Preparation of materials for IZ0 - 147

Similar Questions

• syllabus for iz0-147

  Hello.
  Can anyone pls give me syllabus review oracle IZ0-147... I tried searching on the net... I don't have any good program.
  And also tell me any book wch shd I want to talk about?
  
  THX in advance

  Shubhangi says:
  Hello.
  Can anyone pls give me syllabus review oracle IZ0-147... I tried searching on the net... I don't have any good program.

  Well, I looked for 1z0 - 147 with google and it gave me:

  [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=1001&lang=US&p_exam_id=1Z0_147]

  as best result.

  And also tell me any book wch shd I want to talk about?

  There is no book directly to the review, well as the old and difficult to obtain ISBN-13: 978 - 0072193367 will cover 70/75% of it (this book was for a review earlier).
  For non-couvertes, see the manual of documents online or, for example, ISBN-13: 978 - 0071494458. Don't blame me if you think that the two books are garbage!

  THX in advance

  You should watch 1z1-144/1z0-144 as an alternative, although there are fewer books for this. See my recent thread.

  Also most of the answers can be obtained by digging of [www.oracle.com/education/certification]
  and see also [http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html]

• How is it that windows movie maker has prepared a video for playback quality

  It was not used to do but now she prepares to video for playback quality, I don't want to I know that sounds strange, but it takes forever to do if there is a lot of videos or if the video is long so how can I disable this function I updated and since then there this preparation video message and I want to know how to turn it off and I tried to uninstall it and reinstall it but when I get it installed, once it has always the same thing, I don't know how to get out of there so I don't have to wait if a long time when I have a movie to do and my computer is fast, but it's just that it takes ages to prepare the video if I have a long movie , so if someone could help me I would really appreciate it

  Just a guess...

  Have you ever used Windows Vista Movie Maker 6
  and are now using Windows Live Movie Maker?

  Try to return to Vista Movie Maker 6... It should always
  be available in your Start Menu.

• When you try to perform a new installation of Windows Vista, it hangs on "preparing the installation" for hours, no progress.

  original title: FEE INSTALL WINDOWS VISTA

  FRESH INSTALL WINDOWS VISTA COMES UP please WAIT a MOMENT WHILE WINDOWS PREPARES to INSTALL for 1st TIME THEN A SERIES OF WHITE DOTS APPEAR ONE JUST KEEP GOING for HOURS and does not stop what I need too do

  Hello

  as you say that you use the recovery disk that provided the computer manufacturer, you will need to contact then on this problem

  It's their recovery process not microsofts

• Stuck on "Setup prepares your computer for first use.

  I went through a custom installation of windows 7 upgrade from windows xp and at the end of the installation process, I get the message "Setup is preparing your computer for first use.  my computer has been slain on this screen for hours.  I restarted in safe mode, but it got the same screen.

  Try to repair the Installation of Windows 7
   
  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.
   
   
  If this does not solve it:
   
  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD
   
  Note: there is a space before the /.
   
  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Setup prepares your computer for first use showing on startup

  whenever I start my computer, it shows "Setup prepares your computer for first use. How to get rid of this?

  Press F8 during startup

  Select repair your computer, press Enter wait for it to load
  Click on startup repair
  If that doesn't work take a look

• "Setup is preparing your computer for first use" loop problem

  Hello, I was hoping you guys could help out me with a big problem, I ran across when trying to install Windows 7 on a desktop computer new, custom - build. I managed to successfully install my Windows 7 64-bit, it appeared, but when I try to run it, that I will meet a black screen that says "Setup is preparing your computer for first use" and it will stay there forever, I would say. I let it run all night and didn't go anywhere.

  I tried to start in safe mode, and Windows was loading files sys32, he got to "Classpnp.sys" and it froze. After a few minutes, the screen is blacked out, and I got fired the familiar screen "Setup is preparing your computer for first use.

  I bought the copy of Windows 7 nine FRY, there will be no problem with that. My HD is a (new) 240 GB PNY Optima SSD, my mobo is a (new) Z97X-SLI Gigabyte, and I have 16 GB of RAM. All these things have been recognized by my BIOS, it seems that everything is properly connected.

  I tried to install Windows 7 on a second time and exactly the same thing happened. I also tried to repair the installation to start upward, but he finds no problems. Also a check of the memory and the disk has verified without any problem. The only things I plugged are my monitor, keyboard, and mouse.

  Does anyone know of a workaround for this screen loop "first use"? Any help would be greatly appreciated.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.

  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your hard drive

  Intel® drive SSD Toolbox

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:

  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:

  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  Support PNY: http://www.PNY.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html

  Samsung Magican review:

  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?

