Restore the system (win7) after upgrade to Windows 10

Similar Questions

• Satellite A500 - how to restore the factory settings after upgrading to Windows 7?

  Hello

  Since I have updated my OS to Windows 7, I have a few problems. In general, I noticed my laptop would ' t work as well as it was running Vista 32 bit. Especially with games online (souch as counter strike 1.6).

  The problem is that I have for my backup DVD because my DVD burner work not at all :/ Now I just wonder how could I return for win Vista without the DVD. Is it still possible? I also do not have small jets CD I bought my laptop. So, what should I do?

  null

  Hi stab them.

  I think that I n the new good t for you: restore factory settings without Toshiba recovery disc isn t possible in your case! :(

  First of all I think it's normal to s no recovery disk is delivered with the laptop as you will need to create them yourself using the Toshiba recovery disc creator. That is why it s recommended using high quality as Verbatim DVD-R media.

  I think that the only option to recover to factory settings is to order a new Toshiba recovery disc.
  https://backupmedia.Toshiba.EU/landing.aspx

  I put t understand why you didn't create this disk, because after the first boot, if you shut down the computer area, you get the following message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

• The system hangs after upgrade Windows XP to Windows Vista premium,

  I upgraded my windows xp to windows Vista premium edition and it freezes all the time now, want to release until I press the off button and it shuts off and turns back on.

  Hello

  1. the manufacturer of your computer had vista drivers available for you to download and install on your computer to model?

  2 - is your computer meet the minimum requirements of vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

• Cannot access the CDrive folder after upgrade to Windows 8

  * Original title: that I can not access the CDrive on my desk

  My PC has recently been upgraded to windows 8. We use dropbox to store our files and of course to have a copy of these files on the CDrive. When I send an email (using gmail) I can't find the files copied on CDrive and Dropbox when I try to join from there, the message is "this file is 0bytes and must not be attached.

  Hello Rea,

   
  1. did you reformat your hard drive during installation?
  (2) you are able to locate the file directly from the c: drive and check the size of the file?

  (3) when did save the file to the c: drive, it was post upgrade of Windows 8 or before upgrade (was it already existing in the previous operating system)?

  If you do not format the hard drive and put in your Windows 8 operating system level, then the Windows.old folder would be created where all the old operating system files would be stored. I suggest you try the procedure described in the article and see if it helps.

  
  How to recover files from the Windows.old folder
  http://Windows.Microsoft.com/en-us/Windows-8/restore-files-upgrade-Windows-old
  
  Unable to download Dropbox question contact the forum Dropbox files for.
   
  Dropbox forums"Bugs & troubleshooting
  https://forums.dropbox.com/topic.php?id=117401
   
  Hope this information can help, just reply to the State of the question for any other help.

• Get the error message after upgrade to Windows 10: peer certificate has no Secure Connection has an invalid signature.

  Error message trying to connect to Facebook after update to Windows 10: secure connection failed

  An error occurred during a connection to www.facebook.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Hey, if you're an avast user, please disable https scanning software:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10

  Hello

  I upgraded Windows 8.1 to Windows 10 yesterday.

  Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.

  When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"

  On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.

  Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.

  Thank you best regards &,.

  Umesh

  Here are the technical details:

  http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF

  It is HD4400 Intel graphics

  Try the Intel driver update utility:

  https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility

  Download drivers HP pages not available right now.

• Lost access to the "shared folders" after upgrade to Windows 8.1 Overview

  After the upgrade to Windows 8.1 I no longer access my shared folders. The left pane of the file Explorer has a red x for shared folders. I am running VMware Workstation 9.0.2. The host and the guest o/s are 64-bit.

  Have you tried to uninstall/reinstall VMware Tools in the Virtual Machine (s) and/or uninstalling/reinstalling VMware Workstation?

• Features of the printer lost after upgrading to Windows 8

  I use a HP Deskjet 2060 K110 AIO.

  After you have installed Windows 8 Windows 7, the "Pages to print" option (print odd and even pages) and 'HP Real Life Technologies' are missing, even after I installed the driver for http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4157...

  I tried to install the driver on the CD it came with, it won't install.

  This feature is deliberately deleted or did I miss something?

  Hello

  These features make accessible to the general public through the driver supplied with the HP full feature software, by your description I guess you have mistakenly added the In-OS driver included in Windows 8.

  Follow the steps below, which should add a feature to the printer:

  1. download and run the latest version of the full software features below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109371-2&cc=us&DLC=en&LC=en&OS=4158&product=4157336&sw_lang=

  2. once the installation dialog box appears, click CTRL + SHIFT + ESC to open the Task Manager

  3. right click on the process of HP - DQEX5.exe, and then select the location of the open file.

  4. right click on the address bar and select copy address as text.

  5. open the control panel and then go to devices and printers, the HP Deskjet Ink Adv 2060 icon right click and select printer properties.

  6 open the Advanced tab, click new driver.

  7. click on Next, click the disk button, paste the address of the software by clicking CTRL + V and click OK.

