primary and DR server OS version may be different

Similar Questions

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• Primary and the day before version

  HII All
  the primaries with the version is 11.2.0.1 and Eve and 11.2.0.3 are working together successfully?
  
  Best regards

  Mahir statement applicable only for logical expectation , where mixed versions are supported with the compatible settings.

  Yes, there is writing:

  The COMPATIBLE database initialization parameter must be on the same value on all of the databases in a Data Guard configuration.
  unless you use a logical standby database, which can have a COMPATIBLE setting higher than the primary database.

  Why liked COMPATIBLE? IF you use the old version, and then apply SQL can not supports new features in the new version.

  Hmm, I mentioed mixed versions support compatible parameters, this does not mean that compaitblity version should be higher logical pending.
  We can have a more recent version of logical database with the same compatibility standbyd, as you may need it can work with 11.2.0.0.0 although if you use 11.2.0.3.0

  On seraching found the RDBMS COMPATIBLE parameter values must remain the same between primary and physical backup systems in detail you can check * 1265700.1*

• A primary and backup/replica ACS server may be on different versions?

  Hello

  (2) ACS' (for example: a common unit 1120 5.x version and a version of runnig quanta 1113 4.x) 1 primary possible version 5.x with a replica version 4.x?  If not, what are the requirements between implementation of a primary and backup/replica for devices?

  Thank you

  James

  Hello

  No, you can not made the two device replication you talked,

  The only requirement is that the devices are exactly same version and patach construction so that the replication working.

  Thank you

  Waris Hussain.

• Where is the best place to find information on the new version of product releases for Windows, Internet Explorer and SQL Server?

  Hi, we would like to ensure that we are aware and actively involved in the preparation and planning in support of our product lines using the newest and the most innovative platforms and those whose primary Microsoft - Windows, Internet Explorer and SQL Server products and would like to find the best and most reliable way to receive alerts about new products , version beta and official release information notification automatically either by subscription or other alert.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  I installed AVG 9.0 and now I get the MSN Explorer pop next message.
  You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  Sure.  Analysis of your e-mail anti-virus program:

  • Can slow to receive and send messages, or even fail.
  • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
  • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

  Here are a few web pages accurately:

  Why you don't need your anti-virus program to scan your e-mail
  The other threat email: the Corruption of files in Outlook Express
  Why some antivirus software can change the settings in e-mail programs
  Email scanning - advantages and disadvantages

• I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade to the latest version and start using the universal or complex theme?

  I have a server/database running Application Express 4.1.1 and a server/database active Application Express 4.2.0. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Hi DJake,

  DJake wrote:

  I have a server/database Application Express 4.1.1 running and a server/database Application Express 4.2.0 running. Is it risky to try to upgrade them both to the latest version and start using the universal or complex theme?  Is how easy it to do? Recommended?

  The servers are windows 2008 r2. Don't know if it matters.

  I'm not exactly an expert at the express request...

  Please read the documentation of the requirement for Oracle APEX 5. Ensure that your environment meets these requirements. Upgrade your oracle database or other software if necessary components and then you can go right 4.1/4.2 to 5.0 update according to the above-discussed upgrade strategies in the above discussions.

  Reference: https://docs.oracle.com/cd/E59726_01/install.50/e39144/pre_require.htm#HTMIG376

  You should go for upgrade of the Oracle APEX of 4.1 to 5.x. Regression test your applications to remove if any errors introduced by upgrade. The kickoff of a new project to migrate your applications to universal theme.

  Reference:

  • Re: upgrading to 5.0 - best practices
  • Re: APEX late upgrade
  • https://www.YouTube.com/watch?v=o8S4bg4Vo0A

  Kind regards

  Kiran

• I can't get Photoshop and Lightroom to download keep may not find the secure server?

  I can't get Photoshop and Lightroom to download keep may not find the secure server?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

• Primary/secondary RADIUS server

  Hey all,.

  I tried to find out for awhile how primary and secondary RADIUS servers work about WLC 4400 s. If the primary RADIUS server goes down, and the secondary image is used, when the controller will return to the primary once it is up? He waits until the secondary breaks down, or done immediately switch back to the primary when it becomes available?

  Thanks in advance!

  The f

  On versions 4.2 and earlier, if the principal fails, then the secondary image is used until the secondary level is not available. So if you want the main for the radius server to use purpose, restart the secondary image. Then the tertiary then back to the primary. 5.0 has a feature in which you can define a Dungeon alive so that when the primary comes back upward, the primary will be used again. 5.0 code not a version of good code, however.

• change ip address of the database servers primary and standby

  Hello.

  I have an oracle server primary and backup (version 11.2.0.4) on windows 8 profesional.

  They work well until today.

  Today, I had to change my ip address on both servers.

  After that I changed the ip address of the OS, I changed the ip address in tnsnames.ora and listener.ora files only.

  A moment that everything worked well. But now the archivelog files not copy to the standby server.

  Is there a place where I have to change ip or the settings on the database?

  Please, I hope you can help me.

  Best regards

  Hello

  After that I changed the ip address of the OS, I changed the ip address in tnsnames.ora and listener.ora files only.

  A moment that everything worked well. But now the archivelog files not copy to the standby server.

  1. If it worked for a while after the change of ip address

  3. make sure your journal alerts, what it says? information about the error?

