previous info showing on the activation screen wrong?

Similar Questions

• Help! Stuck on the activation screen

  Hello

  My grandmother recently asked me to 'fix' his iPad as he kept prompting you to enter the password of his apple whom she did not know ID.  She is 75 years old and bought the iPad two years ago. The iPad uses a recent version of iOS (not sure it exactly, but certainly later than iOs 7).

  When I went into the settings I saw that the Apple - ID for the purposes of this post "[email protected]" - has been used.  Or my grandmother or I knew the password to this ID from apple.  It hurts (and I appreciate this has been my big mistake) thought that the best way to solve this problem was to reset the iPad to its factory settings and then it let me enter a new Apple ID that I have created for her.  Of course, it was the wrong thing to do, but I didn't know it at the time.

  So I reset the iPad and then, when I started, I was introduced to the activation screen it says something in the sense of "this feature must be enabled using the apple"[email protected]"ID."  My grandmother had only an e-mail address in his life, so it must be the identifier apple "[email protected]" that I mentioned above.

  Thus, after a long effort, I managed to understand the email to the email account for the @bigpond.com of my grandmother, then joining I was able to change the password of the apple "[email protected]" by using the function "forgot my password" ID on the official website of apple.

  Now that I had the password "[email protected]" I went back to the activation of the iPad screen and entered the Apple ID and password... only to be tackled with a pop-up message stating something along the lines of "iPad cannot be enabled with this account".

  I don't know what to do now.  My grandmother never had an e-mail address in his life, and the iPad tells me that it requires the ID "[email protected]" to activate it.  It must be the ID '[email protected]' because she never had a single e-mail address and the clues given (for example, "[email protected]") corresponds to "[email protected]".

  I'm completely at a loss what to do from here.  My grandmother has no receipt when she bought the iPad and neither can afford to buy him a new one.  Any help would be greatly appreciated.

  Thank you, Tom.

  If I understand what you're saying correctly, and I think I do, just because you successfully reset the password for Apple ID your grandmother, does not mean that it was the e-mail address that was used to operate the device of origin. Is possible that someone else it enabled for sound using their Apple ID?

• im going to buy an iphone 5s, but how can I pass the activation screen?

  I want to buy an iphone 5s, but the seller has a telephone on the activation screen. I heard things all that you need a sim card in order to bypass the activation screen, but it does not work. any help?

  A SIM card is needed to activate a phone, but I was also worried about the possibility of the iCloud and Activation device locked. Shows exactly what activation screen?

• Follow the sliders on 4 screens 2D in SIGHT - but how can I get the coordinates to display for each instead of just the active screen

  If DIADEM will bother to follow the cursor on all pages in a journal, I think that there is a NON-SCRIPT way to view the values of Y for all.

  My graphics are aligned to the x-axis (couple), 4 - poster (1 for each rpm, HP, power and efficiency), and 2D 10 parcels on each of 4 screens in DIADEM 2010.

  Shows that the box show the active screen coordinates and others are grayed out.  I played a bit with the "cursor settings", but which generates the same although I add appears in the dialog box "coordinated".  I guess it may have something to do with making it automatic, but I see no way to change this and how I assign it to a channel?

  On another note, I want to be able to synchronize all 4 graphs to be on the same plot (legend) track above and read the same data.  So if parcel 1 is selected in the display of RPM, then the other, three will also be on field 1.  I guess it had to be done programmatically, but if not, I'm all ears.

  Hi Tweedy-

  No, you cannot use the .NET code directly in tiara.  I don't know what is the point in suggesting it, because it would require a significant change to be able to use a similar code in DIAdem.

  Have you tried to use the legends of the VIEW?  Expand the legend for each graph, and then double-click the legend, how you can configure what information is displayed on each curve.  By default, the legend displays the name of curve, curve units, X-Position (the cursor) and (the slider) Y-Position.  Do not hesitate to complete or the contract depending on your preference.

  After having developed each legend, switch to slider Curve and you should be able to see the Y Position of each curve, fully synchronized.

  

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• How to get the active screen of the BlackBerry application?

  Hello

  I'm trying to get the active screen of the BlackBerry application, for example the home menu.

