Prestaties langzaam system traag opstarten wearing

Similar Questions

• many prestaties langzaam system

  Mijn videokaart moet beter werken voor bepaaldespelltjes

  Hoe kan ik die zo opdaten

  Hello

  This forum is English only.

  Please select your language from the drop-down menu, at the top of this page to post your question in the language of your choice.

  If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• Until I installed the version 3.6.6 on my XP System I would wear Outlook Express to send a link by e-mail. Now, select 'send the link' open MS Outlook Office which is not my default email.

  Before install 3.6.6 on my system XP MS, when I click on the FILE and SEND the LINK to the place to recover my OUTLOOK EXPRESS e-mail system, I have OFFICE OUTLOOK that is on my computer, but I never used it for that. I can't find a setting to change this so far. Thank you. C.F. Boykin-

  This has happened

  Each time Firefox opened

  == I installed the Firefox 3.6.6 now

  See this support article:
  http://support.Mozilla.com/en-us/KB/changing+the+e-mail+program+used+by+...

• The recovery disks 2 wear all of the operating system?

  I have an old HP Pavilion a1220in PC running Windows XP Media Center Edition. I also found a set of recovery disks in the box.

  I've had a lot of problems with my OS now, for most trolling, hanging, etc. So, I ran a few Cache cleaning applications and cleaned. Tried to use Antivirus, but it gets even slower PC, so I left this option. Once he went continuously bootloops, which was the first time I used the recovery disc. There were two options, the only thing that I can remember in their subject is one killed all the data and the other is not.

  Once, the score (who wore the recovery image) has been altered and the same problem of bootloop took place again once, so this time I could not choose recover the PC. The only option he gave me was that destroyed all the data.

  Now, I want to change the operating system for some versions of Linux. But before that, I want to know that where I want to go back to Windows, will these DVDs help me? I mean, they will be able to install all of the operating system for me?

  The recovery disks two HP should re - install the operating system Microsoft Windows XP Media Center Edition 2005 full, all the drivers and all included software factory.

  Please click the White Star of KUDOS to show your appreciation

• Recommended installation for the stability of the regions hot & warm even under Safari until Mac, cooling system is innovated. For a more Durable Mac

  Hello. It is best to combine a stable software (10.11.6 is stable to this day) and a cool hardware, even with Safari (with many tabs). A stable software is not enough, a cooled optimal equipment is also essential; It creates a stable holistic system.

  Until Apple, miniaturize perhaps, a sort of refrigeration in the circuits themselves (coolant will be not compact) due to the warming of the planet (some countries reaching a strong history of 46 to 65 degrees Celsius), cooling fan is not viable because it is so hot that he uses room air, regardless of how fast the fans spin (which would be just like a set of dry hair to the maximum) is not enough. An already hot air will get even hotter once Macs is used for long hours that could damage the GPU in particular, or perhaps even deform boards disconnect some circuits even or deform inside fleas which includes also circuits in them. Heat can also soften the welds in the Mac.

  It is recommended to run fans manually with a fan control application, even if the Mac is new (over the past six years the iMac I have had 2 replacements of GPU - this is most probably because of the heat and lack of ventilation in the Macs.) Apple may have more emphasis on function and either looks-it can't be 50-50. Replacement could cost if not for Apple Care which is good to have), if you are in an area that is warm or hot, at least 2000 rpm which seems to be a good balance between cooling and too much noise (it keeps the GPU minus 70 Celsius, especially). At 2000 rpm, the wear on the fans is not the only striking, it's usually only 47% of the maximum rpm of Apple fans (good fans are usually evaluated during maximum 5 years running 24/7 all year). But the best is to turn off all the gadgets to make noise to make the quiet place and adjust the fans (with a minimum of 2000 RPM) as quickly as possible without being noisy for the user. It is better to add extra cooling in the back (like a small electric fan or fans of cooling for laptops) for maximum stability if you're not in a cold air-conditioned room.

  It is good to reset PRAM then MSC after the fans and password recovery to use disk utility (two types of repair) manually before booting into your main operating system.

  God bless you. Revelation 21:4

  Directly from the plug of the iMac:

  Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)

  If you try to work beyond these limits, good luck!

  There's this thing called 'air conditioners' cool the environment.

• WIN8.1 system Toshiba MQ02ABF050H SSHD: LCC Load Cycle Count value increases too fast!

