Prevent the Notification Autoclose to treat particularly if FYI AutoClose is Yes

Similar Questions

• Prevent the prior Notification / save / print

  We have a duty to prevent a recipient of the notification mail transfer WF / print / backup the email notification.

  How can this be achieved in Oracle workflow?

  Notification preferences are actually associated with the user, we can set the notification level.

  There will be no problem if the same user is also used by other workflows. As the attribute #wf_security_policy defined at the level of the message, only this particular type of notification will have no info message in email.

• Data execution prevention-window Explorer error when I try to access the windows Explorer, and more particularly when I try to watch videos.

  Original title: data execution prevention-window Explorer error

  Data execution prevention launches when I try to access the windows Explorer, and more particularly when I try to watch videos. So I tried to turn off DEP for windows Explorer. Now, I can access my videos, but they all have text on them that says video PHOTO, & www.jpg.com. I have not downloaded new software recently, so I don't know where it comes from. I ran my antivirus sofware and malwarebytes, and my system is to come clean. How can I remove this from my videos? Thank you!

  This isn't how to diagnose and repair the DEP errors - especially not Windows Explorer DEP errors.

  But 6 days of inactivity and a link to an article of a MSE = automatic response.

• Prevent the pre-treatment of missing values

  Is there a way to prevent the automatic preparation of missing values? I would like to see SVM handle them as part of his class in one-class-classification, but it seems to prepare all missing values with hope and fashion through the NVL operation. I think that this affects the ranking of future null values, since they can too. Or is the only way to get around this to feed the future null to the ranking algorithm with similar missing value treatment?
  
  Second thing: someone has a list of xform with ADP examples and create your own transforms for the manual or embedded pre-treatment? Example of the Oracle scripts have none.

  ODM has different interpretations for missing values. They are interpreted as missing at random when they are passed as scalar columns, and they are interpreted as lacking as sparse when passed as nested (for example, dm_nested_numericals). Intend it to match the expected semantics. If the table has a column called "AGE" that has NULL values inside, then ODM interpreter NULL values as unknown - missing at random. Some algorithms (for example, Naïve Bayes) can treat these values by ignoring them. Others need a different type of treatment. SVM will replace with average/mode, just as you mentioned. This behavior is correct if values are in fact unknown. This behavior runs even with ADP is not enabled because it is necessary for a correct interpretation of the data. If it has not been performed, SVM would naturally then treat these missing values as a coding for zero. Although this might be correct in some cases, the most common cases (as in the case of 'ÂGE' above) would lead to an erroneous interpretation. If the encoding with zero is the correct interpretation, the user must replace NULL with 0 (for example, using embedded data preparation) or move the column to a nested representation.
  When the model is marked, this same missing value is always processed (as it is not bound to ADP - this is a correct interpretation of the data). You don't need to do it manually - it is managed as part of the rating model.
  Let me know if that answers your concerns.

  For the second question, here's an example that combines treatment and ADP shipped. You can add the value of "NOPREP" for the argument optional fifth to set_transform to disable the ADP for this particular column during the incorporation of data preparation (in the case below, the embedded data prep is done, then the resulting value ADP).
  create table svm_set)
  setting_name varchar2 (30),
  setting_value varchar2 (30));
  Start
  insert into svm_set values ('PREP_AUTO', 'ON');
  Insert values (svm_set)
  (dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
  end;
  /
  commit;
  declare
  v_xlst dbms_data_mining_transform. LISTE_FICHIERS_TRANSFORMATION;
  Start
  dbms_data_mining_transform.set_transform (v_xlst,
  "YRS_RESIDENCE", NULL, 10 * YRS_RESIDENCE', ' (YRS_RESIDENCE/10 ');
  () dbms_data_mining.create_model
  Model_name-online "svm_adp_edp."
  mining_function-online dbms_data_mining.classification,
  data_table_name-online "mining_data_build_v."
  case_id_column_name-online "cust_id",.
  target_column_name-online "affinity_card."
  settings_table_name-online "svm_set."
  xform_list-online v_xlst);
  end;
  /

  ARI

• How to prevent the launch automatically plug-ins Firefox on Mac?

  Is there an extension that prevents the launch automatically the Firefox plug-ins? When I open a new link, any video on the page automatically begins to play, usually after that I scrolled before the video to read that I'm here for, while I have to scroll upwards or downwards to find in order to stop - slow and slows down my browser - at least it seems to do. Can you help me? Thank you

  Individual plugins can be set to "Click to play" so that they do not start automatically. You can give permission to sites allows to run plugins on a page by page basis or on a site-by-site basis.

  Open the Add-ons page for the Plugins section:

  Tools menu > Modules > in the left column, click on Plugins

  Then for Shockwave Flash, for example, or for QuickTime, change the selector "Always enable" to "ask to activate.

  When you reach a page that wants to use one of these plugins, you will see at least one of them:

  • icon in the address bar that looks like a piece of Lego
  • notification on a gray rectangle dark where video normally would appear
  • information bar slides between the toolbar and the top of the page

  In the dialog box, you can approve the plugin for the current page, or "remember" who approves all pages of the site.

  Try it and see what you think.

• clock in the notifications box no longer displays the date beneith the time

  Series HP Pavilion HPE h8 - 1360t running Win 7

  When I ran Setup and decided that I needed to install the software, I notice that the date is now displayed in the tray under the era.  I was happy that I is no longer my clock application to display the date.

  Now that I've installed all the updates and my usual software, the clock in the notification area displays only the time.  The date seems to have disappeared.

  I don't know what I've done or installed to make it disappear.  I can't find a way to recover.

  Is there a software switch somewhere that turns on the display of the date of the clock?

