Presentation of the multiSite screen
Hi gentlemen,
My setup.
-1 x with active MultiSite C40.
-1 x C20
-1 x Movi
C40 launches a MultiSite opening C20 and Movi. In C40 I got several presentation of the screen but to the Movi and C20, I had available to active speakers (to not)
several layout of the screen). Is this normal or should I get several presentation screen in Movi and C20?
Depends on what "distance in family" has been defined, you can set this to anything you want or by
CLI:
xConfiguration RemoteLayoutFamily video presentation:
or through the web gui:
Advanced--> video--> Layout
/Jens
Tags: Cisco Support
Similar Questions
-
Presentation of the computer screen
Information on my screen is 90 degrees to the left (in landscape format) rather than portrait format. How can I change back so that I don't have pain in my neck of reading?
Try hitting Ctrl + Alt + arrow KEY.
See you soon. Mick Murphy - Microsoft partner
-
Presentation of the screen double with SX20
I have two recently installed SX20 units which are registered on a VCS. Both units have the following options installed.
NaturalPresenter
MultiSite
PremiumResolution
DualDisplay
What hosting a three-way one of the units (Site A) call displays a full screen remote part on the monitor of the first and the second remote side full screen on the second monitor. That's how I can expect it to appear. However, the second unit (Site B) shows two parts away on the first screen and displays only the presentations for the second screen that otherwise would be empty. I compared all the parameters and believe that they are the same for both units.
To further complicate the issue when B Site hosts a multisite call or device uses the second screen for video. By selecting the options of the touchscreen controller layout did not involve video displayed on both screens.
The following settings are configured under Advanced Configuration. Video.
Monitors: double
LocalLayoutFamily: automatic
RemoteLayoutFamily: automatic
Any ideas?
What Site a using the on-board microcontroller, welcomes all sites, he will receive a video stream separated from each participants, however, it will be transcoded and it will send a composite stream that contains all the sites of the Conference on other sites - so this behavior is correct.
Looks like that Site B has been configured with video output 'Role to monitor' value 'Format' only instead of "Second".
/Jens
-
presentation of the homescreen - naming file has no
Hello
I found a problem in Apple Configurator 2.2 step-by-step
(1) "edit Blueprints" by clicking the button of Blueprints
(2) right click the master plan and choose "Edit-> presentation of the home screen. »
(3) set up a few Apps and a dossier, rename this folder... can be of type "APPLE."
4) click 'apply '.
(5) try again step 2, you will see that the folder name is always the same.
Someone at - he saw the same thing?
iPad 2 Air, iOS 9.3.1 AC2.2
Before Apple fix this problem, I found another way to do this.
Use OS X Server and open the Profile Manager.
Pick up an iPad and enrolled in OS X Server
Create the "Home Screen Layout" parameter by setting in profile.
Download this profile setting and using Apple Configurator 2.2 to install this profile to the Machine.
This work!
-
I want to remove the other icon of the user from the logon screen.
For security reasons, I would delete the other user option from the logon screen. I am running Windows SteadyState 2.5 with the Welcome screen option.
Any help much appreciated.
When you use steadysate, the other user option will be present on the logon screen.
Uninstalling steadystate will solve the problem.
If not, please transfer your question in the Sub forum
http://social.Microsoft.com/forums/en/windowssteadystate/threads
If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Switching applications during the presentation on a separate screen
Hello
No help available here would be much appreciated.
I have the Mac connected to a video projector. Under system preferences / poster I have the 'mirror' screen of the Mac projector.
I have two applications using the screen of the Mac: a spreadsheet (in mode full screen) and a Keynote presentation. I wish I could choose what is shown on the projector - the spreadsheet or Keynote presentation - and * easily * switch between the two.
I'm having difficulties in reaching this goal. When I "play" the Keynote presentation, Keynote seems to get their hands on everything: the projector becomes 'Display format' and the Mac screen display "presenter". If, during the presentation, I need to momentarily display the worksheet on the projector, I leave the presentation of Keynote ("ESC") and to the spreadsheet on the Mac (the spreadsheet now displays on the projector). On the way back, I have to switch applications on the Mac, then press 'Play' on the Keynote presentation (the projector display now the presentation again).
All this is fine except that it is long. It significantly breaks the tempo of the presentation session, the public gets distracted by what I do on the computer, and the emphasis is more.
Ideally I would be able to spend what is shown on the projector (presentation of the worksheet for the presentation) with one or two at most, mouse clicks. I thought that I could do it by changing just the applications on the Mac, but, unfortunately, when the speech is 'Play' there is no way to access the docking station to change application.
Does anyone know of a combination of Options of setting display, number of jobs defined on the Mac, the Keynote presentation options,..., which would allow this switch quick and easy?
Thanks in advance.
Use the application Switcher: the keyboard command is: command tab
-
The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this? I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.
Any suggestions to adjust welcome.
Thank you.
The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.
Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.
-
Presentation of 1310-65 of Cisco on the main screen not full screen
We have a customer with an end point unique screen of 1310-65 CTS of Cisco. We ran a HDMI cable for presentation to the codec to try to present the full content screen. There are about 2-3 inches of no display on the sides and the top. Is it normal? I know that the camera case comes down to about 2 inches in front of the screen and he thought that if the presentation was full screen, part of the presentation would get blocked by housing.
The client wants it to be full screen. We mentioned the use of a secondary screen which we know would solve the problem. Everyone fell on this and perhaps the code light shed on feature requests or future that would solve this problem?
Thank you for your time...
Hi Daniel,.
Yes, this is normal. As you described, the screen is cut to avoid the camera overlooking the presentation. Additional screens are the only option here.
Graham.
-
Hi all
I would use pop ups in my current project, but I would like for the pop-ups to appear as the subject without the corresponding provision of the screen (bar side, summary, index, glossary, etc.). I am generating in Multiscreen_HTML5. When I saw my pages in a browser (CTRL + W), the pop - ups look fine but when I Save/generate, the screen layout, as you would expect, applied to the whole of the project (including the pop-ups). I'm putting the pop-ups on automatic size.
Is there a way to exclude a topic of the presentation of the screen then I could create rubrics for pop-ups.
Thank you
d
Figured it out.
I needed deselect Convert popups AutoSize and custom size to hyperlinks (Multiscreen_HTML5 settings, profiles, Desktop screen, optimization). The pop - ups appear now as I had envisioned (auto size without the presentation of the screen).
-
I have two screens, first_one contains 17 fields & by a button_presnt in the first screen, I'm reaching to the second screen, on the second screen after pop_screen (first) & push_screen (first) I get my first screen, now I want to remove 15 fields, but I face the error, this illegal argument exception, or "Try to delete a field that is not the Manager"... & Note this point I got the get_field_count from the first screen.
Try{
UiApplication.getUiApplication () .popScreen (object_to_supprot);
UiApplication.getUiApplication () .pushScreen (object_to_supprot);
}
catch (Exception err)
{
Dialog.Inform ("page load error:" + err);
}Try
{
Dialog.Inform ("field homepage County:"+ object_to_supprot.getFieldCount () ');int k = object_to_supprot.getFieldCount () - 1;
While (k > 1)
{
Delete (object_to_supprot.getField (k));
k-- ;
}
}
catch (Exception err){
Dialog.Inform ("error in the setting of the key work:" + err);
}
I disagree with Simon here. I think that the deletion of fields of a screen is a valid thing to do. I can see the case when you are using the same screen, but have two different sets of data that require slightly different fields on the screen. This is what seems to be the case here.
I just realized what is the problem.
your code:
Delete (object_to_supprot.getField (k));
must be:
object_to_supprot. Delete (object_to_supprot.getField (k));
Your current code is actually:
This.Delete (object_to_supprot.getField (k));
and 'this' is probably your second screen. You want to remove fields from your first screen.
Can I ask you to review my first post and Simon post, once again. If please review how to use the battery in the display and make sure that you use it properly.
-
ios10 - can not go beyond the lock screen
I'm updating my iPhone 5SE yesterday. It is already planted on the lock screen 3 times requiring a reset, that is to say press power and home for 10 seconds. I've owned iPhones for many years and has never had to use the front reset feature.
My contact ID is active, and most of the time when I press the home button the phone automatically unlocks as usual. However on occasion, when I press the button to unlock the phone at home I am presented with the numeric keypad to enter my access code. The phone does not respond after that, completely frozen until I do a reset.
Try to reset all settings. No data is affected, but all parameters will have to be entered again. These parameters include, passwords for WiFi and footprint digital/Touch ID put in place. You will have to start all over again with the settings, but it's less work than the restoration of the device.
Settings > general > reset > reset all settings.
-
Then my phone 3 days ago started having a screen is unresponsive. I just found someone else who has the same problems as me. My screen is white and gray, flickering vertical lines at the top of my screen, sometimes extending to the bottom of the screen. My iPhone 6 s more screen shows only these lines when I use Siri for what it is, which is a little strange. To make things even more bizarre my screen becomes sensitive occasionally, but only when I'm talking about Siri for an indefinite period. One of the things I had in common with a question that someone asked who had similar problems that me was that, when these lines flickering, vertical, white and gray, the iPhone will eventually type things randomly on its own. Such as random apps or opening of the things randomly without my intervention. A unfortunate thing is that when this happens it selects things like that to end a call or facetime. I already know that the cost is $329 remedy since its considered as "other" in the apple repair options and I am also out of warranty, so I wanted to know if there is any other explanation for this. It made my phone very difficult to use these days now...
Im going to guess that your phone is actually a 6 + and not a s 6 +, which means that your phone is suffering from simple plu epidemic of iPhones of all time - to the epidemic ic touch. It is unrelated to Siri and tricks of the 'home', the lack of contact button that gets worse with time and flashing bars gray is the presentation of the default signature. It's a failure level Council of integrated circuit chips that control touch and it is a design flaw in the jury of 6 + that Apple does not recognize. You can send for microsoldering of the Board of Directors to resolve the underlying anomaly for half of the cost of your options at Apple--assuming that you are not interested in protecting your out of warranty at Apple options.
-
Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?
Try going into settings > general > reset > reset home screen presentation.
-
Power Point presentation on the projector question
Movies do not play on the screen, even though the animations and static slides show perfectly and at the same time
on the screen of the computer laptop and projector.If I switch to "CRT" only, movies play correctly on the projection screen but the image disappears
of the laptop. Y at - it a cure for this? (Never happened with my laptop older!)Hello
I studied diligently in the internet and found some answers.
It seems that Windows with directx is able to show the power point on a single screen presentation.
I think you should check and activate the Overlay settings on this screen.
Then it should work on both; screen and projector. -
KB2296011 causes the blank screen in Windows Vista Home Premium?
I'm troubleshooting an issue with an installation of Windows Vista Home Premium on a laptop. After Tuesday October 12 updates, the laptop goes to a blue screen after authentication with any account. There is a mobile cursor mouse, but nothing else. C/a. gives the menu, but "Start Task Manager" has no effect, restart will only work.
I am able to login normally mode without failure. Remove the update KB2296011 removes the problem, I narrowed down it to only this update. It is now necessary to restart and use system restore to go back before this particular update to access Windows.
I did the following to troubleshoot:
(1) I tried to install the system update tool, which had no effect.
(2) I tried to install the KB2296011 update manually after downloading, the problem returns after installing.
(3) I tried to install the KB2296011 update manually mode without failure by another post here, but this is not possible, which gives the following error: "Windows Update Standalone Installer: Installer encountered an error: 0x8007043c.» This service cannot be started in Mode safe. »
It seems up to present have no way to obtain this update to install without the origin of the white screen issue. Please advice, thank you.
OK, it looks like at this will be my last post.
This technician seems to address the issue much differently from the rest. After the things we have done in my previous post, he seems convinced that the problem occurs when this security update is installed, it thinks it's UAC which is damaged, and possibly other files. If its resolution suggested the problem is to run a repair on Vista installation, in order to repair potentially damaged or corrupted files. This would correspond well with hijackware theory posted earlier, too.
It seems door by another symptom not reported to me or noticed until now. With or without UAC enabled, standard users cannot connect. It passes the connection, in the preparation of your office for a disconnection. Administrative users can connect very well. As the primary user of the machine is an administrator (of course!), this was not noticed until I created a Standard user to test and found this problem.
I hope than a repair installation (or even better, an upgrade, as I prefer to simply wipe the HD and start over) will solve the problem. The machine has 2 GB of RAM and a 2 GHz dual core chip, so I think it can handle very well (my wife does mobile) Win7.
I hope that all of this novel, we have written here will help others as well.
Maybe you are looking for
-
My desktop computer has ceased to send/receive emails after some problems with the software of advertising on Firefox.My laptop is running the same t/bird & Firefox via a wireless router and receives the same accounts of electronic mail without any p
-
Satellite U300 - 14K (PSU30E) - what is the WLAN and other materials?
What is the HW wlan in the machine? Machine pre-installed Vista (32 bit). The data sheet does not specify the HW very well. Device Manager says PRO/wireless 3945ABG Golan [HEIGHTS], but the download wlan driver has no driver for it. Ago realtec drive
-
Yoga 900 wakes up from his sleep when picked up by the short edge
I want to show Aproblematique I had with my 900 Yoga to see if others have had similar problems. I discovered this when I put my Yoga, (who was asleep) in my backpack and then subsequently noticed he was awake. It took me a while to understand what w
-
The doc for the function of the subset of the table shows the extensible function
In LabView 2010 the doc for the function of the subset of the table shows that the function is expandable with indexes and multiple lengths. I can't expand the function for multiple indexes. How can I do this? Is the documentation for the function by
-
What is the cause of resolution color Vista reset 32-bit?
In Windows Vista, I set the color resolution (in Control Panel) in the middle of 16-bit (from the highest 32-bit). I have two photo editing programs that only work with 16-bit resolution. Programs probably date from prior to Windows Vista. However, n