Print and copy permissions and update a library with new permissions feature

Similar Questions

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• How to print and scan in xp with on the installation of office 2000

  Hello

  I removed office 2000 proffesional and it deleted the program printing and scanning.  Do you know if there is a separate program from microsoft or how I can install just part of the office.

  Thank you

  Jeff

  Hi Jeff,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of brand and model of the printer and scanner?

  2. what program you were using before you print and scan?

  I suggest to try the procedure described in the article and check if it contributes to printing and scanning.

  Use your computer to print, scan, fax
  http://Windows.Microsoft.com/en-in/Windows-XP/help/Setup/print-scan-fax

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• How to write insert and update blocks about with an if

  Hai All
  
  How to write an insert and update block education about with in an if
  
  I had a condition Ie
  
  If the time is between 0630 and 1030
  
  
  then
  
  Insert into Daily_attend
  ----
  
  
  Update Daily_attend set
  
  -----
  
  Concerning
  
  Srikkanth.M

  There is nothing preventing you to do this:

  BEGIN
    INSERT INTO x (mycolumn) VALUES ('A');
  
    UPDATE x
    SET mycolumn = 'B'
    WHERE mycolumn = 'A';
  
    COMMIT;
  END;
  /
  

  other than the fact that he seems a bit inefficient. Yet once you try to do, and why, is not clear.

  Can you put an IF statement in there to choose one way or the other under certain conditions? Yes. But I wonder if what you
  are actually trying to do is to reinvent the MERGE statement.
  http://www.morganslibrary.org/reference/merge.html

• [Explanation necessary] Clears the listview data and fill it again with new data

  Hello

  I correctly filled a listview in c ++, data analysed and does interesting things with it. However, I am drunk stumbling, unable to find a way delete and repopulate my display of the list...

  Question 1:

   

  1. How can after I insert data in the list view, I clear the list data and run again the same method (init) who populated the list view with the data in the first place?

  Here are the docs that I referenced and I don't understand how to implement the methods in my code.

  QList - clear() method

  https://developer.BlackBerry.com/Cascades/reference/QList.html#clear

  Using the data access Code, example
                            data_access/using_data_source

  GroupDataModel - Clear()

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__groupdatamodel.html#clear

  CODE
  
  Here is my code - filling of the display of the list of C++ and display of data in a ListView.

  MyApp.cpp

  MyApp::MyApp(bb::cascades::Application *app)
  : QObject(app){
      // create scene document from main.qml asset
          // set parent to created document to ensure it exists for the whole application lifetime
          QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
              AbstractPane *root = qml->createRootObject();
              qml->setContextProperty("yoyo",this);
              //grab references
              list_view = root->findChild("listView");
  
              // set created root object as a scene
              app->setScene(root);
  
              mNetworkAccessManager = new QNetworkAccessManager(this);
              bool result = connect(mNetworkAccessManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(requestFinished(QNetworkReply*)));
  
               Q_ASSERT(result);
               Q_UNUSED(result);                 json = new QFile("data/file.json");
  }
  
  void MyApp::init(){
      QNetworkRequest request = QNetworkRequest();
       // i call some service here
       mNetworkAccessManager->get(request);
  }
  
  void MyApp::requestFinished(QNetworkReply *reply){
      qDebug() << reply->error();
      qDebug() << reply->errorString();
      if (reply->error() == QNetworkReply::NoError) {
          qDebug() << "No error";
  
                  QByteArray data = reply->readAll();
  
                  if (!json->open(QIODevice::ReadWrite)) {
                      qDebug() << "Failed to open file";
                      return;
                  }
                  json->write(data);
  
          bb::data::JsonDataAccess jda;
          QVariantMap results = jda.loadFromBuffer(data).toMap();
                  QVariantList lst = jda.loadFromBuffer(data).toList();
              GroupDataModel *m = new GroupDataModel();
                     m->insertList(lst);
                     m->setGrouping(ItemGrouping::None);
                     if(list_view) list_view->setDataModel(m);
  
      }else{
          showDialog("Boo",reply->errorString());
      }
  }
  

  MyApp.hpp

  // Tabbed pane project template
  #ifndef MyApp_HPP_
  #define MyApp_HPP_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  namespace bb {
  namespace cascades {
  class Application;
  }
  }
  namespace bb {
  namespace data {
  class Application;
  }
  }
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class MyApp: public QObject {
  Q_OBJECT
  public:
      MyApp(bb::cascades::Application *app);
      virtual ~MyApp() {
      }
      Q_INVOKABLE
      void init();
  private slots:
      void requestFinished(QNetworkReply *reply);
  private:
      QNetworkAccessManager *mNetworkAccessManager;
      QNetworkRequest *request;
      QFile *json;
      bb::cascades::ListView *list_view;
  };
  
  #endif /* MyApp_HPP_ */
  

  hand. QML

  import bb.cascades 1.0
  
  Page{
  Container {
                          background: Color.White
                          ListView {
                              id: listView
                              preferredHeight: maxHeight
                              objectName: "listView"
                              listItemComponents: [
                                  ListItemComponent {
                                      type: "item"
                                      Container {
                                          Container {
                                              Label {
                                                  text: ListItemData.id
                                              }
                                          }
  
                                      }
                                  }
                              ]
                              onTriggered: {
                                  console.log("selected_index: " + indexPath)
                              }
                              horizontalAlignment: HorizontalAlignment.Center
                              verticalAlignment: VerticalAlignment.Center
                          }
  
  }
  }
  

  Question 2:

  How reference to the ListView object with the name "listView" in different parts of the MyApp.cpp file? Is there anything else I should add to the header file to make the accessible listView?

