How to upgrade IOS for Aironet 1252 G

I'm trying to update the IOS for Aironet 1252 G wirless access point, I look at all the instruction and they do not make sense! And there is just no instuctions on how to upgrade the IOS in the WEB BROWSER interface. I just did an install of Windows Server 2008R2 and real simple compared to only raise AP and running, but there still Microsoft and their staff try to keep things simple for people where CISCO makes more complex theings.

Hello

If you try to update the IOS on a Cisco AP upgrade recomeneded uses the cli via a telnet session or console.

**************************************************************************** RECOMMENDED UPGRADE TROUGH CLI: The following are the proper steps to do an IOS upgrade in a CLI/Telnet session (This is the recommended upgrade): 1st: Use a TFTP server in the computer that you are going to use for the upgrades. If you don't have one, get the free TFTP server in the following link: http://tftpd32.jounin.net Note: Make sure that the computer and the APs are in the same subnet. For example and AP in default settings will have IP: 10.0.0.1, so you need to have the computer as IP 10.0.0.2, subnet mask: 255.255.255.0. 2nd: Download the IOS image from the Cisco.com Web site. Note: Do not "unzip" the image. 3rd: Open the TFTP server (make sure that the TAR file's name of the IOS image is shown as in the web site, because sometimes it gets renamed to "Download .tar" and if that happens you need to rename it).  Browse the TAR file and select it, then click ok. 4th: Telnet the unit, go to enable mode and enter the following command: ap#archive download-sw /overwrite /force-reload tftp://IPAddress of_the_tftp_server/name_of_the_IOS_image_you_downloaded In this link, you must specify the extension, as an example: ap#archive download-sw /overwrite /force-reload tftp://10.0.0.2/c1200-k9w7-tar.122-13.JA.tar Note: The IOS image name is case sensitive, and it should be complete.

******************************************************************************


This is the same procedure for any AP in IOS mode, the difference would be the image used for each specifc model.

Tags: Cisco Wireless

Similar Questions

  • How to upgrade CS4 for Nikon D750 Nef Raw images?

    How to upgrade CS4 for Nikon D750 Nef Raw images?

    you need VC 8.7 or better.

    PS cs4, for example, can only be updated to 5.7

    upgrade your suite or use the dng converter.

    DNG converters:

    Win
    Mac

  • How to upgrade win7 for win8 in HP Pavilion g6

    HIII
    I bought the HP Pavilion g6 online shopping site.
    Currently, I have win 7 Home Basic on it and I want to upgrade with windows 8.
    How can I upgrade it...?

    Hello

    Please check this offer to see if your machine can get an upgrade at little cost:

    http://Windows.Microsoft.com/en-AU/Windows/upgrade-offer

    and also use upgrade wizard at level of Windows 8 to check the hardware on your computer, it is ready:

    http://HOWTO.CNET.com/8301-11310_39-57455768-285/check-your-PC-for-Windows-8-readiness-with-Upgrade-Assistant/

    Kind regards.

  • How to upgrade RAM for Satellite Pro 4300 Series

    Hello
    I own toshiba satellite pro 4300. He now has 128 MB of RAM.
    As it becomes very slow, I want to improve it with additional 128 MB.
    The problem is, I'm not an expert in this stuff and don't know how to do it. I have a friend gave me the extra RAM, but as I have lost the user manual, I don't know exactly how to do the upgrade.
    I will be grateful if someone can help me. Please consider me as a "dummy" in the explanation. :-(
    Thanx

    Ognian

    Hello

    As Lucky said already support memory Expansion can be found in the lower corner of your laptop and it is fixed with two screws. I hope you have the module that is compatible with this unit.

    I found the info that Ram module with the PA3005U part number is good.

    Good bye

  • How to upgrade drivers for Satellite Pro A200?

    I installed Windows 7 on my Toshiba Satellite A200 (psfa1a-003002). And want to update all the drivers for it as well, but I can t seem to find new drivers for it online. Is there a place I can go to find them, or was it a disc that came with the computer that had the Toshiba Utilities who handled the updates that I can download.

    I am not the first owner of the computer so no disk came with it.

