Price bulk units of e-commerce?

Similar Questions

• unit price

  I'm loading price per units by division (level 0) as recorded values. I have defined it as tb average, lack of jump and zeros. BUT, when it becomes Calc price to the parent company of the division of level 0, we add them up. How should I charge prices. they are stored, no? It is essential for all calculations of income. but I can't go through the aggregation of prices at the parent level.
  
  
  Child1 Child2
  price $5 4
  
  the $5 and $4 is responsible
  
  and then
  
  parent
  price $9
  
  Help!

  TBAverage gives you the average to higher levels of consolidation time: neighborhoods and Hyrs.
  But he's going to consolidate for other dimensions such as division. This is how it works.
  If you want to get the average price of all divisions of the worksheet, create another avgprice measure and calculate using the formula or member calc script.

  If you do not create another measure, the childs consolidation (~)
  and that the parent as dynamic calc and calculatye using the formula

  If (@ismbr ("price"))
  parent = @avg (@relative ('parent', 0));
  on the other
  parent = @sum (@relative ('parent', 0));
  endif

  But the second approach is not a good idea.

• Satellite P105-S921 available to the United Kingdom?

  Hello
  I was wondering if anyone knows when this impressive machine to research will be available in the United Kingdom...

  Theres a comment here:
  http://reviews.CNET.com/Toshiba_Satellite_P105_S921/4505-3121_7-31812922.html

  Looks really nice and a good price (the United States) too.

  Hello

  Well, the Satellite P105 is designed for an American market.
  Satellite P100 is designed for the European market, and I guess that it supports the same features as the Satellite P105.

  Please check this page from Toshiba for details on the different models of Satellite
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/model_index_page.jsp?service=EU&ID=2326

• Bulk will not charge tenants / / hangs on "Loading"... »

  This is a brand new installation of bulk 6.2.1 build 2553372 with the device of identity management.  After deployment/configure two devices, I get authenticated as [email protected] but I never see the tenant default, just the "Loading" message... ».  Attempt to add a tenant gives an error similar to:

  Internal error

  An internal error has occurred. If the problem persists, contact your system administrator. When you contact your system administrator, use this reference: df8903b3 Any ideas/suggestions?  RIP and replace?  Do not use the unit of management identity bulk? Everything (vCenter, bulk, unit IM bulk, etc.) is on the same subnet and can successfully resolve DNS.

  I ended up re - deploy an instance of the unit costs of bulk and it works as expected.

• Purchase of API

  Deal all,

  I have a requirement to--

  
  

  (a) bulk update certain data IN. (as need Date, promise Date etc.).

  (b) the review auto-incrémentées.

  (c) the automatic approval of the PO.

  Could you please help me with points b and c that way I'm auto-increment the revision IN. after that updates are made and how can I auto approve the PO (the new approver must be identical to the last approver).

  Thank you

  Amit

  Hello Amit,

  You should be able to update existing PO and automatically increase the revision. It is a control of the standard versions of document PO.

  It is by the standard documentation:

  "For the action to update code, the revision number of the document is increased every time

  point the unit price, Description, unit of MEASURE, or the Date of expiry is updated, or when a

  new line is added (unless the archives on approval are chosen in the Types of documents

  window and PO: catalogue of archives on approval is set to no). »

  To approve the update, you can pass LAUNCH_APPROVALS_FLAG = 'Y' for the API.

  The following notes are good examples and details of the API:

  View demo - how to use change IN API for updating existing purchase orders (Doc ID 1078842.1)

  How to use PO_CHANGE_API1_S.update_po to three line (Doc ID 1077455.1) change - look at the last example for lauch_approval_flag

  Kind regards

  Released

• Aspire eRecovery ES1-111 Medium

  Hi, I have an Aspire ES1-111 who had a breakdown of its Members, the recovery partition is slaughtered and the bios has trouble booting from the recovery key. The acer store does no stick eRecovery for ES1-111 and repair-page said that the SNID is not eligible for the service.

