The active screen is suddenly smaller than my current screen

Similar Questions

• Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  original title: Auto Adjust

  Hello.

  Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.

  I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.

  Any help would be appreciated... Thank you

  Try this:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Help! Stuck on the activation screen

  Hello

  My grandmother recently asked me to 'fix' his iPad as he kept prompting you to enter the password of his apple whom she did not know ID.  She is 75 years old and bought the iPad two years ago. The iPad uses a recent version of iOS (not sure it exactly, but certainly later than iOs 7).

  When I went into the settings I saw that the Apple - ID for the purposes of this post "[email protected]" - has been used.  Or my grandmother or I knew the password to this ID from apple.  It hurts (and I appreciate this has been my big mistake) thought that the best way to solve this problem was to reset the iPad to its factory settings and then it let me enter a new Apple ID that I have created for her.  Of course, it was the wrong thing to do, but I didn't know it at the time.

  So I reset the iPad and then, when I started, I was introduced to the activation screen it says something in the sense of "this feature must be enabled using the apple"[email protected]"ID."  My grandmother had only an e-mail address in his life, so it must be the identifier apple "[email protected]" that I mentioned above.

  Thus, after a long effort, I managed to understand the email to the email account for the @bigpond.com of my grandmother, then joining I was able to change the password of the apple "[email protected]" by using the function "forgot my password" ID on the official website of apple.

  Now that I had the password "[email protected]" I went back to the activation of the iPad screen and entered the Apple ID and password... only to be tackled with a pop-up message stating something along the lines of "iPad cannot be enabled with this account".

  I don't know what to do now.  My grandmother never had an e-mail address in his life, and the iPad tells me that it requires the ID "[email protected]" to activate it.  It must be the ID '[email protected]' because she never had a single e-mail address and the clues given (for example, "[email protected]") corresponds to "[email protected]".

  I'm completely at a loss what to do from here.  My grandmother has no receipt when she bought the iPad and neither can afford to buy him a new one.  Any help would be greatly appreciated.

  Thank you, Tom.

  If I understand what you're saying correctly, and I think I do, just because you successfully reset the password for Apple ID your grandmother, does not mean that it was the e-mail address that was used to operate the device of origin. Is possible that someone else it enabled for sound using their Apple ID?

• How to get the active screen of the BlackBerry application?

  Hello

  I'm trying to get the active screen of the BlackBerry application, for example the home menu.

  I tried to use the screen ActiveScreen = getUiEngine () .getActiveScreen () in my code, but found error during execution.

  I know that this is because the getActiveScreen() method applies only for screens created by this application.

  So is there a way to capture the screen of the other application, for example the mail filter BlcackBerry?

  Thank you.

  Not wanting to not to repeat me, but there is no general way to get access to the Screen of another application object, unless you are on good terms with this application - which basically means that you have access to the instance UiApplication.  You cannot ask the operating system to get that to you, you must have a way to get you.  Which implies execution of something in the context of the Application.

  Even in this case, you may not be able to do what you want.  You will probably need to iterate over the screen and content managers and find the field you want, and even if it covers anything you understand (like BasicEditField) it still cannot handle standard things like setText in a way that is useful to you.  And you might not find fields you recognize, if you access a browser screen, I think you'll find there \are RIM not standard fields in there, so there is nothing you can interact from a standard application of the RIM.

  If you want to do this kind of treatment in General, that will deal with in a number of applications, you should watch event Injection.

  There may be other options for specific applications.  For example, you can simulate of electronic mail by writing a program that sends an email, rather than interact with the BlackBerry.  Or for the same application, if you try to test the headphones, then the listener has access to the UiApplication.  Aye, we be able to help you find approaches less General in some places, if we understand what you're trying to do.  This is the reason for the specific question that I asked in my last post.

  Regarding your second question

  "Another question is, can two separate applications of myself interaction by the user interface?