  Question 3:

  What happens when you call the clear() method? How the data model is affected? How the user interface is affected? What happens in memory?

  Question 4:

  How do you verify that the data in the list has been deleted so that you can go ahead and fills again with new data? What is the cheque that I perform?

  I would also like to know how you manage multiple views of lists and data sources in your applications. Best practices or ideas?

  Thank you
  

  I was able to clear the listview with the following code, if anyone is interested.

  listView.dataModel = null
  

  The dataModel must be set to "null".

• iCloud photo library with new imac

  Hello

  I have about 30,000 photos in my iCloud library. I had to buy a new iMac earlier. I opened the Photo and it comes up with the right number of photos, a few pictures are loaded, others are white squares with the little cloud symbol in there.

  It seems that the program does not download anything. ICloud preferences are configured to download the originals. However, at the bottom of all the photos he says still 30495 photos download... When I open some pictures it start downloading it, then the total number changes, but I'm not anxious to open images, was waiting for them to download.

  It is still an action following the program to start download them all on my new iMac?

  Thank you!

  If you check the download for the Mac originals, photos full size will start downloading. Be aware that 30 000 pictures full size will take awhile to download.

  I don't know that's what you have set, but let a few hours before checking it in.

  

• Hi I want to print and frame my photos with a mounting Panel how I created my image size in Photoshop cs6

  Communities

  The only option is to ask your printer to print the image with a border of white or black, where the proportions do not match. It is simple fractional calculus. A 4 x 5, 8 x 10 and 16 x 20 are all the same proportions. A 5 x 7 is a different proportion. You can either crop the image, or you end up with an extra space.

• Dial the node library with cluster table feature using the pointer of table data

  Hi all.

  I am writing a wrapper of LabVIEW for an existing DLL function.

  The service was, as one of its parameters, an array of structures.  The structure is very simple, containing two integers.  I use the call library function node to access.

  In Labview, I created an array of clusters, when the cluster has two integers of 32 bits as members.  So far so good.

  Now, I have to pass this in the node library function call.  I use here in trouble.

  I used the LAVA so the topic in the knowledge base as my main sources of information, although I read a lot of topics in the forum on the subject too.

  I don't understand I could write a new function that takes as a parameter a struct with the size as the first member and an array as the second, and I might just do this and do call the regular service, but I was hoping to do more simply.

  The file function C LabVIEW generates for me the COLD Lake when I choose "To adapt to the Type" and "Data in the table pointer", the prototype he expects is:

  int32_t myFunc (handful of uint32_t, uint16_t channel,
  int32_t FIFOnumber, Sub data [], int32_t numWords, int32_t * actualLoaded,.
  int32_t * actualStartIndex);

  And the prototype of the function in my DLL is

  int myFunc borland_dll (DWORD channel, channel of Sina,)
  FIFOnumber int, struct mStruct * data, int, int numWords * actualLoaded, int * actualStartIndex);

  It sounds like a match for me, but it doesn't work (I get garbage in the data).  The topic referenced above LAVA, I realized it would work.  This isn't.

  If I have to cast the data to the pointer-to-pointer I get when I generate c code in my wiring to a CIN struct and by generating, then I seem to get what I expect. But it seems to work when I choose "pointers to handles" too, and I'm expecting data table pointer to give a different result.

  Is it possible to get it works directly, or I have to create a wrapper?  (I am currently using LabVIEW 2011, but we have customers using 2009 and 2012, if not other versions as well).

  Thank you.

  Batya

  
  

• Update of grid with new credentials thorugh EMCLI

  I use Grid 12 c and want to automate the grid was updated with the new password for more credentials and host passwords. I can't find any documentation for it. I know how to update the named credentials, but would like to know the exact syntax to update password for the server host OS and a preferred credential.
  
  Thank you!

  A credential of name (for SEO we'll call it the ORACLE_NC) is specified as a proof of identity for a target or the target type. After changing the password of the user (for example on a host computer or in a database) whose user name is in the credential named ORACLE_NC, use the verb modify_named_credential to update the password in the credentials named ORACLE_NC.