  I'm basically left with a brick because there is no legal way to get another copy of 'Make 8.1 with Bing', because it is OEM stuff and I'm obviously not a reseller. Short buying win 8.1 for half price the unit, what can I do?

  Have you checked in with the SNID and the serial number on the appropriate regional site.

  If your computer is under warranty, you can contact Acer German technical support here support German Acer

  You can contact them directly and check the warranty information and send it for repair.

• OE_ORDER_PUB. Process_Order errors when adding a detail if one of the existing detail rows row is updated

  Hello!

  Whenever a sales order line is updated but not yet recorded in the order form, oe_order_pub. Process_Order errors when you try to add on the same command line. It gives the error "line locked out at the treatment of" the first time you run the api then it gives the error "Record is currently underway on by another user, please try to update later" on successful runs.

  When I tried to simulate the same using two forms of sale, an update of one of the lines and do not save more while the other added a line in the same order sale then save, he managed to save the line.

  What I don't understand the API's for it's to stop me if I just add a line, and it has nothing to do if an other lines are updated by another user (and this is only possible on the order form)?

  Is there anyone who has encountered the same? This is the normal behavior of the api or I missed something? No work around?

  Thank you.

  This problem is solved.

  The solution to the problem is that the value to calculate price flag must be set to 'Freeze the price' If you do not want Process_Order to update the price of unit sales of existing lines SB. Based on my observation and technically speaking, Process_Order updates price of all the existing lines of unit sales (and probably other columns) linked to the price based on the price of the object's current price list if the indicator price calculated is 'Calculate price' (I have not tried but in "Partial award"). If other users happen to edit one of these lines of l.o. and has not saved, the update fails and this is the reason for my problem.

  Thank you.

• Custom script in RPO making empty columns in the line items during the training.

  Hello friends,

  its URGENT! need help.

  We have a requirement of the company in the case of the currency 'EUR', it should delete the dot (.) and replace the comma (,) with dot (.) and other currencies it must remove the comma from columns, quantity, price per unit and Total.

  For example:

  For "EUR" 2.123,00 and it must convert it to 2123.00 and 2.123 must convert 2123.

  "USD" 2.123,00 to convert to 2.12300 and 2 123 to convert to 2123.

  This requirement, we wrote a custom script User Exit (UserExitLineItemValidate) function and call that function in line item validation.

  but after having formed the invoices for currency 'EUR' by supervised and learning check (SLV), it removes the values in the column quantity, unit price and Total.

  and if we remove the script, train and then reapply custom script it works but not always.

  My Script:

  Public Sub UserExitLineItemsValidate (pWorkdoc As SCBCdrPROJLib.SCBCdrWorkdoc, pValid As Boolean)

  ' User exit is called at the end of the Document_Validate on the class "bills".

  Dim strQuantity As String

  Dim strUnitPrice As String

  Dim strTotal As String

  Dim lngRow As Long

  Dim pTable As SCBCdrTable

  Set pTable = pWorkdoc.Fields ("LineItems"). Table (pWorkdoc.Fields("LineItems"). ActiveTableIndex)

  If fnIsVerifier and pWorkdoc.Fields ("Currency"). Text = "EUR" Then

  For lngRow = 0 To pTable.RowCount - 1

  
  

  strUnitPrice = pTable.CellText ("unit price", lngRow)

  If InStr (strUnitPrice, ".") > 0 and InStr (strUnitPrice, ",") > 0 Then

  strUnitPrice = Replace(strUnitPrice,".","")

  strUnitPrice = Replace(strUnitPrice,",",".")

  pTable.CellText ("unit price", lngRow) = strUnitPrice

  ElseIf InStr (strUnitPrice, ",") > 0 Then

  strUnitPrice = Replace(strUnitPrice,",",".")

  pTable.CellText ("unit price", lngRow) = strUnitPrice

  End If

  strTotal = pTable.CellText ('Total', lngRow)

  If InStr (strTotal, ".") > 0 and InStr (strTotal, ",") > 0 Then

  strTotal = Replace(strTotal,".","")

  strTotal = Replace(strTotal,",",".")

  pTable.CellText ('Total', lngRow) = strTotal

  ElseIf InStr (strTotal, ",") > 0 Then

  strTotal = Replace(strTotal,",",".")

  pTable.CellText ('Total', lngRow) = strTotal

  End If

  strQuantity = pTable.CellText ("quantity", lngRow)

  If InStr (strQuantity, ".") > 0 Then

  strQuantity = Replace(strQuantity,".","")

  End If

  If InStr (strQuantity, ",") > 0 Then

  strQuantity = Replace(strQuantity,",",".")

