Present folios of detail for examination in advance

Similar Questions

• Folio in detail with a free subscription

  Hi, I would like to know the correct way to change my application kiosk with a free subscription to a paid Inapp. What happened if I submit a folio of detail with this type of subscription?

  Please help me so that my new application or the inapp is not rejected.

  If there is something I need to know or do it please let me know.

  Thanks in advance.

  You can update your application to change from a free subscription to the retail. When you submit your in-app purchase, Apple invites you to submit a new version of the app at the same time.

  Note that anyone who signed up for your free subscription will continue to get all of the free content, including the content of retail sales. Free membership lasts for always (or something like 35 years, which is never actually in the years of the app). The right to the subscription does not change when you update your app. You might want to consider creating a new application and pointing to it from the existing application.

  -Bob

• Submitted wrong details for vendor Portal account creation request to resubmit.

  Hello Sir,

  I managed to create blackberry id. But by mistake, I submitted wrong details for creating account on the blackberry vandor portal. Please avoid my details and give me the chance to fill in all the details. Currently my account on the portal of the seller is not enabled. It is currently under review. So please avoid the details I have provided and give me the chance to recharge these for account on the portal vandor.

  Here's my Blackberry ID: (REMOVED)

  Please help me soon.

  Thanks in advance

  MOD Edit: Edited post to remove the personal information in accordance with the Community guidelines and the terms and Conditions of use

  This is not a channel of direct support to BlackBerry.

  Contact seller support...

  https://developer.BlackBerry.com/blackberryworld/vendor_support.html

• Difficult to see the details for the traditional DAQ functions

  I'm migrating a Tradtional DAQ to DAQmx applications and manage to LV 8.6 to see 'details' for traditional data acquisition functions.  I looked to the traditional manual online user DAQ & a few other pubs and impossible to find a good explanation, parameters of entry and exit to functions.  Can someone help me?

  Thank you... PacMan

  In talking with Kent Lau, an applications engineer at NOR, told me I was missing the file nidaq.chm for a reason any.  Even after trying it from reinstalling drivers traditional DAQ of Q4, 2008 software distribution, it is still missing.  So, I installed an older version of the driver on a computer that has never had LabVIEW, then copied the file nidaq.chm in the folder 8.6\Help of LabVIEW & was able to then see the traditional DAQ work details.  Thanks Kent!

• Downloads for visual boy advanced does not open and comes up with an error.

  Original title: I downloaded something to advanced Visual boy

  It does not open then I changed what it opens with the visual Boy but it comes up with an error so how can I change this back to normal because when I re-download the file arrives with the visual boy icon in front of a white page how do I change it back to normal

  Hi Jonas,.

  1. What did you download for visual boy advanced?

  2. where did you downloaded the file from? What type of IFF files you download?

  3. what web browser do you use?

  4. What is the exact error message that you receive?

  If you try to set any default program to open the file, then read the article and check if it helps.

  Change default programs using Set Program Access and computer defaults

  If you are facing the issue only with Visual boy advanced, you might contact the support of Visual boy for help.

  Hope the helps of information.

• I have a single folio paid app and I want to migrate to a mult folio app with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi ap

  I have a single folio paid app and I want to migrate to an app of folio to multi with each folio available for purchase. How can I migrate those who bought my application single-folio so that they are able to keep the folio they paid for in the new folio multi application?

  I'm sure that the only way to proceed is to make a free portfolio for all the world in your new application of muli-folio. There is no way to match the records of the purchase of an application with a new application that contains a folio.

  Apple wants to see at least one element of the library is available free of charge, in any case if the application has a utility when downloaded from the store anyway.

  Neil

• Folios of detail does not show in the native Android Viewer

  > when I update the account application adding the secret sharing android I have to re - publish fact sheets to see in the library of Android?

  Do not republish folios.

  Sorry Neil, I have the Android native app ready to publish and activated (with the same id of iOS) in-app purchase of my folio of detail (Yes, it is published).