  I tried to use the screen ActiveScreen = getUiEngine () .getActiveScreen () in my code, but found error during execution.

  I know that this is because the getActiveScreen() method applies only for screens created by this application.

  So is there a way to capture the screen of the other application, for example the mail filter BlcackBerry?

  Thank you.

  Not wanting to not to repeat me, but there is no general way to get access to the Screen of another application object, unless you are on good terms with this application - which basically means that you have access to the instance UiApplication.  You cannot ask the operating system to get that to you, you must have a way to get you.  Which implies execution of something in the context of the Application.

  Even in this case, you may not be able to do what you want.  You will probably need to iterate over the screen and content managers and find the field you want, and even if it covers anything you understand (like BasicEditField) it still cannot handle standard things like setText in a way that is useful to you.  And you might not find fields you recognize, if you access a browser screen, I think you'll find there \are RIM not standard fields in there, so there is nothing you can interact from a standard application of the RIM.

  If you want to do this kind of treatment in General, that will deal with in a number of applications, you should watch event Injection.

  There may be other options for specific applications.  For example, you can simulate of electronic mail by writing a program that sends an email, rather than interact with the BlackBerry.  Or for the same application, if you try to test the headphones, then the listener has access to the UiApplication.  Aye, we be able to help you find approaches less General in some places, if we understand what you're trying to do.  This is the reason for the specific question that I asked in my last post.

  Regarding your second question

  "Another question is, can two separate applications of myself interaction by the user interface?

  For example, to call app2. ButtonField.click () or something. »

  It is in fact just an extension to your first question.  The difference is that you will find the UiApplication associated if both applications are on good terms, in fact you can "spend" the UiApplication via a Global event.  Once you have the UiApplication, you can use

  .invokeLater (...)

  to run the user interface code in the other Application.

  But I look at injector event because I think it might be a more general solution.

• Update the active screen

  Hi all

  It seems that Motorola updated active display via game store this morning - as he seems not correct the 'delay' in the opening of any notification.

  But now when you slide to unlock or read a message, send etc. you now see the first screen locking forward to go in hand screen.

  Looks like it would be much better if he went straight into what you were trying to get to rather than displaying the lock screen all...

  What do you think?

  This is the best we could do this fast. We will further improve in the future, but feel that it is a significant improvement on the previous situation.

• Computer lock up after the active screen saver. __

  The problem: after the screensaver kicks in if I stop I'm usually back in the log on screen, however, if the computer starts to slow down, sleep, CV, I get a black screen and I can hear the computer still active in the background and I can hot key to open applications, but all I see is a black screen. Sometimes I see the mouse on the black screen. My resolution is to turn it off and turn it back on.

  Any ideas, I played with the Device Manager and deleted a few? the elements and rebooted to see if any device driver was causing the problem. I played around with the screen saver and power management and tried different settings and nothing works.

  See you soon.

  http://help.ISU.edu/index.php?action=FAQ&CATID=79&docid=396

  FAQ - How to remove the Windows Screen Saver password

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Storm cannot focus on the field that wasn't a show on the first screen

  Hi all

  I have an application works very well on all devices except the device of the storm.

  If there are field mutil-focus on the screen, if the fields are not display when the display is launched,

  even if you move the screen to show, it can be still not developed.

  my request:

  /*
   * App.java
   *
   * © , 2003-2005
   * Confidential and proprietary.
   */
  
  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.ui.component.*;
  
  /**
   *
   */
  public class App extends UiApplication{
      public static void main(String arg[]){
          UiApplication app = new App();
          app.enterEventDispatcher();
      }
      public App() {
          pushScreen(new AScreen());
      }
      public class AScreen extends MainScreen
      {
          private VerticalFieldManager vfm = new VerticalFieldManager();
          public AScreen()
          {
              super(NO_VERTICAL_SCROLL);
              PartScrollableManager man = new PartScrollableManager(true);
              this.add(man);
              man.addHeadField(new ButtonField("Head"));
              for(int i=0;i<2;i++){
                  man.addBodyField(new LabelField("label"+String.valueOf(i),Field.USE_ALL_HEIGHT|Field.USE_ALL_WIDTH|Field.FOCUSABLE));
              }
              man.addBodyField(vfm);
              addField();
              for(int i=3;i<10;i++){
                  man.addBodyField(new LabelField("label"+String.valueOf(i),Field.USE_ALL_HEIGHT|Field.USE_ALL_WIDTH|Field.FOCUSABLE));
              }
              //man.addFootField(new ButtonField("Foot"));
              //man.addFootField(new EditField("Foot",""));
          }
  