  End If

  pTable.CellText ("quantity", lngRow) = strQuantity

  Next LngRow

  On the other

  For lngRow = 0 To pTable.RowCount - 1

  strTotal = pTable.CellText ('Total', lngRow)

  If InStr (strTotal, ",") > 0 Then

  strTotal = Replace(strTotal,",","")

  pTable.CellText ('Total', lngRow) = strTotal

  End If

  strUnitPrice = pTable.CellText ("unit price", lngRow)

  If InStr (strUnitPrice, ",") > 0 Then

  strUnitPrice = Replace(strUnitPrice,",","")

  pTable.CellText ("unit price", lngRow) = strUnitPrice

  End If

  Next LngRow

  End If

  End Sub

  At a very high level of control, (and I can't currently that take a long time to respond)

  • You do this on EVERY invoice, and not only those that you are sub classification (which means "documents that you are training").  Is your intention to assign all invoices or only those formed?
  • In your code, you have the test as shown condition "If fnIsVerifier and pWorkdoc.Fields("Currency").» Text = "EUR" Then".»  You are in essence saying the system ONLY evaluate this condition if the system determines if the application Verifier is running.  What is the desired effect?  Otherwise if the auditor is never used on this document, and the table of line items is never changed, this code would never trigger.

• JavaScript code

  Hello

  I was wondering if someone could help me. I have a PDF form with editable fields. I need a few javacode calculate some values.

  The table has the following columns.

  QTY - SIZE - SINGLE - LINE TOTAL

  1 - the UNIT PRICE will be the VALUE of EXPORTS from the SIZE drop-down list box.

  2nd - LINE TOTAL will be the product of the quantity * PRICE per UNIT.

  In both cases if the value is 0, I blank. So basically only show the value if the number is greater than 0.

  Any help is appreciated.

  See you soon

  Peter

  For the PRICE UNIT field, use the custom calculation script:

  var v = Number(this.getField("SIZE").value);
  if (v==0) event.value = "";
  else event.value = v;
  

  For the TOTAL field of the SECTOR to use this calculation script custom:

  var qty = Number(this.getField("QTY").value);
  var price = Number(this.getField("UNIT PRICE").value);
  var v = qty * price;
  if (v==0) event.value = "";
  else event.value = v;
  

• Result

  Hello
  What follows are the correct result. Kindly let me know.
  
  1. total = Sum (Qty * price per unit)
  
  2. total = Sum (Qty) * sum (unit price)
  
  3. total = Sum (Qty) * unit price

  934618 wrote:
  Hello
  What follows are the correct result. Kindly let me know.

  1. total = Sum (Qty * price per unit)

  2. total = Sum (Qty) * sum (unit price)

  3. total = Sum (Qty) * unit price

  Hmm, it's towards the properties of multiplication.

  Two is never good.

  If the unit price is the same for all the individual elements, then 1 and 3 are the same.

  If the unit price of the individual items are different, then only 1 right and 3 becomes bad.

  And if you just do a simple experiment, you might understand it yourself. In the more general scenario (when all the characteristics of the item type, quantity and cost of the item are different, we have:)

  EXAMPLE:
  Question Type 1: 2 parts in stock, will cost $2 each.

  Point 2: 3 items of Type, cost $4 each.

  Use method 1

  Sum (quantity * unit price) = (2 X $2) + (3 X $4) = $16 CORRECT!

  Using method 2

  Sum (Qty) = 5 X amount (unit price) = $6-online $30 HURT!

