Print Spooler service is not running (could not install printer) hp photosmart wireless with

Similar Questions

• Operation could not be performed. The print spooler service is not running

  I get the error message "operation could not be performed. The print spooler service is not running. "How to start the service on Windows xp print spooler?

  Click Start--->run---> Type ' services.msc"--->OK and scroll down to print spooler entry and right-click, select Properties, set Startup type and in"service status", click the button to start the service."

  Good luck.

• Error message-""could not be achieved. " "The print spooler service is not running.

  Can anyone help. Whenever I try to print, I get a message that I need to add a printer, even if I have a printer installed. When I click Yes I Mindprint an another error box saying 'operation could not be performed. The print spooler service is not running"could someone advise how to solve this.

  Thanks in advance

  Matt

  Hello

  ·        Have you tried the steps that are listed in the article manually and see if the problem is resolved?

  ·        Who is the manufacturer of the printer and what is the model?

  ·        When did you get the error message when you try to install the printer or when you try to print?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to check if the Printer Spooler service is started.

  a. Click Start and click Run.

  b. type services.msc in the box run.

  c. find the print spooler service and right click on it.

  d. click Properties and verify that the startup type is set to automatic.

  Method 2:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  C:\Windows\System32\Spool\Printers

  C:\Windows\System32\Spool\Drivers\w32x86

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Print Spooler service is not running

  I'm trying to re - install my printer, but I get a message that says "operation could not be performed. Print Spooler service is not running.

  Hi pyq718,

  Follow the steps below to check the print spooler.

  1. type services.msc in run (XP) or search programs and files (Win 7 and Vista)

  2. click on the (local) Service

  3. scroll down until you get to the print spooler, and then click on it once to select it.

  4. in the top left corner, you can stop and then start the spooler to make sure it is running.

  

• When you try to add a printer, get error Printer Spooler service is not running

  I lost my printer and when I click Add printer, I get the message of this operation could not be completed. The print spooler service is not running. Then, the computer detects the new hardware and says the RPC server is unavailable can help?

  Check the status of 'Print spooler' & RPC (remote Procedure Call) services in the services window. You can check the link below to change the status of the services.

  http://TechNet.Microsoft.com/en-us/library/cc736564%28WS.10%29.aspx

  After the services start, delete all previous printers. Uninstall the drivers and then try to reinstall the printer again.

  If the problem still persists to the print spooler, you can import the registry across the entry below machine & merge the machine to issue:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  Also check out the link for your RPC unavailable problem:
  http://support.Microsoft.com/kb/242079

  Now, try to restart the print spooler new service & try to install the printer.

  Note: instead of copying files from another machine you can also run the SFC/scannow.

• Get the message that indicates the print spooler service is not running

  Printer to work, cannot get message reads "the print spooler service does not work.

  Hello

  1. could you give us the exact error message?

  Method 1.
  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  Method 2.
  Also, try the methods listed in the section below and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Microsoft.com/kb/308028

  I hope this helps.

  I hope this helps.

• error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or reboot the machine.

  Hello
  After upgrading to windows 7 Home premium 64 bit vista family premium 64-bit, I expected to be able to connect my EPSON Stylus D68 printer on my laptop and leave immediately. However, when I tried to do this installation constantly failed.  Therefore, I went to the manual add the printer option in the menu devices and printers. However I met this error message: "Windows cannot add a printer. The local print spooler service is not running. Please restart the spoiler or restart the machine,"after reviewing the existing forums on the issue, I tried to restart the services option. However, the restart option has been obscured and when I just tried to start then I met an other error message: "windows could not start the spooler on the local computer service, error 1053: service has failed to demand launch or control in a timely. more when I click Properties to the spooler in the description it says failure to read the description. error code: 1813. This is all very frustrating for someone who just wants to add a printer to his laptop computer. can someone please? because I am all of these ideas.
  Thanks in advance,
  Chris.

  Try runing the file system Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer Spooler service is not running.

