PREMIUM HP: HP PREMIUM: Howto recover a CASE FUNCTION

Similar Questions

• Case function can be used as a parameter when calling a procedure, please advise...

  Case function can be used as a parameter when calling a procedure, please notify

  The daily procedure is called with the parameter 3 following one of the parameters using a function box between them as shown below.

  Daily_Ins (c1.p_mtrid, c1.p_UOM CASE WHEN "KWH" THEN 1 ELSIF 'KW' THEN 2 END, v_dateHold);

  In my opinion, using decode is illegal, so I think that I cannot say something like :

  Daily_Ins (c1.p_mtrid, ( decode c1.p_UOM, "KWH", 1 'KW', 2), v_dateHold);

  I think I just found something on the net

  SQL > DECLARE

  2 wages NUMBER: = 20000;

  3 employee_id NUMBER: 36325 =;

  4

  5 PROCEDURE give_bonus (emp_id in NUMBER, bonus_amt number) IS

  6 BEGIN

  7 DBMS_OUTPUT. Put_line (emp_id);

  8 DBMS_OUTPUT. Put_line (bonus_amt);

  9 END;

  10

  BEGIN 11

  12 give_bonus (employe_id,

  13 CASES

  14 salary when > = 10000 AND salary<=20000 then="">

  15. WHAT salary > 20000 AND salary<= 40000="" then="">

  16. WHAT > 40000 salary THEN 500

  17 0 OTHERWISE

  18 END);

  END 19;

  20.

  PL/SQL procedure successfully completed.

• Help with a case function

  Hello

  I want to create a function box where column2 is based on the value of Column1.

  For example, the table below

  On the underside, I would ask something like

  Select status, description, l3_days, (case when status = 'Open' and DEV_DAYS = null THEN L3_DAYS = 'LOGIN_DATE-SYSDATE' WHAT status = 'open' and DEV_DAYS! = NULL THEN DEV_DAYS = L3_DAYS ELSE LOGIN_DATE-L3_DAYS-SYSDATE, DEV_DAYS END)

  

  Not sure so clearly. Basically, I want to L3_DAYS and DEV_DAYS to be updated automatically based on the login_date. I plan to add a DEV_START_DATE column, which would facilitate the calculation of DEV_DAYS

  In any case I want to know how to write a case function, where denotes Column1 Column2?

  Thank you

  There are two CASE statements like this

  select status
       , description
       , case when status = 'Open' and dev_days is null then LOGIN_DATE-SYSDATE
              else l3_days
         end l3_days
       , case when status = 'Open' and dev_days is not null then LOGIN_DATE-L3_DAYS-SYSDATE
              else dev_days
         end dev_days
  

  If this isn't what you are looking for you need to explain your best condition. Provide a CREATE TABLE script and INSERT a TABLE for examples of data and provide a few example expected output.

  Also please read Re: 2. How can I ask a question on the forums?

• CASE function is allowed in forms 6i?

  Hello
  
  CASE function is allowed in forms 6i?
  
  Thank you
  ESL

  Hello!
  The case statement come first with the Oracle 9i database.
  In Forms 6i, it won't work.
  Concerning

• HOWTO recover Toshiba Satellite 4070 CDS using TSetup...

  Hi all

  I'm trying to restore the laptop to my uncle. Due to the fact that he had lost his cd player (cd player was not displayed in Explorer, more)

  Instead of messing around with drivers, I suggested that it would be much easier and better (new installation) to recover the pc.

  Only one problem: it seems to be a password in the bios when I restart the pc and press "Esc". This means that I can not change the boot order and currently the laptop only starts the disc and its hard drive. Note: he told me he never install a bios password and in this case, you may not know...
  The thing with pressing 'C' when the bootable recovery cd is that it does not work neither.

  Next thing I tried was implemented in windows 98 using a windows 98 Startup disk resulting in the same problem as above: after the installation of windows 98 has no found CD-ROM.

  My latest idea was to take a look on the "TOSHIBA Toole & utilities CD" where I found a folder (G:\COMMON\MANUAL\DUTCH\DISK1) that seems to be a bootable Win98 floppy with custom code. I tried this and bingo... I start.

  After starting it the "Toshiba companion disk utility" screen appeared where I had the option of setting up your computer.

  Only problem: it is said:
  "TSETUP cannot be used when the level of security is USER. only a SUPERVISOR can use this utility. Press any key to continue... »

  You are my last resort, and I hope you can help me out here...