  Using method 3

  Sum (Qty) = 5 X unit price =? (What is the unit price as there are two? Cannot be calculated) WRONG!

  So the answer to your question is that if you want to cover all cases, the answer is #1.

• Content visibility problem JavaFX TableView.

  Hello!
  I wrote a simple code to display the table with "data". There are also some TextFields and add the touch that takes the text of TextFields and adds it to the Table in a new line.
  I have this problem that the table is correctly adding new lines, but it does not show its contents (the boxes are empty) and I have no idea where the problem is. Can anyone help?
  Thanks in advance,
  Filip
  

  package javafxtable;
  
  import javafx.application.Application;
  import javafx.beans.property.SimpleDoubleProperty;
  import javafx.beans.property.SimpleIntegerProperty;
  import javafx.beans.property.SimpleStringProperty;
  import javafx.collections.FXCollections;
  import javafx.collections.ObservableList;
  import javafx.event.Event;
  import javafx.event.EventHandler;
  import javafx.geometry.Insets;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.*;
  import javafx.scene.control.cell.PropertyValueFactory;
  import javafx.scene.layout.GridPane;
  import javafx.scene.layout.HBox;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  /**
   *
   * @author Filip Kania
   * [email protected]
   */
  
  public class JavaFXTable extends Application {
   
          public class Product{
  // creating fields for the Product class
          //ID integer
          private SimpleIntegerProperty id;
          //name String
          private SimpleStringProperty name;
          //quantity Integer
          private SimpleIntegerProperty quantity;
          //price per unit Double
          private SimpleDoubleProperty unitPrice;
          //summary price double
          private SimpleDoubleProperty sumPrice;
          
          public Product(int id2, String name2, int quantity2, double unitPrice2){
              this.id = new SimpleIntegerProperty(id2);
              this.name = new SimpleStringProperty(name2);
              this.quantity = new SimpleIntegerProperty(quantity2);
              this.unitPrice = new SimpleDoubleProperty(unitPrice2);
              this.sumPrice = new SimpleDoubleProperty(quantity2*unitPrice2);
          }
          //Getters and setters for the Product
          private String getName(){
              return name.get();
          }
          private int getID(){
              return id.get();
          }
          private int getQuantity(){
              return quantity.get();
          }
          private double getSumPrice(){
              return sumPrice.get();
          }
          private double getUnitPrice(){
              return unitPrice.get();
          }
          private void setName(String name){
              this.name.set(name);
          }
          private void setQuantity(int quantity){
              this.quantity.set(quantity);
          }
      }
   
   //fields for the JavaFXTable class
      private TableView<Product> table  = new TableView<Product>();
      private final ObservableList<Product> data = FXCollections.observableArrayList(
              new Product((int)1,"Sample1",(int)5,(double)19.99),
              new Product((int)2,"Sample2",(int)3,(double)75.99),
              new Product((int)3,"Sample3",(int)12,(double)3.49)
          );
      private TextField idT, nameT, quantityT, priceT;
            
          
      @Override
      public void start(Stage stage) {
          //title of main frame
          stage.setTitle("JavaFX TableView");
          //size of main frame
          stage.setWidth(750);
          stage.setHeight(430);
          
          //main group for the stage
          Group root = new Group();
          
          //main scene for the main group
          Scene scene = new Scene(root,Color.SILVER);
          
          //creating ID column and setting preffered width
          TableColumn id = new TableColumn("ID: ");
          id.setPrefWidth(50);
          id.setCellValueFactory(new PropertyValueFactory<Product,String>("id"));
          
          //creating name column and setting preffered width
          TableColumn name = new TableColumn("Name: ");
          name.setPrefWidth(150);
          name.setCellValueFactory(new PropertyValueFactory<Product,String>("name"));
          
