Satellite Pro U400 - 13 k - can not connect on Vista - SOLUTION

Similar Questions

• Can not connect to Vista - connection failed user profile Service

  System message: user profile Service service has no connection

  User profile cannot be loaded.

  Help, please!

  Thank you very much

  Foam HB

  original message: can not connect to Vista

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro U400 - audio quality is not good

  OK this problem has been plaging me for years. I have a Toshiba Satellite Pro U400 windows 8.1.

  The sound quality is terrible.
  I can remember it's bad in windows 7.

  Contextant driver is bad, and so is the generic driver windows 8.1.

  Help, please

  To be honest, I have no idea what you mean exactly by the quality is terrible.
  I've owned a notebook Satellite U400 happened and I have to say that the sound quality was quite good.

  Satellite U400 is a small portable 13.3 and the speakers have been adjusted to the dimensions of the laptop.
  The Conexant audio chip is part of the motherboard and you will not be able to replace it.

  If you want to use another sound card, you can try to use an external USB audio interface.
  I use this external sound solution for my home recording studio.

  The audio interface is connected to the USB port of the laptop s and the external speakers are initiated for the external audio interface.

  By the way: isn't Satellite U400 is the list of the supported 8.1 notebooks... Win so you won't find not all drivers Win 8.1 for this unit on the Toshiba driver website.

• Satellite Pro U400 Win 7: flashing projector connected to Dynadock U10

  I have a number of Dynadocks U10 and Toshiba Satellite Pro U400 laptops.

  They are used to allow our teachers to move from one room to the other without having to connect and disconnect several cables. We use a vga connection to a projector for the external monitor.
  Everything worked pretty well until we put Win 7 on laptops.

  Now, at random intervals, the external monitor will blink.
  I tried the most up to date drivers and software found elsewhere in these forums.
  If I plug the projector directly into the laptop, the flashing stops.

  Can someone please help avoid losing me my mind completely.

  Thank you.

  > If I plug the projector directly into the laptop, the flashing stops.

  I think it means that the VGA of Dynadock pilot must be upgraded to Win 7 compatible version.
  There is nothing wrong in using a direct connection to the laptop, so I think there must be a problem with the driver Dynadock.

  The latest Dynadock graphics card drivers can be found here:
  http://www.DisplayLink.com/support/downloads.php

• Fingerprinting is on Satellite Pro U400-160 - specified database not found

  Hello

  Well, I recently bought a Toshiba Satellite Pro U400. The first day, I took my fingerprints, and all went well.
  The next day, the software reinstalled himself for some reason any... and lost of my fingerprints.
  So I went back to the software TrueSuite Access manager, but this time I had a problem!

  ' *' Error: specified database could not be found ' n ' exact error message no, something similar.*

  I got this message, so I looked in this forum. I discovered that I could reinstall the software, so I did and got the last update, but it's the same thing.

  I don't know what to do, I just installed Office 2007 since I was the computer, nothing else.

  Help, please!
  Thank you very much

  You take the recovery disc and reinstall the OS using the Toshiba disc.
  The laptop must be set to the factory settings/configuration and then you should check if the same error message again.

• Satellite Pro U400: How to remove folder HDD Recovery Vista running Win 8

  Hello!

  I have updated my Windows Vista to Windows 8 via the Microsoft upgrade offer. Toshiba does not support the upgrade of the Satellite PRO U400 of Win8, but it works so far, only a few features are missing...

  In this HARD drive recovery process, Vista folder remained on my partition E: (containing about 5 GB of files dated 2008...).

  I HAVE (even 2 sets of) recovery DVD for Vista.
  The infrastructure of original HDDRecory for Vista on the laptop ran defective, already long ago for some reason any.

  There is therefore no reason to keep the old HDD Recory on E: folder.
  It is completely unnecessary and I would like to remove this folder without formatting E:.
  However, although I work with admin rights, this is strictly rejected by the system of Windows 8.

  Is there any idea how to get the access rights to delete the HDDRecory folder?

  Best regards and thanks for the help!
  Gernot

  So far I didn't test these actions, but if you have administrative rights, maybe it's possible to delete certain partition and without changing the ability to create a new.
  Try to do this, use the option of disk management in computer management.

  Of course before trying to do this backup all other important data stored on that partition.

  Please let me know if it will work.

• Satellite Pro C660-2JR - wifi is not connecting

  Hello

  I just bought a laptop Satellite Pro C660-2JR for my daughter, the unit works fine on lan cable, but not connecting not wireless.
  Wireless indicator shows an intense tone, but when I click on connect after that 10 seconds, it says connected failed.

  The network settings are correct (I checked with two other computers that connect without problem), the pc is running x 64 win7. on the toshiba site there is no drivers listed for the local network, I downloaded and installed the drivers from realtek realtek Web site, but no difference.
  Is this a problem with x 64?
  I've tried the recovery disks

  Can anyone help?
  Thank you

  Rob

  On this virtual path, it is not easy to say what the problem is, but there must be a problem with the WLAN settings I guess. What else? Your laptop can detect your router. Question is: what router do you have, what WLAN standard do you use, and you have WIFI password or not.