  2. first thing ipadress sequenced in tnsnames.ora and listener.ora on primary and standby

  3. check ping to the host-level work and tnpsing is reached or not. If both are working check listeners are up or not and they are able to identify the services of db, registered or not.

  4. now, connect as sysdba password on the servers file

  5 check v$ achive_Dest_status for valid or relevant destination which is assistance for the transfer of the archives of primary Eve (the error column)

  -Not especially to knew what the problem is, you should get the controls.

  -Pavan Kumar N

• 32-bit primary and standby 64bits

  OS: Windows

  DB: 11 GR 2

  Hi all

  I'm planing to create a database waiting for one of my production database, but the problem is that I have my database of prod on 32-bit and I was wondering if can create a database server makes for 64 bit.

  I need to know, if it works, I guess not. Just need your valuable contributions.

  Kind regards

  Sphinx

  Hello

  Q: the above mentioned are the points that I could find, I need to know if we can be the difference in bits of Oracle software, I mean, software primary oracle 32-bit and 64-bit software before oracle can they exist together?

  A: If this physical sleep 'NO' both have same bit.  If this logic ensures no problem they may be different.

  Kind regards

  Sphinx

  Thank you

• No menu or the toolbar at the top of the page, try screw up firefox and download the new version, still no menu or toolbar

  I have google as my default homepage on my Mac. This morning when I opened Firefox Google home page fills the entire page, there is no menu or toolbar at the top of the page. I tried to click on F11 but it fills just the search bar with an f. I tried right clicking and clicking on 'ESC' but which does nothing. I tried to screw up my version of Firefox and download a new version, but when I opened it, it opened to the Google home page and there's still once a menu or toolbar. I did not restart my computer once I downloaded the new version of Firefox. I'll try that right now.

  On Mac, command + shift + f should also switch between normal view and full screen.

  Another method that may work is to drag the pointer of the mouse completely to the top of the screen. If the tab slides to the bottom bar, you can right click (Ctrl + click?) an empty area of the top (or right click on the button '+') and you should get a context menu runs with the option for Mode full-screen output.

  Does it work?

• I and issue with the version of 29.01, seems I have installed two, a Favorites appears, the other not. I can both uninstall and reinstall with bookmark?

  Somehow, it seems that I have two versions of 29.01installed. One is the American version and the other British version. One that has all my favorites and viewable history, but there is no visible address/firefox browser toolbar. The other version has none of the bookmarks, and using the profile search product not available, but this version has no visible address/firefox browser toolbar.
  Can I uninstall both versions and then download and reinstall a new version and at the same time find all my favorites and the browser history?

  Make sure that you do not delete personal data when you uninstall Firefox because that will remove all Firefox profile folders.

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/KB/backing+up+your+information
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• I have the same problem - a code error 80070643. Can anyone help. I use Windows 7 and Microsoft 2010 (trial version)

  Can anyone help. I use Windows 7 and Microsoft 2010 (trial version).

  Hi DonDonaldo,

  1. what windows update did you install?

  2. When was the last time you were able to install updates?

  3. do you have security software installed on the computer?

  Windows Update error80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You can also encounter this error when installing updates for Microsoft Office 2003.

  If you were installing Microsoft Office 2003 updates when you received the error, follow the instructions in the "Microsoft Office 2003" section below. Otherwise, follow the instructions in the section "Windows.NET Framework".

  The .NET framework is a component of Windows that is used to build, deploy, and run programs and applications. Unfortunately, it may be damaged by some programs, viruses or hard drive problems.

  To automatically repair the .NET Framework

  1. click on this link:repair .NET Framework

  2. in thefile download dialog box, click run, and then follow the steps in the wizard.

  3. open Windows Update by clickingStart , all programsand then clickWindows Update.

  4. in the left pane, clickcheck for updates, and then wait while Windows searches the latest updates for your computer.

  5. If updates are found, clickinstall updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If the previous steps do not solve the problem, you can reinstall .NET Framework manually, but the steps are intended for advanced users. If you are not comfortable performing these steps, ask a friend to help you. You will find the steps in the article toreinstall .NET Framework on the Microsoft Web site.

  Microsoft Office 2003

  To resolve this problem, you may need to restart the Office Source Engine (OSE) service and try again to install the latest updates for Office products.

  To restart the Office Source Engine (OSE) service

  You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking theStart button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click onServices. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If theOffice Source Engine service is disabled, double-click it to open the service properties.

  4. click on the listStartup type , click Automatic (delayed start), and then clickapply.

  5. underService status, click Start.

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

  http://support.Microsoft.com/kb/903772

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How primary and secondary channel IDE Windows XP home supposed to have?

  Original title: IDE

  Primary and secondary IDE channels how is xp family supposed to have?

  The information provided indicates a primary and secondary IDE channel, but I don't know where you got this information from.

  I suggest that you download, install and run the Belarc Advisor:

  Belarc Advisor - free PC Audit staff
   http://www.Belarc.com/free_download.html

  Belarc provide you with lots of information about your system. Once you have run it and you're on the computer profile summary, just underneath the main sections, you should see model system (right hand); just below will be your brand and model that he determined.

  Just below under the first point main Circuit Board 's advice, the model of motherboard.

  With this information visit the support site of the manufacturer of the computer and the search for documentation on your specific model, the manual should contain information about the number of IDE connectors on the motherboard.

  Similarly, you may be able to Google the motherboard model and locate the information you want.

  Kind regards