          //creating all other columns with default width
          TableColumn quantity = new TableColumn("Quantity: ");
          quantity.setCellValueFactory(new PropertyValueFactory<Product,String>("quantity"));
          //mother column for prices
          TableColumn price = new TableColumn("Price");
          //unit price cooooolumn
          TableColumn unitPrice = new TableColumn("Per unit: ");
          unitPrice.setCellValueFactory(new PropertyValueFactory<Product,String>("unitPrice"));
          //summary price column
          TableColumn sumPrice = new TableColumn("Summary: ");
          sumPrice.setCellValueFactory(new PropertyValueFactory<Product,String>("sumPrice"));
          
          //adding unit and sum columns to price column
          price.getColumns().addAll(unitPrice, sumPrice);
          
          //setting preffered table size to the stage size
          table.setPrefSize(stage.getWidth()-250, stage.getHeight()-80);
           
          //TextFields for input data to table
          nameT = new TextField();
          nameT.setPrefWidth(80);
          quantityT = new TextField();
          quantityT.setPrefWidth(80);
          priceT = new TextField();
          priceT.setPrefWidth(80);
          idT = new TextField();
          idT.setPrefWidth(80);
          
          //GridPane for the TextFields to keep them nicely
          GridPane inputPane = new GridPane();
          inputPane.setHgap(10);
          inputPane.setVgap(10);
          inputPane.setPadding(new Insets(0,0,0,10));
          
          //putting TextFields and labels into GridPane
          inputPane.add((new Label("Name: ")),1,1);
          inputPane.add(nameT, 3,1);
          inputPane.add((new Label("ID: ")),1,2);
          inputPane.add(idT,3,2);
          inputPane.add((new Label("Price: ")),1, 3);
          inputPane.add(priceT,3,3);
          inputPane.add((new Label("Quantity: ")),1,4);
          inputPane.add(quantityT,3,4);
          
          //Creating button for adding data from textFields into table
          Button addBut = new Button("  Add  ");
          //EventHandler for button, while mouse clicked on it
          addBut.setOnMouseClicked(new EventHandler(){
              @Override
              public void handle(Event e){
                  try{
                  data.add(new Product(Integer.parseInt(idT.getText()),nameT.getText(),
                         Integer.parseInt(quantityT.getText()), Double.parseDouble(priceT.getText())));
                  }
                  catch(Exception ex){
                      System.out.println("Empty fields or illegal arguments passed.");
                  }
              }
          });
          
          //adding button to GridPane
          inputPane.add(addBut, 1,6);
   
         //adding items to table
         table.setItems(data);
         
         //adding all columns to the tableView
          table.getColumns().addAll(id, name, quantity, price);       
          //crating VBox for whole thing
          HBox hBox = new HBox();
          hBox.setPadding(new Insets(10,10,10,10));
          hBox.getChildren().addAll(table, inputPane);
          
          //adding table to the main group
          root.getChildren().add(hBox);
                 
          //setting scene as a stage Scene
          stage.setScene(scene);
          //showing the stage
          stage.show();
      }
      //launching
      public static void main(String[] args) {
          launch(args);
      }
  }

  Hello. The code below works. Check your property of product class definition.

  import javafx.application.Application;
  import javafx.beans.property.SimpleDoubleProperty;
  import javafx.beans.property.SimpleIntegerProperty;
  import javafx.beans.property.SimpleStringProperty;
  import javafx.collections.FXCollections;
  import javafx.collections.ObservableList;
  import javafx.event.ActionEvent;
  import javafx.event.Event;
  import javafx.event.EventHandler;
  import javafx.geometry.Insets;
  import javafx.scene.Group;
  import javafx.scene.Scene;
  import javafx.scene.control.*;
  import javafx.scene.control.cell.PropertyValueFactory;
  import javafx.scene.layout.GridPane;
  import javafx.scene.layout.HBox;
  import javafx.scene.paint.Color;
  import javafx.stage.Stage;
  /**
   *
   * @author Filip Kania
   * [email protected]
   */
  
  public class JavaFXTable extends Application {
  
       public    class Product{
  // creating fields for the Product class
          //ID integer
          private SimpleIntegerProperty id = new SimpleIntegerProperty() ;
          public SimpleIntegerProperty idProperty() {return id;}
          public void setId(Integer value){id.set(value);}
          public int getID(){return id.get();}
  
          private SimpleStringProperty name = new SimpleStringProperty() ;
          public SimpleStringProperty nameProperty() {return name;}
          public void setName(String value){name.set(value);}
          public String getName(){ return name.get();}
  
          private SimpleIntegerProperty quantity = new SimpleIntegerProperty();
          public SimpleIntegerProperty quantityProperty() {return quantity;}
          public void setQuantity(Integer value){quantity.set(value);}
          public int getQuantity(){return quantity.get();}
  