          private void addField()
          {
              for(int i=0;i<9;i++){
                  vfm.add(new EditField(String.valueOf(i),""));
              }
          }
  
          public boolean trackwheelClick(int status,int time){
              Field f = this.getLeafFieldWithFocus();
              if(f instanceof ButtonField){
                  synchronized(UiApplication.getEventLock()){
                      if(vfm.getFieldCount()==0){
                          addField();
                      }else
                          vfm.deleteAll();
                  }
                  return true;
               }
               return false;
          }
      }
  }
  

  /*
   * PartScrollableManager.java
   *
   * © , 2003-2005
   * Confidential and proprietary.
   */
  
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.ui.*;
  import net.rim.device.api.system.Display;
  
  /**
   *
   */
  public class PartScrollableManager extends VerticalFieldManager{
  
      private int MANGER_HEIGHT = Display.getHeight();
      private VerticalFieldManager headManager;
      private VerticalFieldManager footManager;
      private VerticalFieldManager bodyManager;
      private boolean isBorder;
      int rheight = 0;
      public PartScrollableManager(boolean border) {
          super(USE_ALL_HEIGHT | USE_ALL_WIDTH | NO_VERTICAL_SCROLL);
          isBorder = border;
          headManager = new VerticalFieldManager(USE_ALL_WIDTH |NO_VERTICAL_SCROLL);
          footManager = new VerticalFieldManager(USE_ALL_WIDTH |NO_VERTICAL_SCROLL);
          bodyManager = new VerticalFieldManager(USE_ALL_WIDTH |VERTICAL_SCROLL){
              protected void sublayout(int width,int height)
              {
                  int count = this.getFieldCount();
                  int h = 0;
                  for(int i=0;ithis.getHeight()) return super.touchEvent(ev);
              if(ev.getEvent()==TouchEvent.DOWN){
                  try{
                      setFocus(ev.getX(1),ev.getY(1),0);
                  }catch(Throwable ex){
                      System.out.println("ex : " +ex.toString());
                  }
              }
              boolean result = super.touchEvent(ev);
              int size = ev.getMovePointsSize();
              if(size>=2){
                  int vheight = this.getVirtualHeight();
                  int dheight = this.getVisibleHeight();
                  int xs[] = new int[size];
                  int ys[] = new int[size];
                  int ts[] = new int[size];
                  ev.getMovePoints(1,xs,ys,ts);
                  int dy = ys[size - 1] - ys[0];
                  verticalScroll = Math.min(Math.max(verticalScroll - dy, 0), rheight - dheight);
                  try{
                      setVerticalScroll(verticalScroll);
                  }catch(Throwable ex){
                      System.out.println("ex : " +ex.toString());
                  }
              }
              return result;
          }
  
          };
          this.add(headManager);
          this.add(bodyManager);
          this.add(footManager);
          headManager.add(new SeparatorField());
          footManager.add(new SeparatorField());
      }
  
      private void drawBorder(Graphics g)
      {
          int color = g.getColor();
          g.setColor(Color.BLACK);
          XYRect rect = g.getClippingRect();
          g.drawRect(0,0,rect.width,rect.height);
      }
  
      public void addHeadField(Field f){
          headManager.insert(f,headManager.getFieldCount()-1);
      }
      public void addFootField(Field f){
          footManager.add(f);
      }
  
      public void addBodyField(Field f){
          bodyManager.add(f);
      }
      public void setHeight(int height){
          MANGER_HEIGHT = height;
      }
      protected void sublayout(int width,int height)
      {
         layoutChild(headManager,width,height);
         layoutChild(footManager,width,height);
         layoutChild(bodyManager,width,height);
         setPositionChild(headManager,0,0);
         setPositionChild(bodyManager,0,headManager.getHeight());
         setPositionChild(footManager,0,Display.getHeight()-footManager.getHeight());
         setExtent(Display.getWidth(),MANGER_HEIGHT);
      }
  }
  

  What is wrong with my code?

  any advice would be appreciated.