  Check their support site for the latest drivers as the CD that came with the computer

  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:

  Download and install the most recent Windows 7 or 8 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos

  or equivalent ATI.

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php

  Watch the clock speed of the CPU under various conditions of loading

  (when using speed step technology Intel EIST).

  #1 Note:

  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory

  and the "SPD" tab shows the nominal speeds for each memory location that is filled.

  #2 Note:

  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.

  voltages, temperatures, fans speed.

  http://www.CPUID.com/HWMonitor.php

  Speccy:

  Advanced for your PC system information tool.

  Need to know what's inside your computer?

  No problem! Speccy will give you all the information you need.

  Note: May or may not show the motherboard manufacturing.

  Overview: https://www.piriform.com/speccy

  Free version: https://www.piriform.com/speccy/download

  Test of Stress of FurMark GPU (graphics card):

  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/

  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:

  Provides information of the car and has an option (tab scan error) to test your drive.

  http://www.hdtune.com/

  CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:

  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.

  It displays your drives model number and compares your drive with other discs of the same brand and model.

  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.

  http://www.almico.com/SpeedFan.php

  GPU - Z:

  A utility light, designed for you give information about your video card and GPU.

  http://www.techpowerup.com/GPUZ/

  PC WIZARD:

  A powerful utility designed especially for detection of hardware, also analyses more.

  He is able to identify a large scale of system components and supports the latest technologies

  and standards.

  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Computer starts with "Setup is preparing your computer for first use" every time.

  I've run msoobe.exe and Setup.exe in C:/Windows/System32/oobe, in Windows 7 Ultimate and now whenever the computer starts up and displays the logo of Windows 7, I get "Setup prepares your computer for first use.  After that get the Windows Welcome screen, it works very well.

  Hello

  Let us try both methods and check if it helps to resolve the issue.

  Method 1.
  Perform a startup repair, check to see if it helps.
  Follow the articles for h ELP on startuo repair.
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2.
  You will need to perform a clean boot to find the service which is the cause and then disable or remove.
  Here are the steps to do:
   
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.

  Once you've found the conflicting service, stop it. Start the computer and stop it.
   
  Stop this service now.
  a. open the control panel in the Start Menu.
  b. Select administrative tools in the control panel.
  c. open the Services in the Administrative Tools window.
  d. Select the service and then click on stop in the left column of the main window of the Services window.

  Reset the computer to start as usual

  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New installation of Windows 7 Ultimate, computer loops and again: "the installation program prepares your computer for first use.

  I'm running Windows 7 Ultimate on my Toshiba Tecra A4-S211 and provided that the installation went, it seemed that took place without incident; except that when I try to start windows I see: "Starting windows" followed by "Setup prepares your computer for first use" that is displayed for about 3-5 seconds and then it restarts and displays abruptly: "cannot start Windows. A recent hardware or software change might be the cause. "I tried the safe mode, but also"last known good configuration"and I get the same results. Finally, I tried the repair function on the installation disc and says am Startup Repair is unable to repair the computer automatically, where then I click to send information to Microsoft to be told that if I had all the devices attached like a camera or portable music player to remove them and restart. I have nothing set, no flash player or anything.
  I tried to do all the steps above a dozen times each, and the results are consistent, except that the start of repair is sometimes said that there is nothing wrong with windows. Here also to point out that I had XP running on it before without problem and I tested the DVD on another computer and it worked.

  Hi Austin,.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  Follow the steps in this link as well.

  http://support.Microsoft.com/kb/2674065#Method2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-failed-to-Starta-recent-hardware-or/8dad59b9-A08D-4cb8-8ddf-1c164b7caf65

• Windows 7 install hangs at "Setup is preparing your computer for first use.

  I'm trying to install Windows 7 Ultimate 32 bit on a Giada N20 via USB.  The specifications of the computer are:

  Intel Atom D252
  NM10 Express Chipset
  2 GB of Ram
  HARD DRIVE 320
  NVIDIA ION graphics processor

  I seem stuck at "Setup is preparing your computer for first use.  It stays on the screen for about 8 minutes, goes to a white screen for about 5 minutes and then returned to the screen "Setup is preparing your computer for first use.  The nettop does not have a CD-ROM drive, and I have currently not an external USB drive is my only option right now. I tried the USB stick on another computer, and he moved very well.  I try to avoid having to buy an external rom just to try it, but I guess that will be my next step.

  Someone at - it suggestions on what I should try next?

  Hello

  Are you able to boor in safe mode?