          //price per unit Double
          private SimpleDoubleProperty unitPrice = new SimpleDoubleProperty();
          public SimpleDoubleProperty unitPriceProperty() {return unitPrice;}
          public void setUnitPrice(Double value){unitPrice.set(value);}
          public Double getUnitPrice(){return unitPrice.get();}
  
          private SimpleDoubleProperty sumPrice = new SimpleDoubleProperty();
          public SimpleDoubleProperty sumPriceProperty() {return sumPrice;}
          public void setSumPrice(Double value){sumPrice.set(value);}
          public Double getSumPrice(){return sumPrice.get();}
  
           public Product(int id2, String name2, int quantity2, double unitPrice2){
              this.id = new SimpleIntegerProperty(id2);
              this.name = new SimpleStringProperty(name2);
              this.quantity = new SimpleIntegerProperty(quantity2);
              this.unitPrice = new SimpleDoubleProperty(unitPrice2);
              this.sumPrice = new SimpleDoubleProperty(quantity2*unitPrice2);
          }
  
      }
  
   //fields for the JavaFXTable class
      private TableView table  = new TableView();
      private final ObservableList data = FXCollections.observableArrayList(
              new Product((int)1,"Sample1",(int)5,(double)19.99),
              new Product((int)2,"Sample2",(int)3,(double)75.99),
              new Product((int)3,"Sample3",(int)12,(double)3.49)
          );
      private TextField idT, nameT, quantityT, priceT;
  
      @Override
      public void start(Stage stage) {
          //title of main frame
          stage.setTitle("JavaFX TableView");
          //size of main frame
          stage.setWidth(750);
          stage.setHeight(430);
  
          //main group for the stage
          Group root = new Group();
  
          //main scene for the main group
          Scene scene = new Scene(root,Color.SILVER);
  
          //creating ID column and setting preffered width
          TableColumn id = new TableColumn("ID: ");
          id.setPrefWidth(50);
          id.setCellValueFactory(new PropertyValueFactory("id"));
  
          //creating name column and setting preffered width
          TableColumn name = new TableColumn("Name: ");
          name.setPrefWidth(150);
          name.setCellValueFactory(new PropertyValueFactory("name"));
  
          //creating all other columns with default width
          TableColumn quantity = new TableColumn("Quantity: ");
          quantity.setCellValueFactory(new PropertyValueFactory("quantity"));
          //mother column for prices
          TableColumn price = new TableColumn("Price");
          //unit price cooooolumn
          TableColumn unitPrice = new TableColumn("Per unit: ");
          unitPrice.setCellValueFactory(new PropertyValueFactory("unitPrice"));
          //summary price column
          TableColumn sumPrice = new TableColumn("Summary: ");
          sumPrice.setCellValueFactory(new PropertyValueFactory("sumPrice"));
  
          //adding unit and sum columns to price column
          price.getColumns().addAll(unitPrice, sumPrice);
  
          //setting preffered table size to the stage size
          table.setPrefSize(stage.getWidth()-250, stage.getHeight()-80);
  
          //TextFields for input data to table
          nameT = new TextField();
          nameT.setPrefWidth(80);
          quantityT = new TextField();
          quantityT.setPrefWidth(80);
          priceT = new TextField();
          priceT.setPrefWidth(80);
          idT = new TextField();
          idT.setPrefWidth(80);
  
          //GridPane for the TextFields to keep them nicely
          GridPane inputPane = new GridPane();
          inputPane.setHgap(10);
          inputPane.setVgap(10);
          inputPane.setPadding(new Insets(0,0,0,10));
  
