Print a string to the screen without using textfield

Hello

I want to print 100 channels on the screen, each chain contains one or two characters.

There is no equivalent drawText. Is to create 100 textfield intensive resouce.

Is there a solution?

Perhaps this message on the conversion of bitmap of the text images will help you.

Tags: BlackBerry Developers

Similar Questions

  • How to set a component at the bottom of the screen without using setStatus()

    I created a custom horizontalFieldmanager and want to put it at the bottom of the main screen in my application. My custom horizontalFieldManager contains three fields of bitmap... help me please put it at the bottom of the screen without using the setstatus method.

    OKS... If it is finally... Thanks for the help

  • How can I change the brightness of the screen without using the fn key?

    I want to know how to increase the brightness of the screen using the parameters of the computer, not a keyboard.

    Thank you

    Hello

    1. What is the brand and model of your computer?

    2. is it a laptop or desktop?

    I suggest to read the following steps and check if it helps.

    a. Click Start, click Control Panel.

    b. Select "Appearance and themes" when prompted in the Panel 'category view. " If you are in "Classic Mode", choose the "View" icon

    c. Select the 'Settings' tab in the display properties window.

    d. Select the button "Advanced" at the bottom of the window. This will take you to the properties of your screen.

    e. click on the tab "colors".

    f. Select the brightness scale and push or pull until you are satisfied with the brightness of your screen.

    g. Press 'OK' to adjust the brightness of your.

    More information consult:

    Adjust the brightness and contrast of your monitor: http://windows.microsoft.com/en-US/windows-vista/Adjust-your-monitors-brightness-and-contrast
    Note: There is for Windows XP as well.

  • The value of a field to the bottom of the screen without setStatus()

    Hello

    I want to set a field to always be at the bottom of the screen without using setStatus() as it is opaque. Most of the discussions I looked at have a complex layout on top to a field at the bottom. I have a very flexible presentation, now that I have just my fields added to the Senior Manager. Is there a good way to push a field to the bottom of the screen? Or is it only possible by substituting the functions of some manager?

    Ben

    It's not trivial.

    You must create a Manager and tell it to use all the way up and not be vertically scrollable.  So the dimensions that are placed in its sublayout will give you the height available to you.

    Now, you must add two managers to this Manager.  The first is that you'll add all you fields too - it will be a standard value, so that it scrolls.  The second will be the stuff you want at the bottom of the screen.

    In sublayout you will be setting page, the second field first, get its height and then set its position is at the bottom.  This will also give you the area that is available for your manager to scroll.  You will be then layout manager to say the things that he is restrcted to the height that you left.  As he scrolls will not worry.

    Finally, in sublayout, you will find setExtent making sure you use all the height that you were given.

    For more information:

    http://supportforums.BlackBerry.com/T5/Java-development/how-to-extend-Manager/Ta-p/446749

    http://supportforums.BlackBerry.com/T5/Java-development/create-a-custom-layout-manager-for-a-screen/...

  • I have used IE first time in 3 years. I have READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. Failed. Ideas please.

    I have used IE first time in 3 years. When I did, I could READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. No luck.

    How can I get Firefox to DISPLAY a more clear and clean police as Word? I choose different fonts in Firefox and sizes and nothing is really happening.

    You have clearly Type is defined on your system?

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Vista, why my cursor jumps around on the screen without reason?

    Vista, why my cursor jumps around on the screen without reason?

    You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

    This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

    If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

    I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

    I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

    Hello

    You will need to reverse the clean boot, as it is either incidental compared to
    the real cause of the problem. What, where you try to fix initially using the cleanboot?

    You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
    The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
    Right click on the device and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure) is
    CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
    3.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can do a repair installation that needs to save the data, but you will
    to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
    will need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
    or "BOLD")

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How to animate elements on the screen in the center of the screen without percentage

    Hi, I am very new to Adobe Edge. I take a class for itself at the College so I know the basics, but still to learn. I am trying to create a very basic animation where I have 2 active who are beginning to leave the stage on each side. I wish that the elements to be introduced on the sides and meet in the middle with a duplication of 20px. I tried to set a keyframe for both items at 0 seconds and affecting the translations of X - 2000px and 2000px and then by defining another keyframe to 5 seconds and change translations of X to 48% and 52% respectively. It made me the desired effect, but only because I have such a big screen. If the browser window is resized or the screen is smaller, the effect of not not remains the same due to the use of percentages to Center elements.