  I can't find or add a printer. Message says that the Printer Spooler service is not running. I made sure that the service has been started and drivers set to date but still get the message whenever I have select Add a printer. No printer icon appear. XP

  Gerry,
  Thanks for your reply. Just before I got your e-mail, I found this link

  http://forums.techguy.org/Windows-XP/998760-solved-print-spooler-keeps-stopping.html

  I did as suggested that removed a file in HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\CONTROL\PRINT\

  and indeed it has worked.

  Again, thanks for taking your time to look into my problem.

• Print Spooler service is not running and cannot install a new printer

  My print spooler service is not running and the computer will not let me install a new printer. How can I fix it?

  Hi John,.

  What is the number and the model of your printer?

  You can try running the fixit of the printer and check.

  Diagnose and automatically fix problems printing and printer

  You can also consult the following articles and check.

  Printer in Windows problems

  Resources for the resolution of the printer in Windows XP problems

• The print spooler service is not running

  I had a virus that I got rid of but now my printer does not print, it comes up with "the print spooler service is not running" and I can't add a printer.  What should I do to solve this problem.

  It's pretty easy to start the print spooler service... but may not stay started.

  To restart the print spooler:

  • Click Start, click Run, and then type services.msc in the run box, and then click OK
  • Scroll down the list until you get to the print spooler and double-click the entry
  • Make sure that the "Startup Type" is "automatic".
  • Click on the button 'Start '.
  • OK your way out

  In the likely case where this isn't a solution permanent for you, when you post, include the following information:

  1. What version of Windows you have, including the service pack (start > run > winver > OK)
  2. What make and model of printer you have
  3. What antivirus you have installed
  4. If your computer was without an antivirus application or current subscription for your antivirus (in other words, how is it you got infected in the first place)
  5. What steps you have taken to determine that your system is now free of malware (i.e. what applications antivirus and antimalware you scanned the system with)

• Samsung SCX 4200 printer spooler service is not running"error; any attempt to add a local printer

  Samsung SCX 4200 printer spooler service is not running"error; any attempt to add a local printer

  For example, the print spooler runs?

  Type Services.msc in the box run from the start menu and check the parameters print spooler, set it to auto start.

  John

• Local Print Spooler Service is not running...

  I have a HP Officejet pro 8600, which was acquired in may 2014.  The printer has stopped working on the print commands from the PC, which is a HP Pavilion.  I tried several methods, including the closure of all of the network modem, router comouter and printer n restart troubleshooting system.  (It shows an error message that says that it does not connect to the printer to make a print job).  I am connected via ethernet cable to reroute around the wireless network, and it still wouldn't print docs for the PC.  I'm going to print incoming faxes.  I did another thing troubleshooting, and it gave me a message that the "print spooler service does not work."   I also deleted the printer from the control panel and reinstalled the software from the CD provided with the machine.  I will need very detailed instructions if the fix is complicated.  Do not assume that I have "will know how to do this.  Laughing out loud.  Thanks in advance for any help.  This is driving me crazy (more)!  D

  And does also say running under the status column?

  If the status column is empty, don't forget to click on start the Service as stated in my previous post.

  Shlomi

• Windows cannot add printer print spooler service is not running. Even after the spooler service is started I get code error 0x000006be

  I have XPS from Dell with Windows Vista Home premium 32-bit. I'm trying to connect the office jet J4680 HP wireless printer. The printer was working with this PC, but for the last 2 weeks, something has changed and I can't reconnect to the printer. I get the error Printer Spooler service is not running. After I have start the spooler service and try to add a printer, I get an error 0x000006be code

  Hello

  The main problem is caused by corrupted printer drivers, you will need to check with your printer manufacturer for
  Download the latest drivers (just re - install the old ones will probably lead to this error). Make sure that you
  Download for your version of Windows and 32 bit or 65.

  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»
  http://support.Microsoft.com/kb/946394

  ==========================================

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest version of the driver).

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx
  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread - stop and disable the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If no joy:

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.