          //putting TextFields and labels into GridPane
          inputPane.add((new Label("Name: ")),1,1);
          inputPane.add(nameT, 3,1);
          inputPane.add((new Label("ID: ")),1,2);
          inputPane.add(idT,3,2);
          inputPane.add((new Label("Price: ")),1, 3);
          inputPane.add(priceT,3,3);
          inputPane.add((new Label("Quantity: ")),1,4);
          inputPane.add(quantityT,3,4);
  
          //Creating button for adding data from textFields into table
          Button addBut = new Button("  Add  ");
          //EventHandler for button, while mouse clicked on it
          addBut.setOnMouseClicked(new EventHandler(){
              @Override
              public void handle(Event e){
                  try{
                  data.add(new Product(Integer.parseInt(idT.getText()),nameT.getText(),
                         Integer.parseInt(quantityT.getText()), Double.parseDouble(priceT.getText())));
                  }
                  catch(Exception ex){
                      System.out.println("Empty fields or illegal arguments passed.");
                  }
              }
          });
  
          //adding button to GridPane
          inputPane.add(addBut, 1,6);
  
         //adding items to table
         table.setItems(data);
  
         //adding all columns to the tableView
          table.getColumns().addAll(id, name, quantity, price);
          //crating VBox for whole thing
          HBox hBox = new HBox();
          hBox.setPadding(new Insets(10,10,10,10));
          hBox.getChildren().addAll(table, inputPane);
  
          //adding table to the main group
          root.getChildren().add(hBox);
  
          //setting scene as a stage Scene
          stage.setScene(scene);
          //showing the stage
          stage.show();
      }
      //launching
      public static void main(String[] args) {
          launch(args);
      }
  }
  

• How the auto fill contents table

  Guy from hell,

  I am creating this table which will automatically fill in the description of the object and get the price after you enter the item code in the fist column. I used the 'purchase model' samples to achieve this. The way they did was create array variable and then pulling the data. It works fine with me, but the question is when I try to write my "2500" lines of code. In my view, there is a restriction on the total lines allowed. I've pasted below a copy of the code that I use. I have not changed anything in the design, with the exception of the number of items (the code below works fine)

  Root.Main #variables [0]. .partNoScript - (JavaScript, client)

  This script object control the interaction between the number of piece, description and unit price fields.

  When you complete the partDesc and partPrice, tables of partNo, ensure that they have the same number of array indices in

  each table for each part number, there should be a corresponding description and price.

  Table of part numbers.

  var partNo = new Array("",)

  "27001");

  An array of descriptions of the part.

  var partDesc = new Array (null,

  'MR. SHORING BEAM 4');

  Table of prices for the part.

  var partPrice = new Array (null,

  113.44);

  Fill the drop-down list part number.

  function populatePartNo (dropdownField)

  {

  var i;

  for (i = 0; i < partNo.length; i ++)

  dropdownField.addItem (partNo [i]);

  }

  Fill in the fields description and price unit.

  getDesc (partNumber, descField, itemPrice) function

  {

  var i;

  for (i = 0; I < partNo.length; i ++) / / Go through the complete list of part numbers to find the one that is currently selected.

  {

  If (partNo [i] == partNumber) / / where to find us the part number currently selected.

  {

  descField.rawValue = partDesc [i];          Enter a description in the description field

  itemPrice.rawValue = partPrice [i];          and the unit price in the price field unit.

  break;                                                                                No need to go further if there is a football game.

  }

  }

  }

  

  Thanks in advance

  Just a quick note about your script, it fails because it is not valid javascript. In one of the tables, you have the following errors

  ...

  "Hairpin multifaceted 'R' safety."

  ...

  #NAME?

  ...

  Here is the syntax invalid js. What causes the entire to be corrupted script block and function is not found

  Note to use nested quotes ("")

  "Multifaceted \"R\' security hairpin. "

  Once those have been fixed your code works correctly. Use the check Syntax button to highlight the problems of js.

