Print size problem.

Similar Questions

• Designjet T520 print size problem

  Hello my name is Sonny, we're a small plane forming of sheet metal co.  We print a lot of drawing and plate unfolded size.  We use Catia, Solidworks and Surfcam most.  We recently bought a T520 replace our old 750 c +.

  The problem I have is the ratio is out of length, width, if I print a 24.00 24.00 x sq it prints x 24.00 23.95.

  I tried it on vellum paper and 4mill inkbond and with the settings of all the 'best '.

  been through the book and tried everything I think.

  need help please.

  Thank you

  Sonny

  Hello.

  Not easy to understand, but I guess the print length is too short.

  If you go into the setup, you should have the quality - calibration paper feed maintenance.

  Run calibration in advance paper create and test with new impression.

• 10 the desire: desire 10 cannot adjust the print size after installing new cartridge

  After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but find no way to adjust the size of printing... can anyone offer a solution... Thank you

  the solution: problem was with Firefox, when I switched to Chrome it prints perfectly!

• HP Envy 4500 e-all-in-one: HP Envy 4500 print size

  Since I installed this HP Envy 4500 e-all-in-one printer, it prints in small text. I went to tools, options and preferences and can't seem to find a way to change the print size. Any suggestions? Thanx

  Hi @husky52358,

  Thank you for visiting the Forums from the HP Support! I see when you print to your HP Envy 4500 text is very short, you tried to go into the preferences and options without success.

  You try to print a document or an element of a web page? What program or browser you use?

  If you are using a Windows operating system, please try the following:

  1. open an Internet Explorer browser, go to the far right click on the gear icon

  2. Select Print Preview

  3. now along the top, you will see an option to change the size of the page, please make sure that it is set to adjust or 100%.

  4. now, try a test page, the text is expanded?

  Now go ahead and run the HP Print and Scan Doctor:

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know the results.

• Print size.

  I have a deskjet D4260 installed on Windows XP Home Edition.  When I print from some Web sites, the print comes out very small and almost unreadable.  Other sites, it comes out normal. I can't tell in advance which sites will print normal and will not lower case. I tried various "adjustments" but nothing changes.  My previous normal HP printed size all the time.  Is this a site problem or I do something wrong?  I'd appreciate some insight on this question.  PS - I'm pretty new to computers, then you will appreciate help that is not too technical.  Thank you.

  It is a problem of Web site. When designers Web page design web sites, they defined the size of the police, and when you print, it will be printed in the same size. What you could do is to copy the text and paste it into a text editor such as Wordpad or Microsoft Word. Then increase the size here and then print it.

• How can I stop the touch pad to change the print size

  When I type on my laptop, using windows 7, and I brush against the touchpad, change the size of the print. How can I stop this?

  Hello

  1. with what application are you having this problem?

  2. organize the CTRL key pressed while what is happening?

  Check if CTRL is pressed in the on-screen keyboard:

  a. click Start and type osk in the search bar and click on enter key.

  b. If the CTRL key is highlighted, then click on the CTRL key .

  c. check if the print size is reduced;

• After the transition from XP to Windows 7, the custom-printing size selection box has failed.

  I always was able to use my C5180 Photosmart to print pictures of custom size on my old computer with XP.  After getting a new computer with Windows 7, the custom size box says "the custom paper that you have just set will become unavailable for selection until you have left and returned in the preferences to print/properties." (I did too many times to count!) All except 'Cancel' choices are grayed out.  This feature still works on my old computer, even if the box selection and formulation are different.  I have checked and checked the drivers and we have tried many other solutions.  I have worked in this market for a week or two and see that many other people have similar problems.  I would like to buy a new hp printer, but see that even with the new hp printers people have problems with paper sizes custom, which is very important to me - I print a lot of cards of various sizes, mainly of 6.5 X 10 inches.  Of course, no support is available for this printer "obsolete". (It may be "obsolete", but it works fine with XP). I also can't get any definitive information on this feature in the new hp printers and have noted that some people have problems with this feature on the new printers also.

  Thank you so much Shane R. for your expert advice.

  Can I try your solution in the future, but right now I'm satisfied by another solution, I realized with the help of a thematically response on a Windows 7 forum.

  First of all, I'm pretty positive, I used the correct driver because I downloaded the most recent, verified and recontroler, etc.  And, fortunately, most of the features all-in-one is working well.  Because of this, I hate to try drivers for another model - as I have solve my problem. I could end up with another problem - as no function of scan or something.

  Here is how I was able to get custom formats:

  'Start' to 'control panel' for 'Hardware and Sound' ('View drivers and printers')

  Click on the printer

  Choose "Print server properties" at the top of the screen

  Click 'create a new form.

  Give form a new name, for example 7-10 card and put the name into the box just above

  Complete custom down, for example, print size 7 x 10

  Click 'save form '.

  Click "close".

  The custom name and size is then appeared in the photo program I feel for and I was able to use it.

  Thank you, again. (Where can I provide Bravo?)

• Printing envelopes problems

  I have recently implemented the Photosmart 5525 (5520) but I have problems printing on envelopes.  I use a greeting card program that prints cards on standard letter-size paper is then folded in half.  The envelope is size 5 x 8 ¾ ¾ but I can't find it listed under media sizes and it doesn't seem to be a choice to make a custom as on my old HP printer size.  Any suggestions?