  8. finish the wizard, and then click OK to confirm the changes. your pritner driver now understand one of these options:

  

  Kind regards

  Shlomi

• How to re-enable the Vista key after upgrade to Windows 7

  original title: Activattion

  I bought a legal copy of Vista 64 bit and I installed on a computer. I then used Windows 7 64 bit upgrade for upgrading Vista to 7. So now, Vista is not installed on this computer. Since this copy is not installed on any computer that I then installed Vist 32 bits with the same product key, as both versions came in a single package. This computer is dead and no longer in use. So now, either 32-bit or 64-bit version is installed on any computer. So I decided to install the 64-bit version on a virtual machine that is the only thing that it is installed on and I can't seem to activate. I know the State of the installation on a single computer, but I thougth that if uninstall you you can reinstall on another computer. All of these computers are mine and only installed on a Vista machine. They have never been installed on two machines at a time. The installation of Vista, I have currently is in a virtual machine. Is there a way I can get this activated copy?

  If you used to upgrade Vista Windows 7 is the upgrade version, rather than the Full Installer version, so your Vista license is no longer valid, as it is subsumed under the license of Win 7.

• Satellite L550 - square black on the desktop icons after upgrading to Windows 7

  Hi people.

  Don't know if Windows 7 has simplified our PC as Microsoft would have us believe. I spent the last two days trying to understand why my L550 has suddenly square black on my desktop icons.

  What happens after the installation of Microsoft, application of a software patch updates for a HP deskjet 5150 printer. To be honest, I'm more sure when this nuisance hits me.

  Resolution true color (32 bit) upward in color (16 bit) downgrade rid my icons of black squares. Should I therefore settle for a lower resolution when my laptop can do better? Any workaround yet?

  Thank you

  Hey, Mambo,

  What exactly are you installing if you visit the Windows Update page? Maybe you install a different display driver that isn't compatible with the graphics card.
  Check this box!

  Also, make sure that the new display on the site of Toshiba driver is installed.

  Is the software patch for your printer that is compatible with Windows 7?

• Internal webcam are not not in the devices & printers after upgrade to Windows Vista Home Premium.

  Original title: web - cam.

  I have recentlt my oppreating system upgrade to vista Home premium and now my internal webcam is more listed in my list of control panels device. When I try to add the cam, it is not detected.  I use a toshiba 355-s7905 and Im sure somebody another thenme thing, smarter has been through this and found a salution. If Yes please inlighten me.

  THANK YOU TACCAT60

  Hello

  You can download & install the utility software of camera from this link & check if this solves the problem.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=2332136&RPN=PSLD8U&modelFilter=L355-S7905&selCategory=2756709&selFamily=1073768663

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• does not restore the system files after clean install

  When I click on the HARD drive which has my backup file, it says that "windows could not find and backup sets on e:\.» Please selection elsewhere. "When I click on"Refresh"this disc shows up... again.  When I look at the contents of the disc there is a file named: N360_BACKUP, however it will not recognize it, so, not restore it.

  Is there another way to restore my files? I was really counting on this form of backup, and if I can't restore it, I lost all my emails, email addresses, contacts and favorites for the past two years, no to the meniton photos, music, etc.

  I have looked at similar positions here and tried the suggestions in them with no luck.

  Hello Terryjoe,

  Thank you for your message.  The N360_Backup referred to Norton 360.  We will be more than happy to help you to restore your data, please answer a few questions first well.  What version of Norton 360 backup/restore are you using?  Below are the steps for version 2:

  1. go to the folder C:\Program Files\Norton 360\Engine\3.x.x.x, you will find a tool Arestore.exe (3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)

  2. navigate to the folder C:\Program Files\Norton 360\MUI\3.x.x.x\09\01, you will find an Arestore.loc file ((3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)
     
  3. copy Arestore.exe and Arestore.loc to the root directory where you saved the backup created using Norton 360 (the long file aside the N360_BACKUP) and run Arestore.exe.  It will look in the N360_BACKUP folder to your backup set.

  In your case, you must copy Arestore.exe and Arestore.loc to the external hard drive where you have the file N360_BACKUP. Double-click on Arestore.exe, it will work and restore all your saved data.

  If this does not work, go to the next series of steps...

  4. If she fails to find your backup set, you must delete the corrupted catalog file.

  To delete a catalog file corrupted, go to the N360_BACKUP folder.  There should be a folder with a long alphanumeric name, open that folder.  You can see a file named backup.@db.  It is the catalog file.  You must move this file in this directory (put on your desktop for added security).

  5. Once backup.@db has been deleted, go back and try to run Arestore.exe from the root directory.

  Note: This process may take some time.

  http://community.Norton.com/Norton/board/message?board.ID=Norton_360&message.ID=14505

  See you soon

• Keyboard does not type the correct characters after upgrade to Windows 8

  After the upgrade to win 8 from win 7 on my laptop, that some special character keys don't work in the exact way. For example, when I press SHIFT + @-> I get "result and vice versa.

  Also the sign of the backslash works. It gives the character # and hash gives me character £.
  Any help?

  Another possibility is the incompatibility with the constant guard of Comcast program, which is not compatible with Win 8.  I had the same problem (1-0 on the main keyboard keys don't work), but once I uninstalled the constant guard, everything worked again. (Of course, I had to reinstall Norton.)  Thanks to a person of a forum package for the suggestion!

• Cannot use the FN keys after upgrade of Windows 8

  Hello

  I just upgraded to Window8 and find the FN key does not work and I can not change the brightness of the screen or function keys.

  Please notify

  Read another thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=69003

  You must install VAP to win 8