Pressure DAQmx issues statement

Similar Questions

• I want to know when we issue statement truncate table in oracle.

  I want to know when we issue statement truncate table in oracle. No newspaper will be write in the redo log. But we can recover data using flashback or SNA. I want to know where the actually truncate table statement log is stored in the oracle database. Please explain to me in detail step by step.

  >
  I understand your SNA. But I want to know where the truncate statement stored log. But in the redo log, no entry for truncate.but I want to go which connect there is no market value back...
  >
  If you are still wondering after getting the answer so you don't "understand".

  You have received the reply above. Archive of flashback stores data.

  See the link provided above to CREATE an ARCHIVE of FLASHBACK in the doc of SQL language
  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/statements_5010.htm
  >
  TABLESPACE clause

  Specify the table space where the data archived for this flashback data archive referring to be stored. You can specify that a tablespace with this clause. However, you can then add tablespaces to archive flashback with a statement ALTER FLASHBACK ARCHIVE database.
  >
  The data is moved to storage of archives and restored from there when you query for archive flashback.

• Windows start menu flashing, no pen pressure, closed issues.

  All of a sudden my cell phone starts with these symptoms:

  Currently open window flashes.  As... the title up there bar and the outside edge of the Flash. Sometimes the scroll bar will pop back up to the top when it flashes.

  Cannot browse folders in the Start Menu. If I go to all programs and you try to open a folder, the Start Menu closes.

  The laptop is closed. He's going through the motions, the screen goes black, but it is still on. :/ Seeing to power lights and it is still running and warm.

  What I might be able to live with, but the worst problem is that programs like Photoshop detect randomly and then lose the stylus for my Wacom tablet pressure every few seconds or more.  They will detect the movement and button relies on the pen, but not the pressure.

  Do not get any error messages.

  The only thing I've tried so far is uninstalling the Wacom driver and put it back. No change. Don't know what else to do. :/

  Hi Talyafera,

  Thanks for posting your question.

  Try to analysis of viruses and Trojans using your antivirus software.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Also, try to put the computer in clean boot mode and check the behavior of the computer.
  http://support.Microsoft.com/kb/929135

  You can try running a SFC Scan:
  1. click on the start menu, choose all programs, then Accessories, and then right-click on the item to the command prompt and select run as administrator.
  2. click on continue to allow to open a prompt with administrative privileges.
  3. run this command in the cmd prompt: sfc/scannow
  4. the cmd prompt should list text stating "start system analysis. This process will take time. »
  5. wait for the scan to complete (this may take several minutes, so be patient).  This command will scan all protected system files and attempt to replace the incorrect versions by appropriate Microsoft versions
  6. once the analysis is complete, the SFC tool will indicate whether or not it found no problems and whether or not he was able to correct
  7. If any errors are reported that SFC could not resolve, there are steps in this knowledge base article which explain how to locate and attempt to correct the errors.
  8. after fixing errors that are found, check the resolution.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Style in mobile application issues statement (does not work)

  Hello

  In a simple mobile Flex application, I have a simple view with a styleName assigned to a VGroup it contains. The decleration is in the same point of view (for the sake of trying to make this work, but it is in an external css, if I find a way to make it work).

  The padding, I assign just does NOT at all. Nothing. While if I specify in the VGroup directly is paddingTop or another style, it works very well

  Weird behavior.

  Here's the view:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:View ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark" title = "HomeView" >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Style >

  {.myGroup}

  paddingTop:200;

  paddingLeft:300;

  paddingRight:30;

  }

  < / fx:Style >

  < s:VGroup styleName = "MyGroup" >

  < s:Label text = "Hello" / >

  < / s:VGroup >

  < / s:View >

  Anyone has any idea why?

  I use Flex 4.6/AIR 3.6 for the moment, he tried with Flex 3.4 4.9.1/AIR too, same behavior.

  Is this a bug? I'm doing something wrong? Y at - it a hack/trick to make this work that specify the styles directly in the MXML?

