Computer lock up after the active screen saver. __

Similar Questions

• My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  Original title: XP Pro crashes when MB died and move new HDD PC.

  My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

  I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

  Thanks for any help...

  Hello

  If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

• I have xp pro I have activated telephone went through all the steps said active windows computing took me to the login screen, but when I try to log in, it tells me I have activated windows

  I have xp pro I have activated telephone went through all the steps said active windows computing took me to the login screen, but when I try to connect, it tells me that I need to activate windows so I click on activate the itr tells me that windows is already activated, then takes me in the newspaper and did the same thing

  To delete the message you are already enabled, you can force the activation on reboot. If the wpa.dbl and wpa.bak are damaged, they can cause a problem.
  Restart in 'Safe Mode '.
  Rename wpa.dbl and wpa.bak files located in the the\Windows\system32 folder
  Now, the message must be deleted, and you can now re-enable. TaurArian [MVP] 2005-2010 - Update Services

• How to bypass the login screen of the mode standby in Windows 7 Professional with active screen saver

  Here is the solution/answer:

  1. go in Control Panel

  2. click on "personalization."

  3. on the lower right corner to say 'screen saver '. Click on screen saver.

  4. in the scree of Eve window between the 'Screensaver' name and the power management box is empty 'Wait' then 'minutes '.

  Right of "minutes" is a block that says "on resume, display the login page.»

  5. If the "On Resume, the logon screen" box is check uncheck.

  6. click 'OK' your done

  This works if you have an active screen saver and works.

  Hello

  Good thing Mark a. Kite!

  Anyone having this problem should also consult:

  Control Panel - Power Options - left requires a password on Wake-Up - tick don't
  Require a password - save the changes.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help! Stuck on the activation screen

  Hello

  My grandmother recently asked me to 'fix' his iPad as he kept prompting you to enter the password of his apple whom she did not know ID.  She is 75 years old and bought the iPad two years ago. The iPad uses a recent version of iOS (not sure it exactly, but certainly later than iOs 7).

  When I went into the settings I saw that the Apple - ID for the purposes of this post "[email protected]" - has been used.  Or my grandmother or I knew the password to this ID from apple.  It hurts (and I appreciate this has been my big mistake) thought that the best way to solve this problem was to reset the iPad to its factory settings and then it let me enter a new Apple ID that I have created for her.  Of course, it was the wrong thing to do, but I didn't know it at the time.

  So I reset the iPad and then, when I started, I was introduced to the activation screen it says something in the sense of "this feature must be enabled using the apple"[email protected]"ID."  My grandmother had only an e-mail address in his life, so it must be the identifier apple "[email protected]" that I mentioned above.

  Thus, after a long effort, I managed to understand the email to the email account for the @bigpond.com of my grandmother, then joining I was able to change the password of the apple "[email protected]" by using the function "forgot my password" ID on the official website of apple.

  Now that I had the password "[email protected]" I went back to the activation of the iPad screen and entered the Apple ID and password... only to be tackled with a pop-up message stating something along the lines of "iPad cannot be enabled with this account".

  I don't know what to do now.  My grandmother never had an e-mail address in his life, and the iPad tells me that it requires the ID "[email protected]" to activate it.  It must be the ID '[email protected]' because she never had a single e-mail address and the clues given (for example, "[email protected]") corresponds to "[email protected]".

  I'm completely at a loss what to do from here.  My grandmother has no receipt when she bought the iPad and neither can afford to buy him a new one.  Any help would be greatly appreciated.

  Thank you, Tom.

  If I understand what you're saying correctly, and I think I do, just because you successfully reset the password for Apple ID your grandmother, does not mean that it was the e-mail address that was used to operate the device of origin. Is possible that someone else it enabled for sound using their Apple ID?

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite M40 - 129 stops starting after the Toshiba screen

  Hello
  My M40 continues sometimes to start after the Toshiba screen. He stops and all I see is the blinking cursor. No Error Message or something else and normal boot from the HARD drive. Boot from CD (for example. Œuvres of Knoppix). This problem sometimes occurs and traceable for me isn´t.

  Best regards
  Spoony

  Hey Spoony

  Unfortunately on this path, it is not easy to say why this is happening. Each user has a specific configuration OS and we don t know how your operating system is configured.

  You can boot OS in safe mode? If Yes check what the problem may be a little. If there is anything you can do I recommend you save all your data and preinstall unit using rescue media. If you do this I recommend also to create two partitions.

  Don t compare WXP and Linux startup procedure. As you know that Knoppix using just the RAM and no HARD drive for the race.

• im going to buy an iphone 5s, but how can I pass the activation screen?

  I want to buy an iphone 5s, but the seller has a telephone on the activation screen. I heard things all that you need a sim card in order to bypass the activation screen, but it does not work. any help?

  A SIM card is needed to activate a phone, but I was also worried about the possibility of the iCloud and Activation device locked. Shows exactly what activation screen?

• Follow the sliders on 4 screens 2D in SIGHT - but how can I get the coordinates to display for each instead of just the active screen

  If DIADEM will bother to follow the cursor on all pages in a journal, I think that there is a NON-SCRIPT way to view the values of Y for all.

  My graphics are aligned to the x-axis (couple), 4 - poster (1 for each rpm, HP, power and efficiency), and 2D 10 parcels on each of 4 screens in DIADEM 2010.

  Shows that the box show the active screen coordinates and others are grayed out.  I played a bit with the "cursor settings", but which generates the same although I add appears in the dialog box "coordinated".  I guess it may have something to do with making it automatic, but I see no way to change this and how I assign it to a channel?

