Print directly to the printer using RUN_PRODUCT in Forms6i

Similar Questions

• direction of the motor controlled by the adjustment wheel

  How to control the direction of the engine using the adjustment wheel, for example, if the pointer locates the negative area, the engine was reversed.  Usually the engine management is determined by AIN2 and AIN1 values in the microchip, if the value of AIN1 is larger than AIN2, the engine would turn in a certain direction, otherwise, the engine was reversed. However, I would use only Dial control to control direction. What should I do?

  Use the feature comparison > 0.

• Beeps of the words using first Pro CC

  Hello, I am trying to beep on some phrases, but I can't find the good tutorial or instructions. Can someone point me in the right direction of the words using first Pro CC beeps?

  Use the audio part 'tone' of the constructed bars in your article, and cut the offending words and add a tone beep on top.

• HP Officejet Pro X576dw: Wireless Direct Printing using the Lan cable

  Hello

  I buy HP Officejet Pro X576dw multifunctional on tomorrow. I understand that this printer has a direct wireless printing features that I can print from my tablet or IPad.

  But I doubt if this wireless direct printing can be done while the printer is connected to the network via Lan cable permanately IPV4.  This means I can print from my mobile phone at anytime via Wireless Direct without the Lan cable.  Kindly advice. Thanks in advance.

  David

  Oh, which means that you simply unplug the Direct SSID wireless and you should be able to print via your router LAN cable now.

• HP 3520: Impossible to print using wireless Direct from iPhone

  Have been printing for the last 2 years of my iPhone using Direct wireless. My HP3520 has never been protected password. Tried to print this morning that the usal but cannot print. Somehow my HP3520 became password protected. How can I disable this?

  Hello

  From the front panel of the printer, using up and down scroll arrow until settings is highlighted, then press OK.

  Highlight the Wireless Menu and press OK.

  Select Direct wireless , and then press OK.

  Highlight (No Security) and press OK, confirm if necessary.

  Which will disable any password for the Direct wireless network and you should be able to reconnect from your iPhone.

  Respect,

  Shlomi

• HP LaserJet P2050 Series PCL6: How to print the mark using PCL commands

  Our old system is printing of document using PCL commands, previously, only contanins text and barcode (using BARDimm), but we need now to print the mark registered with the name of the company, that the police should I use which has this symbol? Thank you.

  Assuming that your old system uses PCL5. You must first issue a set of symbol code that has a mapping to the registered symbol.  The Windows Latin 5 symbol set has the R symbol maps to chr (174) or (0xAE) said in

  Hex. The first publication of the code for the symbol set...

  (5 T

  and then the character itself

  0xAE

  Now that the characters cannot be entered directly on the keyboard, then you will need to find a way to integrate the character in your print workflow.

  Before the character himself is printed, you should choose a font. For most, if not all, printer fonts probably supports this defined symbol. For the test I used the arial font and it printed fine. The code for arial 12 pt would be...

  (s1p12v0s0b16602T

  Specify police, symbol set and finally the character. When you printed the character that you'll want to come back to the police in the use and the previous symbol set OR you can print the symbol as a secondary font. If you don't know how, ask here.

  I now have the idea how you would do this with PCL6. @dansdaduk can give you good (or bad) news on that.

• Confirmation page when faxing directly from the printer, but not when fax from a computer in network

  I have an Officejet Pro 8600 more network (using the wireless) all-in-One.

  If I fax directly from the printer (using scanning and fax), I receive a confirmation page.

  When I fax from my computer in a network (using the 'Fax - Hp Officejet Pro 8600 (network)' pilot), the status display shows 'composition', 'connection' and 'send '. However, no confirmation page is printed.

  How can I set up the printer to publish one page of confirmation if the fax printer OR my computer using the wireless connection?

  Thanks for your help and your time.

  Planckster

  Hi Planckster,

  A report by Fax of Confirmation is an available option when sending the device itself.

  When sending a fax from your PC, you can find the most recent history of fax by opening the HP software.

  Click on manage the Fax setting, and click Fax history.
  The screen list a report on the recent work of fax, a printed report is not an option for this task, however.