  On iOS, I see the folio of detail + another free folio, on Android, I see only the free folio.

  The private key is copied to the account id title (and then I have connection in the DPS dashboard with the id of title).

  And the Account of Google Merchant is verified and confirmed this morning.
  

  What do you think?

  Neil! I resolve - now I'll teach you a thing

  If you are not connected with a Google account in the store to play your folio of detail are hiddennnnn!

  *: I drink a lot of wine tonight

• I have 2 blogs on my site, I need to customize the layout of Blog Post details for each diff?

  I have 2 blogs on my site, I need to customize the layout of Blog Post details for each diff?

  Hello

  Unfortunately, it is not possible to have multiple layouts of details for your blog by site, at this point.

  Kind regards

  -Sidney

• Cannot create relationship master detail for datablock

  Hi guys, my form currently has a relationship master detail for 1 datablock and everything works well. I now have a need to do a datablock different, based on the same table as the previous datablock but for some reason any that it won't let me create the same master-detail relationships, as I did on the 1st slice (and I need the same relationships to sort the block shows the same data as the previous datablock).
  
  Anyone know why it won't let me create the relationship?

  I encountered a similar problem before. When you say that you cannot create relationships is - it simply because you cannot select the master/detail through the wizard? If this is the case, you should be able to make the relationship manually, or at least I could when I had the same problem. Although I can't help, but wonder why it wouldn't let you select them in the wizard. There may be an underlying reason for this. But anyway, try and make the relationship manually and let me know if it works.

• HP-M7-J120DX: upgrade details for HP M7-J120DX

  Hello

  I have a j120dx m7 and you want to change the disc.

  Already, I have the disc and it imaged with Acronis Disk clone.

  My question is how do the existing hard disk.

  I had several portable hp and have made several improvements to the player.  The videos that I found in my research are similar to what I'm used to, however, this model is different.

  How to replace HDD.  * Tip, this model does not have the access panel easy upgrade as what I'm used to.

  Thank you in advance.

  BTW, I already visited

  http://support.HP.com/us-en/document/c04094897

  and

  http://support.HP.com/us-en/document/c03229108

  who have easy access standard and replacement Panel and/or details of the model of existing material.

  See you soon,.

  Thommi

  Thanks for all the help.  It turns out that it wasn't the m7-j120dx is a different model.  I was shipped the incorrect model, I returned.

  See you soon,.

  ThommiM

• y at - it a detailed explanation of the advanced options?

  

  I was wondering if there is a document that details the options advanced.  The default values are selected to reject, refuse, drop.  However, if the user is not located and select continue instead to reject, what is the next step in authentication.

  Here are my exact question:

  If you select continue, where GBA seems next?

  Look for the following rule in this access policy or does go to the next access policy?

  Do not have a document but may try to explain in this post

  There are three cases which can apply this configuration and for each case three options control the behavior of

  The behavior of three options is:

  -Reject: send a rejection of demand response

  -Deposit: send no response on demand

  -Continue: continue to assess the conditions of authorization policy

  The three cases for which options can be configured are:

  -Failed authentication: user name were found in ID store but a password is incorrect or the user is disabled

  -Not found user: username was not found in one of the ID stores that have been assessed

  -Process failed: couldn't get a response from the ID store

  As I said, if continue is to select the continuous treatment to evaluate the permission policy for access service that was previously selected. No other service access is evaluated.

  Note that in the authorization policy, there is an additional attribute that can be used to determine the special cases which occurred during authentication. The attribute is "Authentication status" and can take the values of 'AuthenicationPassed', 'AuthenticationFailed', 'ProcessError', 'UnknwonUser '.

  So in the political authorization can define different results depending on the result of the "authentication status"; for example to set default VLAN

• Updated versions app & folios... for Dummies.

  Looing for a quick flow of the process to update the version of your application. Because I'm about to do this process for the first time.

  I already have 2 folios approved and in the iTunes store with my pro account. They are two folios v24 and it's a v24 app.