    I can see is the Australian model laptop so if you need drivers you can download on http://www.mytoshiba.com.au/support/download
    I hope that this old A200 is supported for Win7 there is no old or new drivers. It is supported and you can find the drivers, tools and utilities, or you will not find them.

    In any case, this old piece of equipment works fine with the drivers included in Win7 and after that Win7 updates installation (optional updates).

  • How to upgrade drivers for a video card for windows xp?

    When I tried to play a DVD, I got the msg in a pop up window: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

    An update of the video card is not the solution, read DVDs require return DVD encoder

    software that has digital rights to play a dvd. There is a lot of BS, the software can be had

    However, ATI offers a free DVD decoder, while nvidia has one but requires a fee.

    Media Digital Rights (DRM), is the problem

  • How to upgrade drivers for Vista that worked on XP?

    I was told to contact the manufacturer it device drivers and the drive cannot be located. Is there another way?

    N ° manufacturers of hardware devices nu responsibily unique to provide the required device drivers.

  • CISCO 881 identify exactly how IOS for installation.

    Dear all.

    Please clerify for me:

    1.I have a CISCO881-SEC-K9 cisco router.

    ROM: System Bootstrap, Version 12.4 (22r) YB5, RELEASE SOFTWARE (fc1)

    If I understand it - 12.4 (22r) YB5 - is my latest version of IOS.

    2.i would like to update my IOS and save all the licenses that have already installed.

    Issues related to the:

    1. how exactly how to identify IOS for installation, which release?

    2. how to perform the installation and save installed licenses.
    examples?

    The ServiceGrid community is specifically designed for active software services, and unfortunately we can not answer this question.

    However, you can increase your question in the lan and community Routing switches:

    https://supportforums.Cisco.com/community/6016/LAN-switching-and-routing

    I hope that helps

    Best regards

    Patrick

  • I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8?

    I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8? I need for a medical application that requires ios8 or above.

    Force restart your iPhone.

    Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

    And then tap settings > general > software update

    If this does not help, make sure that your Mac running the latest version of iTunes.

    You can do this by clicking on your top  Apple left of your screen.

    In the drop-down list, click: App Store

    After the opening of the App Store, select updates in the upper part of the menu of the window of the App Store.

  • Since upgrading my version of iOS of Garageband songs have loops that are not in the Mac's Garageband 10 version. Where are these loops iOS for Mac?

    Have Garageband for Mac and iOS (the last two versions as of March 4, 2016). Downloaded all additional content for Mac. Execution of El Capitan 10.11.3) Mac Pro with boot disk upgraded to SSD, upgraded the video card and 24 GB of memory RAM. Running Garageband for iOS on iPad Pro 128 gb and iPhone 9.2 6 +.

    Problem: after the creation of Garageband project on iPad, then save in iCloud, I then try to open the project in Garageband on Mac. The launch, GarageBand on Mac first shows the dialog box indicating:

    "Some additional content is necessary for this project. Do you want to download it now? »

    I then clicked the download, then install several times. After that GarageBand always reports missing cannot find audio files and a plug-in called "FX Remix" not available on your system. ' Are missing Audio file names (which are also looping names): "Dig deep Chord Stabs.caf", 'down with this synth Clav.caf', Topper.caf of Danger Imminent ", 'Mysterious Funk Percussion.caf' and 'striking Synth Stab 01.caf.

    I tried to remove all the other boot disks and the re-setup additional content once again. Same result.

    You can extract the loops of the GarageBand iOS app, if download you it to your Mac, see: the solution by mprenfro

    How to get the new iOS Go makes a loop in your Mac

    Download GarageBand iOS for your Mac in iTunes. In iTunes, Ctrl + click or right-click on the application and select "show in Finder".  Now open the package by ctrl-clicking ~/Music/iTunes/iTunes Media/Mobile Applications/GarageBand 2.1/Payload/MobileGarageBand.app

    and selecting view the contents of the package.

    In the window that opens, find the folder Library.bundle, ctrl-click, select again to show the contents of the package, open "Audio", then AppleLoops:

    ~/Music/iTunes/iTunes Media/Mobile Applications/GarageBand 2.1/Payload/MobileGarageBand.app/Library.bundle/Audio/Apple loops.