• How to hide one calculated field if zero

  Hello.

  I am working on a form of column 5. I'm utilitzing the option product (X) to automatically calculate the price per unit quantity X

  Most of the time I'm only using a couple of lines.

  I want to keep the calcualations, but I don't want a ZERO to display when I print.

  Is this possible? I don't know javascript and anyone who can tell me how and possibly provide the solution, would be greatly appreciated.

  Thank you

  You can use the validation script custom following in the result field:

  If (event.value == 0) event.value = "";

  You will need to refresh, recalculate, or clear the form to get the code to be triggered.

• the declaration of the type of this expression is ill-formed incompleteor

  error 320 to the column of the row 22 14
  the declaration of the type of this expression is ill-formed incompleteor
  error on line 22, column 4 0
  Declaration ignored
  

  DECLARE
       v_value VARCHAR2(50);
       v_prod_id varchar2(100);
       v_prod_name VARCHAR2(100);
  BEGIN
       v_value:=:product.SIZE_LONG;
       v_prod_id:=:product.prod_id;
       v_prod_name:=:product.prod_name;
       IF v_value is not null then 
       insert into product (prod_id,prod_name,DRESS_COMPOSITION,WASH_LABEL_INSTRUCTION,PRESSING_CHARGE,DYEING_CHARGE,
       EXTRA_CHARGE,FINISHING_CHARGE,ITEM_TYPE,TOTAL_FOB,SEASON_YEAR,INTERSTAT_CODE,RETAIL_EURO,WHOLESALE_EURO,
       RETAIL_USD,WHOLESALE_USD,RETAIL_GBP,WHOLESALE_GBP,CATEGORY)
       values (v_prod_id||'-L',v_prod_name||'-Long',:product.DRESS_COMPOSITION,:product.WASH_LABEL_INSTRUCTION,
       :product.PRESSING_CHARGE,:product.DYEING_CHARGE,:product.EXTRA_CHARGE,:product.FINISHING_CHARGE,:product.ITEM_TYPE,
       :product.TOTAL_FOB,:product.SEASON_YEAR,:product.INTERSTAT_CODE,:product.RETAIL_EURO,
       :product.WHOLESALE_EURO,:product.RETAIL_USD,
       :product.WHOLESALE_USD,:product.RETAIL_GBP,:product.WHOLESALE_GBP,:product.CATEGORY);
       LOOP
            insert into product_detail1(prod_id,item_code,item_name,qty,price,unit,avg_rate) 
            values (:product_detail1.prod_id,:product_detail1.item_code,:product_detail1.item_name,
            :product_detail1.qty,:product_detail1.price,:product_detail1.unit,:product_detail1.avg_rate);
                 exit when NO_DATA_FOUND;
            NEXT_RECORD;
       END LOOP;
  elsif
       v_value is  null then 
       delete from product where prod_id=(v_prod_id||'-L');
  end if;
  END;

  Please Guide
  
  Why this errro comes
  
  Thanks and greetings
  Vikas Singhal

  I don't know why not use is not the same as I showed. The error is coming because the closer you get the lower case letter in the condition. Before apply the code, you first need to examine carefully.

  Change This.  exit when :system.last_record = 'true';to  exit when :system.last_record = 'TRUE';
  

  Don't forget to use VALIDATION after END of LOOP

  After that he will even record to another record, the only change is prod_code
  LARGE, SMALL or SHORT etc.

  But you said before that the product size = LONG then you want to insert the record. And now, for all sizes. In any case, if yes, then remove the IF condition.

  -Clément

• Lines show several times on State invoice

  Hello
  If terms of payment are payments then lines show several times on the invoice report.
  
  Assume that the payment terms are 10 installments (price point, Description, quantity, price per unit and Extended) lines appear 10 times. But I need display time line data only (article, Description, quantity, unit price and extended).
  
  Please help me to achieve this goal.
  
  Thank you
  Subbarao.

  have you tried to check the number of payment to one?

  Display lines only if the slice number is 1.

  print

  --
  Pradeep