  Thanks in advance,
  Ronald

  Post edited by: rdehuyss

  Hello

  As far as I know, this utility (TSETUP) was placed on the companion disk.
  This utility allows you to enter the BIOS menu.
  To start the tool, you must start MS-DOS then TSETUP mode.
  But if the BIOS password is enabled I don t think that it is possible to enter the BIOS.
  Unfortunately, in this case, the only way is to contact the ASP to remove/change the BIOS password.

  Good bye

• NO PREMIUM... Logarithmic function with different bases other than e/10?

  Is this possible?

  Yes.

  But without more details about what you're really asking this response many not be useful.

  For example, if you ask "can I type logb (5.2) and get 2.3219..." then Yes. If you say "I would by default change all the calculations of Basic for my band-aid solutions", you can get a completely different answer.

• To get all records using the CASE function

  first_tbl
  
  First_dt second_dt point
  1 January 09 item1 1 July 09
  April 1 09 item1 1 December 09
  1 July 09 31 December 09 item1
  December 15 09 10 May 10 item1
  March 20, 12 10 August 12 item2
  July 31, 12 15 December 12 item2
  April 1 09 31 December 09 item2
  
  second_tbl
  
  Start_dt point end_dt flag
  August 1 09 1 November 09 item1 null
  2 November 09 1st December 09 item1 null
  1 December 09 15 December 09 item1 null
  December 15 09 31 December 09 item1 null
  1 January 10 10 May 10 item2 null
  10 May 10 December 31, 10 item2 null
  1 January 12 March 15, 12 item2 null
  March 20, 12 31 July 12 item2 null
  
  I need o/p so that, if first_dt or second_dt between start_dt and end_dt, I need to make the flag as y (item is the common join) other wise 'n'.
  
  I was able to make the flag go ' but not ' don't
  
  Select A.first_Dt, A.second_Dt, B.Start_Dt, B.End_Dt, A.item, point.
  
  Cases where B.falg is null
  Then "n".
  Else 'Y '.
  End
  Of firsttbl A, second_tbl B
  Where
  A.Item = B.Item
  
  and
  
  ((A.first_Dt > =B.Start_Dt et A.first_Dt < = B.End_Dt))
  Or
  (A.second_Dt > =B.Start_Dt et A.second_Dt < = B.End_Dt)) ;
  
  Please kindly help me to resolve this bug.
  
  Thanks for your help in advance!

  select f.first_dt,f.second_dt,s.start_dt,s.end_dt,
         case when
               first_dt between start_dt and end_dt
             or
               second_dt between start_dt and end_dt
              then 'N'
             else 'Y'
         end flag
  from first_tbl f,second_tbl s
  where f.item = s.item
  

• OBIEE-casting date of char in the case functions

  Hi all
  
  I'm trying to implement this scenario in the Oracle replies:
  
  Decode ("dim1".start_date, NULL, 'NA', "dim1".start_date)
  
  I wrote something like this in the responses:
  
  CASE WHEN 'Dim1'.start_date IS NULL THEN 'NA"ELSE"Dim1'.start_date END
  
  I get the error here as "NA" is of type string. If I do this:
  
  WHEN "Dim1'.start_date IS NULL THEN perform a CAST of CASE ("NA"AS the DATE) ELSE 'Dim1'.start_date END
  
  I works great... but what a way to encode this scenario? Help, please
  
  Kind regards
  Neha

  Try this
  CASE WHEN "Dim1".start_date ELSE IS NULL THEN "NA" cast ("Dim1".start_date as char) END

  It's now in char type

  To keep date type

  CASE WHEN 'Dim1'.start_date is NULL THEN 1 January 1970 "ELSE"Dim1'.start_date END
  or
  CASE WHEN .start_date IS NULL THEN timestampadd "Dim1' (sql_tsi_year,-40, current_date) ELSE 'Dim1'.start_date END

  If brand aid

  Published by: Srini VIEREN on March 25, 2013 09:46

• What case function

  Hello
  Why Form Builder doesn't support case which function? Is another way?

  CASES is more effective than IF... ELSIF and is available in PL/SQL Server-side.

  So, you could write code in a procedure stored (within a packet) and call it from the form.

• How to recover my editing functions, copy and paste, without doing a restore?

  When I switched to Firefox 4 I have more the file, edit, etc. anywhere features. I can not or do not know how to copy and paste websites to emails for example without editing functions.

