Similar Questions

• Theme 25 - items are not correctly displayed in the presentation of the grid

  Hi all

  APEX 4.2.5.00.08

  Oracle 11g Enterprise Edition

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed. I read a blog and he said to remove all the colspan which will then automatically display elements. I did, but it did not work. The form consists of several parts using a list of tabs on the page. Parts of the tab using the model 'Region without the buttons and titles' of the region. I tried to replace the template "no model", while he was a little better, it has not corrected the problem.

  I've migrated the application and objects in the db at the APEX. ORACLE.COM (it took a few hours) and I hope someone can resolve my problem until the site is upgraded to 5.0.

  Workspace: RGWORK

  Application: KIMBERLY (33925)

  Page: Vehicle details (13)

  Username: TESTER

  Password: test456

  The first screen will be a Update/View vehicles 1 choice menu

  Choose this option and a report with a single line id.

  Select this line and display page 13.

  You have Developer access but please keep me on what has been fixed. I don't want remedy you. I want to know what has been resolved as well.

  Please get back me to me as soon as POSSIBLE because the site is upgraded to 5.0 this Friday.

  Robert

  sect55 wrote:

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed.

  Why you want to switch to theme 25 instead of simply retain the theme that was used in 4.1?

  Go wrote:

  Robert,

  Look at your application. just a simple change.

  change:

  Region: Veh/equip Information

  Presentation of the grid:

  Start the new row: Yes

  That helps, but it's not the whole story, as it appears the layout is still affected by the problem described in the thread previous Theme 25 region without buttons and issuance of securities

  Applying the fix I suggested it (in 78449 application I created a copy to ensure that I was working with the initial problems) Gets the items on the same line, but I guess that's not the same as the original provision and it doesn't look very good.

  Basically, I would say either stick with the original theme or by switching to a 4.2 theme that still use the page layout based on a table (for example, 24 or 26). Theme 25 is difficult to work with and works best with presentations created especially for her from the start.

• What libraries have been presented in the theme of the beauty of the books?

  Original title: beauty of the theme books

  Does anyone know what libraries have been presented on the pictures of the theme?

  Hi Dan,.

  This collection of images contains illustrated from all libraries in the world. When you select a picture library/theme, you get the same information.

  For more information, see the link:

  The theme of the beauty of the books

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Presentation of the dynamic grid for version 4.7

  Hi all

  How can I create a dynamic grid presentation that is supported by version 4.7? I need to load images dynamically and they want to see as soon as they are done loading.

  Im trying to use a VerticalFieldManager and several HorizontalFieldManagers but I get a

  java.lang.IllegalStateException: field added to a Manager, while it is already apparent

  exception: when trying to add pictures to HorizontalFieldManager who is all ready displayed.

  Can someone please.

  D iscutez several times here.

  Refresh a screen with fields update

  Look at these links.

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-refresh-current-screen/m-p/206670#M29...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-refresh-a-screen-with-updated-fields/...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-refresh-the-current-screen/m-p/328505...

  http://supportforums.BlackBerry.com/T5/Java-development/refreshing-repaint-screen-or-FieldManager/m-...

  And the presentation of the grid is for OS 5.0

  4.7, you need to do with the Manager.

  http://www.BlackBerry.com/developers/docs/4.7.0api/NET/rim/device/API/UI/Manager.html

  Hope this helps.

  ------------------------------------------------------------------------------------
  Kudo press to say thank you to the developer.
  Also, press accept it as a button when you got the Solution.

• After loading the driver, Miss me a lot of dll which is present on the drive

  I'm trying to reinstall written in-house (but there is a long time in a distant country by a perhaps mythical programmer) software on a XP system, which is supposed to allow a PCI-6602 to communicate with an SCB-68. Pilots (DAQmx for windows v. 8.5) seem to load fine, but when I run the application, she moaned about missing a whole slew of dll that is not present in c. 8.5. They are present in v. 6.9.3, however. I tried to uninstall 8.5 and install 6.9.3 - and the application always moaned about missing DLLs! Although they are present on the disk, they do not have installed when the DAQMX software installs.

  I can't just copy the files in question since the installation disc, because there are many of them and most, if not all of them exist in 2 or three different versions each: for example, nidaq32.dll.SOME_RANDOM_CODE, nidq32.dll.ANOTHER_RANDOM_CODE.

  I guess I * could * copy, of course, but the number of possible combinations is formidable, and I think that there is a smarter way to understand this.

  Hi Sue,

  nidaq32.dll is associated with the traditional OR-DAQ driver, so I wonder if the program could be written before the introduction of DAQmx.  What version of LabVIEW was written with your program?  In addition, you can check that you need NEITHER-DQA traditional rather than the DAQmx for your program.  If you have your CD of NOR-DAQ, install the traditional driver with all the support.  You can also download the latest version of the driver NOR-DAQ traditional 7.4.4 to ni.com in this place:http://joule.ni.com/nidu/cds/view/p/id/570/lang/en.