  Shlomi

• Cannot control printer HP 6510 directly from the computer

  I use the HP - 6510 B222a printer and used to be able to control all functions directly from the computer.  All options would appear in a window allowing me to select an assignment (printing, scanning, etc.).  All of a sudden, this option disappeared and now I can only control functions of the printer from the small screen on the printer itself.  Can someone help me with this problem?  I wish I could go back to control everything directly from the computer.  In addition, there is no way to determine the levels of ink on the computer screen.  Thanks for your help.

  Hello

  Reinstall the full feature software and driver on your computer can help. You can download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=au&LC=en&DLC=en&product=5058336

  (Note: B222a and B221a use the same driver).

  Kind regards.

• Where can I find directions to the user for the hp officejet J4680 printer?

  I am a novice and you want to learn how to use my Officejet J4680 printer all-in-one. Where can I find directions to the user for the HP Officejet J4680 printer? Thank you for responding.

  The user guide and other documentation for the Officejet j4680 can be downloaded here at HP.

• HP ink cartridges print transfers which will be heat pressed on the fabric? - and print directly on the fabric?

  I heard that HP uses a different type of ink as other printers...

  Can I print transfers to the press hot on the fabric?

  And printing directly on the fabric?

  Thank you!

  Hi - I didn't actually know anything about this, but I did a little research on the site and found a few interesting articles:

  Here is an article on the use of your printer to print on fabric: http://h71036.www7.hp.com/hho/us/en/ep/articles/print-on-fabric.html

  And here's one about printing on fabric transfers: http://h71036.www7.hp.com/hho/cache/344461-0-0-225-121.html

  This is the home site of printing to HP with more articles tips: http://h71036.www7.hp.com/hho/cache/588217-0-0-225-121.html?jumpid=re_r602_go/homeoffice/ep/home-epb

  Hope this helps - and thanks for the idea!

• How to get the driver to a parallel printer using windows update without a parallel port on my laptop?

  I have an asus WL500g and I use it as a print server. On my big pc on windows 7. I managed to install the driver on the printer directly on the pc connection an update of windows to get the driver of the Sina. After installing the driver I passed it to the port by using the ip address of my router. It works, but my laptop doesn't have a parallel port, so it is not possible to obtain the driver. What can I do?

  You do not want drivers for parallel port on the laptop anyway given that the laptop is not connect via the parallel port, but rather on the network. You would most likely want to install drivers on the laptop Asus print server, and then print to a network printer drivers. Download the Asus former and latter printer mftr. MS - MVP - Elephant Boy computers - don't panic!

• Print file .rep directly on the printer, configure the application server

  Hello

  I spent several hours on this forum and unfortunately not found a solution yet so hoping someone has an idea that can help me solve this problem.

  Using forms/States of oracle 11g with a linux application server, we develop on windows machines. Printing reports using compiled .rep files.

  We have a network printer sharing (HP) that is configured on the application server, and we can print on the correct printer directly on the application server.

  Problem is when I try to print a report when executing the forms of oracle on my machine of development directly to the printer.

  I tried:

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_destype, printer);

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_desname, 'APPSERVER_PRINTER_NAME');

  When I put the report_desformat in 'pdf' format I can see the reports to enter the print queue, but they do not reach a 'State' order ' print file empty. "

  When I remove report_desformat, he sends in eps and as I understand it, it prints, but with bad formatting (I work remotely and run by what their colleagues say.)

  CUPS 1.4.2 reference printer queue tab.
  

  The report generates in the browser if I change the destype to produce and use web_show_document to display it as we usually do.
  

  
  

  I understand there are solutions using a java bean or involving the installation of the software on the client computer, but my employer is unwilling to go to that direction. We have only a handful of reports that require the ability to print directly to the printer.

  
  

  That someone has an idea of what the problem might be or help provide additional steps, I can take to solve problems? I have no idea how to do to configure printers, our IT Department managed this and they say, it's good so I don't know if there is a problem with what I'm doing or there was something installation related rate with this network printer.

  
  

  Thanks in advanced for any assistance!