  Looks like you have the hidden menu bar.
  If the Firefox (orange - top left corner) button is visible - click it and go to options and check menu bar.

• HOW TO RECOVER SPACE HDD ON WINDOWS 7 HOME PREMIUM, 350 GB UP TO 88 GB

  I NEED TO KNOW HOW TO RECOVER MY HARD DRIVE SPACE, I HAD 350 GB NOW I'M 88 GO, I HAVE WINDOWS 7 HOME PREMIUM

  In this case, Norman, I recommend that you get the assistance of first-hand.  I don't think we can help you here corrected.

• Win 7 (x 64) no family Premium BSOD 0xF4 no Dump

  I recently built a customized desktop.  Here is the card with links from Newegg in case more is needed:

  Software - Windows 7 Home Premium (64-bit)
  Case - Thermaltake Level 10 GT

  CPU - Intel Quad-Core i7-3770 K Ivy Bridge (3.5 GHz)

  Graphics card - EVGA GeForce GTX 670 2 GB

  Motherboard - Intel Z77 DZ77BH-55 K

  Memory - Patriot G2 16 GB (2 x 8 GB) DDR3 1600

  Solid State Drive - 128 GB SATA III Crucial M4

  Hard drive - Seagate Barracuda 1 TB 7200 RPM / MIN SATA 6.0 GB/s

  Wireless adapter - adapter to N TP-Link TL-WN951N wireless

  Power - Cooler Master Silent Pro hybrid 850W
  Disc 1 - LITE-ON Blu-ray
  Disc 2 - DVD/CD Sony
  This is the first computer I built, so I was very happy when everything worked the first time.  The only changes from the BIOS, I did were the profile of time and memory (the new profile has been provided by the manufacturer - no custom changes have been made in the case).  I installed windows and then formatted the drive twice because I decided that I wanted to do something different.  On the third installation, I used a NTFS junction to move the Users folder on the second disc.
  C:\ (SSD - system)
  D:\ (1 TB HDD)
  It seems to work pretty well until I've had the occasional BSOD.  He always says "a process or thread crucial to system operation has unexpectedly released or ended."  Error code was 0x000000F4.  The first parameter is 0 x 3, so it is a process.  I changed the memory profile to default in BIOS, but the BSOD kept returning.
  I had trouble getting Windows updated after that, and after a few fruitless troubleshooting, decided to reinstall everything Windows once more.  Now I'm on my fourth install (user is back on the SSD for now) and I still get the BSOD with the same mistakes.  The BSOD doesn't dump any report or restart the computer, either, so I have no additional information to work off of.  It happened during update, download, market at idle and start, leading me to believe that it's a hardware problem.
  All the drivers are up to date (except maybe the wireless card since the site of TP-LINK is down).
  All Windows updates have been installed.
  SFC indicated no error.
  MemTest86 + not reported no error (single-pass).
  ChkDsk (read-only) reported no error.
  However, ChkDsk on restart gives me a BSOD before she can finish.  This one says "BAD_SYSTEM_CONFIG_INFO" with the error code 0 x 00000074.  This leaves me wondering if there is a problem with the RAM.  Is it possible that MemTest86 + does not report an error and the memory still be defective?
  Some resources also suggested that the 0xF4 error could be because of a bad SATA connection between the motherboard and the SSD (in this case).  The SATA cable is not hold on very tight ports hot in my case, but it seems to stay very well.  This could also be the problem
  ?
  Other resources also suggested that 0xF4 error could be caused by a timeout during the awakening of the computer from sleep mode.  I did, however, without a BSOD.  I think that the problem must be with the processor, RAM or SSD.  I think of RMAing the memory, but I want to assure you that it is RAM before I head to the College.
  Thanks in advance for any help!

  I have not deleted IE in one installation, but I used Google Chrome when able.

  I just installed Windows 7 Ultimate cool (with a touch of quick access for now).  I installed the mobo drivers, graphic drivers, then the driver wifi - all this without a network connection.  I did not connect to any network after installing the wifi driver, but it crashed shortly after anyway.
  Don't know what to do with it.  Nevertheless, I do a recovery of the system right now to remove the wifi driver.
  EDIT: It has crashed already after that.  Now I get to before the graphics drivers.