  Hi guys,.

  I found the reason.

  for touchscreen, when setExtent, you define the actual size, so when you scroll, it will work correctly.

  Otherwise, so just set as visiable, it will never be setFocus on the field which is visible beyond.

  I guess RIM internal API regal setExtent is life-size on the touch screen, not even as no touchscreen.

  It is visiable size and size of the actual content.

  See you soon.

• The active screen is suddenly smaller than my current screen

  How to restore the active display at its actual size?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not fix it:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones Facebook icon not showing on the home screen

  The facebook icon does not appear on the home screen.  I deleted the facebook app, downloaded again, removed the battery, resent service books, re-registered my Blackberry.  Nothing works.  Any help?

  1. look in EVERY folder on your device... Applications, instant messaging, downloads, etc.
  If you don't see it still, look at the Options > advanced > Applications. Do you not see it listed there?

  2 is it hidden? On your home screen, press Menu > SHOW ALL, so that ALL DISPLAY is checked.

  Now, back in ALL these folders.

• Can't get downloaded android applications to show on the home screen

  Applications Android display on the home screen while downloading, but then disappear and only can be found in the settings/tv/apps/downloaded apps

  Try to restart...

  Press and hold the Power button on the remote control.

  If this does not help, you may need to erase the data on the home screen application. Let us know if restarting solves the problem.

• BlackBerry Z10 Andriod App icon not showing on the home screen

  I have already downloaded an Android application and later deleted by pressing the icon of the application by clicking on the small icon DELETRE

  Recently, I need the same application and went to download and app said it was already installed - clicked open and Yes this is

  When you are finished closed the app--but there is no icon on the home screen

  How can I get this icon will appear on the homescreen again

  With the help of a BB Z10: 10.3.2.2826 software

  Thank you

  Hello DERC

  You must update BlackBerry Runtime for android, as described in this KB:

  Impossible to uninstall Android applications after update of 10 BlackBerry OS version 10.3.2

  Good luck.

• DW CS6 test server shows only the login screen of my site. Can't do under the hood live wiew. The pages I want to change/modify is visible only when I connect but I do not know how to reolve that.

  I'm trying to edit a CMS site to my needs and "open" pages is not serious, that is to say those that do not require the user to connect to. I can see and I can modify them according to my needs.

  The trickiest part is when I want to change/modify something inside. Then it wont let me. The only thing I see is the "Login" screen I can see the code and I can do what I need, but when I turn on 'Live wiew' is the log in page that greets me

  
  Tests of servers is correct because I can use it in my localhost

  Connection MySQL works as it should (Test OK)

  I guess that's something that has to do with permissions, but I don't know what.

  A CMS site, the page is usually filled with data that is stored in a database using a scripting language on the server side. Unfortunately, the Design mode only supports a static language like HTML, there is therefore no recovery information from the database.

  The only way out of your situation is to temporarily remove the permission to the user to the page that you are editing so that you do not to log-in each time. The problem is that you may forget to reactivate the authorization.

  What I always do is to open the site in a browser and verify the change in DW refreshing the page in the browser. In this way, you need to log-in once.

• Once the data popluted how we show in the main screen.

  Hi all
  
  I created two buttons as homepage
  
  1. New Contact
  2. the new entity.
  
  When you click each button I see items 'fields' under 'pop-up' screens. Once the data are filled under pop up screens and click on submit button, we now show the details contained in the home page. How we achieve
  
  
  My thought is
  
  1. at the outset, we need to have two regions covered in leather. Once they click on the respective buttons a pop up screen will appear and are filled with data, and click on submit button
  main regions should then be visible areas with integrated data.
  2. my doubt is how we appear in text fields... Since then, we will have close to 5 additional fields.
  3 it is any better approach for this?
  
  Thank you
  David...

  Hello

  I had a look at your app, it works now.

  A little less look at the code and understand what you are using and passing the values, do not forget to mark the right answer as before

  Thank you