• Update of grid with new Sys Password thorugh EMCLI

  I use Grid 12 c and want to automate the grid was updated with the new password for the account of all databases sys. To do this, I'll use a named credential which is the database to the user sys. I then use these credentials named to create a credential of the favorite target of one named credential. If I do it this way, then when I upadate the password, I have to do it once (credentials named) and it will be pushed to all users who use that name of credentials to access specific functions only as a sysdba user could (ie: DBA only) I hope this is the right approach
  Then, I use emcli to update the credentials-
  emcli modify_named_credential-cred_name = NC_SAMPLE...
  What is the correct syntax to update the named database credential credentials?
  I tried
  emcli modify_named_credential-cred_name = NC_SAMPLE - attreibutes = "" host password: passwd ""
  and the following error: column of ocurred:Invalid Error Host Password credentials
  
  
  What is the name of the column on the right to specify the database credentials?
  Which syntax to use to achieve this?

  Try this:
  emcli modify_named_credential-cred_name = NC_SAMPLE-attributes = 'DBUserName:sys; DBPassword:secret; DBRole:sysdba ".

  Replace
  The credentials that you want to change the 'NC_SAMPLE' name with the database.
  'secret' with the password real sys

  -Loc

• HP P1102W does not print and does not open when it is connected through the USB port on the road

  I bought this printer and I set it with a fixed IP address. After a few months, he has simply stopped working. So I decided to connect to the console and I wasn't able to do it either. I printed the test page and the ip address is 0.0.0.0. I, then, tried to plug in the USB cable on my computer and the drive that contains the software, it does not appear. He is a second and then disappears.

  I would like to get a solution to this problem before I throw this piece of 'material' on the discharge.

  Thank you!

  The 1102W uses what is called USB wireless.  The installation of the printer is the only way to recover the printer on a network in this case.  There is no place to set the IP address without getting a DHCP address first, which is not the case here.

  First, retrieve the default network printer.

  Restore the default wireless settings.
  a. turn off the product.
  b. press and hold the wireless switch and the
  Cancel button and then turn on the product.
  c. hold the button until all lights flash in unison.
  and then release the keys.

  This should reset the default settings of the network.

  Then, uninstall all the software of the computer printer.

  Reinstall the printer from here click on software and Driver Downloads and select your operating system.

  It will take a computer on the same network and USB cable.  Click network installation and connect the USB cable when prompted.

• Print and staple of pdf Adobe Professional

  Hello

  Could someone tell me how to print and staple a document with 8 pages.

  I want"and"tp print double sided staple set by set (collect).

  The Xerox machine has good configurations, but for some reason, Adobe overwright this configuration.

  The result is 2 clips set set...

  Thanks in advance

  Found this in a froum:

  1. click on print, 2), click Advanced, click 3) check the box marked 'print the image's

  Works great!

• Creating items and updates

  Hello

  Version 9 is the first version that I work with Premiere Elements.

  Doesn't Adobe ship updates or patches with new features, bug fixes or improvements in performance for Premiere Elements?

  Thank you

  Jorge.

  Not regularly. There was an update to PRE7 and the other for PRE8. Nor added new features, some bug fixes.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Wireless configuration of HP C4780 with new router and Mac (wireless network not found)

  About 10 months ago, I bought a new router. I already had several problems connecting my HP C4780 to my old router, and after setting up the new router, I was totally unable to connect the printer wireless to my router.

  I have reset the system to the printer on my Mac, I have reset the settings on my printer wireless, I downloaded the latest HP software, I've uninstalled and reinstalled the HP software several times and I have had no success. When running through the Setup Wizard, I was able to select the printer and method (wireless network set up by USB) before plugging the USB key. After that, the Setup Wizard says "Device not connected" (DUH!) and the screen select network said simply "no discovery goes Wi - Fi network." I ran the print to the printer from the Network Configuration, and he identified 15 networks (mine included). So, it seems that the Wi - Fi receiver on the printer still works...

  Any suggestions?

  P.S. This printer has been nothing trouble since I got it, and I wouldn't recommend it to ANYONE (I like actually...).

  After attempting to run the installer on my boot camp Windows 7 Ultimate version, I fell at last on an obscure statement in the configuration of the PC software for the c4780. It says to connect the computer to the router using the router WPS button.

  I have reset the configuration on the printer and turned off wireless the wireless, then I pushed the the router WPS button until the blue WiFi light on the c4780 lit. THIS SEEMED to BE THE KEY STEPS to CONNECT THE c4780 to MY ROUTER.

  After that, the configuration and setting up the printer on my Mac using the system of preferences was a piece of cake. Functions of the printer and the scanner work with Mac drivers.

  Problem solved... For now... This printer is so buggy, I have no doubt I'll have similar problems in the future.

• Will Adobe CC and apps like PS CC and LR CC work with 10 to win coming?

  I am running Adobe CC under win 7 x 64 29 July MS will modernize me at will Win10 Adobe CC and CC PS and LR CC lik apps are running under Win10?

  Compatibility matrix - not yet updated for Windows 10 http://www.adobe.com/support/OScompatibility.html

  - and more on 16/07/2015 https://forums.adobe.com/thread/1902108

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems