Print spooler keeps stopping after Windows updates

Similar Questions

• Windows 7 print spooler keeps stopping

  Windows 7 preinstalled Dell.  Two printers installed on the system (HPLaserJet1300 and Scanner/printer Dell 922).  Both printers worked well for ~1.5 months.  Suddenly, print spooler continues to stop.  I can't remove printer drivers to try to reinstall.  I tried to restart the spooler of the Panel of the system, but no change.

  I also tried sfc/scannow, requested by the other topics in the forum.  Results showed something about printer files is damaged and cannot fix.  (at this point, I'm over my head)

  Please notify.

  THX.

  First give you property and a full access to c:\windows\system32\spoolsv.exe

  Then run cmd as administrator and run this command: del /Q C:\WINDOWS\system32\spool\PRINTERS\*.*

• Lexmark x 5470 print spooler keeps stopping

  Everything was fine until last week.  For some reason, I can print is no longer in Vista.  He kept coming up with an error message that the spooler of sprint has stopped running.  I would like to restart the spooler, but within seconds it would stop.  I found a few articles on this problem & tried many fixs.  None worked.  I tried uninstalling the Lexmark x 5470 printer and reload the driver.  After doing this, I tried to reload the driver from the Lexmark website, but when he tried to install the printer, he couldn't find / contact him.  I tried following the dirtections unplug & plug but nothing has helped.  I then looked at the print spooler, and again, it has been stopped.  Any ideas what's happening?

  HP has its own update that I think could be the cause.

  Try the Mr. Fixits here:

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  Difficulty is to follow the advice of James and then uninstall - reboot - and re - install your printer.
  Before you uninstall the printer double click on it and delete all pending tasks.

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/ Rob - bicycle - Mark Twain said it is good.

• My print spooler keeps stopping

  I have a toshiba e-studios 452 series, and we can not print. The print spooler stops. I started it again in the command prompt, only to have him leave again seconds later. I erased the computers and re-installed the operating system, but the problem is still there. I have 31 vista computers connected to a server, windows server 2003, and the printer is connected via the network.

  Hello

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Network printer not connecting not after Windows update.

  Vista.  Network printer does not connect after an automatic update of windows unknown.  However, requested document printing to a printer wireless unselected, connected to the same network, if the wireless printer is activated.

  Not having received a response to my follow-up question/information, I decided to "Just Do It" on mine.

  I deleted the printer listed as the wireless HP6300 and added back, once again as a network printer.  Not "Uninstall".  (I did on each computer using this printer.  Everything worked perfectly.  Both printers still coexist on the same network and works perfectly.

  As far as I know that something like an update of Windows, change the IP address of the "network printer" at the same IP address as my printer 'Wireless '.  When I deleted and added the HP6300, he returned with the correct IP address.  If anyone has another explanation, I'd be interested to hear.  This problem has also affected two of my friends systems.

  Marcofun

• Desktop Background slideshow is stopped after Windows Update

  I have my computer and automatic updates from Microsoft. I received a number of Microsoft updates on 14/02/13. After the reboot, the background slide show feature has stopped working. The background alone, that I can use now is a solid color. If I select a single image or images and save the value, the background does not change. The bottom icon temporarily shows a slide show and then switch back to solid in seconds by itself. It was working fine before the update. Once I connected after the reboot, the bottom just went blue. I tried all different background options and the only one that works are solid colors. I can change the color scheme, but can't get images to display. How the background slide show to work after Microsoft updates? Y at - there an update I can remove it to restore the function?

  I was able to fix the problem by replacing the "TranscodedWallpaper.jpg" file and clear the contents of the file "slideshow.ini" in my... Directory of \AppData\Roaming\Microsoft\Windows\Themes. Not sure that is actually solved the problem. I deleted the "TranscodedWallpaper.jpg" file and replaced with an image file. I selected all (cntl-a) in the ini file, even if it looked empty, delete the entire contents and saved. Then I closed all Windows Explorer Windows and the background went to the image. Then I was able to pick my theme with background transitions and it worked.

  Obviously, updates of windows which took place on 14/02/13 caused one or more of these files to become corrupted.

  I hope this helps someone else.

