Printer A940 - hardware error message

Similar Questions

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• HP Envy 4500: Printer not found error message

  Just hooked up this printer to a Mac Mini end of 2012 4 GB of ram, processor 2.5 GHZ of Intel, IOS 10.11.5 I get the error message "printer not found."  Still printer is plugged into the USB port and marked as default printer.  Have to pull plug - n-new power printer, then it works.  Please let know us, I downloaded the drivers did I miss something?

  PS Site Web HP says printer out of warranty in 2015.  For 3 years we have used just like a copier to a company.

  Download and install this: http://support.apple.com/kb/DL907
  
  Then, reset the printing system:
  
  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• iPhoto 09 stopped allowing me to print photos. Error message: "No themes available" "there are no themes located. Until at least a theme has been installed, this feature will be unavailable. »

  iPhoto 09 stopped allowing me to print photos.

  Error message below:

  "No themes available.

  "He has not located themes. Until at least a theme has been installed, this feature will be unavailable. »

  Re - install iPhoto

  1 put the iPhoto.app in the trash (to drag it from the Applications folder to the trash)

  2 download on the App Store to reinstall is on your shopping list * it.

  For older versions that were installed from the disk, you need the following additional steps:

  2a: on 10.5: go to HD/library/receipts and remove any pkg file it with iPhoto in the name.

  2b: on 10.6: these recipes can be found as follows: in the Finder, use the menu go to and select go to folder. In the type of window that results from

  / var/db/receipts /.

  2 c: 10.7 or later, they will be

  / private/var/db/Receipts

  A Finder window opens at this location and you can delete the files pkg of iPhoto.

  3. replace in place.

  If you bought a disc of iLife, iPhoto is then on it.

  If iPhoto has been installed on your Mac, when you go to it then it is on the restore disks from the system provided with your Mac. Insert the first and choose "install Bundled Applications only.

  * Sometimes, iPhoto is not visible on the shopping list. It may be hidden. See this article for more details on how to view it.

  http://support.Apple.com/kb/HT4928

  A question often asked: Will I lose my Photos if I reinstall?

  iPhoto, the application and the iPhoto library are two different parts of the iPhoto program. So, reinstall the application should not affect the library. BUT you should always have a back up before doing this kind of work. Always.

  
  

• All in one printer 5510: old printer at startup error message

  Hi all, I recently upgraded my printer Photosmart 5510 to 5540 desire. I installed a new printer and removed the old. Since then, I get this error message whenever I start the computer:

  There is a problem starting: C:\Program Files\HP\HPPhotosmart5510series\bin\HPStatus BL.dll

  The specific module could not be found

  I tried to reinstall the old printer, I deleted again, I went through HP troubleshooting... nothing!

  Someone has an idea? Thanks for your help.

  Hello
  From file Exploer type %appdata%\Microsoft\Windows\Start Menu\Programs\Startup in the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.

  Kind regards
  Shlomi

• Printer does not print. An error message to add more paper, what I have done.

  Original title:

  Problem of the printer.

  I have a HP Photosmart C5100 series.  When I try to print from the computer, I get an error message to add more paper, what I have done.  I can make a copy without problem.

  Hello

  As you have already tried to add paper but printer still appears the same error message, it is possible that the printer does not detect paper.

  It could be a problem with the printer itself.

  It would be a good idea to contact the manufacturer of the printer to help.

  I hope that helps!

  If you need assistance regarding Windows please keep us informed.

• Can't get my printer to work error message says: communication problem

  printer error message want to work: communication problem

  Contact the manufacturer of the printer.

• Align the PSC 750 printer ink cartridge error message.

  I just replaced only the black cartridge in my printer PSC 750.  (Will replace the color cartridge later as my money allows.) The printer is connected to my laptop, MacBookPro, under OS X, version 10.6 operating system.  After replacing the cartridge, I ran a self-evaluation report.  It seemed to run correctly.  No color cartridge only test model because there is no ink in the cartridge.  Then I ran the process to align the print cartridge which gives an error on the printer.  It displays "error: Align page not detected" when I clearly placed the page alignment on the scanner glass.  Tried this process several times and each time I get this error message.

  Could it happen because I have not yet replaced the color cartridge?  If not, then what?

  Alignment requires the black and cyan (or was it yellow on this model?) part of the color cartridge to print for correct alignment.  If you have an old copy of the alignment page you can use it, although the alignment would be suboptimal.

  Soak the printhead of the cartridge 78 in 1 "hot water for ten minutes and then gently the printhead from drying and put it back in the printer may allow enough ink complete the alignment page.

• install printer Windows XP error message: there is no print processor

  Try to re - install a printer (Knoica/Minolta MC-2300-DL) and installation of the process works fine until you click the final OK... then I get the error message "cannot install the printer.  The print processor does not exist. »

  I used the FIX IT program and because he can't see this printer as installed, is not able to help.