  Hello world
  A few months ago, I bought an Acer Aspire E5-573-3009 New Notebook i3-5005. It comes with the SSHD (= hybrid system) 500 GB Toshiba MQ02ABF050H. I installed 8 GB of RAM on the laptop, everything works perfectly. However, I use CrystalDiscInfo to definitely keep me updated on the disk temperature and S.M.A.R.T. data, and about once a month, I conduct a test with HDDScan. Now, I am really worried about the number of Cycle charge/discharge, or to be more precise: the charge by hour cycles. For example, today, I see that the number of cycles of loading and unloading for the aforementioned disc is already 68007; the number of hours under tension is 1346. This means that the average number of Cycles of load per hour is 50.5. I read a lot on the subject of the Cycles of loading and unloading on the internet, and it seems that 50 charge Cycles / hour is much too high! I have no find any info by Toshiba on the maximum number of charge Cycles their hard disks are supposed to survive, but for many Western Digital disks, it is 300 000. (And my Toshiba SSHD is my Windows system drive, so we can expect to suffer wear more HD average, many of which are used for the storage of date). If the maximum number of charge cycles my SSHD is supposed to survive looked like value, this would mean that almost 1/4 of its overall life expectancy had already left - after only a few months (with 1346 hours power)! I already stopped using Hibernate Windows a week ago (now with the help of sleep or stop instead, but much decreased the value of charge by hour Cycles.) I contacted Acer (which are responsible for taking care in this case, because they sold me the SSHD under their laptop), and they told me that they cannot help me at all, because Toshiba gave no information about this kind of problem or firmware updated. I now plan to change advanced power of the disc in CrystalDiskInfo management values. It offers a slider ranging from 'Min power' to 'Performance '. originally, the cursor was in the Middle, I think I would be similar 'Performance', but I don't know how, and he will help me with my problem at all. Any ideas?
  Thanks in advance for any help!

  Person not?

  Posted by hschuck
  

  Hello world
  
  A few months ago, I bought an Acer Aspire E5-573-3009 New Notebook i3-5005. It comes with the SSHD (= hybrid system) 500 GB Toshiba MQ02ABF050H. I installed 8 GB of RAM on the laptop, everything works perfectly. However, I use CrystalDiscInfo to definitely keep me updated on the disk temperature and S.M.A.R.T. data, and about once a month, I conduct a test with HDDScan. Now, I am really worried about the number of Cycle charge/discharge, or to be more precise: the charge by hour cycles. For example, today, I see that the number of cycles of loading and unloading for the aforementioned disc is already 68007; the number of hours under tension is 1346. This means that the average number of Cycles of load per hour is 50.5. I read a lot on the subject of the Cycles of loading and unloading on the internet, and it seems that 50 charge Cycles / hour is much too high! I have no find any info by Toshiba on the maximum number of charge Cycles their hard disks are supposed to survive, but for many Western Digital disks, it is 300 000. (And my Toshiba SSHD is my Windows system drive, so we can expect to suffer wear more HD average, many of which are used for the storage of date). If the maximum number of charge cycles my SSHD is supposed to survive looked like value, this would mean that almost 1/4 of its overall life expectancy had already left - after only a few months (with 1346 hours power)! I already stopped using Hibernate Windows a week ago (now with the help of sleep or stop instead, but much decreased the value of charge by hour Cycles.) I contacted Acer (which are responsible for taking care in this case, because they sold me the SSHD under their laptop), and they told me that they cannot help me at all, because Toshiba gave no information about this kind of problem or firmware updated. I now plan to change advanced power of the disc in CrystalDiskInfo management values. It offers a slider ranging from 'Min power' to 'Performance '. originally, the cursor was in the Middle, I think I would be similar 'Performance', but I don't know how, and he will help me with my problem at all. Any ideas?
  Thanks in advance for any help!

• Satellite C660-223 - system caution: "" problem with cooling detected system "".

  When I carry my Satellite C660-223 somewhere for example wear at home to College in a protective case in my backpack, I sometimes get a window warning flashing upward every 20 seconds or so said system + "warning: a problem with the cooling system has been detected." Please turn the computer off immediately and return it for service. +

  This only happens when I transported somewhere and as a first step, that these warnings system flashed only sometimes upwards after I hauled somewhere, but in the last two years, he started to get pretty much whenever I took the laptop somehwere. When the system warnings blink until the computer doesn't feel a little warmer than normal. no danger of overheating, immediately.

  I didn't fix it because the problem seems to resolve itself the next time that I carried the computer somewhere. It's a very strange problem where the short-term solution was the same as the cause: as in I would take the laptop somewhere, the warning system flash upwards and I learned that take "for a walk" would fix somehow everything which was the 'problem '. I solved the problem in this way too often so he could be a coincidence.