• Satellite click Mini L9W - B touchscreen stops after Windows update

  Hello

  After a series of windows updates were installed today (July 15) on my Mini click the touch screen no longer works. Uninstall the updates, brought the touch screen to life. If anyone has had this problem and, if so, find out what update caused the problem?

  Mac.: I just fixed it by restarting the Tablet two times.

  Good news!

  But in case this will not work for others, you can use the Windows Backup & Restore to set the operating system to the point of early time (prior to the installation of the update)
  After each update of MS, Windows creates new clean restore points

• Internet and the printer works do not after windows update

  Windows xp, mcafee internet security

  Recently, I ran a windows update and leave my computer turned off.  When you turn it on, the were (are) of the internet and the printer does not.  I went into Device Manager via Control Panel to see if I could turn them on and there is nothing pulling up in the Device Manager.  All documents and are accessible, but I can't even start a new internet connection and cannot print.   I am currently using another computer (more modern) in another room.  I even tried the SafeMode (f8 in the middle) from the model and go to Device Manager and nothing was there.  I just tried to go through the f8 option and beginning to a previous state that worked and I have the same result...  Everything is saved on that on a 350g portable hard drive.  It would just be easier to wipe the hard drive and start over? If so how would I do this reformatting?  Thanks for any advice.

  Michael

  Hello MikeKloss,

  Before you destroy by formatting the hard drive on your computer, I suggest that you do a restore of the system on the computer by choosing a restore point when it was working fine. You can check the link that will give you information about how to restore the system on the computer below:

  http://support.Microsoft.com/kb/306084

• BSOD error codes and stop after windows update

  Hi all.  I have a computer dell laptop, inspiron e1505. 2 days ago, he did a system update and then restarts are not at all. If I start windows normally or start with the last known good configuration I get the BSOD and stop error codes, 0x0000007e, 0 x 80000003, 0x805c370c, 0xf79e02b4, 0xf79dffb0.
  If I try to any safe mode, it begins to go through a list of drivers then stops briefly and goes to a blue screen Uni with no writing at all.   It's beyond what I know how to fix.  Thanks for your time

  Kb971486 uninstalled by using the recovery console, works again.

• Printer Spooler service turns off - Windows 7

  Hi guys.

  After trying and trying several solutions online to resolve Printer Spooler service, still me have the same problem.
  The spooler goes off in a split second, as soon as I turn it on.

  Ive tried to delete all printers.
  Also there isn't any "Printers" folder in the following directory: c:\Windows\System32\spool

  I got the report of accident for you to source: C:\ProgramData\Microsoft\Windows\WER\ReportArchive

  Please indicate how I can solve the problem of spooler and let it run?

