Presario CQ57-229wm

Similar Questions

• Battery Lithium-ion for Compaq Presario CQ57 229WM

  Hello how are you my battery is damaged and have been wanting to replace Hp suport searched without result.

  Compaq Presario CQ57 229WM

  Specifications of the battery. -
  Replacement of Chemistry: Li-ion
  Voltage: 10.8V = 47Wh
  Capacity: 4200mAh
  Color: black

  HP 586007-147 part number

  Cells:?

  equipped with a label indicating:
  REPLACE WITH SPARE HP 593553-001

  Please if you can tell me in case that you cannot conceguir battery here where or how I can do it, because I tried HP support with no results, then tell me what are the necessary specifications that need to know and research the other sides and have found, but with a different number of cells and a different number of capcidad or tension.

  I hope you can help me thanks

  Hello

  It is a 6 cell battery as shown in the following store:

  http://PartSurfer.HP.com/search.aspx?SearchText=LW437UA

  You can order from there or use the 593553-001 part number to buy elsewhere such as eBay or:

  http://www.Amazon.com/593553-001-replacement-Notebook-battery-5200mAh/DP/B004MR6IO4

  Kind regards.

• Compac Presario CQ57-229WM: failure of Compac Presario CQ57-229WM Memory Module

  Compac Presario CQ57-229WM w / Windows 7

  I get the following text "Windows has recovered from an unexpected shutdown. A problem caused Windows to stop working correctly. Windows will notify you if a solution is available. »

  Followed by a crash dump

  Verification of results in the readers:

  Drive hard test Passed

  HDD SMART Passed

  Module memory failed

  1 732 608 bytes of memory tested system OK

  Fault memory test

  Any help would be greatly appreciated.

  One or maybe two sticks of memory failed. If it's not very common to have two fail - it wouldn't be a bad idea to replace both if you can afford it. You could also spend 4 GB of the 2 GB, you have now.

  Crucial is always a reliable source of memory and they have single sticks or a set. Click on 'Show memory more compatible upgrades' under the memory listed to see the simple sticks and sets:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Presario-cq57-229wm

  You can remove a memory stick at a time and run the test to determine if one or both is a failure. Your interview Guide & shows how remove and replace memory:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ57-200-notebook-PC-series/5091489/model/5111956/manuals?lang=en&cc=us

• HP Compaq Presario CQ57-229WM won\ ' t exceed from windows screen

  Hello

  I have my laptop HP Compaq CQ57 229WM brought by my last grandfather last year. The warranty was out. It is my first choice to fix my laptop. When I turn on my laptop it will just keep telling that in the blue square to the center of the screen...

  A problem has been detected and windows has shut down to prevent damage to your computer.

  A process or thread crucial to system operation has unexpectedly left or terminated.

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable memory the BIOS options such as cache or shadowning. If you need to use safe mode to remove or disable components, restart your computer. Press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  STOP: 0x000000F4 (0 x 0000000000000003, 0xFFFFFA8003885830, 0xFFFFFA3003885E10.0xFFFFF80002083350)

  Data collection for the crashdump...

  Initialization of the disk for the crashdump...

  ...........................................................

  Please help me? I need my computer immediately. Thank you

  Hello.

  At has first of all thanks a lot for your help.

  I solved my problem in this way.

  I removed my hard drive to laptop, took all the documents I did not wont to lose and formatted it from another pc.

  I downloaded the first file its ( http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/ )

  and created an installer of the USB bootable Windows 7 on my drive with this tool ( http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html?tag=mncol;1 ) usd

  I have insterted my hard drive and my lap top when I started upward, I boot it form my USB stick and istalled win 7.

  Now it works very well. Just reinstall my programs.

  Thanks for your help once again.

• Someone had the extreme fortune and lucky that I had the upgrade of my Compaq Presario CQ57 229WM

  My system came loaded with Windows 7 home premium, I never satisfied with speed even after maxing out the 8gig memory then I upgraded to windows 8 Professional. The update gave me a new laptop A flawless upgrade even HP support assistant is faster. I was wondering that if HP will give eventually Windows 8 support fot this model, I can assure you that this computer was made for windows 8

  The following link will offer you if HP has tested your system for Windows 8:
  http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

  If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

  If your system is compatible with Windows 8, most of the pilots would be available through Windows 8 and windows update. If you need any specific driver, please follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string like this PCI\VEN_1217 & DEV_7130 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• Upgrade memory Presario CQ57 229WM problem

  White screen after the upgrade with 8gig memory.

  I tried 1 stick of 1 G and 1 stick of 4G and it started, ran mem diag spent.

  Tried two 4 G sticks and I get nothing... no diag screen, no flicker... nothing

  Hello

  Try to install a memory of 4 GB at a time and see if it boots successfully.

  Good luck!

• Restore disc Presario CQ57-229WM has no custom let me make the replacement

  When initially, I created my recovery media I don't check that they have burned properly (not that it would have mattered).

  The second disk looks like partially burned but a jump and will appear empty to my computer the first and 3rd appear very well. I need to recover my comoputer and am unable to recreate my recovery media.

  I got this computer since around in August of 2011 so it's bogged down. I am a student, a programmer of hoddyist and I'm trying to hone my skills of penetration of the network. (I go to school for Information Technology pen. Test will be one of the services I offer)... at least my system is a little messed up despite my skills to bring to the brink several times, I think it's time fo ra save a dreload.

  I need a recovery media that is actually able to recover. Is there a way I can get a second series created or preference, in light of the circumstances created usb aa recovery option. Thank you

  Have you tried to type the F11 key immediately after switching on to see if you can boot into Recovery Manager on the D partition? You can do a reinstall from there too.