  So for a while it wasn't really a problem because I just didn't take the laptop anywhere. But the warning system has recently start flashing to the top if I wear just the laptop on the floor, and the warning system does not disappear with my method incredibly non-tech-savvy to "go for a walk", which I am sure many here would give something to laugh :).

  The obvious answer is that I need to get the service pronto thing, but I'm in the middle of final exams and the situation of tech in my house means I can't leave the laptop away for service for who knows how long when I really need to study.

  Responses, I'm hoping to get are ideas as to what actually caused this problem and short-term solutions that are a little better informed that my approach "going for a walk".

  I think THAT what is, is that the movement to carry your laptop around in a backpack something within the done cooling system moving out of place causing the evil TI work. I say this because, while writing this thread I was turn the laptop over and over again to get a look at the stickers on the back and the practice that seems to have "solved" the problem of warning system because this window flashes up while he was only a few minutes ago.

  It seems so that all component moved his place before been moved back again by the movement to turn the laptop over and over. And I was not even take him for a walk!

  Any help? Thanks in advance.

  Hello

  This notification may appear for different reasons.
  The alert might appear due to
  (1) cooling system malfunction
  (2) blocked cooling vents or fans
  (3) software question (VAP - added value package or BIOS)

  Malfunction of the cooling system, you should contact the service agents at the difficulty.

  In case of a blocked vent and fans it s enough to clean the parts using a jet of compressed air.
  This allows to get rid of dust inside the cooling module.

  If the vents are not blocked and you still see this message, check the application of the service station for updates on your computer. If any are found, download and install.
  You can try to uninstall or update the Toshiba value added Package. This package contains a few essential tools and utilities that control the cooling system too.
  Also check BIOS update.

  But if you continue to receive this error, your laptop may require repair

• Pavilion dv7-6c47cl Entertainm: what system heatsink should I buy for my laptop?

  My fan noise becomes stronger and the region feeling too hot. Cleaning it does not help. This has been an on and off problem but what makes sometimes much more noise, I decided I'd better replace it.

  I studied the information but I need more explanation so I can buy the right part. I don't know what subsystem has my laptop.

  I checked the HP parts Finder, but they don't even list for my laptop.

  I would also like to know where to buy the part or parts as HP does not wear.

  Product - 2CE20211RC

  [personal information]

  System Specs: http://h10032.www1.hp.com/ctg/Manual/c03099448

  I ran CPU - Zs scanner:

  Intel Core: i7 2670QM

  Intel HD Graphics 3000

  Core memory: 648 MHz and 2108 MB size

  These are the choices listed in the manual from HP:

  Heat sink (includes the thermal material replacement):

  For use only with the computer models equipped with an Intel processor and a graphics card
  
  discrete memory subsystem with 2048 MB
  
  666391 001

  For use only with the computer models equipped with an Intel processor and a graphics card
  
  subsystem with 1024 MB memory discreet
  
  666390 001

  For use only with the computer models equipped with an Intel processor and a graphics card
  
  UMA memory subsystem
  
  666392 001

  Thank you for your help.

  Hello
  
  Arctic silver is good.
  
  See cela or other similar to dv7 6 c 00 model of YouTube: https://youtu.be/zwxQwLfqQxc
  
  25 ' leave.
  
  Concerning
  
  Visruth

• recovery of wear of battery

  incredible, it works. my 500 Yoga wear 5% after only 2 months of Lenovo store. It's 45000mWh to 42840mWh within 2 months new. I do google all day. and voila, 1 click of the gauge of the energy system reset, extend the battery to 43970mWh. It takes just over 2 hours to reset. can't believe my eyes. means the loss of capacity by 3% only for 2 months.

  Thank God I do, also set conservative mode, which limited the charge to 60%.

  Try this with my 15 month old but Asus does not work.

  so great however

  both pis, contained ten Win Conservation mode and then it automatically limits the charge to 60% on Linux

• How can I delay and keep the system running?

  Hi all

  I have two functions in the order shown:

  DoTest1();

  Delay (6.0);    6 seconds behind.

  DoTest2();

  After DoTest1() function, my intention is to delay 6 seconds before DoTest2() function. However, Delay (6.0) also stops test system to generate 1 second timer pulses to UUT and prevents WEAR it to work. I realized that when I replaced "Delay (6.0) with the function"MessagePopUp"and I tell the operator to wait for 6.0 seconds, it works (or test passes).»

  My question is "is there a function that would delay for a certain time before you perform a specific task, but still not to hinder other activities take place?

  Your help would be appreciated.

  Thank you.

  Robert Mensah

  Hello, Stanley.

  I thank very you much for your immediate response. Your code worked beautifully. Thanks again.