  'Version = 1 '.
  EventType = APPCRASH
  EventTime = 130201389863919618
  ReportType = 2
  Consent = 1
  UploadTime = 130201389889851101
  ReportIdentifier = a5bf9ca2-fd6c-11e2-910f-88532e4161ca
  IntegratorReportIdentifier = a5bf9ca1-fd6c-11e2-910f-88532e4161ca
  Response.BucketId = 62923011
  Response.BucketTable = 4
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = spoolsv.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.1.7601.17777
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 4f35fc1d
  GIS [3]. Name = name of the Module fault
  GIS [3]. Value = HpTcpMon.dll
  GIS [4]. Name = Fault Module Version
  GIS [4]. Value = 7.2.5.51
  GIS [5]. Name = Fault Module Timestamp
  GIS [5]. Value = 4ab0e4d3
  GIS [6]. Name = Exception Code
  GIS [6]. Value = c0000005
  GIS [7]. Name = offset of the Exception
  GIS [7]. Value = 000000000000ad75
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.1.7601.2.1.0.768.3
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1033
  DynamicSig [22]. Name = additional Information 1
  DynamicSig [22]. Value = df36
  DynamicSig [23]. Name = additional Information 2
  DynamicSig [23]. Value = df36e0b278c770807cefd993fac9d654
  DynamicSig [24]. Name = additional Information 3
  DynamicSig [24]. Value = a612
  DynamicSig [25]. Name = additional Information 4
  DynamicSig [25]. Value = a612b538cec9db3725c9e02da3121443
  UI[2]=C:\windows\System32\spoolsv.exe
  UI [3] = Spooler SubSystem App stopped working
  UI [4] = Windows can check online for a solution to the problem.
  UI [5] = check online for a solution (recommended)
  UI [6] = check for a solution later (recommended)
  UI [7] = close
  UI [8] = Spooler SubSystem App stopped working and was closed
  UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
  UI [10] = & close
  LoadedModule[0]=C:\windows\System32\spoolsv.exe
  LoadedModule[1]=C:\windows\SYSTEM32\ntdll.dll
  LoadedModule[2]=C:\windows\system32\kernel32.dll
  LoadedModule[3]=C:\windows\system32\KERNELBASE.dll
  LoadedModule[4]=C:\windows\system32\msvcrt.dll
  LoadedModule[5]=C:\windows\SYSTEM32\sechost.dll
  LoadedModule[6]=C:\windows\system32\RPCRT4.dll
  LoadedModule[7]=C:\windows\system32\USER32.dll
  LoadedModule[8]=C:\windows\system32\GDI32.dll
  LoadedModule[9]=C:\windows\system32\LPK.dll
  LoadedModule[10]=C:\windows\system32\USP10.dll
  LoadedModule[11]=C:\windows\System32\POWRPROF.dll
  LoadedModule[12]=C:\windows\system32\SETUPAPI.dll
  LoadedModule[13]=C:\windows\system32\CFGMGR32.dll
  LoadedModule[14]=C:\windows\system32\ADVAPI32.dll
  LoadedModule[15]=C:\windows\system32\OLEAUT32.dll
  LoadedModule[16]=C:\windows\system32\ole32.dll
  LoadedModule[17]=C:\windows\system32\DEVOBJ.dll
  LoadedModule[18]=C:\windows\System32\DNSAPI.dll
  LoadedModule[19]=C:\windows\system32\WS2_32.dll
  LoadedModule[20]=C:\windows\system32\NSI.dll
  LoadedModule [21] = C:\windows\system32\IMM32. DLL
  LoadedModule[22]=C:\windows\system32\MSCTF.dll
  LoadedModule[23]=C:\windows\system32\nvinitx.dll
  LoadedModule[24]=C:\windows\System32\CRYPTBASE.dll
  LoadedModule[25]=C:\windows\System32\slc.dll
  LoadedModule[26]=C:\windows\System32\RpcRtRemote.dll
  LoadedModule[27]=C:\windows\System32\secur32.dll
  LoadedModule [28] = C:\windows\System32\SSPICLI. DLL
  LoadedModule[29]=C:\windows\System32\credssp.dll
  LoadedModule [30] = C:\windows\System32\IPHLPAPI. DLL
  LoadedModule [31] = C:\windows\System32\WINNSI. DLL
  LoadedModule[32]=C:\windows\system32\mswsock.dll
  LoadedModule[33]=C:\windows\System32\wshtcpip.dll
  LoadedModule[34]=C:\windows\System32\wship6.dll
  LoadedModule [35] = c: Files\Microsoft Shared WLIDNSP. DLL
  LoadedModule [36] = C:\windows\system32\PSAPI. DLL
  LoadedModule[37]=C:\windows\system32\SHLWAPI.dll
  LoadedModule [38] = C:\Program Files\Bonjour\mdnsNSP.dll
  LoadedModule[39]=C:\windows\System32\rasadhlp.dll
  LoadedModule[40]=C:\windows\System32\fwpuclnt.dll
  LoadedModule[41]=C:\windows\system32\CLBCatQ.DLL
  LoadedModule[42]=C:\Windows\system32\umb.dll
  LoadedModule [43] = to C:\Windows\system32\ATL. DLL
  LoadedModule[44]=C:\windows\system32\WINTRUST.dll
  LoadedModule[45]=C:\windows\system32\CRYPT32.dll
  LoadedModule[46]=C:\windows\system32\MSASN1.dll
  LoadedModule[47]=C:\windows\System32\localspl.dll
  LoadedModule [48] = C:\windows\System32\SPOOLSS. DLL
  LoadedModule[49]=C:\windows\System32\srvcli.dll
  LoadedModule[50]=C:\windows\system32\winspool.drv
  LoadedModule[51]=C:\windows\System32\PrintIsolationProxy.dll
  LoadedModule[52]=C:\windows\System32\HpTcpMon.dll
  LoadedModule[53]=C:\windows\System32\HPTcpMUI.dll
  LoadedModule[54]=C:\windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_a4d6a923711520a9\COMCTL32.dll
  LoadedModule[55]=C:\windows\System32\hpzjrd01.dll
  LoadedModule[56]=C:\windows\System32\hptcpmib.dll
  LoadedModule[57]=C:\windows\System32\mgmtapi.dll
  LoadedModule[58]=C:\windows\System32\snmpapi.dll
  LoadedModule[59]=C:\windows\System32\wsnmp32.dll
  State [0]. Key = transport. DoneStage1
  State [0]. Value = 1
  FriendlyEventName = Stopped Working
  ConsentKey = APPCRASH
  AppName = Spooler SubSystem App
  AppPath=C:\windows\System32\spoolsv.exe ".

