Pressing on the Table hangs the façade in a certain State

Similar Questions

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• Save the façade in PDF or JPG format

  Hello

  Someone out there who have no idea how to do this?

  I want to save the appearance of the front of my VI as JPG or PDF, or BNP, do not use PrtSc ctrl

  I know that I can use call node to save a chart as a BMP file, but I can do the same thing with the look of the façade

  Below is the cover I want to make a picture, automaicly by pressing a button in Labview without leaving the program.

  smercurio_fc wrote:

  I'm not sure I understand. You use the Front Panel method: Get Image? That returns image data, and you can wire that directly to the functions of three graphics (BMP, JPG or PNG). With respect to the PDF, you must have installed a PDF printer driver. Search the Forum, as has been requested before many times, and various programs have been suggested.

  

  Just to...

• Do you know how to create the façade as a backdrop

  Do you know how to create the façade as the Web, I mean like we did the word and click on it will be rather another process by clicking on the button.

  If possible, I can click on the link in the table... No idea no matter who

  In my view, that the user questioned a hyperlink control. See, for example: http://forums.ni.com/t5/LabVIEW/NI-Example-Finder-Like/m-p/1023011#M455994

  You could probably do this in an XControl.

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I can't select or copy text on Firefox for Android 26.0.1 (device: Samsung Galaxy Note 2) OS: Android 4.3. Long press on the text does not work. )

  Can't select or copy text on Firefox for Android 26.0.1.
  Device: Samsung Galaxy 2 Note.
  OS: Android 4.3.
  Long press on the text does not work.

  I would ask someone to check that...

  I'm glad to hear that your problem has been resolved by using the beta version.

  If you have not already the case, please mark this thread as solved by the solution of marking.
  
  This will help other users experience similar problems helps to find faster and more efficiently.

  I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

• I left several tabs that Firefox sent the warning prompt. As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs?

  This may sound silly, but once when I was about to leave Firefox, I got the warning prompt if I wanted to close many tabs... As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs? I'm under 3.6.6 with OS X Snow Leopard.

  You can reset the preferences to warn on the topic: config page via the context menu.
  browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

  In Firefox 3, you don't get the dialog "Save and exit" pop - up if you choose Firefox > Preferences > General > startup: "When Firefox starts": "show my windows and tabs from last time '.
  Get the dialog "Save and exit" pop - up, to select one of the other options (display my home page, display a blank page).

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• programmatically set the colour of the façade

  Hello

  Is there a way by which I can set the colour of the façade. I want to do it programmatically in a large number of subvi.

  Kind regards

  Pavitra

  Just in case where you struggle to find.

  

  This code gives me a dirty blue color on the front panel...

• Is there a way to put the façade of a VI incorporated into the façade of another person, including an object tab?

  I have a stack of sub - vi each of them brings a similar content.  I want to be able to visualize and control the sub - vi through the VI main/call.  Is there a way such that wrap in the tabs of the main vi?  If I change the sub - vi will be proliferated in main vi?  How to make this work?

  You can use a panel of sup object to incorporate the façade of an another VI in your vi.

  Theres a small example for you get started.

  https://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/loading_panel_in_subpanel/

• Get the position of the control in the window of the façade

  Hello

  I have the window façade divided with dispatchers on several components. On a glass, I have a button (and an overlay window) I want to move programmatically at run time. I would like to get the position of the button according to the coordinate system of façade, but to my knowledge, no such property exists. I know that I can calculate the position if I calculate the position of each knife (or component) that is between the origin of the façade and the button, but it takes a lot of time if you have many such cases.

  Any ideas are appreciated.

  Andrej

  Try this

• How do I move the control of hypertrend OR the façade of Labview

  Hello world

  Please, I would like to know if the control hypertrend OR the palette of the DSC can be move in the whole of the façade and how.

  Once I put this control on the front panel, it just stays where I put and not allow me to move it.

  I'd appreciate any suggestion on this.

  Thank you.

  Left click in the top left of this > hold down and drag a box around it. It selects, and you can drag. It works for me.

• NEED HELP FAST - façade freezes when I run my program. I have all the events to the interaction of the façade. I don't have a chance to launch an event that I can't even click on anything whatsoever on the front panel?

  All,

  I'm pragmatic disabling most of the façade with a particular event. This freeze happened when I launched this event and then stopped the program in the middle of the event. While the program has been frozen at all times no matter how many times I turned on my computer and turned off and restarted labview. I tried with pragmatism, allowing some of these objects on the front façade of the loop of events without result. What else could it be? When I select the program stops at the structure of the event and is waiting for him. When I have a finite number of thread for the time terminal timeout the timeout event runs and then waits for the structure of the event and I'm still not allowed to do anything.

  Aaron

  Yenkip,

  OK, the moral of the story when programmatically disabling an object to front panel make sure you have the code that allows very early in the program, changing constantly in the middle of the program changes its active status. I tried enabling some of these objects, but not all. When I tried allowing each of them, I realized that everything in the deactivation of the tab control tab control disables not only the ability to change the tab control. IT WASN'T THE STRUCTURE OF THE EVENT. The guys help OR on the phone told me that the structure of the event was obviously the question. I'm fine now.

  Thank you

  Aaron

• The call of the façade of a sub.vi

  Is it possible to call the façade of a sub.vi so that as soon as the sub.vi starts executing, its façade is displayed?

  So, I found my own way to call the façade by accident.

  Right-click on the icon of the sub.vi on the block diagram

  Click the Subvi node installation

  Check the box that says "see the front when it is called.

  (and also the box saying close later while initially closed if you wish)

• Move the controls the façade of a VI. How do you get a reference to a whole "grouped" controls?

  Fundamental problem (boring, if not disastrous - but common - at least for me):

  When you try to two sktick different screws together and you copy the block diagram from one to the other, it sticks all the controls in the middle of nowhere.  Then, you will need to spend about 10 minutes by dragging controls to the screen from one end of the diagram to another - sometimes more than 15 screens.  Surely, there must be a better way?

  * Either by the way, you might think that labview would have this kind of parameters in the 'properties' of the control in the right click menu - but not joy.

  I guess the obvious thing is that you can write a VI that will get a reference to a particular control, then say together, that is the position (x, y) to zero.  The only thing is that generally, there will be a selection of controls, and often they will be organized nicely - after bring them to zero that you don't want to rearrange their new.  I tried grouping, controls, but then the problem is - how to get a reference to a group of controls.  If you move one of them it does not keep the spatial arrangement.  At this point, I lost - and easily spent more time that should fix this problem.

  Any thoughts?

  If I understand you correctly, when you copy the block diagram of the second VI in the first, the controls of the second end of VI place far-field on the left on the front panel of the first, correct?  I think that these added controls will maintain their relative positions between them so you should be able to find them all as a group in the left field. Then it's all just a matter of how to get them enmasse to the rest of the controls on the front panel. There are some easy ways to do this. There is a button on the toolbar at the top of the front window that allows objects to resupply/group/dissociate the façade. You can select all the orders/lights out in left field and ' ' together them. (As an alternative, you can also drop them all on a tab control that will serve as a container for them). Then you select this group and with selected scroll back on to the existing façade and search and select (shift) ALSO a control/indicator to group existing too. Then with the TWO existing of the selected control and the new group (or a tab with the new group control) selected using the ALIGN buttons to quickly bring a corner of the new group in the alignment of the old control. At this point, you can unlink the news and move it where it should be.