Problem with printer HP Deskjet Ink Advantage 3515

Similar Questions

• Ink advantage 3515: printing issues from ink advantage 3515 after a month of no use

  Hello everyone.

  I have problems with the print quality. In the summer, I installed the new HP original cartridges (black and color), a few printed pages and soon, I went to holiday - my printer has not been used or even turned on for about 5 weeks. A few days after my return, I tried to print text. Horizontal stripes appeared. I tried cleaning software (a natural and deep) and the deep one always helped. However, when I tried to print something the next day the problem was back. I tried the update of drivers and clean the print heads and also I cleaned the cartridges with alcohol and a q-tip. Nothing seems to solve the problem completely. While this could be due to a faulty cartridge, I don't think it's possible for the two new cartridges, I bought to be somewhat damaged. I have attached a scan of the printed text - it has been printed in the landscape, vertical blank lines, you see are indeed horizontal.

  If you need further information please request now.

  Hi @Iwina,

  Welcome to the HP Forums!

  I understand that you have found horizontal stripes when printing with your printer HP Deskjet Ink Advantage 3515. I'm happy to discuss this issue for you!

  It is possible that the problem could be that during the time of your vacation, without the printer used. What ink cartridges could have dried a little. It is also possible, they could be defective cartridges. I would like to double-check that the steps outlined in this guide, print quality problems, have been completed. And that no steps have been missed.

  If the guide does not solve your problem, the ink cartridges will still be under warranty and should be replaced. Please contact HPtelephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  For more information on the use of the ink in your printer, please read carefully this document, the use of ink in inkjet printers.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Deskjet Ink Advantage 3515: HP Deskjet Ink Advantage 3515

  This is the second time black color printing does not work. First company supplied cartridge was about 25% of
  ink inside and it ceased to print correctly. After a lot of troubleshooting, the problem has been identified as the cartridge to replace. I replaced a new cartridge HP and would have taken about 10 draws on different dates. Now there are more than 75% of ink in it, but printing does not occur. Other colors print correctly.

  For me, it looks like a manufacturing defect with the printer that needs to be resolved by HP. request to address you emergency on this problem and advice.

  Name: HP Deskjet Ink Advantage 3515

  Serial number: (deleted content)

  Model name: series Deskjet 3510

  Hi @GirishCNair,

  Welcome to the HP Forums!

  I noticed that you have some printing problems with your printer HP Deskjet Ink Advantage 3515. I am pleased to see that for you!

  Please, try the steps in this guide in print quality, print quality problems. If this does not solve your problem. Please contact HPtelephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Deskjet Ink Advantage 1515: Printer HP Deskjet Ink Advantage 1515 cannot print size A4

  Dear HP,

  I just bought printer HP Deskjet Ink Advantage 1515 this morning. After arived in the House, I set up the printer much. and I'm trying to print a photo in photo gloss paper A4 180 gr. I put the picture full size A4. but when I print it, the result makes me disappointed. It cannot print to A4 size. isn't that reach the size of the letter. my picture cut at the end of the book.

  I read the specs of the printer before buy you. It is said that the printer can print A4 size. but they do not mention on a Cup at the end of the book.

  My question is:

  • what I can do about the problem? (I tried the regional and language settings, but it does not work)
  • is this hardware problem or a software problem?
  • Can I get my warranty to be replaced by a new and fixed? How?

  I hope that there is solution. help me with that.

  Thank you

  Hello

  The technical specifications list the print margins, the printer may not exceed the margins you can find listed in the paper handling > print margins:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-1510-all-in-one-printer-series/5285089/model/5285090/document/c03775352/

  As you can see below in the section of handling paper, borderless printing is not supported for the printer:

  http://WWW8.HP.com/emea_middle_east/en/products/printers/product-detail.html?OID=5385210&JumpID=oc_r1002_emea_middle_easten_c-001_r0001#! tab = specifications

  This is not a defect, these are the limits of the printer that you can find listed by its specifications.

  Shlomi

• HP Deskjet Ink Advantage 4645: Cannot install printer HP Deskjet Ink Advantage 4645

  Hello

  I have problems to install the printer HP Deskjet Ink Advantage 4645 in windows XP. They say just that Eid ' t installed correctly printer. But strangely, I could do a scan of this printer.