  Thank you.

  Just realized that the padding in the VGroup aren't styles more but is properties. Damn these spark components

  I guess that's why, and I think it's a disappointment. I know that I could hack this, but condemned me!

• Contact access cascading pressure...

  I want access to touch pressure in cascades of blackberry. Is there an API for that?

  Thank you...

  If you press harder, the patch of your finger with the screen contact is growing. Some devices to measure and interpret the size of this touch area under "pressure". The problem is that the angle of the finger usually changes as you slide it on the screen, change the shape and the size of the touch too.

  The native SDK has a structure called mtouch_event that contains the width & height of the touch. You might be able to reconcile the region, assuming a circular touch fixed shape. It also contains a member of pressure, but the State of docs that it is not implemented. Not sure if there is something similar in the Cascades, or if you can access data raw native mtouch_event.

• Wacom Intuos 5 / Photoshop CC issues

  Everyone knows these issues?

  -Photoshop CC "exceeded work."

  -Dynamic shape, brush the customization does not properly

  • New selected brush - parameters are strange, wide spacing, broadcast on default
  • Dynamic form does not not in the settings, only responds by clicking on button "always the operating pressure of size."
  • Gum does not not on the pen

  CC update, update drivers Wacom, restarted Coomputers.

  Any advice on what measures can I take to solve this problem? Photoshop CS6 worked fine (on my computer), but CC is just a nightmare with the Wacom brush settings.

  Any help would be appreciated!

  Try this:

  Create a text file in a text editor (Notepad works).

  Type the following lines:

  # Use WinTab

  UseSystemStylus 0

  Save the text file named PSUserConfig.txt and save it in this location: C\Users\ [username] \AppData\Roaming\Adobe\Adobe Photoshop 2014\Adobe Photoshop CC 214 Settings\ CC

  He helped me with pressure sensitivity issues. Let me know how it worked for you.

• The MIG 229771 in c# software error

  Hello

  I use an NI USB-6009 data acquisition.

  I'm unable to create a task using c#, I get a MIG 229771 software error when I try to instantiate with 'myTask1 task = new Task();' or 'task myTask1 = DaqSystem.Local.LoadTask ("D00");' but not when I create a reference ' Task myTask1;

  I get no error when I run the projects in the sample or when I use measurement and Automation Explorer.

  I have added the following references to my project both have a runtime version v2.0.50727:

  1. "C:\Program NIUninstaller Instruments\MeasurementStudioVS2008\DotNET\Assemblies\Current\NationalInstruments.DAQmx.dll" version 9.2.35.32
  
  
  2. "C:\Program NIUninstaller Instruments\MeasurementStudioVS2008\DotNET\Assemblies\Current\NationalInstruments.Common.dll" version 8.9.35.302

  These references appear to be the same as those used in the examples of projects that I can tell.

  As in the projects in the sample, I added the NationalInstruments.DAQmx using statements.

  I've updated my software to version "NIDAQ921f0".

  I use Visual Studio Professional 2010 and I am targeting .NET 3.5 framework.

  I use Windows7 professional 32-bit with admitting privileges.

  I don't have LabView or Measurement Studio.

  I have read the messages for the error message and taken the following steps:

  1. I have repaired/reinstalled the software.
  
  
  2. I confirmed that the services mentioned in the messages are running.

  My .NET framework helpfiles located via the start menu are missing and I have not used c# to control the DAQ before so I could miss something basic.

  Any suggestion would be appreciated.

  Thank you.

  Hi George,.

  Thank you to detail the steps that you have already done, when you say that the examples work fine what they call the start task DAQmx in the same way you are attempting your project? Also you mention that you use a Measurement Studio still your references in the project come from a MeasurementStudio path?

  The only other reason for such an error that I could find was in regard to security issues, you launch McAfee or software NOD32 anti-virus, could you try the program with this disabled in order to see if some material of third party is at the origin of the conflicts with the start method of task?