  There is an option to order recovery media in your list of drivers-scroll down on the page to see:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5111894

• The fan on a Compaq Presario CQ57 Windows laptop settings

  Hello, I have a Compaq Presario CQ57 and the fan runs all the time at full speed. I opened the laptop and did a fan and cleaning of the motherboard, I applied thermal paste, I changed in the bios the option #Fan always on # Enable to disable, I updated the Bios but still nothing... it sounds like a jet of fighter.should I change my fan? someone who has a Council?

  I already ordered the fan and I will keep you posted as soon as I get it and install it.
  Thank you very much

• Presario cq57: System to disable the code

  I have presario cq57 gives disable me the code 78432038

  Trying to access bios to remove passwords

  Try loader.

  67590018

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Need to "downgrade" my Compaq Presario CQ57 of Windows 8

  A few weeks ago, I upgraded my Presario CQ57 to Windows 8.  Well, I don't like her, and I now have a desktop computer that is anyway a touchscreen that works beautifully.  I thought about my computer limited knowledge that I had created the backup disks to restore my system to Windows 7 Home Premium, but it turns out it's a repair disc.

  Is it possible for me to order the right from HP disk to return my laptop for Windows 7?  I found something on the internet with this post: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/The-Cleanest-Install-Windows-7-Recovery-D...

  I don't know what to do.  Any help would be appreciated!  Thank you!

  Hello:

  Please read the info on the link below to see how to order for your PC recovery disc:

  http://support.HP.com/us-en/document/bph07143

  I believe that my instructions are easy to follow to make your own install of W7 media, if you do more like that.

  You can also make your own regular install of W7 disc and allows to reinstall windows 7 If you can read the product key 25 character microsoft on the COA sticker on the case of the PC. You will have none of the programs supplied with the PC using this method, however.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Compaq Presario CQ57: bios error 501

  What should I do to get rid of this problem?  Please help me someone.

  Welcome to the community of HP @ANAKONDA support,

  Thank you for joining on the HP's Support Forums! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support.

  I wanted to join you and help! I understand that you have a problem with an APPLICATION (501) BIOS ERROR on your Compaq Presario CQ57 laptop PC.

  Remove all USB devices. Disconnect all non-essential devices, because they can cause some problems.

  Try starting your laptop normally after having disconnected all. If that does not solve the problem, please continue with troubleshooting.

  The next step would be for you to try to restore the BIOS. You will see that the document says:

  If the BIOS of your laptop becomes corrupted, and a failure to upgrade the BIOS or damage caused by a virus, the computer can display all the following symptoms:

  • The computer displays the error message from the BIOS APPLICATION ERROR 501.

  After restoring the BIOS see if you can start the computer normally.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Remember to mark this message as an acceptable Solution if it solves the problem for you.

  To show recognition for my efforts please click the Thumbs Up below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Have a wonderful day!

• which processors I've upgraded to I have a compaq presario cq57-339wm windows 7 64 bit

  which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64-bit like faster processor, I have a processor Intel Celeron B800 now.

  This will depend on whether or not your installed version of Windows 7 is Windows 7 Starter.

  The following processors are compatible with the motherboard of your laptop.

  Intel Core i5 - 2430 M 2.40 GHz processor
  (1333 MHz FSB, 3, 0 - MB L3 cache, dual core,
  35 W; not supported on computer models
  equipped with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Core i3 - 2330 M 2.20 GHz processor
  (1333 MHz FSB, 3, 0 - MB L3 cache, dual core,
  35 W; not supported on computer models
  equipped with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Core i3 - 370 M 2.40 GHz processor (1066 -
  MHz FSB, 3, 0 - MB L3 cache, dual core, 35 W;
  not supported on equipped computer models
  with Windows 7 Starter 32-bit
  operating system)
  √
  Intel Pentium P6300 2.26 GHz processor (3.0-
  MB L3 cache, dual core, 35 W)
  √
  Intel Pentium P6200 2.13 GHz processor (3.0-
  MB L3 cache, dual core, 35 W)
  √
  Intel Pentium 2.20 GHz processor (2.0-B960
  MB L2 cache, dual core, TJ85, 35 W; not
  pressed equipped computer models
  Windows 7 Starter 32-bit operating system)

  Intel Pentium 2.10 GHz processor (2.0-B950
  MB L2 cache, dual core, TJ85, 35 W; not
  pressed equipped computer models
  Windows 7 Starter 32-bit operating system)

• Compaq Presario CQ57: compaq Presario cq57 forgotten system password disabled code: 77564960

  Compaq Presario cq57 forgotten system password disabled code: 77564960

  At the password prompt, try 68442366

• which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64 bit

  which processors I've upgraded to I have a compaq presario cq57-319wm windows 7 64-bit like faster processor, I have an AMD C-50 processor now

  The following CPU's option upgrade processors

  AMD® E450 1.65 GHz processor (dual-core, 18 W)

  √
  AMD E350 1.60 GHz processor (dual-core, 18 W)
  √
  AMD E300 1.30 GHz processor (dual-core, 18 W)
  √
  AMD C50 1.00 GHz processor (1, 0 MB L2 cache, dual core, 9 W)

  One of the first three three registered will have a remarkable performance superior to the simple core currently installed C50.

  Coupling of those with a SSD drive for an upgrade and you won't believe it's the same laptop.

• Presario CQ57: Compaq Presario CQ57 system off

  I have a Compaq Presario CQ57

  Locked out of BIOS with message system out of service [51320211]

  Hello

  Enter 44088837

  Kind regards

  DP - K