  Have you tried to reboot your router and check again?
  When you unlock your router you have the same problem?

• Satellite Pro U400-SP2804 - Microphone is not listed in the volume control

  Hello
  I can't listen to the microphone from the speaker, because does not appear micro in the Volume control

  On the start menu< control="" panel="">< audio="" devices="">< advanced="" properties="">< volume="" control="">< properties="">

  Mixing: Conexant HD Audio output

  Volume controls:
  Volume control
  Wave
  SW
  CD

  But n - t apeear option microphone or line

  My sound card is Conexant High Definition SmartAudio 221

  I was reading, and I think the problem is: it doesn't have a key in the windows registry value, someone help me, thanks

  I did: reinstall the driver, uninstall the driver and put another card sound, change the operating system, works wth 2 sound cards, portable computer, import registry values from the other laptop. but does not solve the problem.

  My problem appears with Winodws XP 2002 SP3 and Windows Vista professional

  Hello

  The port microphone or line is not because you are looking for this audio * output parameters.
  The microphone is a device of entry so it s not who listed there.

  If you go into the volume settings > options > properties you can switch to HD Audio input.
  Now you can change the volume of the microphone! :)

  Good bye

• I can not connect computer vista laptop to my network home, but I can connect to other networks. Other computers can connect to my home network very well. This can be corrected?

  My laptop runs Vista and I've not had problems connecting to my home network wireless until a week ago or not.  Then, trying to connect, I see other available networks, but not my own.  When I try to connect manually, it says that the network already exists.  Other computers, macbooks, are able to connect to my home network without problem.  I am able to connect to a network on my laptop fine unsecured wireless.

  I could 'solve' the problem or get reconnected with a restoration of the system to an earlier date, but it only lasts a day or two.  I searched for another fix and tried many things, including to reset the router, remove my network, and then reinstall, etc, but can't seem to get this to work as if it were - automatic connection as the first network.

  Any help would be appreciated.  Thank you.

  You have rebooted the router and the pc at the same time?

  You run the IPCONFIG / all from a cmd prompt can and download a preview of the output to a file share services like rapidshare and put a link to it in your next post?

• Satellite Pro U400-18 s faulty motherboard

  My friend Satellite Pro U400-18 s will not start.
  Pass the initial Toshiba screen, I had to check it out for the PC tech guy, and they could not get pass this screen as well. However, they confirmed that the hard drive has been authorized. They suggest that the motherboard is broken?
  Can anyone help? And where can I get a replacement from? I have no recovery disks, like most of the GUY's, I have not read the instructions.

  Any help would be really appreciated

  Who are these guys from tech PC? Maybe Toshiba service provider?

  To get the new motherboard will be problematic, so I recommend you contact the nearest authorized Toshiba and ask for help. They can order the new Board of Directors for you.

• Satellite Pro U400 VISTA disk management has 6 primary partitions

  Hi all!

  I have a strange effect on my Toshiba laptop Satellite Pro U400 (but it seems not to be specific to this one that I saw the same symptoms elsewhere, at the same time):

  I had the laptop with a 320 GB drive with recovery-(invisible / "Configuration EISA", 1,46 Go) system (C:, ~ 150 GB) and data (E:, ~ 150 GB) volumes. It's the usual structure of Toshiba,

  pre-installed OS was Vista professional.

  As I plan to install Linux in addition, I have done as a result of preparations:

  Recovery disc Vista created 1.).
  2.) C: shrunk to ~ 100 GB using Vista disk management tool.
  3.) E: shrunk to Go ~ 98 using Vista disk management tool.
  It is suggested that 4.) E: directly behind C: using Parted Magic CD.

  Finally I got a 97 GB of free space at the end of the disc, and everything worked well away. Creating an additional on the free area, Vista disk management, resulted in an extended partition created by Vista. This extended partition contained the extra volume as well as the free space remaining behind.

  To prepare for installing Linux, I've finally created three logical Volumes inside the extended partition with Vista disk management tool.
  After that, I had the following structure of the partition on the disk (indicated by the Vista Disk Manager):

  invisible 1.46 GB, primary
  C:, ~ 100 GB NTFS, primary, active, System
  E:, ~ 98 GB NTFS, primary, data

  ~ 97 GB extended partition, containing:
  2 GB unformatted (planned for Linux swap)
  20 GB unformatted (planned for Linux root "/")
  21 GB unformatted (planned for Linux "/ home")
  Empty remaining 54 GB space

  More on Vista worked properly!

  Recently, I installed OpenSuse 11.1 using the volumes placed within extended partitions (user-specific configuration). The Installation worked correctly. Logical volumes have been formatted to

  2 GB of swap (swap Linux, / dev/sda5)
  20 GB ext3 (Linux root ' / ' on/dev/sda6)
  21 GB unformatted (Linux "/ home" on/dev/sda6)

  during the installation of Linux. Linux and Vista up and running with their scores. If I look at the hard drive with Linux' partitioning tool, I see three main partitions + range, as expected. The scope contains the Linux partitions + empty disk space.

