print part of a document
I was sent a document of drawing size 8.5 x 11.
I want to markup and then print only part of the document expanded on an 8.5 x 11 page size.
Is this achievable in Acrobat X? If so, how?
Post edited by: rbturn
Post edited by: rbturn
Acrobat has some markup tools, you can download a trial version to see how they work. You can then crop the document leaving only the part of the document that you want, and then print the scaling and centering of the pdf to adapt to any desired page size.
Tags: Acrobat
Similar Questions
-
OfficeJet pro 8000: Officejet pro 8000 prints the part of the document
Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.
This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.
The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.
Not very well where to go with this, help please!
Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?
-
OfficeJet Officejet Pro 8500 has more eAiO Scan to computer scans only part of the Document
I am trying to scan my Officejet Officejet Pro 8500 has more eAiO scan to my iMac (Mac OS X 10.6.8).) IT scans only part of the document is scanned. However, when I copy it, the entire document is printed. I was looking for, if I could change this on the officet, or the system of preferences on my mac, but couldn't find anything on the 8500. On mac, I could change something, but it was only the scans on insiders from my computer.
Scanning directly from the Officejet comes in very handy when the digitization of books, with one hand, I have to push it and the iMac is not in reach of the officejet...
Otherwise, I am very satisfied with the printer and everything works fine...
Thanks for any help.
iMac (Mac OS X 10.6.8)
Hello
I hope you feel better now!
Please specify the exect option that you use to scan from the control panel of the device.
What exect icon are you clicking after selecting the scam?
If it is computer, try to update the latest version of the driver and check if the Scan shortcuts Manager do not appear:
Click the Apple icon, then software updated. Be sure to select any update HP available.
If you don't see the specific option yet, you will need to delete all HP software installed completely and install the latest version:
* Please note that the following steps will delete all HP software installed.
1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
2. Select Applications
3 select the Hewlett-Packard folder
4. double-click on uninstall HP application
5 follow the uninstall to prompt to select a device to uninstall
6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
7 approve any prompt to uninstall all HP software.Download and install the latest driver below:
Finally, update the latest driver by clicking the Apple icon, then software updated.
If you use another method of scan, please specify which option you use.
Kind regards
Shlomi
-
How can I insert a reference to another part of a document?
Hello people, I want to add one reference to another part of the document, for example a reference to a previous chapter.
I think it won't be easy but I am a new user of pages.
Thanks in advance.
There is no support for bookmarks in any publication pages v5, and consequently, intra-references (hyperlinks) are not possible.
Bookmarks are available in Pages ' 09 v4.3. Discontinued by Apple in 2013, he continues to work on El Capitan 10.11.5.
-
You can assign a print preset to a document
Is it possible to assign a print preset to a document? I have several different documents of different size/color/quality and every time I print one I do not forget to change the print preset. Any help gratefully received.
The presets of the printer storage is a feature of Mac OS X through its print dialog box - no Pages. You can associate the printer by default, the paper size and orientation of the page via the Pages of Documents v5.6.1 Panel.
-
printer will not print 2nd page of documents
Hi my printer HP photosmart 5520 not print 2nd page of documents can help you Anne Sheil
1. go to your Inbox2. Select the desired message you want to printPlease select the three dots (...) next to categories4. click on print5. a preview of the message is displayed and also printing options. (don't forget to click on "all pages" for multi page email.)Just click print.Dyami & Wanikiya
The zig - zag team -
My printer prints a word (my documents) but prints photos of my images,
My printer prints a word (my documents), but prints pictures of my images, black misuse. Printer copy black text.
Moved from feedback
Original title: impression of the printer
Hi Helen,
It would help if you could answer these questions.
-What version of Windows is installed on the computer?
-Don't you get an error message when you print from MS word documents?
-What is the brand and model of the printer?
-Have you tried to uninstall and reinstall the printer to see if it makes a difference?
Discover the answer to Debbie_H on the same issue in http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/unable-to-print-from-ms-word-only/67b6148a-4447-42b6-b4a3-972807a4f963
If all goes well, it could work. Let us know the result after trying the steps mentioned in the link.
-
HP Deskjet 3050 printer. Cannot print pictures from my documents.
What can I do to print images of my documents I hav a HP Officjet 3050
Moved from IE8, Internet Explorer - XP
Original title: print My Documents, I have a HPDeskjet 3050 printer, why can't I print images of my documents
http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=4066452
assistance troubleshooting for your printer.
-
HP Deskjet 1050: 1050 printer won't delete document queue the printer on a Surface of 3 pro
I have a 3 pro Windows 8.1 running surface. My printer is HP Deskjet 1050. I printed a document, but the queue of the printer says that the document was still printing. I tried to delete the document, and the queue has written that it is deleting. I deleted all the documents in the queue. It remains, said it is deleting. I restarted the Surface, the printer off, disconnected and then restarted and all connected. Always the deletion. I deleted the printer as a device, but when I add again, it comes with a print queue that is always remove only a single document.
I am up to date on all updates.
What should I do? I can not print anything else, until it disappeared from the queue.
Hello
Try the following.
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter.
Scroll down to the print spooler service, right click and select Properties, then click the Stop button.
Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the document has been deleted.
Kind regards
DP - K
-
Office Jet 6600 does not print web pages, word documents fine impressions
Hello. My Officejet 6600 will not suddenly print web pages. It prints very well word documents. I have restarted my computer, restarted my printer and not better. My wireless works very well - as I said, very well printed word documents. Help!
Kim
Hello Kim, alias @Sydlor , welcome in the community of HP!
I'm here to help you with your printing issue!
As you cannot print Web pages, I think that the web browser or Web pages could be the root cause of the problem, however, I could certainly be wrong too. I think this way because normally when there is a conflict of printer driver, you would not be able to print from anywhere at all from your PC.
I suggest that you try using another web browser and try your impression from here to test this theory.
If you want to let me know the operating system you are running and what web browsers that you tried, I'll help more if necessary. Please let me know!
-
HP Color LaserJet CM1312 nfi no print only one page (document)
Hi all.
I'm in big trouble with Color LaserJet 1312 nfi (on 2 PC). Printer still print ONLY a single document (regardless of the number of pages) that I can't continue. I have to restart computer or the user to login and I print a new document. Scan OK.
PC config:
Windows 7 x 86
connect via the USB port (but LAN made the same mistake)
PCL6 driver
I tried:
reset to factory default
the latest firmware update
connect via LAN instead of USB
Print via another PC (printer sharing)
connect the printer to the other PC (USB, LAN)
install the drivers of PCL5
turn off Mopier mode (not available)
Win XP - OK (printer so no problem)
Any ideas?
Thank you.
Hello.
Installation new version Universal Print Driver for Post Script - no change.
I tried a thousand ways and WE work:
install driver of the old school-HP Laser Jet III from Windows Update.
I hope it helps someone...
-
My HP C5280 printer only prints part of photo
Original title: Mr
My HP C5280 printer only prints part of photo
My HP C5280 printer only prints part of photo
· try to uninstall and reinstall and use the latest printer drivers for your model of hp
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Walter, the time zone traveller
-
I'm a student on a computer, I was responsible for "securing" the part of a document, to arrest any person modifying a part of a report. Any help would be appreciated, I'm on Vista Home premium and the use of students 2007
Office:
http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx
Office newsgroups
Discussions of general issues of the Office.
Discussions of general issues of Word.
They will help you with your office questions when repost you in the Office discussion groups above.
See you soon.
Mick Murphy - Microsoft partner
-
Whenever I try to print something from my documents opens and says under xps. file and does not print. I also tried troubleshoot my computer and it says that my printer is not a driver and whenever he tries to fix it and says that it cannot install a driver. any help would be appreciated
Looks like you have the default printer configured to be Microsoft XPS Document Writer. Go to control panel > printers and devices and see which printer is enabled in a green circle. If this is the XPS Document writer as I suspect, you can right click on your printer and then select "Set as default printer" after you do this, or if you cannot do this, answer with the brand and model of your printer and we are able to help if you have a driver problem.
-
I reinstalled the printer three times. It works fine when I first install it, and then when I try to use it later it will not be printed. I ran the resolution of problems and there was a problem it could not fix. The last time that I used it, I was trying to print, nothing happened. About an hour or two later the printer came herself and documents printed on its own. I was not even at the computer. I had the printer installed more than a year without any problems. This just started happening. The only thing I can think who might have caused it comes from our modem died and we had to replace recently.
I have a Toshiba Satellite L305-S5957 computer laptop, Windows 7, 32-bit and the printer is a MFC-495CW brothers. Any advice would be appreciated. Thank you.Hello
Please contact the Microsoft community. We will be happy to help you with your concern.
According to the description, you are facing problems with the printer.
Please follow the steps to solve the problem with the printer. If the problem is still not resolved, please uninstall and reinstall the printer.
Method 1: Please follow the steps in the link:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2: Remove and re - add the printer
Install a printer
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.
Maybe you are looking for
-
HP Pavilion dv6 problem "Enter the password administrator or power on password"
My children entered the BIOS on my HP Pavilion dv6 Admin password. After that three bad tent the screen says SYSTEM 52566801 DISABLED Can anyone help me, please. Thank you Stepan
-
How to activate the Infrared Port on the Satellite X 200
Hi all, I'm Italian (sorry for my English...)How Activate/activate the infrared port on my X 200? It seems that is not properly working, infact, all devices ir in the area are not recognized?Annex 'Device Manager'-'Network adapters' there is only 'WI
-
the display vertical and horizontal lines
Help, I went simply to connect and it's my screen. You want to know if it is a known problem and if they should solve this problem, I bought it in January 2013. How is that going to cost I only had a one year apple care. What is the problem with tha
-
Access a chart xy both inside and outside of a loop
Every morning. Semi-new LabVIEWer here (five weeks fun). This one has left me speechless. I take data from up to three units GPIB, generating three sets of data current-voltage, and I'm working on a xy real-time graph. Data in a table to two dimens
-
Also, for some unknown reason, also get error messages when you try to update to Adobe/BT Broadband and Nokia PC suite... Common error. "Could not access network location % Appdata%\." I'm not on a network and have never?