  For example, to call app2. ButtonField.click () or something. »

  It is in fact just an extension to your first question.  The difference is that you will find the UiApplication associated if both applications are on good terms, in fact you can "spend" the UiApplication via a Global event.  Once you have the UiApplication, you can use

  .invokeLater (...)

  to run the user interface code in the other Application.

  But I look at injector event because I think it might be a more general solution.

• im going to buy an iphone 5s, but how can I pass the activation screen?

  I want to buy an iphone 5s, but the seller has a telephone on the activation screen. I heard things all that you need a sim card in order to bypass the activation screen, but it does not work. any help?

  A SIM card is needed to activate a phone, but I was also worried about the possibility of the iCloud and Activation device locked. Shows exactly what activation screen?

• Follow the sliders on 4 screens 2D in SIGHT - but how can I get the coordinates to display for each instead of just the active screen

  If DIADEM will bother to follow the cursor on all pages in a journal, I think that there is a NON-SCRIPT way to view the values of Y for all.

  My graphics are aligned to the x-axis (couple), 4 - poster (1 for each rpm, HP, power and efficiency), and 2D 10 parcels on each of 4 screens in DIADEM 2010.

  Shows that the box show the active screen coordinates and others are grayed out.  I played a bit with the "cursor settings", but which generates the same although I add appears in the dialog box "coordinated".  I guess it may have something to do with making it automatic, but I see no way to change this and how I assign it to a channel?

  On another note, I want to be able to synchronize all 4 graphs to be on the same plot (legend) track above and read the same data.  So if parcel 1 is selected in the display of RPM, then the other, three will also be on field 1.  I guess it had to be done programmatically, but if not, I'm all ears.

  Hi Tweedy-

  No, you cannot use the .NET code directly in tiara.  I don't know what is the point in suggesting it, because it would require a significant change to be able to use a similar code in DIAdem.

  Have you tried to use the legends of the VIEW?  Expand the legend for each graph, and then double-click the legend, how you can configure what information is displayed on each curve.  By default, the legend displays the name of curve, curve units, X-Position (the cursor) and (the slider) Y-Position.  Do not hesitate to complete or the contract depending on your preference.

  After having developed each legend, switch to slider Curve and you should be able to see the Y Position of each curve, fully synchronized.

  

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• Update the active screen

  Hi all

  It seems that Motorola updated active display via game store this morning - as he seems not correct the 'delay' in the opening of any notification.

  But now when you slide to unlock or read a message, send etc. you now see the first screen locking forward to go in hand screen.

  Looks like it would be much better if he went straight into what you were trying to get to rather than displaying the lock screen all...

  What do you think?

  This is the best we could do this fast. We will further improve in the future, but feel that it is a significant improvement on the previous situation.

• previous info showing on the activation screen wrong?

  I tried to contact the number on my lock of activation screen, but this number is wrong. You guys could tell me how to contact the previous owner?

  If there is no contact details of work on the lock screen, there is no way to contact the previous owner. Apple can't help you and cannot anyone on these forums. I'm afraid that without your power contact him and get him to remove your phone lock is definitely unnecessary.

• Computer lock up after the active screen saver. __

  The problem: after the screensaver kicks in if I stop I'm usually back in the log on screen, however, if the computer starts to slow down, sleep, CV, I get a black screen and I can hear the computer still active in the background and I can hot key to open applications, but all I see is a black screen. Sometimes I see the mouse on the black screen. My resolution is to turn it off and turn it back on.

  Any ideas, I played with the Device Manager and deleted a few? the elements and rebooted to see if any device driver was causing the problem. I played around with the screen saver and power management and tried different settings and nothing works.

  See you soon.

  http://help.ISU.edu/index.php?action=FAQ&CATID=79&docid=396

  FAQ - How to remove the Windows Screen Saver password

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• The android app icon is smaller than the native applications on Dev Alpha

  It is somehow related to http://supportforums.blackberry.com/t5/Android-Runtime-Development/apk2bar-resizes-the-app-icon-to-8...