  Kind regards

• Incorrect, test the results of the e/s digital PCI-6024E in MAX

  Hi all

  I have a problem with PCI-6024E. It is for the Commission alone OR installed on a target computer. First he just used OR-traditional DAQ (7.1, if I'm not mistaken) and it worked fine. Some time ago I installed NOR-DAQmx 8.7.1 on the same computer because it is necessary to run both programs written with NOR-DAQmx and NOR-traditional DAQ. As I know there is no harm to do both OR-DAQ and NOR-DAQmx on the same computer if they are not used at the same time. You can see the traditional under NOR-DAQmx devices and peripheral branches DAQ PCI-6024E jury in MAX. When I run the self-test, self-calibration or Reset Device, Max there is no problem. But Test panels (under the direction of NOR-DAQmx) has a rather strange behavior. When I press the "Start" button in tab e/s digital Test panels window with all the digital lines in input, the 4 first green indicators are on and the other 4 are not. And then nothing happens or I press the 'Stop' button or not. I have the same card as a virtual in my MAX on a development computer, and there is a different behavior of it (I don't have traditional DAQ here, just the same version DAQmx). During the entire procedure of test until I press the button 'Stop', the port State 8 lines constantly evolves so the Green indicators are switched on and off with different ways through all possible combinations of logic '1' and '0' in each line of the port.

  The problem is really obvious when trying to control the statements of some laboratory equipment using their passage through PCI-6024E. digital controls. In this case I get auto turn on/off devices connected to the first 4 lines (which are always lit for some reason any as stated that the Green indicators).

  What should I do? This means the Agency is malfunctioning or there is some conflict of data acquisition and acquisition of data-mx? I would try reinstalling DAQ - mx, but I don't think it's a way out of the situation. I work under Windows XP SP2.

  I appreciate all help.

  Igor-

  Your digital outputs will remain in their last State configured unless the device is reset, in which case they will go to the default value (high, in this case).  So if the last State of the low output of your digital program, as long as you do not call the Device.vi DAQmx reset or shut down the computer, they will remain weak.

  If you have other questions about this application in LabVIEW, it would be better to create a new post on the forum so that we can keep these two separate issues (States of I/O digital by default against digital programming in LabVIEW).  If you are looking for a starting point, you can open the Finder example in LabVIEW ('Help' to find examples).  "" Once the example Finder opens, click on input and output material"DAQmx ' digital generation ' write Dig Chan.vi.  This will help you start.

  Better luck with your request and have a great day!

• How can I disable the caller i.d.?

  I downloaded iOS 10 and I can not find how to disable caller ID

  Discussion of the beta to the public forum software is prohibited. You would need to report to the website issues statement provided during registration to the beta beta. However, not all carriers allow you to disable Caller ID, and if yours is one of them, then you won't find something to turn off the power of the ILA.

• How to define logical tristate using NOR-DAQ 6212 in c#

  Hello world

  I am very new to NOR & help each of you experts out there.

  As the subject says, I'm trying to set digital output at tristate DAQmx & c# channel. I found the link on the Tristate property, but I don't know how to use it. http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/bd33b0d/

  Any help would be much appreciated!

  Thank you.

  Hi kasrus,

  You set the property using the following syntax (after creating your task):

  digitalWriteTask.DOChannels.All.Tristate = true;

  As help document states: "you must commit the task for this setting to take effect."  The help document also highlights when the value of property compared to a reading or writing.

  This refers to the status of task template DAQmx:

  State of task model

  http://zone.NI.com/reference/en-XX/help/370466AC-01/mxcncpts/taskstatemodel/

  Methods of configuration will move your task through this model of the State, but you can also control using the syntax in the article below:

  Check, committing, start and stop of NOR-DAQmx tasks programmatically

  http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/verifycommitstartstopdaqtask/

  Kind regards

  Kyle S.