  I know that if I want to update the v24 to v25 app I need to submitt so for Apple. Should I submit an update or a new application or makes no difference?

  I also need to recreate two folios already released (in the details of the app) and save them as a v25 and submit them as well?  Or folios can stay v24 and the app can be v25 to the next issue when its ready to produce?

  Thank you.

  Is there a reason you want to update your app to v24 to v25? Most publishers don't update their applications with each new version. They wait until there is a convincing feature, such as nested overlays or newsstand. There is nothing wrong with the update of the app and v25 has a new library and a few new features of download. I just wanted to point out that it is not necessary to update your application with each new version.

  You don't need to update your folios v25. With some versions, it is a good idea to upgrade to the latest version to take advantage of the new features the folios, but v25 has only a single function which requires a version v25 (the business function to display the conditional HTML content). The v25 Viewer reads all the previous versions of the Viewer. You will never need to submit again that app buying Apple, even if you do not update the folios. Brand new.

  To update the application, you connect to DPS App Builder, select the existing application and click on modify. (It is sometimes a problem for editing apps to update the version, but these downturns have been developed). Select v25 and then just click through the windows, change settings, where you must. You'll want to use the same mobileprovision files (or later, when they expire, mobileprovision file based on the same AppID) and certificates.

  Download and test the app dev. If it works ok, download the .zip distribution file. Go to iTunes Connect and indicate that you want to add a version of your existing application. Then use the application loader. The steps are in the companion publishing guide.

• Folio Builder Panel for later update...

  I get the message;

  "A more recent version of the Folio Builder is available for download.  Update Folio Builder Panel toward the latest version here. »

  I downloaded all the news updates and re-installed In-Design.

  Can anyone help?

  DPS for InDesign CS6 desktop tools

  Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5377

  Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5376

• A presentation to the email for others to see without a browser

  I'm doing a presentation to email for others to see without a browser, but when I do, it does not show. I downloaded Adobe Flash Player 10.0 r22, I built the XML presentation, I have published, then uploaded to my hosting. I tried everythiing I can think, but it does not always display. It works on my machine; However, when I try to on it is containing the folder, it does not show anything other than the preloader.  Can someone help me please?

  I can send you an example of a job of presenting with a Zip file containing my presentation with everything I built if my explanation is not very clear. Help, please.

  If this is not the right Forum, would you let me know where to post?

  Thank you in advance,

  R.A.

  You did not mention to watch an exe so far.  I'm not opening any executable from source online - no offense intended.  And if you plan to send an executable to anyone ready for some flack and the likelihood that it will be rejected by mail as a viral message servers.

• Master/detail for printing of PDF report

  My application allows end-users a way to fill a transport request via a form, separated by about 10 regions. The application consists of about 50 fields (from the table requests) and n number of transport, penetrated through tabular form in the application form. Once they complete it and send it to the transport Department, I want them to be able to generate a master/detail of the application report , with information of demand on top and all the transport on a table.
  
  The DBA installed Apache FOP and it works fine for printing the report. We are on Apex 3.2, exploiting an Oracle 11g database.
  
  So I followed this guide: http://www.oracle.com/technology/products/database/application_express/howtos/howto_master_detail_pdf.html. I have created a master/detail form, installed Desktop Publisher BI, created the RTF template, everythng. But it is not out of what I want.
  
  When I "print" to PDF, I get only a table with transport, but no info on demand at all, even if I choose "Advanced (include session state information)" and I does not include session state information on all the variables I wanted for the output in the PDF file.
  
  Any idea of what this could be the cause? Session state disappears somehow when I print the PDF? Or is there a better way to solve this problem? Any help is welcome.
  
  Best regards
  Mathieu

  I decided to buy FO Designer of the Java4Less. For $ 60, it's a flight, and it works well. Need to change a thing or not in the XSL - FO generated, but nothing too difficult at the moment.

  Best regards
  Mathieu