    In fact, my question is: is there a way to animate elements until the middle of the screen without percentages (perhaps using margin: 0 auto or something)? Or is there a way to accomplish what I'm looking for so that the positioning of elements is the same regardless of the size of browser window?

    Thanks in advance!

    Nevermind, just ended up using jQuery right and got the effect desired in a few minutes.

  • I have laptop computer, the use of Firefox is great, but I want to get search Goggle ridoff in the middle of the screen and use Bing or others with better rules of confidentiality? How change the search bar of glasses in the middle of the screen?

    I don't like political new goggle, which begins in March 2012.
    I don't want to see in the middle of my search bar of glasses display only one option. How to change it to any other intelligent research, such as the top of the screen, I use BING, but it's a bit like small space to see what I typed.
    TY

    Hi larafox,

    Copy this address: https://duckduckgo.com/

    Open Tools (Alt + T) > general, paste the address copied in the box next to Homepage:, click on the box (above) next of when Firefox starts: replace the show my home page option, and then click OK below.

    General Panel

  • Why my printer dell 968 of the internet feel used?

    Why my printer dell 968 of the internet feel used?

    Internet Explorer 9.0 was the problem.  When I tried to print it sounds internet has stopped working and then would not print.  I removed 9.0 and reinstalled the 8.0 and the printer works fine.

  • How to view NTUSER. DAT file as to the registry without using it?

    How to view NTUSER. DAT file as to the registry without using it?

    The file is from a different Windows instalation!
    I have Win 7 but it comes from my old Windows xp.

    Hi Leonnis,

    There are many ways to read the registry file without using regedit.
    Some ways:
    RegLookup: RegLookup project is dedicated to the direct analysis of Windows NT registry files. RegLookup is distributed under the GNU GPL license and is implemented in ANSI C. RegLookup provides a C API, a Python module and command line tools to access registry data structures.
    Download here: http://projects.sentinelchicken.org/reglookup/
    RegViewer: Is GTK 2.2 based registry Windows GUI file browser. It is platform-independent for the review of the files of Windows registry from any platform. Particularly useful in forensics files Windows of * nix systems.
    Download here: http://regviewer.sourceforge.net

    RegRipper:

    RegRipper is an application of forensics software open source developed by Harlan Carvey. RegRipper, written in Perl, is a tool for extracting data from Windows registry.
    Download here: http://regviewer.sourceforge.net
    KRegedit:
    kregedit is a KDE utility for the visualization of the native Windows registry files. It is similar to the regedt32 utility that is found on most Windows platforms. Only the format of the NT (NT4/2000/XP) registry is supported.
    Paulo Breim
    Centro Brasileiro Pericia

    Help, please!

  • half of the screen is used by "select the file to preview.

    Mr President
    everytime I open a folder in windows 8 the right half of the screen is used by the line "select the file to preview. I don't know how it appeared, but can someone help me how to remove it?
    Thank you

    When in the file Explorer > select "view" > R / click on "Preview pane" to delete. ".

  • What creative programs cloud must be purchased to create a Web site, where purchases can be made on the site, without using a third-party Web site?

    What creative programs cloud must be purchased to create a Web site, where purchases can be made on the site, without using a third-party Web site?

    as mentioned there are several adobe programs that could be used to create your website from the front-end. There is none that would be used to create the back-end.

    all front-end creative programs are able to add the features needed to communicate with your Web site main.

    WordPress is a content management system, but also the design Web site handles so I'm not sure it makes sense to invest in programs oriented primarily as adobe design and use wordpress.