  HOWEVER:
  ========

  If I look at the hard drive with the Vista disk management tool now, I get the following image:

  invisible 1.46 GB, primary
  C:, ~ 100 GB NTFS, primary, active, System
  E:, ~ 98 GB NTFS, primary, data
  2 GB PRIMARY, no format info displayed
  20 GB PRIMARY, no format info displayed
  21 GB PRIMARY, no format info displayed
  Empty remaining 54 GB space

  This means:
  VISTA DISK MANAGMENT ME PRESENT 6 PRIMARY PARTITIONS WITHOUT ANY COMPLAIN
  Although a hard drive on the PC architecture usually only supports maximum 4 primary partitions.

  Issues related to the:

  Have you ever seen a similar behavior?

  Is this a bug of presentation in the Vista disk management tool?

  Or is it a bug in formatting under Linux?

  Is there a solution for this problem?

  At present, the two BONES work very well. However, the disk will be get permanently damaged as soon as I try to create more partitions in the empty space left?

  Sincere greetings and thanks for your comments.

  Girard

  > Have you ever see similar behavior?
  NO.

  > Is this a bug of presentation in the Vista disk management tool?
  I doubt that it is a bug, I think you forgot something.

  As far as I know you can create 4 partitions on the HARD drive and this is the reason why you have the ability to create an extended partition.
  An extended partition can be divided into several logical drives.

  That is why it s wise to create a primary partition for Windows OS for example and an extended partition, which can decompose the in logical drives (partitions) different.

  However, I put t see a problem if everything works properly

  Welcome them

• Satellite Pro U400 - 12 p: Vista 64 bit audio driver has no - no microphone

  I have the Satellite Pro U400 - 12 p.
  I installed the Vista 64 bit, because I upgraded the ram to 4 GB.
  Now, Conexant driver does not work.
  Just as it should, even tried downloaded the 32-bit Version.
  None.

  It shows that it can be upgraded, then 'install' file, and at the end, it shows "Failure."
  The cause of it, it shows that I have no audio output installed. = speakrs do not work and the MIC of course.

  Only when I remove the driver in Device Manager and restart the machine, it becomes thin.

  So, what's the problem?
  * The problem is the Microphone does not work! How can I make it work? *

  Please, help me, I am a student, and it takes a lot for studies.

  Thank you much for the help.
  NIR.
  .

  Hello

  It is not easy to say why this is happening.

  Maybe the facilities is order wrong. I send you the facilities for U400 command.
  Try please install all the drivers, tools and utilities following this order of installations.

  Windows Vista SP1
  KB941833
  KB941833
  Module of Chipset Intel (r)
  Intel (r), Robson (iMSM Driver of Intel)
  Intel Crestline-GM / UMA Drive
  or
  AMD M82XT /M86 driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Alps Touch Pad Driver
  Conexant Modem driver
  Modem region Select utility
  Driver Intel LAN wireless Golan/Kedron
  Intel Proset utility
  Atheros Wireless LAN driver
  Realtek RTL8187B Wireless LAN Driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  CIR Port driver
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA SD Memory utilities
  AuthenTec AES1610 fingerprint utility
  TOSHIBA ConfigFree
  TOSHIBA WPS library
  TOSHIBA Assist
  TOSHIBA Speech System
  TOSHIBA Extended Tiles for Windows Mobility Center
  TOSHIBA Remote Control Manager
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA face recognition
  TOSHIBA TRS driver
  HDMI Control Manager

  Please post the result.

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• Satellite Pro U400 - network connection lost after suspend

  I have a Toshiba Dynadock. My network is connect directly in dynadock.

  When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

  What is the problem?
  Dynadock software version is 2.0

  Hello

  I see that you have switched from Vista to XP.

  First of all I recommend you update the BIOS.
  As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

  You will need to upgrade Win XP to the last State.
  The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

  Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
  You can find this option in the properties-> tab power management

• Satellite Pro U400-11V - Sharp noise when starting with connected screen

  Hello

  We received 5 x computers laptops Satellite Pro U400-11V, are excellent, with one exception:

  When you start (it happens on all of them) with a screen VGA monitor plugged in, a high beep is played from what looks like the speaker system. It occurs just before the first splash screen windows.

  Once the windows login screen is displayed a monitor can be connected to any problem & works very well.

  What can I check? I have had a look but do not find all the tracks so far, where this post.

  Thank you
  -A

  Perhaps you are meaning that the beep POST (Power on self test)?

  The laptop still sounds if the POST has been successfully passed.

  Parts of the motherboard will be verified during POST, and if everything is ok, a beep is displayed.

  If something would be a mistake, the laptop will not start and different beeps would appear.

  Welcome them