf der DVD nur DolbyDigital stereo! Warum? Was mache ich please?

  Vorab vielen Dank fur eine Antwort.

  Hello

  I opened a project in first pro CS4 with Dolby Digital. If my AVCHD videomaterial with 5.1 Surround imported thereafter. The soundtrack was also inserted correctly in the trace of 5.1. Subsequently I sent on the Adobe Dynamklink my project in Encore CS4. Here, I also opened a project with your settings DVD and Dolby Digital. Spent a menu provided and subsequently on DVD. Unfortunately, I have on the DVD only Dolby Digital Stereo! Why? What do evil?

  Thanks in advance for the answer

  Hallo Torsten,

  JA, ich spreche deutsch aber ich wohne in den trail, in Rotterdam. ICH habe das Glueck gehabt is in der Schweiz zur Schule zu breast und noch deutsch oder sogar baernduetsch zu reden rooms room. Mein Vater und meine Tochter beiden leben in der Schweiz, exactly how different friends. Also, deswegen...

  Die Mitarbeiter Adobe haben deine question naar nicht ganz understand. Es ist richtig, dass of the 5.1 Audio still ausgeben kannst ohne plugin von, aber sie haben sich nicht die question gestellt offers sharp Audio in 5.1 Format herkommen soll. Sie haben einfach angenommen, dass schon ein 5.1 Soundtrack zur Verfuegung ACE. Dazu die zur plugin add over-codes Ausgabe von PR nach FR.

  Die die unkontrollierte Knackser ACE, oefters kommen vor. Meistens ist das zu fuehren auf Geschwindigkeit drive ungenuegend back. Of the you can taste die zu entfernen, PR ab zu schließen, media Cache PR Rubis zu starten und dann wird alles Rubis indexiert, und consistent PEK files werden Rubis available. VIELLEICHT hilft das.

  Hallo harm,

  The deutsch sprichst. Damit ich jetzt nicht gerechnet had. Actually bin ich auch davon ausgegangen, dass mein schriftliches Englisch ist misserabel!

  Danke managed as your Antwort und das offer Dir eine zu dürfen, wenn ich noch eine question haben should send PN. ICH habe vor Wochen eine Hochzeit gefilmt some mit meiner Sonykamera und bin fast verrückt geworden, dass ich das mit 5.1 nicht hinbekommen habe. ICH habe meine drei aufgebraucht und werde mir die Freischaltung of SurCode holen nun Tests.

  Eine question had ich noch, die mich momentan valet. ICH habe in the last weeks different photographs getatigt. Wenn ich mein withdraw in Premiere Pro importiere, habe ich im immer wieder unkontrollierte Knackser sound. Wenn ich mir is das Originalmaterial, z. b. mit dem VLC-Player anschaue, sind keine Knackser available. Hello from the eine Antwort oder idea is. DAS Soundmaterial liegt wieder in 5.1 vor.

  ICH habe auch already mit Adobe u. a. wegen diesem problem Kontakt thrilled, until von sleeps erhalte ich keine Antwort form. Wanted mir auch weiss machen, dass ich die mit dem still mein video in 5.1 ausgeben kann und kein plugin email.

  P.S.: The Lebst actually in Deutschland?

  Grüße Torsten

  Uebrigens, offers the actually soo? Star dies zu:

  Von der Weser bis zur Elbe,.
  Von dem Harz bis year das Meer
  Are Niedersachsens Söhne,
  Eine feste Burg und Wehr
  Fest wie unsre Eichen
  Alle Zeit wir stand halten,
  Wenn storms showers
  Deutsche Vaterland Ubers.
  Die sind wir Niedersachsen,
  Sturmfest und erdverwachsen,
  Heil Herzog Widukinds Stamm!
  Die sind wir Niedersachsen,
  Sturmfest und erdverwachsen,
  Heil Herzog Widukinds Stamm!
  

• REINSTALL PREMIERE PRO CS4

  MY QUESTION: WHAT to DO FOR FREE AND end UP re-installing. MERCI.

  
  

  SUCCESSFUL FORMER INSTALLATION OF PREMIERE PRO CS4: 2012 (SAME THIS LAPTOP).

  
  

  1/ HARD DRIVE WAS NOT ABLE TO WORK DUE TO CAPACITY USED ON PART C: ONLY 200 MB LEFT 80 GB. MAINLY DUE TO THE SIZE OF THE SOFTWARE FIRST PRO WITH THE HELP OF 9, 36 GB.  IMPOSSIBLE TO EXTEND THE SIZE OF HD PART C: MORE THAN 80 GB.

  
  

  2 / UNINSTALL PREMIERE PRO CS4 DECIDED BY ME TO FIND SPACE ON THE PART C.

  FOLLOWED BY UNINSTALLATION PROCEDURE: IMPOSSIBLE WITH THE PANEL, CS 4 DELETED C: PROGRAMS SOFTWARE WITH CODE NUMBER ASKED / STILL APPEAR AFTER ERASING ON PANEL OF CONFIGURATION/PROGRAMS AND FUNCTIONS FOR 9, 36 GB. AFTER UNINSTALLING 2 GB LEFT... SO LITTLE SPACE THAT I DECIDED TO CHANGE THE HARD DRIVE.

  
  

  3 / CHANGE OF HARD DISK: 240 GB SSD INSTALLED WITH THE MIGRATION OF THE SOFTWARE (INSTEAD OF HD THANKS). EVERY THING OK.

  
  

  4 / re-SETUP ON SSD OF PREMIERE PRO CS 4 FROZEN AFTER ACTIVATION "" AUTOPLAY. "." EXE' TO INSTALL ADOBE DVD N ° 1. MESSAGE MENTIONS: "AN ERROR OCCURRED DURING the installation of this DO CAN CONTINUE? ." " CONTACT THE Adobe CUSTOMER SUPPORT DEPARTMENT".

  CV IN ENGLISH
  

  I'm looking FOR a REINSTALL PREMIERE PRO CS4 ON THE SAME PC I CHANGE HARD DRIVE TOO SMALL (PARTITION C :)) POUR DO FON SELECT CS4 (REPLACEMENT HDD SSD rap). I HAVE A CODE WHEN UNINSTALLING BUT I DON'T HAVE IT. WHEN LEN () OF THE PRODUCT ON MY PROFILE, WE ME SAID THAT THIS NUMBER ALREADY EXISTS. AFTER THE VERIFICATION OF THE WINDOW SYSTEM. I RECEIVE MESSAGE FOLLOWING: ERROR DURING THIS CANNOT CONTINUE CONTACT SERVICE CLIENT INSTALLATION.

  HAVE YOU EVER ENCOUNTER THE SAME PROBLEM, THANK YOU FOR YOUR HELP.
  

  All uninstall cs4.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  try to install again.  If you use an installation cd/dvd, copy the contents of the drive in a desktop folder and install from this directory.

• Premiere Pro CS4 dynamic link to Encore CS4

  I transferred a still CS4 Premiere Pro CS4 project via dynamic link.  I tried to play the scenario but only the sound plays video remains still each time that the marker is placed on the timeline, but the marker moves.

  Can anyone suggest what is the problem?

  Stephen Terry

  I do not understand: the marker moves?

  I leave Dynamic Link out of the picture.

  Export of first with a "Preset" mpeg2-dvd. You can change the speed of transmission a little upward.

  Import these two files (audio and video) in again.