  • help in the application without using the pivot function

    Hi gurus,

    Can you please help write the query without using the PIVOT function.
     WITH indata AS
         (SELECT 1 sn, '123:456,789,323:456,213,344,345:5454' x
            from dual
          UNION ALL
          SELECT 2, 'abcd:fgrfr,rfrf,rfred,tg:tg,tg:ophhh,op,vdfgbh:poijn' x from dual),
        instr AS
         (SELECT a.SN,
                 rownum RN,
                 B.column_value || CASE
                   WHEN B.column_value NOT LIKE '%:%' THEN
                    ':'
                 END column_value 
            FROM indata a,
                 TABLE(CAST(multiset
                            (SELECT trim(SUBSTR(x,
                                                (CASE LEVEL
                                                  WHEN 1 THEN
                                                   1
                                                  ELSE
                                                   instr(x, ',', 1, LEVEL - 1) + 1
                                                END),
                                                (CASE instr(x, ',', 1, LEVEL)
                                                  WHEN 0 then
                                                   4000
                                                  ELSE
                                                   instr(x, ',', 1, LEVEL) - 1 -
                                                   (CASE LEVEL
                                                      WHEN 1 THEN
                                                       0
                                                      ELSE
                                                       instr(x,
                                                             ',',
                                                             1,
                                                             level - 1)
                                                    END)
                                                END)))
                               FROM dual
                             CONNECT BY level <=
                                        LENGTH(x) -
                                        LENGTH(REPLACE(x, ',', '')) + 1) AS
                            sys.odcivarchar2list)) b)
        SELECT  col1_val2,
                col1_val1,
                col2_val2,
                col2_val1,              
               systimestamp
          FROM (select SN,
                      ROW_NUMBER() over(partition by SN order by RN) RN,
                       SUBSTR(column_value, INSTR(column_value, ':') + 1) VAL1,
                       substr(column_value, 1, instr(column_value, ':') - 1) val2
                  FROM instr ) PIVOT(MAX(VAL1) VAL1, MAX(VAL2) VAL2 FOR SN IN(1 as col1,2 as col2));
    Thanks in advance!...

    Any help would be appreciated.

    user590978 wrote:

    Can you please help write the query without using the PIVOT function.

    with indata as (
                select 1 sn,'123:456,789,323:456,213,344,345:5454' x from dual union all
                select 2, 'abcd:fgrfr,rfrf,rfred,tg:tg,tg:ophhh,op,vdfgbh:poijn' x from dual
               ),
         t1 as (
                select  x
                  from  indata
                  where sn = 1
               ),
         t2 as (
                select  x
                  from  indata
                  where sn = 2
               ),
         t3 as (
                select  level lvl,
                        substr(
                               x,
                               instr(',' || x,',',1,level),
                               instr(x || ',',',',1,level) - instr(',' || x,',',1,level)
                              ) col1
                  from  t1
                  connect by level <= length(x) - length(translate(x,'A,','A')) + 1
               ),
         t4 as (
                select  level lvl,
                        substr(
                               x,
                               instr(',' || x,',',1,level),
                               instr(x || ',',',',1,level) - instr(',' || x,',',1,level)
                              ) col2
                  from  t2
                  connect by level <= length(x) - length(translate(x,'A,','A')) + 1
               ),
         t5 as (
                select  lvl,
                        substr(col1,1,instr(col1 || ':',':') - 1) col1_val1,
                        substr(col1,instr(col1 || ':',':') + 1) col1_val2
                  from  t3
               ),
         t6 as (
                select  lvl,
                        substr(col2,1,instr(col2 || ':',':') - 1) col2_val1,
                        substr(col2,instr(col2 || ':',':') + 1) col2_val2
                  from  t4
               )
select  col1_val1,
        col1_val2,
        col2_val1,
        col2_val2,
        systimestamp
  from      t5
        full join
            t6
        on (
            t6.lvl = t5.lvl
           )
  order by coalesce(t5.lvl,t6.lvl)
/

COL1_VAL1  COL1_VAL2  COL2_VAL1  COL2_VAL2  SYSTIMESTAMP
---------- ---------- ---------- ---------- -------------------------------------
123        456        abcd       fgrfr      23-OCT-12 11.50.12.015000 AM -04:00
789                   rfrf                  23-OCT-12 11.50.12.015000 AM -04:00
323        456        rfred                 23-OCT-12 11.50.12.015000 AM -04:00
213                   tg         tg         23-OCT-12 11.50.12.015000 AM -04:00
344                   tg         ophhh      23-OCT-12 11.50.12.015000 AM -04:00
345        5454       op                    23-OCT-12 11.50.12.015000 AM -04:00
                      vdfgbh     poijn      23-OCT-12 11.50.12.015000 AM -04:00

7 rows selected.

SQL>

    SY.

  • Is it possible to start and stop the servers without using nodemanager?

    Is it possible to start and stop the servers without using nodemanager? If so, how?

    Hello

    Please follow the link below, it will be useful

    http://docs.Oracle.com/CD/E1322201/wls/docs81/ConsoleHelp/startstop.html#1243161_

    Concerning
    Fabian

Maybe you are looking for