  Robert Mensah

• Is - this Windows CE 6.0 supports wear leveling in filesystem for NAND flash?

  Hello

  I'm for Windows CE 6.0 application development environment and using NAND flash memory to manage files. I know that Win CE 6.0 supports defective blocks, file system checking, but I know it does support for wear leveling too for file management?

  Answer you will be highly appreciated!

  Thank you!

  Hi Navin,

  I suggest you post your query in the MSDN forums for assistance on this issue.

  https://social.msdn.Microsoft.com/forums/en-us/home

  Thank you.

• Monitor and system used "wake up" mode ensures

  I tell my story so that others may not feel as if they were alone in their perdicament. My story starts like this:

  I bought the m9520f and and w2408h last Saturday and have been enjoying the PC immensely. I really like HP and wouldn't not consider purchasing another manufacturer - even with the troubles, I'm going to wear. Everything worked well until Sunday night, when I put the system into "sleep" mode and returns an hour later. I had put the system into "sleep" before but was returned to him several minutes later. But this time after leaving the PC in "sleep" for an hour, the system will not turn back. The lights on the PC itself would come on (from the green 'sleep' to the 'blue'), but the monitor would refuse to wake up. I called support and even they could not understand it. We have tried to unplug the pc and all its ropes, but nothing worked. I hooked up the monitor to my other pc, and it worked well, so I knew there was nothing wrong with the monitor. Earlier Saturday the PC would not recognize Monitor driver then maybe had something to do with it. Hmmm. When I disconect the PC monitor would come and it lights on the keyboard would be as well. When I plugged the monitor of the PC turns on but keyboard lights wouldn't. Strange. The monitor would immediately switch to "standby" mode as soon as I plugged the HDMI or VGA - in fact just before he would monitor OSD would be inidcate that niether the HDMI or VGA were connected (which they were physically). So I knew that the monitor was not to recognize the conection. Communication between the monitor and the PC must have been the cause. After about 45 times to turn on and off Alternatively the monitor and the PC, the monitor has FINALLY acknowledged that there was a link and my PC on - WHEWWW. I was afraid that I would have to discuss with the people at Circuit City for an Exchange. I still don't know what happened, but all I know is that I will NEVER put this monitor or PC in sleep in the future. Here are the symptoms that I lived in case someone else there is in the same perdicament. It seems to me that this can be cured with a software update - but I'm not smart enough to Koe for sure:

  Tip #1: The PC would not recognize Monitor driver

  Tip #2: This happened after leaving the monitor and the PC in 'sleep' for more than 30 minutes

  Tip #3: The PC lights (clear blue power, stable, flashing green light on the back and the dvd player opens) but the rest of the monitor to sleep

  Tip #4: The monitor refuses to acknowledge that it is "connected".

  CUE #5: The PC "blockages" accordingly and refuses to switch (kind of caught between being on and "sleepy")

  Tip #6: When the PC finally trun on the driver and the software supplied with the monitor that he would not recognize Saturday had risen from PC (hmm - I chose to not reinstall)

  My recommendation: do NOT try to install the driver provided with your monitor and DO NOT put your system into "sleep" for more than 15 minutes.

  My system: Pavilion Elite m9520f with monitor w2408h 24 inches.

  LAST UPDATED:

  After several weeks with the computer, I found the solution. I did through trial an error. First of all, let me say that I don't have the option of returning the PC to the retailer, because it was Circuit City and they had to stop their activities - so I couldn't do that. Here is the solution for those of you are having problems with your PC do not 'wake up' sleep: (Please note that some documents below may be repetative and you could read what follows before in my previous updates - I just wat to summarize below for some people)

  1) to update drivers (ALL)

  (2) update the BIOS (very Important!) on the site of HP

  (3) HP has a problem with USB devices (external drives, USB mouse, anything with USB and Yes, that includes your monitor). Which MAY have something to do with the "bus controller" driver who refuses to this day to be installed on the 'updates '. I was not able to install this darn update, so I gave up. I know that many of you have had trouble with that as well so I'll leave for another topic on the forum of "solve". All I have now is that I've resigned myself to the fact that it will never be installed and I'm fine with it. Anyway, my main concern was the problem of "sleep". Getting back to what I was saying, the HP has a problem with the USB devices. In other words, all USB DEVICES MUST BE REMOVED before you go into sleep - if you do not, then the system will NOT "wake up". What I've learned, is to remove all USB devices before entering the sleep and my system will go to sleep and wake up without problems - for me, it was just a matter of having disconnected and reconnected once the system was awake. Of course, those with a USB mouse, I recommend that you get a mouse not USB. Fortunately also my HP w2408h monitor is connected through a HDMI cable so I don't have the problem of having to disconnect and reconnect it. The manual of the suggested w2408h connect it by HDMI AND USB but only connect it via HDMI and it works perfectly for me - DO NOT CONNECT THE USB cable on the screen because then you will have the problem of sleep.

  Resolved solution!

  (now, if I can get my gosh darn controller BUS to install and my blu - ray to panic game then that would be nice - arghhhhhhh!)

  Hope my experience helped the people there!

  Message edited by m9520fUSER on 02/12/2009 20:35

• backup system required a disk... How to use a CD?

  G ' Day, I run XP SP3 and Office 2007. When you run a full backup of the system, I wonder to insert a floppy disk. I have not seen a floppy because Noah wear shorts. How can I change the system to request a CD-ROM. sincerely, Bob

  I don't think it's possible. The program you are using is very old, when all THE PCs have the floppy drives.

  Instead of using the built-in XP Backup program to perform a full backup of the system, do you a favor and use a better program like Acronis True Image or Paragon Backup System.

• I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

  If you can still boot your old disk, you can use a program such as one of them:

  KeyFinder: <> http://www.magicaljellybean.com/ >
  Belarc Advisor: <> http://www.belarc.com/free_download.html >

  to read the key out of your old system.

  Also note that if you have a system OEM and the OEM installation disks, the key can be incorporated in the installation discs and can not be necessary when your reinstalling Windows.

  HTH,
  JW

• XP Home erg traag na use fotosoftware

  Portable van een kennis is erg traag geworden na use Albelli Photo Book Creator.
  Said has ze echter al heel vaak used zonder problems, naked red easy alleen al het Windows Splash Screen between 3 EN 5 minuten.

  IK heb laptop first VDD Hiren s Bootcd openen in een o.a. nagekeken "'Rootkit.Unclassified/USBHubB ' service."
  Deze schijnt echter altijd anyway you worden door wat place versie van SuperAntiSpyware.
  Wel veel Martin doors met with AdAware, Spybot en Avast, nieuwste versies + updated.
  Via CCleaner almost 1000 items doors ITU register. Maar laptop was in verse 5 jaar nooit gescand.
  Mbv van Auslogic Defrag of Reg het register Hotel en Daarna met Puran Defrag in smart stand HD gedefragmenteerd.
  At daarmee tried 10 uur bezig.

  Vrije ruimte op HD was na opschonen en voor defrag iets meer dan 30% (approximately 20 GB).
  1 GB Geheugen
  CPU T1350 1.86
  Op of zou clock 800/1600 Mhz max performance like Smokey AC as als, gecontroleerd met NHC versie 2.06

  Geinstalleerd is XP Edition family 2002 76395 - OEM Service Pack 3 version.

  Na alle active is wel sneller en stabieler geworden als hij echt beim opgestart aanzienlijk laptop.
  Maar die feitelijke opstart doet me denken aan oude IBM Unit.

  Om XP opnieuw overweeg IK you met installeren conservation van alle programma due through repair mode die, I will get vlak voor installatie daadwerkelijke (vergeef me, weet niet even meer official terminology).
  Maar nice weet ik zo niet aan XP CD right 1-2-3 you komen (OEM versie 2002, Packard Bell) en previous pogingen op een ander Packard Bell system via een "normal" install CD mislukten is of incompatibiliteit between both.
  Herstel via F11 overschrijft alles in dat is erg grof.

  Through the event viewer zie ik geen schokkende zaken in ik heb zwembadje of er zijn misschien die sinds kort couriers 'open' service worden bij netwerkdrives. Nee DHS.

  Apparantely mij heb ik alles wat mogelijk normaliter is al Molfetta.

  Mijn questions;
  -Is het mogelijk van die herstelpartitie feitelijke XP you halen en die you start? (ik heb al bij mijn Paradigit een dergelijke thing ITU earlier
  die door reached on een ISO van een heen XP bootable XP points you talk en een nieuwe, old slipstreamed, bootcd you maken.
  -Kan een andere OEM cd used integrated worden dat ik een niet destructieve kan uitvoeren repair.
  In principle ik legaal elke CD heb ter kantoor en staat op laptop good keys.
  Vervelende is the key to altijd dat die NIET connection is als OEM geinstalleerd (heb ik nagekeken) body

  IK hoop dat een van jullie (misschien Gerard oude bekende van het forum MS) of ultimate trick has.

  Finally found.
  Old abandoned since June 1, 2010.
  From there I was able to find the Dutch forum again.

  Bob