  On another note, I want to be able to synchronize all 4 graphs to be on the same plot (legend) track above and read the same data.  So if parcel 1 is selected in the display of RPM, then the other, three will also be on field 1.  I guess it had to be done programmatically, but if not, I'm all ears.

  Hi Tweedy-

  No, you cannot use the .NET code directly in tiara.  I don't know what is the point in suggesting it, because it would require a significant change to be able to use a similar code in DIAdem.

  Have you tried to use the legends of the VIEW?  Expand the legend for each graph, and then double-click the legend, how you can configure what information is displayed on each curve.  By default, the legend displays the name of curve, curve units, X-Position (the cursor) and (the slider) Y-Position.  Do not hesitate to complete or the contract depending on your preference.

  After having developed each legend, switch to slider Curve and you should be able to see the Y Position of each curve, fully synchronized.

  

• SignalExpress closes immediately after the splash screen

  I'm having a problem with the Software NI SignalExpress where the application fails to open completely - it closes immediately after the splash screen. I am using windows XP Pro. SP3.

  I tried to uninstall, registry errors compensation and reinstall, I also tried the repair installation - or who work.

  A test of SignalExpress installation was installed on my PC until I got a full copy with the purchase of a data acquisition (usb-6218).

  Hi André,.

  Sounds a bit nasty. If repairing and reassembling and all this malarky does not recommend the use of msiblast to clean your computer of all the software of NOR and starting again with a new install. When you software uninnstall he didn't get rid of everything, there is still hidden folders around dootted.

  I joined msiblast.exe.

  -Run msiblast

  -Make sure the radio button "Show OR installers only" is selected.

  -Select all and then click on uninstall.

  When this is complete, your computer will be NOT free. After that;

  -Install all software from OR you for example LabVIEW Signal express

  -Then install the drivers. The USB-6218 case uses the DAQmx driver that the latest version can be downloaded from this link.

  If it persists then write again.

  Kind regards

• How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

  March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

  Hello

  If you think the update caused the blue screen then uninstall it to check.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ==============================================================

  If not, remove the updates help then we can troubleshoot the BlueScreens.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Blue screen in Vista 7 just after the login screen

  We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears.  The blue screen immediately goes, and system restarts (or sometimes just hangs).  I was not able to find the codes of the 7th in the research:

  (took a picture of the screen...)

  STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)

  I am able to boot in safe mode.  Do you have a chkdsk C: /F and which did not help.  Do you have a repair system using the Vista startup disk and that did not help.   Went to safe mode and MSCONFIG and position the clean boot and that did not help.  I tried to update to SP2 and unable to complete safe mode.

  The ideas and the sage advice would be greatly appreciated.

  Pete

  Hello

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------------------------

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  

  Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

  Important info if you received a STOP Code
  
  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters

  The following settings appear on the blue screen.

  To view the settings, click on this link.
  http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

  CAUSE

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP MS235 pavilion in a single reboot after the start screen guard

  Hi all.

  can anyone help wih this problem I have with my computer hp pavilion MS235 that keeps just reboot after the splash screen.

  What happens is that the system began to hang at start up. It would take about an hour to get to the Welcome screen. could not do anything even not to make a recovery, so I put the drive in another machine and he made a new installation. but since then it just keeps restarting to the start screen. I ran all kinds chech af, but nothing works.  I'm on win 7 x 64.

  Please can someone help! Thank you.

  Concerning

  Dave.

  Start at this page: http://support.hp.com/us-en/document/bph07143

  Or here: http://www.computersurgeons.com/SearchProducts.aspx?sbt=pavilion%20MS235&bkm=Results#Results

• Win XP crashes after the splash screen (charge PointSec)

  I have a laptop lenovo t400, which has Pointsec Encryption (6.1.3), and WinXP loaded thereon.

  I ran the update tool think that Vantage Lenovo that has downloaded and installed a number of updates - I didn't run it for centuries.

  Now when I try to start the computer it crashes after the XP splash screen is displayed. Simply, the screen goes black.

  I tried the options Mode safe (include VGA Mode and start with the last successful configuration) without success. Also, they fail to start.

  The flow rate is:

  Power On, screen authentication PointSec, Win XP Splash screen, and then a black screen

  I got successfully into the system using UBCD4Win with pointsec plugin loaded, load a WinPE environment on a USB and allows me to access the C: drive unencrypted (as I've authenticated with Pointsec).

  I'm really stuck for ideas as to the update is the cause of the problem and I'd love to hear some suggestions on how to remedy this situation.

  --

  Additional information:

  The last lines in ntbtlog.txt is:

  Not load the parallel driver live

  Did not load driver bios SM service

  Did not load driver SM bus service

  Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS

  Search:

  c:\Windows\$NtServicePackUninstall$

  Looks like that Service Pack 3 has been installed:

  File: spuninst\spuninst, inf shows:

  NtServicePackVersionText = "Service Pack 3".
  NtServicePackPreviousVersionText = "Service Pack 2".

  Fixed!

  The problem has been updates to lenovo (probably guilty being the video driver that I presume).

  Using UBCD4Win with pointsec plugin I was able

  * Access to the decrypted c:

  * Restored manually updates to c:\windows\system32 and c:\windows\system32\drivers

  Original files have been found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles

  * Finally, I had to roll back updates of the register who did the updates. UBCD4Win offers a tool to do this: the registry Restore Wizard. He basically just look in c:\System Volume Information System Restore directory and lists all the Restore Points available (Fortunately the Lenovo updates mark a restore point until they run). You can also do it manually using the following instructions:

  http://hypography.com/forums/tutorials-and-how-tos/17193-XP-recovery-instructions-for-UBCD4Win.html

  This makes the system successfully booted.

  I've most definitely will be staying clear after you press the big blue button in the future. It was a nightmare to fix.