  Normally, the 'taskbar' are a height of 'one'... the time is displayed. If you unlocked the "taskbar" and stretch up to a height of 'two'... the time, day and date will be displayed. Thereafter, be sure to lock the taskbar to prevent change.

  Please send Bravo

• Prevents the screen turn off - G7X Mark II

  Hello!

  Is this possible on the G7X Mark II to prevent the disabling of the screen?

  I know that there are ways to prevent the stop for 3 minutes, but I am trying to record the screen of my camera to my computer for an indefinite amount of time and must be able to leave my camera "on and alert" when the total capture.

  I would try in a time record camera, but I can't find a way to remove the notification "Rec" of the screen, which can be removed during "sleep."

  Thanks for any help!

  Hi Bamrd,

  Thank you for taking the time to post.

  While the "Display off" option can be adjusted, it can not be disabled.

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• How can I permanently delete an icon from the notification area?

  Whenever I start an icon composed of the white black '9' in a field number appears in the Notification area of my desktop tool bar.

  Whenever I start, I have 'customize' on the toolbar and "hide" icon.  It always comes back.

  Apparently, it has no function.  Make a right click on it, in the hope of finding an option 'discard', produces no response.

  How can I delete the icon?

  My OS is Windows Vista 64 bit Home Premium edition.

  
  Hello
  Steps to remove unused items from the notification area:

  1. click on start-> run and then type regedit in the box that appears, and then click ok

  2. from the tree of directories in the registry editor, navigate to

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\TrayNotify

  3 remove flow and PasteIconStreams icon in the list

  4. exit the registry editor, restart your computer and the items in the notification area should now be gone.

  Disclaimer clause.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Remove icons from the notification area (system tray)

  http://windowshelp.Microsoft.com/Windows/en-us/help/76c95893-0265-47F9-9ff8-47e1d64248e91033.mspx

  I also suggest you to run a full scan on your computer.

  1. Windows Live One care - http://onecare.live.com/standard/en-us/3/default.htm

  2. how to get rid of malicious software

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Kind regards

  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Current Volume icons, network, disappear from the notification area.

  I know that microsoft has heard this problem many times that I read many forums to ask this question.
  I went to this link
  http://support.Microsoft.com/kb/945011
  and used the microsoft fix and it worked for a few weeks, but then the icons disappeared again.
  I tried the Microsoft fix it once more and restarted my computer, but it did not work.
  so I tried to fix it manually by removing the two registry subkeys, restart explorer.exe, and then I restarted my computer.
  still no effect. I also understand that the icons disappear only on this computer user, the user can see the icons in the notification area.

  If this happens only to a single user...
  You might want to try to create a new profile for this particular user. The profile may be damaged.

  You can take a look at this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  t-4-2

• Not configured VM prevents the recovery of the configured virtual machines?

  I try to test a recovery plan. There is a problem with one of the virtual machines on the data store. It has a disc attached to a volume that is not replicated.

  When I run the plan, it logs the error below for all of the active steps after "Suspend Non-critical VMs on recovery Site".

  Error - virtual "name VM" machines that
  are not protected by this protection group use warehouses "Volume name"
  that are in this protection group.

  I understand that I can't protect this particular virtual machine. The question is if it will prevent the other virtual machines being restored or is something else going on?

  If you have a data store in a protection group then * everything * VMs on this data store must be configured for protection, otherwise it will fail.

  That is, if it is not protected SRM is not aware, cannot stop it and which will not be able to remove the data store, etc.

• How to prevent the update IOS 10 Message

  For the last few days everytime I turn on my iPhone, I get a message asking me to upgrade to version 10.  How can I stop this message?  I do it after awhile and the wrinkles have been ironed out.

  Thank you

  Best thing to do is ignore the notification.

• not all the events of the day on the notification screen

  Hello

  I can't get all the events of the day in the calendar widget on the screen of the notification of my iPad. Genius Bar and Apple Support are unable to solve. Can anyone help?

  Thank you

  for this I think should download sparse, ultra calendar application very simple, advanced and simplified

• Impossible to disable the notification app on Apple Watch 2

  Hello

  I recently bought a new series of Apple Watch 2, which comes with the watch as 3 preinstalled OS. I know that all my notifications in instant messaging (whatsapp, wechat) have been reflected on my Apple Watch. I find too boring and I want to turn it off. I followed the instructions (go Apple Watch app on the iphone paired, then notifications, search for the application and then turn off 'iphone mirror'), but it did not work. Notifications will always appear on my watch for these two applications. The only way I can get rid of the notification is to change the style of alert iphone to "none" for both applications. But this way I get the banner on iphone or which is not acceptable.

  So my question is:

  1. What is the settings "mirror iphone alerts" in the menu of notification of Apple Watch app supposed to do? He seems to have no effect at all?
  2. This notification of iphone mirror setting OS level control or that something must be supported by the application in order to have the effect? In other words, if it's a bug, is a watch OS bug or a bug in the application?

  Thank you

  Xinchao

  Hi xinchao

  After you disable the option for ' mirror iPhone alert of "for each application, it can be useful to restart your iPhone and your watch, both off together, and then restart your iPhone first:

  • Restart your iPhone, iPad or iPod touch - Apple Support
  • Restart your Apple Watch - Apple Support

• How to shorten the details displayed by email to the Notification Center iOS 10?

  In iOS 10, each email appears in the Notification Center with a large amount of detail/lines.  Is there a way to configure notifications to display only the subject and sender of new emails, or otherwise reduce the level of detail?  I would rather see less detail in the Notification Center, unless I press article for more details.

  Hello triplegreen,

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to customize how your email will appear in the Notification Center is for you! The good news is that these steps will be useful for your problem, you can go to settings > mail > overview and change for lines 1 or 2, depending on your personal preferences.

  Preview your messages - iPhone user Guide

  See you soon!