  • How to upgrade to iOS 10

    How to upgrade to iOS 10 on Ipod touch?

    Check below link it's simple, you must have 1.2 GB of free space and only iPod touch 6th generation will support.

    Update to iOS 10 - official Apple Support

  • Hey I lost my ios for my macbook how to fix

    Hey I lost my ios for my macbook how to fix or install ios

    You have a Macbook, but you've posted in the forum for desktop - I asked guests to move it on the forum of Macbook.

    Your Macbook does not run iOS - it is for iPhones and iPads. I guess that say you you have damaged your operating system somehow, OSX - is that correct? This Apple help page explains how to reinstall your system:

    On OS X Recovery - Apple Support

  • How to upgrade an original iphone of current IOS?

    I can't understand how to upgrade the IOS of the my sons original iphone. It has an IOS 4.21 and I need to update the IOS to use Whatsapp. Can someone guide me through the process, step by step please?

    iOS 4.2.1 was the last version which could be run on an iPhone 3G. Which is not an original iPhone.

    The first iPhone, iPhone 1 might not be updated past version 3.1.3

    But without knowing exactly which iPhone you talk it is hard to say what it can be updated.

    If it's any iPhone before the 4S, (1, 3 G, 3Gs, 4) then it cannot be updated to the latest version of iOS.

  • How to upgrade my Firmware for printers?

    Hello

    I'll post a quick tutorial on how to upgrade the firmware for your printer.

    Whatever printer you have to do most of your print, there are a few things you can do to ensure that it runs optimally. According to the model and printer ship date, you can have a few updates to make as your printers may not have shipped with the driver or the most recent firmware.

    There are many reasons why these updates are important. Driver updates will make your printer run more smooth and faster from your computer or the printing station. They will also update Media preloaded into the pilot that they become available on the market, so that you can easily print on these materials.

    Firmware updates also make sure that your printer works more fluid and faster, but this applies to the material itself. Firmware is only the software that is loaded in your hardware. Latest firmware updates for some models of printers decreased paper and ink waste and increased print speeds.

    Now to download the latest version of the software that you will need:

    1. Go to HP.com support & drivers
    2. Click on the green box
    3. Type the product number of the printer that you have
    4. Select what OS you have on the desktop / laptop
    5. After that, you can go ahead and get the latest version of the software that are available on the list.

    Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
    I really appreciate it!

    Once you install the firmware, it will give you a list of instructions on how to load the update to the printer.

    Let me know if you have any questions.

    Thank you!

    I hope it's useful!

    Thank you!

  • iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?

    iOS 8.4.1. A newer version of the iPad (9.2) is available, but he says that this version of iTunes (12.2.2) is the current version. How to upgrade my iOS iPad 9.2?

    iOS and iTunes are two completely different things. It could be that your computer is not capable of running the version of iTunes need iOS en 9. Have you tried simply OTA update?

    https://www.Apple.com/support/ios9/

Maybe you are looking for

  • In the Express VI range

    Hi all Need your advice. I enclose my test vi. For such a situation, when the numbers keep changing, how can I make sure that the tone is always enabled. I used in the range, but this does not guarantee the beep. Is there a better way?

  • McAfee: How can I reinstall McAfee. He cam on my laptop.

    How can I reinstall McAfee.  He cam on my laptop.

  • IPSEC & PAT

    Hello I have a small request... I have 2 sites on which I have the same LAN network 192.168.0.0/24, who needs to talk to each other through IPSEC. I have a pix of cisco at one end & devices other than cisco vpn to another... Server - noncisco - users

  • not able to get editfield on bitmap?

    Hi all I want the editfield be placed on the bitmap.i'll have a wallpaper on which I draw the roundedrectangle. I want the editfield cursor to place on it. I add the editfield with custommanager. but do not get the cursor. public class CustomLoginMan

  • How to fix my windows media player 12

    I was with the windows media player 12 to broadcast my media from my pc to my xbox 360 I have installed a codec pack to get mainly mkv and other formats of media for playback support It worked fine for a long time. recently the windows media player 1