  Hi Marius,.

  As you mentioned that you are unable to find the folder of spool, check if spoolsv.exe is present under C:\Windows\System32.

  Follow these tips and check if that helps.

  Method 1: Run the built-in printer Troubleshooter and check if that helps.
  Open utility troubleshooting printer

  Method 2: I suggest you refer to the suggestion of Gokul T responded on November 6, 2009, for a similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-print-spooler-will-not-start/79938f9a-34b2-4ddf-8101-e20f7fa9c2d0

  You can also consult about it and see the advice given by Freak05, Tuesday, July 27, 2010.

  Print spooler keeps stopping on Windows 7

  http://social.technet.Microsoft.com/forums/Windows/en-us/fd7f46d3-Baa1-4a38-9AD3-dec5426d9297/print-spooler-keeps-stopping-on-Windows-7

  Reference: why I can not print

  Follow the suggestions in the thread and let us know the results.

• Windows 2003 terminal server print spooler service stops frequently

  Windows 2003 terminal server print spooler service stops frequently

  Hello Vijay Bedre,

  Thanks for your post.  Please ask your question in the forum of Remote Desktop Services TechNet as they manage all the server related issues.

  See you soon

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• Print Spooler service stops still.

  I am facing a very grim situation, because of the Vista PCs always Printer Spooler service stops. After stopping these services all usury priters hidden and I can't add a printer. Aftet I I restart manually from the services but a few seconds it stops. I got this page from Vista PC. Can anynoe help me to overcome this problem?

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• Wireless printer will not install. Rpet print spooler service stopped.

  Original title: Print Spooler Service.

  I am trying to install a wireless printer, and he goes on to say that the print spooler service stopped stop. How can I fix this problem?

  Hi Gaynell,

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Reference: http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/print-spooler-service-not-working/ca5d0119-927a-e011-9b4b-68b599b31bf5

• HP Laserjet M1522 nf - cannot install the driver (print spooler is stopped)

  -installed driver using the installation disc, but when I tried to add the printer to the wireless network, all THE existing definitions of the printer disappeared and print spooler has stopped. I restart the spooler, but when I try to install the driver, the error message says "cannot install printer - Print Spooler App stopped. Please start the spooler or restart the computer. ") Operating system Vista).  I've upgraded to Windows 7, but the problem persists.

  So is the printer connected to the router or you are going through the router to a shared printer on another computer.

  Whatever it is, the printer driver must be executed in the process of printisolationhost rather than the spoolsv process if the spooler will not process that is corrupting the print driver.

  When you have Pro and Ultimate is easy.  If you have home made me know if gpedit.msc launches Group Policy Editor.

  For Pro and home run printmanagement.msc

  Drivers, find the 1522, right click, pilot of isolation, isolated

  Now, start the spooler service.  Since the driver does not work, you must remove it by using any HP software used to install the driver.  Normally in the programs, you can find the installation of HP and select uninstall.  Reset.  HP.com head, pick up the HP driver published last month and start again

  version 4.3

  4.3 March 23, 2010

  220,7

  March 23, 2010
  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1