Presentation of #MISSING through Smartview
An easy for you. I think that Glenn said to me last night, but I was a little foggy.Suppose you need to erase an entire worksheet data that has been submitted by a user in Essbase.
I assume I want to replace each value with #MISSING and not 0 s.
Make:
1. choose the #NoData / Missing Label: #MISSING in the options of SmartView
2. replace all values with #MISSING on the worksheet
3 submit
4 restructuring to destroy the blocks of #MISSING
Thank you!
WS
You should be able to lock and send a #MI
Tags: Business Intelligence
Similar Questions
-
Unable to connect to Essbase server through smartview - network error
Hello
I installed and configured 11.1.2.3 EMP:
APS - Windows Server
Essbase Server - Linux
I tested the connection between the Regional and Essbase service Console and it works fine,
When I tried to connect via SmartView Essbase I got the following error message:
«Unable to connect to the server of Essbase.» "Error: Essbase Error (1042003): [11001] network error: impossible to retrieve the information of the name of [EssbaseCluster-1].
I will be very happy for suggestions,
Thank you
Yuval
The problem has been resolved.
I discovered that it was with Linux server, I could configure the Essbase server from Windows server to Windows server while it was certainly the problem of Linux.
To solve it, I had to re - install Linux server, I configured the Essbase server and she succeeded. I don't know what was the reason for the issuance of the periphery, but I guess that there is a missing package installed on Linux server and this cause of the wrong configuration.
Yuval
-
What provision I should give the user access to applications through Smartview?
Should what I give to the user to access applications via Smartview Shared Services. ?
Access to the server would do? Or I have to give something else?
Requirement is tht the user should be able to retrieve and send data via Smartview.You need access to the user with access to the server - this will give the user the possibility to connect to the Essbase server in Smart View only. The user sees all the applications listed.
Then implement the user as write on each application that you want to see them and to present data.
Kind regards
Robb Salzmann -
Hello
hope this is the right section. I wasn't able to find this problem.
I ve had problem with the "submit" button. In the process I assemble two documents together, so we're attached to the second. Then I use it as an entry for a user component assigns. Form should have a Submit button, which is already there. But in the workspace, after the allocation and the form, I don't see the button. I can see common button, which gives me after pressing 'Submit cancelled' error msg.
The Submit button settings are common as the rest forms I use and work with. The button does not appear, also, when I do not use ddx component assembly.
I was already in the situation of ´submit missing´, but this time I'm off what mistaken idea.
Thanks for your suggestions.
Lukas
If you have the bridge shape you add to your PDF file, the Send button is hidden in the workspace and the full button will be displayed in the interface of the workspace.
Also you must make sure that the URL to submit the button submit is set to http://
: /workspace-server/submit. What do you get?
Jasmine
-
Is there a way to recover through Smartview exchange rates?
Is there a function Hs will extract HFM in exchange rate?
Thank youYou can use the hsgetvalue function in smartview for rate of return, you must select the correct intersection of the custom 1 and 2 to find the deals because they are stored in the custom dimension, and unless you redefine the rates they would be stored in the [None] entity. Also in the future there is a separated for SmartView message board where this can be posted
JOINT TASK FORCE
-
Connection to multiple servers through smartview
Currently, my users side by comparison of the coast between the HFM application on Production servers and development then. To do this, they create a report in every environment, but I wonder; is there anyway to create a report to connect the two? Each environment has its own APS so I'm a little confused on if this is even possible. Even if I change the name of the connection, it does not. They use the reporting for this function, Ad-Hoc could be used?
System: v11.1.2.1 (if it works with Smart View 11.1.2.3, then I'm ready to upgrade).
That's right, you can recover data from both at the same time. You'd have a column where you pull in your Production data and another column where you pull in your data of development within the same Excel sheet. Again, it is using HsGetValue, not ad hoc reports. Maybe it's different for you, but for me, I'd go under private connections - create a new connection - select my Dev server from the menu drop-down or enter-it's to see a list of all applications on the dev server, select the application that you want to connect to, give it a name and then use that name in your formula (for example HsGetValue ("Dev" etc...). In your other coulumn would connect you to the production in a similar way, but your forumula would be HsGetValue("Prod",etc...).
-
Dear gurus,
I have 2 conditions that should run when the user submits 0 and other should run when the user submits #MISSING.
Now I'm unable to present #MISSING through SmartView to ASO, I tried removing the cell and by submitting and even trying to present #MISSING but it did not help.
I'm something that is not possible?
Thank you
RN
It is not possible to present a #Missing at ASO thanks to Smart View or the typical add-in in a cell containing a value before any (even zero).
This is because these tools create an 'additional '. If you have a value of 100 in the cell and then to submit #Missing, for example, Essbase actually creates an extra cell to a value of-100. When you query you can see the total of the 100 original with differentials - 100, which is 0. You can never go back to a true #Missing. Merging the slices doesn't help either.
-
ScrollBar on the presentation of the workflow element missing
I exported a flow of work of one of our servers of 4.1.1_733 build VCO to a new server build 5.1.1_2942. This particular workflow changes the values stored in a configuration item. When you run the workflow running on the 4.1.1 server, it displays a scroll bar on the right side of the presentation-it missing on the 5.1.1 window server, so you cannot access certain values. Anyone know what might be missing? I don't see a property within the WF to set anything for this. Thank you.
I'll let Burke reproduce this test. As a work around you can add steps / groups in your presentation.
To export a package, that you go in the package tab, click the icon to create a new package, change the package, add your workflow. Save the package, click the icon to export the package and attach it here.