  That's what I did:

  -Reinstall the driver. I download the driver from the official site of HP

  -Try in the other USB port. I have test the USB port with my flash disk, it works.

  I don't find the printer in printers and faxes in Control Panel.

  I need help with this problem.

  Thank you.

  Hi @Gemini02

  I try what you suggest, but it is still eror. I'm trying to connect to my netbook with windows 7 and it is working 100%. Finally the solution is pure, I install with windows 7 and there work.

  I think it's about driver that is not compatible with windows xp.

  BTW, thanks for your suggestion. I am very grateful

• Support the printer driver Deskjet Ink Advantage 2135

  Hello, I want to ask type of printer Deskjet Ink Advantage 2135 can support for mac osx (10.12.2) sierra

  I just install driver from the Web site and the success

  

  But I can't print

  Thank you and sorry for my English bad

  @faerulsalamun, welcome to the Forums of HP, it's a great place to get help, find answers and advice.
  Thanks for posting your request, I'll be more than happy to help you.

  I understand that you can't print from your all-in-one printer HP DeskJet Ink Advantage 2135.

  Don't worry because I have a few steps that should help you to solve this problem.

  And here's the step by step guide for you the link:download and install the HP printer and drivers software and printing and changing parameters of printing (Mac)

  Let me know how it works.
  I wish you a good day ahead.
  Feel free to ask questions that this forum has some of the best people in the world, available and ready to help.

• HP deskjet ink advantage 5525:2 - sided printing with hp 5525 deskjet ink advantage

  my hp 5525 deskjet ink advantage is supposed to print 2 sides pages automatically but can not get the hang of it, there is no option in the print properties

  Thank you rayyally!

  Here is the direct link for the driver to full functionality, you need to install completely.

  HP Deskjet full feature software and drivers

  You should be able to analyze later. Please let me know the result

• Hp deskjet printer: Hp Deskjet Ink Advantage 2515 printer scanner copier.

  Hi, my printer Hp deskjet 2515 ink advantage does not work on my laptop. my laptop is acer and windows 7 ultimate.

  the printer is not printing and copieying... What would be the problem and what is the solution.

  my laptop says that the tray must be open, but its already open, and if we use the copier it says his blocking and his flashing and there is a! sign like that.

  Thak you very much hope, can you help me

  Hello @renzy ,

  Welcome to the HP Forums!

  I understand that you get a message to open the output tray or a similar message on your Deskjet Ink Advantage 2515. I hope to help you!

  Try to open the exit tray and ink cartridge door.

  Then close the print cartridge door.

  Do a power reset to see if that will solve the problem:

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Make sure that the printer is connected directly to a wall outlet.

  I hope this helps!

  If the problem persists, give us a call directly on your printing with HP options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

   
  

• HP Deskjet Ink Advantage 1515: stop the test page printed for all-in-one printer, HP Deskjet Ink Advantage 1515

  How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?

  Hello JoshSimon ,

  Welcome to the HP Forums.

  I see that you have a problem with the printer printing before you print a test page.

  If you turn off the printer at the end of the day, please do not.  Turn the printer on/off will result in printing a test page.  If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.

  Once a print job is sent to the printer it then wake up and do the task at hand.

  In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  See you soon,.

• HP Deskjet Ink Advantage 4515: print jobs automatically cancel middle of print printer HP Deskjet Ink Advantage of 4515

  Hello

  Recently I bought the HP Deskjet Ink Advantage 4515 e-all-in-one printer and installed this printer wireless, operating system is 64-bit Windows 8, but question current side in print documents.

  When I give print for black & white command it printed perfectly, but when I give a command for printing, paper color as (color photos) it cancels the middle of printing automatically print job and produce the half printed paper.

  Please help me solve this problem.

  Thanks in advance

  Kind regards

  Rahul Thakur

  Hello Rahul,

  Try following these steps instead and check if this may help:
  -Open the HP software clicking on the HP Deskjet 4510 icon in the desktop or the Start Menu, and then click the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Deskjet 4510 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click the HP Deskjet 4510, then select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• DeskJet Ink Advantage 3545: 3545 Deskjet HP errors

  Hi all

  I have two problems with my HP Deskjet Ink Advantage 3545.It is connected via the wireless network.

  One began two months ago. It was a mistake to NOS_Loader_App 0X83C0000A. I found a way around this problem simply disconnect the printer of decision-making, by restarting the computer and turn on the printer again. If the printer was on, the error doesn't happen until the printer is turned on and turn it on again.