  However, even if I have difficulty icon resized, changing the bar produce and pack a 150 x 150 icon, on DevAlpha (10.0.9.388) the icon looks like smaller than the icon of a native application (if WebWorks or Cascades). I also used the setting - os to target only the BB 10 but without results.

  Is there something that I need to specify the apk2bar command?

  Thanks for your help.

  This has been fixed in DevAlpha 10.0.9.1103.

• The size of the Flash movie displays much smaller than it should be...

  http://designersedge01.mattswinehart.com/designersedgeintronew.html

  Hello. I can't understand why the swf file is so small. I published it to 100% width & height (I want it to be full screen) but it appears only as 216 pixels maximum.

  It's probably just a setting somewhere that I'm on.

  I'm the see up to 100% in Chrome.

  However, as I look at the code, it seems that you did not place the typical html and style body that is needed to make 100% width/height:

  HTML, body {}

  height: 100%;

  padding: 0;

  margin: 0;

  }

• Is it possible to have the accordion of top boxes smaller than the content of a menu drop-down?

  I am trying to create a drop-down list for my desktop site. The problem is the roll over area covers the other links (on us and facilities). Is there a way to make the box expanded content or the first dropdown to be narrower than the content area? Or is there a better way to implement?

  Thanks in advance!

  

  Have you tried composition of the ToolTip? In the composition of the balloon, the size of the trigger and target are not interrelated.

  And you can also hide the target area once you have finished the design by unchecking 'Lightbox see the part when editing'

  The only thing missing here is the transition as ToolTip composition has an effect of discoloration.

  Concerning

  Vivek

• You are prompted to reactivate Windows after the updates but the activation screen empty.

  Yesterday, after the Windows updates, I was prompted to reactivate Windows in 3 days but activation dropdown was blank.

  This is MGAdiag report.

  Bill

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - H62RJ - GYBCR-WMJGT
  Windows product key hash: VFmeKHHQn3RyKvzwppN6EX + = PLbM
  Windows product ID: 76477-007-5077027-21604
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010300.3.0.hom
  ID: {FF0EF72C-5B92-48A7-BC5D-9CA06A532725} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: registered 1.9.9.0's,
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Standard Edition 2003 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-800a_E2AD56EA-766-191_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {FF0EF72C-5B92-48A7-BC5D-9CA06A532725}1.9.0027.05.1.2600.2.00010300.3.0.homx 32*-*-*-*-WMJGTS-1-5-21-1275210071-1801674531-83952211576477-007-5077027-216045MICRO-STAR INTERNATIONAL CO., LTDMS-7238American Megatrends Inc.. V1.3 20070105000000.000000 + 0000E563C8701846C7A08090409GMT Standard Time(GMT+00:00)03100100Microsoft Office Standard Edition 2003116Ec3jQmb7EXXuT4ag6Ai3ekupaM =70141-745-1390177-562171 1DCE0596ED8FDD2

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  BIOS marker string: 13 22: REAL C & C INC | 16AAE:sharp Corp.,
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Hi Bill,

  ·         The computer starts in safe mode?

  If so, check to see if this article helps you.

  Blank page to activate Windows in the wizard of Windows Product Activation

  Do not respond with results so that we can help you best.

• Cannot install factory reinstall the CD/USB on drives smaller than what came with the computer. Need to fix it as soon as POSSIBLE!

  Recently installed Samsung 840 Evo SSD in my Dell Inspiron 15r 5537. They created the restore disc factory of the previous disc thought they would just install on the new SSD. After trying to install get you a mass that told you can't reinstall on drives less than 400 some odd gigabytes. I thought I'd try an OEM of Windows 8 CD version I have. Who does not install as well you get a message that says something like: "the current installed does not match the product key." So now I'm stuck with a new computer with a SSD brand new and I can not install an operating system on it. I bought six machines from Dell in the past six months and I want a cure for this ASAP or will ever I bought a Dell product. James

  Hi James,

  You cannot use any old disk OEM of Windows 8. You need a Dell Windows 8 disc. Click here to order a.