-
SmartView 11.1.1.3 access Oracle Essbase
Hyperion Planning 11.1.1.2 Application created. I have created several forms of data. Able to open fact data through SmartView and data are correct. Interested in connection Essbase to use Ad - Hoc Reporting. I make the connection to Oracle Essbase and forest down to the application databases. I select record application and the POV window appears. I am able to select members to identify the members of my report. When all have been selected, I hit refresh, but no data appears. I use the Admin login to perform these steps. Is there a missing step or the required security settings. On my data form for the record, I am able to see all the data.The first thing I would check would be possibly option "navigate without data. If it is enabled, disable it could make a difference.
See you soon,.
Alp -
Presentation of the multiSite screen
Hi gentlemen,
My setup.
-1 x with active MultiSite C40.
-1 x C20
-1 x Movi
C40 launches a MultiSite opening C20 and Movi. In C40 I got several presentation of the screen but to the Movi and C20, I had available to active speakers (to not)
several layout of the screen). Is this normal or should I get several presentation screen in Movi and C20?
Depends on what "distance in family" has been defined, you can set this to anything you want or by
CLI:
xConfiguration RemoteLayoutFamily video presentation:
or through the web gui:
Advanced--> video--> Layout
/Jens
-
Hello
I am unable to display cell data when I connect to planning through smartview, I'm #Value! error in my spreadsheet
Where any other user with the same level of security is able to get data from the same sheet of my machine, so options and settings all looks good.
I know that if cell formula and not calculated because of another reason, then this error will be displayed for specific cell, but my case I see only #VALUE! not all data.
What could be the cuase of the question?
Kind regards.
1 are you facing the same issue in the forms of planning data as well?
2. check the report of commissioning of the user to whom his work and for one is not
3 are you facing this problem while using shared and private connections?
4. is the problem intermittent?
5. do you have the #NumericZero as well? or its always #value?
-
SmartView Essbase connection on the default port, must connect to 6423
Hi all
We have Hyperion 11.1.2.2.30x installed and configured with full SSL everywhere. With this, we have Essbase successfully listening on 6423 (6423 only, we have disabled 1423) safely and all components (planning, EN, Calcmgr, etc.) are in communication with success too. Thereby when attempting to connect to Essbase via SmartView, we receive an error stating ' unable to communicate to < essbaseservername >:1423. The issue is that SmartView trying to connect on the default port (1423) instead of the safe harbour 6423.
In environmental assessment, we have added a provider using the secure connection (< essbaseservername >: 6423: secure) that we are able to use in environmental assessments, but in SmartView is always looking for 1423. No idea where this becomes SmartView and or how I can get it to connect to 6423? Thanks in advance for any help you are able to provide. In addition, all other connections through SmartView (SSL) are able to connect successfully.
SmartView version 11.1.2.2.310
Hyperion: all versions 11.1.2.2.30x
If SSL is enabled by the EMP for Essbase configurator and the value of setting SSL configuration in the essbase.cfg then when you connect to Essbase in Smart View the safe option should be available for example "EssbaseCluster-1: SURE.
See you soon
John
-
Hyperion Planning and Smartview: build the function Description HS
Hi all
I am currently using Hyperion planning 11.1.2.2, I want to display in excel of the ad-hoc reports description of some members of the dimension through smartview.
To this end, I used the feature to "build the function:
I selected an empty cell and call the feature, a window appears with two parameters:
1-connection: this field is filled in automatically (WSFN |) HP | PC | Planning | Plane1)
2 - members list: I want to wire it manually ex: '#100 account '.
I click on validate: the following message appears: selected connection does not support this new function.select connection.
I would like to know what is meant by connection? What is the syntax of the connection string? could you please give an example?
Thank you
Best regards.
Toufik
Published by: user11081975 on May 12, 2013 12:55Hsdescription is not supported by connection of planning.
You can use it with Essbase connection.
Read http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user/ch17s01s08s15.html
He talks about what are connections shared and private.
Concerning
Celvin
http://www.orahyplabs.com -
Is it possible to use FDM ERPI drill-through via Excel Add-in, V11
Hello
I use FDM ERPI 11.1.2.1 to load data from Oracle eBS GL (11.5) in Hyperion Planning 11.1.2.1.
The drill-through of Hyperion Planning to Oracle eBS GL by FDM ERPI is permitted through Smartview and data forms.
Do you know if it is permitted through the Excel Add-In V11?
Thanks in advance for your help
FannyYou cannot use the add-in classic spreadsheet (Excel) if that's what you are referring.
As indicated in the other post, it works through Smart View.
Thank you
Todd Rebner
-
Hi all
I just want to know is there a limit to download data through smartview.
Currently, we are facing problem "Smartview Timeout error", by loading data using smartview.
Please suggest.
Kind regards
SanjeevThere is a problem of microsoft with wait times. Take a look at this team of smartview blog
http://essbaselabs.blogspot.com/2010/02/smart-view-timeout-settings.html
Maybe you are looking for
-
problems with Windows Media Center, rotation of the photos after burning a DVD
During the preparation of photos, create a slide show using Windows Media Center, all the photos are well aligned. When I burn the DVD, some of the pictures are rotated 90 degrees. I double-check the photos in the file and they are properly aligned.
-
What are all the object in Notepad
Well, I'm new on note pad and I want to know just like .exe file or something like that I know .exe .html .vbs .reg Can you tell me that all of them would be nice to know
-
Windows Vista - my worksheets had icons for word documents or installation of programs icons
When starting my computer, why Office five of the six albums icons for spread sheet documents appear as icons for word documents and the icon for the sixth broadcast sheet paper appears as one of an executable program? My computer is infected?
-
Receives the error "USB device not recognized" but nothing is attached to the laptop
I get "Device not recognized USB" popping up - I have no devices attached to my laptop USB
-
Is MRT (Microsoft Windows Malicious Software Removal Tool) a good scanner