  However four days ago there was a power outage in my area. When the power supply has been restored the printer started showing an "error code 0XB3707004, I couldn't"solve"or work around for two days. The printer has been disconnected overnight and today I tried my luck. The result is that the printer is now running.

  Is there a solution to avoid these problems? A reinstall and restore to the default settings solve the problem? And what should I do, if this problem occurs again?

  Thanks in advance for your answers

  Frank91

  Hi @Frank91and welcome to the Forums of HP!

  I'd be happy to help you to answer the question that you should take a preventive measure to protect your printer from the mistakes regarding. First of all, you have the printer connected directly to a wall outlet or is it in a bar protector or surge rating? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  The power supply is usually one of the main causes of many problems that can occur. If the problem persists, I suggest performing a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  If it meets your needs, please consider tagging this post as solved by clicking accepted as Solution below and others can find the answer more effectively.

• SIMATIC PC 677 '19' TOUCH WITH HP Deskjet ink advantage - k109g printer

  Dear Sir.
  I configured the above said also printer HP DESKJET INK ADVANTAGE K109g computer laptop & his work. But I use the same settings for our SIMATIC PC TOUCHSCREEN pc 677 '19' as Panel hmi runtime (containing windows xp have construction 5.0 - operating system) this device & its unable to make simple impressions (not supporting). so please help me sir...

  Thank you & best regards
  Rohan Yelgurty...

  Hi Rohan,

  What you have said, it seems that you have a problem with the XP operating system on the computer cannot print on the printer. HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• during installation of HP DESKJET INK ADVANTAGE 3525 does not recognize original black print cartridge

  Hi all

  during the installation of my new printer HP DESKJET INK ADVANTAGE 3525 I discovered, that the printer does not recognize the new black ink cartridge. The black cartridge, as well as the other colours, is original and it was packaged with the printer.

  Thanks in advance for your help and have a nice day!

  Hello @Hugh_G,

  Welcome to the HP Forums

  I'm sorry to hear that your printer does not recognize the black cartridge, and I am happy to help you solve this problem!

  Are getting you any kind of error message about the cartridge? If this is the case, please follow this ink cartridge problem: "Not compatible ink cartridge" or "Ink cartridge must be replaced" message for HP Deskjet 3520 e-all-in-one and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series document and, hopefully, the printer will recognize the cartridge after these steps.

  Maybe that's not the question if you thinking maybe that black ink is not printing? If this is the case, please try these steps printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series for a possible solution

  I would like to know if these steps help and what happens after trying them and I hope that we can get things working for you!

• 2135 Deskjet ink advantage: how to resume two-sided printing after power failure

  I was doing a face print job two. at halfway, there was failure, now I want to resume my print job where it was left. How to do?

  Hi @kapilguj,

  Welcome to the HP Forums!

  I see you're wondering how to resume printing duplex after a loss of powere, with your printer HP Deskjet Ink Advantage 2135. I'm happy to help you!

  You will have to start the print job because there is no way out of the where you left off with this printer.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that answers your question and have a nice day!

• HP Deskjet Ink Advantage 2060: I can print in Word format, but not in MS Excel

  Hello, I've just joined this forum and I am new on this.

  I just want to ask for help regarding our printer at the school. I had problem printing in MS Excel, I installed the printer and set as a default value, but still is not printing. When I tried to print, it will just say "Document pending to print" then it will disappear. I tried to install again, and then I had a copy of the printer HP Deskjet Ink Advantage 2060 (1 copy), that I now use to print in Word format and it works, but I found the problem when I tried printing in Excel. I tried to select the copy of the printer but it does not display and only the default is illustrated - in the printer list when you print without printer HP DEskjet (1 copy) is displayed. Everything I do now is copy from Excel and paste the word so I could print the document. I also tried reinstalling the printer but still the same. Help, please.

  -Hopefully I explained it clearly. Thank you.

  Hi @totemnPaul,

  Welcome to the HP Forums support and thank you for reaching out! Although you may have to contact your school IT Department, I'd be happy to everything I can to help. From your description, I understand that you have difficulties when you try to print from Excel.

  Please first try printing HP and doctor Scan.  Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

  Please note, as the issue seems to be limited to those of Microsoft, you might consider reaching out to the Microsoft Support.