  Thanks for your help.  I've seen a few posts on the various Councils who suggested using a choice of C5 envelope, since their dimensions were fairly similar to my A9 which does not support the HP.  I tried in my greeting card program, and it worked fine.  I have will keep your information and can use it in the future.  Once again, thank you.

  Barry

• Adobe Illustrator print size and display size is not fixed. Helped!

  Hello, currently I am facing a problem on my size real of the display and print size.

  It's the size of my real of the display:

  

  It's my image:

  

  Why after I printed the size is not suitable? I use Adode Illustrator CS6 and my page size is A4 size. Any solution for this? Please help, thanks!

  Best regards.

  Looks like a margin is getting added.

  Go to "Layout" in the dialog box print settings, and then reduce the margin to zero

• You can open a document in Photoshop cs6 and auto open in the print size

  I work at 500 photos per day and the print size helps out me. is it possible to open the document in print format to save me a step?

  It is possible. That would be called a script of the event and it would be placed where predefined Scripts under Scripts folder in the settings folder.

  Then open Photoshop and go to file > Scripts > Scripts event Manager to have this script that is executed whenever you open a file.

  The problem is to find a script that is already doing, or ask someone to write it for you.

  You can ask: http://forums.adobe.com/community/photoshop/photoshop_scripting

  Gene

• Image size problem

  Maybe the Adobe forum is not the best place for it but you are most knowledgeable I know.  I'm using CS5 Extended on Windows 7 64 bit with a printer Epson 7900.  I have always noticed that matched the size of the image of the printer not exactly the size of the image specified in PS despite my setting to the correct screen resolution in preferences.  But I always just thought it was a quirk of PS.  I mean that a printout of 24 inches can be off by 1/2 inch.  But now that I do the gallery wraps size accuracy is important.

  So I made a few comments.  The print size of the printer is the size that the PS says it should be in the direction of movement of the print head, but comes short in the direction of travel paper or canvas.  If I flip then the image in PS then it displays 90 degrees differently, the new printhead travel side is what said PS and it should be on the other side is short... even if the short side was the right size, while he was in the direction of travel of the printhead before rotation.

  Thus, it seems that the paper feed is turned off.  Except for one thing.  The prints are sharp and I think that if the forward speed was wrong, they would not.  No idea what gives here?  Any help would be appreciated.

  Howard

  I had the same problem only when printing on canvas media. I calculated that multiplying by 1,009 would get me the right result. So I need a 60cm print I would be implemented as 60,54 cm (60x1.009). To calculate your multiple factorial trial (desired print size) / (size of the physical results), which is in my example 60/59.45=1.009.

  .. .or in your example 24/23.5=1.02

  so if you want a print of 24 set in up in Photoshop as in 24.48

  I use this as a workaround, so the question is still out there if anyone knows why this is the case!

• How can I increase the print size letters on the screen

  Sometimes, printing characters are too small and I need to increase the size (%) before printing a form

  The size of the font displayed on the screen does not directly affect the font of the printed size. The screen size is affected by the change of the Page or Zoom the text Zoom level. The print font size depends on the scale as shown in layout or preview before printing.

  File > Layout Page or file > print preview
  
  100% is the normal setting - it change that you find necessary

• HP Officejet Pro 6830, model 6: print head problems

  Have an Officejet Pro 6830, model 6835.  Error message received saying this printer had print head problem.  Also the error code oxc19a0020.  Troubleshoot-carried out every day to solve the problem without success.  Reset, change cartridges, activated and deactivated (including source) and nothing has worked.  Bought on 23/04/15.  Only three months old.  Help!

  Hi, I would advise to call HP support immediately about this, as it is likely that you will need a replacement printer.

  Can you please let me know how you go?

  Thank you

  Ciara

  

• J4580 print cartridge problem: [Tri-Color] refer to the device Documentation

  Well, I'm starting to feel like I knew better, buy another HP printer after dismal luck with two all-in-one before.

  My J4580 already gives me headaches after only 6 or more months of use.

  The unit refuses to print, declaring "print cartridge problem: [Tri-Color] refer to device Documentation to troubleshoot."  Nothing in the help documentation.  The Habs is always 90% full.  Sometimes pulling the Habs and placing back in crazy wil it restarting.  When it restarts, it prints perfectly.

  I tried the ubiquitous "clean the contacts" and other instructions help generic that I saw, but those who were without help.  The "Solution Center (Yes, good)" appears and all ithas is a link to buy more ink (!).

  Someone has an idea?  I'm about to throw it through the window of stores office, given that I can't throw it out the window of HP.

  Thank you!

  Yes * I know * and I'm sorry that I forgot to come back here.  I had a major system crash and I had to reinstall a lot of drivers for my multimedia player, GPS, and printer (!).  As this occurs, the device did not return this error - touch wood.

• Printing printer F2480 problem

  Hello

  I am using HP Deskjet F2480 and problem on printing. I used the HP Print and Scan Doctor 4.6 software to diagnose the problem.

  The printing result is as below:

  

  The words, black gradient and the black lines are having to "shadow".

  I hope someone can guide me how to solve this problem.

  Thank you.

  Hi @noname9,

  Welcome to the HP Forums!

  I see that the words, black gradient and black lines have a 'ghost' with your HP Deskjet F2480 effect. I'm happy to help you!

  I suggest to go through the steps in this guide, HP Deskjet F2400 all-in-One Printer Series - troubleshooting print quality problems.

  I hope it's useful!