• Tried to update in Windows Vista Home Premium, stuck in the "Configuring updates" and "reboot" loop 11/05/2011

  Hello! I have a portable M-6752 Gateway under Vista Home Premium.  It was perfectly functional this morning 11/05/2011.  Then I noticed the sign (of exclamation in a circle) who said the new updates.  So I started the update and thought nothing of it.  It was until an hour later and I realize that my laptop was still updated.

  Right now I am stuck in a loop between "Configuring updates: stage 3 of 3-0% complete.»  Do not turn off your computer' and auto restart.
  I tried to restart in 'safe mode' and 'safe mode with network.  These attempts did not help.  I'm still stuck in the loop and my laptop is overheating.  The only thing I could do was to be able to.  Fact that several times already.
  Fortunately, I have another laptop and is able to ask for help.  Can someone help me?  I'm NOT a technical person.  Thank you.

  Thank you, but my laptop WAS running Service Pack 2 when this problem happened.  It has been resolved.  For anyone having this problem, here is my experience and solution.

  When I found myself stuck in a loop and my laptop keeps restarting without giving an error message, it began to overheat.  I turned off.  When I turned on it again the screen "Advanced Boot Options" appeared.  I chose 'Safe Mode'.  Then, I went to "Configuring updates...". ».  Machine started himself reboot again.  It happened a few times.  Finally I had to turn the phone off again.  All of a sudden when I turned on again, the "Windows Error Recovery" screen comes on.  There is a choice, 'Launch Startup Repair'.  I chose this.  Machine asked me if it is allowed to create restore point.  Of course.  Then I GOT!  I was saved by Windows self-diagnosis program.
  If you are not familiar with the screens that I mentioned, please search 'screen name' and the word 'image' as a whole.  You will see what these screens look like.
  Now I realize there is another way to reach the Startup Repair.  When you turn on again, press the F8 key several times.  Which will bring you to the early Startup Options screen.  On advance Boot Options, there is a choice 'repair your computer', scroll down to this choice, press ENTER.
  Turning off my machine during the restart is another way to force the "early start Options" screen appears.
  I read that some do not have the "Repair your computer" option according to your PC in the screen «In advance Startup Options»  You will need to know how to get to the "Windows Error Recovery" screen.
  As a last resort, you can restart Vista recovery disk.  Many manufacturers do not understand that when they send the PC for you.  However, it is available for download for free on the internet.  You can download and make your own within 30 minutes.  I hope this helps!

• W7 does anytime upgrade from Home Premium 64 64 Pro fails

  My Home Premium 64 fully active and functional system is unable to upgrade to 64 Professional with no more than a suggestion to go to the Support technique Microsoft with my product ID. What can I do?

  It is a job perfectly 32 GB MSI P67A - GD65 Core i7 system with a Windows 64 bit Home Professional OS installed OEM PID 2600 k.
  I need this to go from 16 GB to 32 GB.
  We bought the Express Amazon upgrade key and installed according to the instructions...
  I think it's even showing a new PID on the system Page. Maybe...
  It is supposed to work, right?
  It's almost - it install and updates and shows the percentage completed, and then it restarts and finally shows a 98% completion, after which it fails and comes back.
  That is what it is?
  Ed Whittemore

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this also applies to the VL (Volume License), - MSDN Academic Alliance (MSDNAA) or products keys that do not work and take over the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Recover files that were deleted from the Recycle Bin

  I need to recover a word file that has been deleted from the Recycle Bin.  An easy way to do this?

  It is not really easy, but it may be possible (depending on whether or not the file has been replaced and a number of other factors).

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky.  They have so-called saves shadow copies, which are deleted or modified files that can be recovered in case changes/deletions made by mistake.  http://www.Microsoft.com/Windows/Windows-Vista/features/shadow-copy.aspx more information about how to use this feature to: http://blogs.techrepublic.com.com/howdoi/?p=145.

  If you have Vista Basic or Premium of Vista, shadow copies is not available; However, there is an alternative that is free and the shadow copies feature called Shadow Explorer. http://www.howtogeek.com/howto/windows-vista/recover-files-with-shadow-copies-on-any-version-of-windows-vista/.  Although it will not help you this time, it could very well save you in case this happens again.

  In case this does not work (not all files are available through shadow - it occurs periodically), here are some additional free recovery programs that might help:

  http://www.r-TT.com/

  http://www.SnapFiles.com/get/DiskDigger.html

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://www.SnapFiles.com/get/undeleteplus.html

  http://www.Piriform.com/Recuva

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - a - MCSE/MCSA/network + / A +.