  Hi cjm1219,

  · What is the edition of windows that is installed on the computer?

  · What is the service pack installed?

  If you have installed Windows XP Professional edition, there is a fix that allows you to solve the problem. The fix is included in Windows XP service pack 3.

  Link to the fix: you cannot install a printer that uses a print processor in Windows Server 2003 Server or Windows XP Professional: http://support.microsoft.com/kb/906752

  To install Windows XP service pack 3 access the link below: http://www.microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=en

  If you already have service pack 3 on the computer can see: you receive an error message when you try to use the Add Printer Wizard to add a printer in Windows XP: http://support.microsoft.com/kb/2410007

  With regard to:

  Samhrutha G S - Microsoft technical support.

• would not print because of the configuration of the printer... error message

  1 will not work in any program

  2 error message... cannot print because of the way in which printer is configured

  3. recent changes that I could have done...  I tried a configuration to use a different printer on a home network

  4. between the thing I've tried include the use of MS Fix It center... Use the SHARING Wizard

  Hi reecerecon,

  (1) what is the complete error message you receive?

  (2) how to set up your printer on the network?

  I want to clarify the version\edition of Windows that you are using on the computer.

  Method 1: You can follow the steps mentioned in the link below

  I can't print to a network printer.

  You can check the link below

  To add a network, wireless or Bluetooth printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Jet office pro 8500 does not print Yellow - no error messages and printhead life shows good

  I have an Officejet Pro 8500 A909n Prime that doesn't print Yellow. I have replaced the yellow cartridge twice, cleaned the printheads as well regular and deep cleaning, and I cleaned the contacts on the print head. Current information shows the printhead as good quality. The amount of ink is correct. There has never been no error messages whatsoever. What gives?

  {The content removed}

  Sorry, but none of your suggestions helped. What I suspected at the outset was the printhead and it seems to be what needs to be replaced. HP and print heads are a big problem and I had this problem on previous models of the officejet family. My Canon has been in service for seven or eight years and I have never had a problem with it. I think that if I replace this printer that I might have to consider anything other than HP. Thanks a lot for your help.

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• HP 5535 won't scanner, printer not found error message

  I have a HP Envy 5535. I've only been able to scan with it once. I scanned 22 documents, after HP Scan Doc 4.4 running. Every time the scanning HP Doc says everything is OK, but as soon as I try to do an analysis of test, I get the error message "printer not found." I also tried this scanner with my McAfee virus firewall off the coast, and it still does not work. I have also identified it on McAfee as part of my network.

  Hi @prazdancr,

  Welcome to the HP Forums!

  I'm sorry that you can not scan with your HP Envy 5535, but I'm happy to help you!

  To get help, I'll need to know:

  1. If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  2. If the printer is connected, wireless, or USB.
  3. If the printer is capable of making copies of itself.
  4. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please try go through this guide to scanning. A "the computer is not responding" error message during scanning.

  I hope hear from you soon and have a great day!

• printing, stopped by error message intermittently

  More recently, the impression of the process stops and an error pops up.  "to avoid damage to the close button.  do not use taken to stop. "I've made no attempt to stop and did not part any printer.  I have check all cables and taken - everything is secure.  Some days I can print 100 pages.  The next day, it prints a number of things, and then it's the case - short emails, pages graphics census, everything.

  Hello winspeare,.

  I understand your frustration, and the error message usually only appears after a disconnect as inadequate the back stop, is not off the power before disconnecting the power supply.  Are you plugged into an outlet or a surge protector? I ask because the HP printers have built in surge protector, so connect one can trigger it does not get enough power. Also, what print mode are you using?  Quick project puts the most pressure on the printer power. I found useful information on the Forums HP's Support. Click on the link to see the wire and the solution posted by Bob_Headrick.

  I hope this helps, please let me know if that solves the problem. Hoping to hear from you soon.

  Thank you

• Control Panel / devices and printers, click the printer, get an error message "impossible operation completed (error 0 x 00000005).» Access is denied?

  does anyone know why when I go into Control Panel / devices and printers, I click on the printer I want and you get an error message "impossible operation completed (error 0 x 00000005).» Access is denied? I can't change the owner, or delete or something. Help, please!

  So far, I found all these shapes to be completely useless and a waste of time. I found out how to fix this and it looks like that many people would have put me the answer out there because nobody else will or knows it.

  -Start

  -Explorer window

  -C:\windows\system32\spool\PRINTERS

  And

  -C:\windows\system32\spool\DRIVERS

  -Right click on a folder at a time and select Properties, then on the Security tab and add the user you want to grant access to print and check that the 'Total control' box is checked. If the user name is already there, check the box "total control".

  -Note: Never simply put the group "Everyone" it as it will cause problems if you use a vulnerability scanner.

  It was on a Windows 7 operating system.

  Who should do this; Well it worked for me at least.

  Thanks for nothing, Microsoft and all the people here! ***