  I have given up trying to use a report_desformat of pdf and paste it with the default value of the eps, after review, it seems pretty close match that generates pdf format and despite the fact that the queue on the application server throws a misprint even with the eps format it actually always draws for the good enough for now. Would be nice to know what happened here, but the problem has been resolved.

• 8710 printer all-in-one: how to scan a document directly to the e-mail

  How to scan a document directly to another email

  Hello

  You must set up the first and the simple way is to use the software of the printer from your computer.

  b double-click the icon of the printer on the desktop.

  (b) select scan configuration of e-mail or Assistant,

  (c) enter sender details

  After that, you can send scanned image/document directly from the printer control panel and enter the recipient (s) (s) address from there by e-mail.

  Kind regards.

• print PDFS directly to the default printer without looking at a screen

  We are generating PDFs off APEX mainly using Jaspersoft.    For some reports, it would be better if we could skip the step of the 'view on the screen' and send directly to the default printer.

  Has anyone seen a solution to get there?

  ebenwalker wrote:

  We are generating PDFs off APEX mainly using Jaspersoft.    For some reports, it would be better if we could skip the step of the 'view on the screen' and send directly to the default printer.

  Has anyone seen a solution to get there?

  Actually, no. It is a relatively frequent, but with no simple resolution question. What you ask for is considered a breach of huge security in web terms. Access to local resources outside the sandbox of the browser to be launched or explicitly approved by the user.

  Among the possible solutions that have been suggested are:

  • Connect a printer directly to the server and the mode asynchronous feel secure by a background process.
  • Using a printer that is configured to print directly from e-mail and send the document to it (looks like another flaw of security for me)

• Post in print, using the burst control file

  Hi all
  
  We use the break control file to print and send. Email option works very well. But when it comes to printing, printing "PDF file not printed. 128 MB of memory is necessary to allow a direct PDF printing"in printing.
  
  We use CUPS and this is the way that we use for printing.
  
  IPP://localhost:631/printers/YG_MAIN
  
  When we try to run the same program manually, giving the name of the printer and the number of copies at 1, then we are able to see the pdf output. Other reports are normal bi publisher also works well, w.r.t. this printer. We face this problem when we run xml program, with the option of printing bursting.
  
  Suggestions please...
  
  ---------------------------------------------------------------
  Here's the full breakdown control file,
  
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xapi:requestset xmlns:xapi = "http://xmlns.oracle.com/oxp/xapi" >
  < xapi:globalData location = 'stream' >
  < / xapi:globalData >
  < select xapi:request = ' / XX_IMB/LIST_G_PAT/G_PAT ">
  < xapi:delivery >
  < xapi:email id = "123" server = "XXXXXX.com" port = "25" from = "[email protected]" > "
  < xapi:message id = "123" to attachment = "${DESTINATION}" = "true" content-type = "text/html" subject = "Test email" > please find the attachment < / xapi:message >
  < / xapi:email >
  < xapi:print id = "print1" printer = copies "ipp://localhost:631 / printers / ${DESTINATION}" = "1" / >
  < / xapi:delivery >
  < xapi:document - output type = 'pdf' flow '123' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Email"]" > "
  < / xapi:template >
  < / xapi:document >
  < xapi:document - output type = 'pdf' flow 'print1' = >
  < xapi:template type = "xsl - fo" location = 'xdo://XXCUS. XX_MAIN.en.us"filter=".//G_PAT[DESTINATION_TYPE='Print"]" > "
  < / xapi:template >
  < / xapi:document >
  < / xapi:request >
  < / xapi:requestset >

  BI Publisher burst of CUPS printer uses no PASTA, out don't is converted from PDF to Postscript, it does when it is executed via simultaneous Manager.
  You can put an entry in the next $XDO_TOP/resource/xdodelivery.cfg (replace with your printer):
  

  
  
  
  
  ipp://mycupsserver.mydomain:631/printers/MYPRINTER
  
  /usr/local/bin/pdf2ps -paper A4 {infile} {outfile}
  
  
  
  

  Kind regards
  Gareth