  Good luck!

  AnitaB

  Technical sales engineer

  National Instruments

• Downloaded and installed Windows updates. Running to find the modified theme and no clear Vista theme.

  Can someone explain what happened? All the available themes are the current non-transparent theme, called 'Modified Theme' and the classic Windows theme.

  It's really strange and really very boring, simply because I didn't ask for this.
  Everything I have done differently was click on the button that says "downloads and installs updates before Shutting Down", in the usual area where is the sleep button.
  Any help would be much appreciated.

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• The presentation of the HP product continually flashes on my Officejet Pro 8500 Premium a

  I need to know why this constantly on the screen with ads appeared suddenly just a couple of days and how to disable them. The ads are the presentation of the HP product that appears under the icon to discover.  HP has had to update my settings. I certainly did not have it.  He also turned on APPS that I have no use for.

  None of the solutions presented in a book in the previous question.  The only good thing that seems emerged from this update without notice is that the printer seems to turn on in ready mode faster and winding seems faster.

  HP - I still need a solution.  This constant reverse Energy Star savings.

  Thank you.  It turns out that the tour WAS the screen saver!  I do not change this setting.  It has changed itself?

  Once I turned the screensaver off, the Tower disappeared.  Now, it's actually to SAVE the screen with the OFF position.  How backwards is that?

• BlackBerry Smartphones Blackberry will honor my warranty if the account owner is not present in the store?

  I was 18 at the time of the purchase of my phone, so my father-in-law put the phone in his name at the time. Now I have problems with my blackberry, and he's not around more. So I'll need to take it in me, and I have the box, as well as the charger, cd tools user, the small manual books, my virgin mobile and conditions.

  I can't find the reception, but they would be able to look up from my account in order to check that it was purchased less than a year ago? In addition, the debit card used to pay the phone bill is mine and they can check that too if that helps.

  Then, the Blackberry will honor my warranty if the account owner is not present in the store?

  This ^^ above are true and all, I would say take the phone of your store, Virgin and the BlackBerry in hand, tell them what is wrong, etc., and they should simply check your account to see the unit on your account and probably will not plunge even in need of a reception, etc., as the device IS actually saved on YOUR Virgin mobile account right?

  Play dumb, not all volunteers 'too much information', unless specifically asked on a receipt (I doubt you will be). So yes, it's "my father-in-law bought for me as a gift, he's gone now and my BlackBerry does not work. What can you do? »

• Can I remove Logical columns that I will not use in the layer of presentation as the id or foreign key columns?

  Hello

  Can I remove Logical columns at the level of the business layer that I'm not going to use the layer of presentation as the ID or foreign key columns? It will not affect the relations to the business layer?

  Kind regards

  Nestor

  Hi Nestor,.

  It won't unless they are used as keys, columns sort order, the ID column or the likes. But you can leave them in the MDB layer and expose just in the presentation layer - just in case you need it later. It is not use all the resources or generate overhead. More: Developer of the RPD should be used to work with loads of columns

• avoid to perform actions that are in the presentation at the beginning of the workflow layer

  Hi all

  Is it possible to perform NO actions, that are defined on the presentation layer, at the start of a workflow?

  On our supply workflow contains a step where we select the cluster to build the virtual machine. Once all the other objects required has been selected will be calculated automatically.

  This means that in the next drop you now get a list of all the hosts that are members of the selected group. We do the same thing with the networking and all data warehouses that we use for a virtual machine.

  All actions are mainly related to the 'list of preset of elements', "Data Binding" and "Default"

  The problem is that when I start the workflow I have, of course, a lot of error messages in the log file because I did not choose a cluster at this stage. Also it takes a while until the presentation layer will be shown.

  Can I do to avoid actions that are related to the presentation of the workflow? And make them run when I chose a cluster object?

  Thank you very much!

  The best practice is that the first line of your action must be one if (cluster == null) return null;

  This will speed up the presentation a lot.

  Another more complex way is to use a disclosure ognl expression, but they are difficult to maintain and may not give any gain on the action and returns null.

• I'm a language monitor, I use Adobe Presenter to work properly on both, English, Spanish and presentations with the same software?

  I'm a language monitor, I use Adobe Presenter to work properly on both, English, Spanish and presentations with the same software?

  It shouldn't be a problem. Ultimately, presenter doesn't care what language the audio content is in, he will give all the same. The only problem I could see because of problems would be the appearance of the player. There Spanish lables, but they show only on a computer with the operating system in Spanish. If you want the student to view the two Englishmen and a version in Spanish on the same computer, you may have two versions of the language.xml file where you have one that has the help of English labels in the 'fr' section and the other where it has Spanish labels in the section 'fr '. You would then share those files in and out of the folder located at, C:\Users\ {UserName} \AppData\Local\Adobe\Adobe Presenter\Themes, you must publish a presentation in English or Spanish.

• Difference between variable interface user layout and presentation of the add() method UI?

  Hello

  What is the difference between a variable user interface layout and presentation of the add() method UI?

  Presentation of the variable user interface is something like this:

  var windowResource = "palette {  \
      orientation: 'column', \
      alignChildren: ['fill', 'top'],  \
      preferredSize:[300, 130], \
      text: 'ScriptUI Window - palette',  \
      margins:15, \
      \
      bottomGroup: Group{ \
          cd: Checkbox { text:'Checkbox value', value: true }, \
          cancelButton: Button { text: 'Cancel', properties:{name:'cancel'}, size: [120,24], alignment:['right', 'center'] }, \
          applyButton: Button { text: 'Apply', properties:{name:'ok'}, size: [120,24], alignment:['right', 'center'] }, \
      }\
  }";
  
  var win = new Window(windowResource);
  
  win.show();
  

  presentation of the UI Add() method is something like this:

  var w = new Window('dialog', 'Random Number Generator');
  var btn_group = w.add('group'),
      btn_ok = btn_group.add('button', undefined, 'Ok');
  
  w.show();
  

  Thank you!

  Since the Guide Javascript Tools on the specifications of the resource (you're high example on the page):

  You can create one or more UI both elements by using a resource specification. This specially formatted string provides a simple and compact of the creation of an element, including any container element and its constituent elements. The resource-specification string is passed as a parameter to the constructor function Window() or add().

  The general structure of a resource specification is a specification of item type (for example, dialog box).

  followed by a pair of curly braces surrounding one or more property definitions.

  myResource var = 'dialogue {control_specs} ";

  var myDialog is new window (myResource);.

  The controls are defined as properties in windows and other containers. For each control, give the name of the control class, followed by the properties of the control between braces.

  I had trouble getting the resource specifications to work - probably just didn't make the time to understand. A few differences is that some of the properties that they put in the resource specifications in brackets after the element will not work in the other method, if you do it this way. You normally have to make a second line and add this property. I'm not sure of the first method, but the second is the function object, and you can use the structure of the object (object, nextProperty, etc.) or set a variable to represent the object. In most of the scripts that I write, I use variables and give them a name such as:

  myCheckBox var = dlg.inSomeGroup.add ('checkbox', undefined, "text box '");

  myCheckBox.name = "maCaseACocher";

  By doing this, I can create a recursive function that goes through the entire user interface and retrieves the values of the elements and writes this information to an xml file. Including the names allows the script to identify which variable to control / it is in the xml file, so that it can be reassigned to proper control. I have not tried this with the method of specifications for resources, so I don't know if it will work with it.

• How to import files from presenter in the presenter 8

  Hello world:

  I just give a user a new computer and I am trying to transfer all the files in the profile of presenter on the new computer.

  I tried to copy everything in C:\Users\ < username > \AppData\Local\Adobe\Adobe Presenter\Presenters to the new location, but they do not appear in the presenter.

  If I do a new anchor, this one shows up in the AppData directory, but none of the profiles that I copied appear.

  It's not like presenter has 8 function "import."

  I deleted the folder for the test of Presenter, I did, and he always appeared in Adobe Presenter.

  So, my question is "How can I present 8 to read these imported directories?  Is there a directory or hidden file I am missing or a change in the registry settings?

  Saying, 'Upgrade to Presenter 10' is a valid answer, but I was hoping to get around that.

  Any help or assistance would be greatly appreciated.

  OK, just tested between two computers using Presenter 8 and 10, and I was not able to transfer the information of Presenter by placing in the location, as you can see. Curiously, transferring the themes by placing them in the themes folder still works. However, you can still import a presenter by placing (or pushed together, say one per blade) top on a PPT deck on the old computer. Make this presentation PPT the new computer, and then open it. You should see all the presenters in the list of your host associated with this presentation. You may need to enter the function edit to change them, but the should appear. Looks like the images may have to be reapplied, but you can still get most of the information here.

  Totally impossible seems to be a position of strength to hold.

• Presentation of the bulletin, by aligning the columns, paragraph breaks, and lines of text

  Hello

  I've never drawn a newsletter before.

  It's annoying me because I try to be as meticulous as possible with my alignment, but I noticed there are all things that don't align.

  I have a paragraph style, with a space before and after. I have three columns. When I look at a line of text across all columns of three, they are not aligned. May they line up if I had all the text directly and no image wraps, but the envelopes of the image and the beginning of a new paragraph in column 2, throws the alignment in column 3.

  What is the best way to align things with the least possible effort?

  Are there tutorials on good bulletin of the layout-design? Presentation of the grid?

  Thank you

  Stan

  Learn about the starting grids.

  Bob

• data not getting not displayed in the controls present in the tabs

  Hello
  
  I am facing problem in data binding to different controls existing in different tabs of a page of data. I can see the values of the controls on the first tab, but not in the other tabs. And at the same time, I can get the values of the same data if grid is present in the tabs later...
  
  Please guide me...

  To do what you want, set creationPolicy = "all" on the TabNavigator.