  It is possible that one of the devices of external hardware or internal interferes with the installation process.

  Try the following steps:
  a. first of all unplug external devices attached to the computer except the mouse and external keyboard.
  b. restart the computer and start the installation of Windows 7.
  c. press SHIFT + F10 to open the command prompt.
  d. type devmgmt.msc in the command prompt and press to enter.
  e. in Device Manager, disable all unnecessary devices and then try to continue the installation.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Help in the preparation of site for google search

  Hello. I don't know if someone can help me or if I need to communicate with google, but I'm trying to understand how to prepare my site for Google Search. Right now my site appears in search results, but not how I would want that there. In the screenshot below, my site is the official site of Hollie Fab. I don't want the 'about' and page 'Contact us' to appear like they are child pages and no parent. Is this all that I can do in Muse about it or is it a google thing?

  

  I know it's probably a google thing, but I would like to than my result of research for display with sitelinks as in the example below. I'm new to the whole google webmaster thing so I don't know if there is a way I can prepare my site in Muse?

  

  Thank you

  Hello

  This will be done by Google, try to use sitelink option in Google Webmaster to downgrade and see if that helps

  https://support.Google.com/webmasters/answer/47334?hl=en

• How do you prepare a PDF for 4 signatures & dates?

  How do you prepare a PDF for 4 signatures & dates?

  Hello

  You can achieve this by using text tags. EchoSign text tags are specially put in text format which can be placed anywhere in the content of your

  document specifying the location, the size, the type of areas such as the signature and first fields, checkboxes, radio buttons and form fields and advanced optional field, processing rules. Text tags can be used also as PDF form field names.

  Text tags are converted to EchoSign form fields when the document is sent to the signature or uploaded to the library of documents EchoSign. Tags text EchoSign can be placed in any document type such as PDF files, Microsoft Word, PowerPoint, Excel and text (.txt, .rtf)

  Please refer to page 5 (date) and 10 (signature) of the document create Adobe forms Echosign with text Tags.The can be found here

  Thank you

  Jat

• Question, InDesign is the 'correct' software to use to prepare a document for the type parameter?

  Forgive my ignorance, but I'm just trying to help my sister. She becomes a published book and asks the editor that she prepare her manuscript for 'type parameter '. His work has been done in all the "Microsoft Word", but I don't think that 'Word' has the ability to do that (whatever it is that she must do so). I don't really understand any of this, but I told her I thought she could be able to achieve this with Design. Could someone please tell me if I'm wrong, or that I am far from base? If I'm right, could you I please give me a tip or two to point us in a direction? I thank very you much. Buffmin

  "Preparing for membership ' not the same thing as fact really the layout. The difference in the world.

  Usually publishers want submit you your manuscript in Word, not software like InDesign.

  Talk to the Publisher and get a clear direction.

  It is very unlikely that InDesign is what you or she wants to use.

• Best practices in preparing a picture for printing or Web site?

  I use Photoshop for more than 15 years, but my knowledge is limited to a few tools I needed: color correction, contrast and density correction, cropping and occasional sharpening. While working with the photo editing software in the newspaper where I work (I don't use Photoshop, just at home), I noticed that its preparing images for printing always achieved results beyond what I've accomplished. I asked him what was his procedure Basic, but for some reason, he did not. I heard once him using channels in the inhancement of the image, which I do not know anything for another photographer. His images also have a freshness which does not resemble the typical photo where the blur has been applied. In other words I don't see this halo effect where a light area meets a dark area.

  Yes, I found tons of tutorials general Photoshop on the Web, but have not found one that guides me through the actual steps to prepare a photo for printing. Same problem with the preparation of photos for use on the Web. Can someone point me in the right direction?

  Something common to improve journal crispy is getting black contrast and sharpness. You can change the black channel of a CMYK image or go to the lab and ramp to the top of sharpness and contrast on the L channel.

  http://www.libraw.org/articles/displaying_L_channel_in_Photoshop.html

  http://photo.NET/learn/digital-photography-workflow/advanced-Photoshop-tutorials/sharpenin g-in-lab-color.

  http://www.Dgrin.com/showthread.php?t=26724

• Prepare the video for Flash

  I have some videos that I prepared to play Flash on a website, but I have mucho problems get Flash to recognize the files that I want to play. I use Final Cut Studio - preparation FCP and compressor to encode. Should I do something bad encoding or prepare the video for Flash. I would use Adobe encoder, but is not compress anywhere near the necessary efficiency, so I'll try to properly prepare their in the compressor.

  Any suggestions/advice?

  you create flv files?  If so, you use the flvplayback component in flash to play the flv file?