  Technical sales engineer

  National Instruments

  http://www.NI.com/support

• seeing not table

  Hello

  I am developing a machine to work using LabView 2011. Basically, it's a gas cycling machine. I feel the outlet pressure and the State of the valve cycle. But I have a problem at the beginning, I'm the initialization of an array of 10 elements with '1' in each of the elements. After that, the table goes to a producer/consumer code. The problem I have is that I put a flag on the Board before the loop, and when I run the VI indicator shows an empty array and grayed out (as if the flag was never used), I also put a probe to the wire and there, it is shown in the table. Also, if I connect the indicator inside the loop, the indicator shows the table. So why the indicator just after the creation of the table does not appear? In the image below, there is a part of the code, table 1 does not shows nothing in the indicator, while table 2 shows.

   

  Thank you.

  
  

• How can I the absolute poker to UN block

  Absolut poker is block I can't play. so, how can I in there

  Absolute Poker was arrested for fraud.

  FBI closes Internet on PokerStars, Full Tilt Poker and Absolute Poker sites:
  http://www.rgtonline.com/article/AGA-Chief-issues-statement-marking-Black-Friday-anniversary-106639?CategoryName=business

  Popular poker sites such as PokerStars, Full Tilt Poker and Absolute Poker, have been charged with illegal online games:
  http://Mashable.com/2012/04/13/online-poker-Black-Friday/

• error code 0 x 802600016

  Defender starts ok but will turn off by itself.  I thought that this could be a problem to update.  I asked for updates and got this error code.

  error code 0 x 802600016

  Tutorial Microsoft Support on this issue States:
  Error message
  When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

• When I click on my Windows Live Mail

  When I click to open Windows Live Mail I get a messge: albun photo editing - and a slider to half way through (showing 1 photos 2 have removed). It doesn't answer what either now. I can't get rid of the notice. It will not finish loading and does not allow me to do SOMETHING. Whenever I try to open my email, I get this message and can't open any email or get rid of the notification.  What should I do?

  Stan

  New Thread Description:

  My Windows Live Essentials is stuck in a mode of loading. This I cannot do something. I can't open or use my email somehow. Please notify. Maria replied but couldn't do what it suggests.

  Stan

  Hello

  Thanks for the reply with the issuing State.

  In this case, it would be better to reinstall Windows Live Essentials and check if it helps.

  Step 1: See the following article to uninstall Windows Live Essentials.

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  Step 2: Download and install Windows Live Essentials from the following link.

  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials

  Please reply with the status of the issue so that we can better help you.

• AllDAY using javax.microedition.pim.Event events calendar

  Hi all

  I try to save an event all day in the database using javax.microedition.pim.Event of PIM data. According to the Docs, I add an event that has a start time of 00:00:00:000 (defined by DateTimeUtilities.zeroCalendarTime) and a set of end for the next time, once again, the 00:00:00:000 value.

  The event shows correctly in the application calendar of BB, but it is not recognized as an Allday event.

  It is: that I need TO use the BlackBerryEvent interface to get the calendar to acknowledge an event like allday or I can do this with just using the event interface?

  Another issue: State of the Docs for the event interface:

  ------------------------------

  RIM implementation notes

  The value stored in the field of the END can be modified slightly when it is committed. The field is stored with a granularity of one minute compared to the STARTING field.

  ------------------------------

  Alteration is transparent to the user of the API? When I check the END field after you have selected and hired, it shows no alteration.

  Kind regards

  Carsten

  PS: Need to add that I use 4.5 JDE and the 8820 4.5 Simulator

  You must use BlackBerryEvent to specify a appointent all day.

  DerCarstenUK wrote:

  Hi all

  Another issue: State of the Docs for the event interface:

  ------------------------------

  RIM implementation notes

  The value stored in the field of the END can be modified slightly when it is committed. The field is stored with a granularity of one minute compared to the STARTING field.

  ------------------------------

  Alteration is transparent to the user of the API? When I check the END field after you have selected and hired, it shows no alteration.