would not print because of the configuration of the printer... error message

Similar Questions

• Firefox won't load at all because of the ATL error message

  When I touched the Firefox icon and error message comes to say Uniode error AtL80.DLL and she even try to load because I can not get the error message to close. I have to shut my computer down and when he returns to the top, and then try again., the error message is rear right in the middle of the screen. Do not understand what has happened. Worked great until I got message to update Firefox and tried to install the upgrade.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all.html

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Just BUY streets & trips 2011 but could not be installed because of the C++ error messages

  Virtual machine installed on MacBook. PURCHASED streets & travel 2011. Tried to install Windows XP on the computer virtual screen and get message that more than C++ objects required for installation.  Installation stopped.   Used S & T on my other laptops Windoows. MS support using irritates me anywhere because I can't launch the software of M & S to get the product code. Enter all the codes on the package gets me nowhere on the help screen.

  I don't want to pay $35 for an email response when I bought this software!

  Hi bucket,.

  I suggest to do a reinstall of C++ or update, as you say
  "more C++ articles necessary to install"

  C++ 2010 redistributable

  32-bit (X 86)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555
  64-bit (X 64)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

• HP officejet 4630 could not print error message on screen

  I hope someone can help me,

  Whenever I try to print anything that is more than 1 page in my office or my laptop, the Officejet 4630 printer prints one page and then the part of the second and then I get a message that appears on my monitor saying

  "Printing on HP Officejet series 4630 error the printer couldn't print" and then it gives the name of file or address this point, that I am trying to print.

  I use windows 8 on top of the tower and XP on the desktop

  Thank you for your help in advance.

  ~ O ~

  Hello attaboye,

  Welcome to the HP Forums

  Seeing that you are using a Windows operating system on both computers, please run the HP print and Scan Doctor on each system. If the doctor fails, please let me know where she didn't have and error codes, it can generate.

  I look forward to hear from you.

  Thank you.

• Active IPv6 is not able to implement the HomeGroup error message

  Original title: Homegroup

  I'm trying to set up a homegroup. I get a message that I must have active IPv6 pros do, I have to start solving the problems of the homegroup. Further, it is not even an option to enable IPv6.

  Hello

  Thanks for posting the question on the Microsoft Community Forums.

  According the description, I understand that you are facing one creating problem HomeGroup.

  It could be that some services will be disabled. I suggest you activate services and check.

  Follow the steps to enable the services.

  You need start the following services:

  (a) peer networking grouping

  (b) PNRP Machine Name Publication Service

  Method 1: To start these services, follow these steps:

  (a) click the Windows key + R on the keyboard.

  (b) type Services.msc in the search programs and files, and then press ENTER.

  (c) right-click Peer Networking Grouping, and then click Properties.

  (d) on the general tab, check whether the service is started. If the service is not started, click Start.

  (e) in the startup type list, select automatic.

  (f) click OK.

  (g) repeat steps 1B to 1F to start PNRP Machine Name Publication Service.

  Method 2: Modify a registry key entry to enable IPv6. To do this, follow these steps:

  (a) click the Windows key + R on the keyboard.

  (b) type regedit in the search programs and files, and then press ENTER.

  (c) locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters

  (d) double-click the DisabledComponents registry entry, and then type 0 in the value data box.

  Note If the DisabledComponents registry entry is not present, you must create it. To do this, point to new on the Edit menu, click DWORD value, type DisabledComponents, and press ENTER.

  (e) exit the registry Editorand restart the computer.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Check out the link,

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-in/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-8&V1H=win8tab1&V2H=win7tab1

  The homegroup Windows problems

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  This information should help. If you need help with the homegroup or Windows, thanks for posting. We will be happy to help you.

• How to disable all types or error messages (appcrash, initializing the dll, the material error messages) via regedit (HKCU only)?

  Hello

  I was wondering how to disable all types of error messages on windows (XP/7/8/8.1) through registry through HKCU only.

  I know that I can change on win 7/8

  The HKEY_CURRENT_USER\Software\Microsoft\Windows\Windows error report

  DontShowUI to 1

  and on win xp (is it possible to do this through HKCU instead of HKLM?)

  HKLM\SOFTWARE\Microsoft\PCHealth\ErrorReporting

  ShowUi to 0

  But that doesn't have errors like "The DLL initialization failed", in order to correct these you will need to fix (nothing to do in HKCU)?

  HKLM\SYSTEM\CurrentControlSet\Control\Windows

  ErrorMode in 2

  However, I need all doing just that only through HKCU. Are there other means directly or indirectly disable all sorts of error messages, preferably by HKCU HKLM not?

  Another question, if it is not possible to disable the other error messages, is there a way to make the machine close more quickly, so that the error messages are not shown while the machine stops.

  I tried on XP.

  HKCU\Control Panel\Desktop

  AutoEndTasks 1

  HKCU\Control Panel\Desktop

  HungAppTimeout 0

  HKCU\Control Panel\Desktop

  WaitToKillAppTimeout 0

  It helped a bit but manages the error message is displayed, unless you set

  HKLM\SYSTEM\CurrentControlSet\Control\Windows

  ErrorMode in 2

  but I need to make the changes through HKCU only.

  Hello Mantas,

  Welcome to the Microsoft Community Forum.

  I wish to inform you that Microsoft does not encourage the registry change to disable the display of errors.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forum. It is better you post the same query in the TechNet community. There may be users who have the expertise in this area and could help you.

  Please visit the link below to find a community that will support what ask you:

  TechNet community

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Get the following error on reboot of the computer: Windows did not start because of a configuration of the disk of the computer problem

  Original title: where can I download iso windows xp recovery CD

  I have a file.which damaged boot.ini file later, when I restart it could not start, with the message:
  Windows did not start because of a configuration of the disk of the computer problem.

  Could not read from the selected boot disk. Check the hardware path and startup disk.

  Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
  So I need an iso file XP Recovery.
  I can simply copy the iso files on USB and start with usb?

  Hello

  1. don't you make changes on the computer before this problem?

  First I suggest you try the troubleshooting methods provided in the following article and the check if that resolves this problem.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• When I try to use the Windows updates to and the following error message: Windows update cannot currently check updates, because the service is not running

  have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer

  Original title: update windows

  Solution 1:

  Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  Solution 2:

  You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:

  net stop wuauserv
  regsvr32 %windir%\system32\wups2.dll
  net start wuauserv

  If this does not help, try Microsoft Fix It service to reset your Windows Update components:

  http://support.Microsoft.com/kb/971058/en-us

  I hope this helps.

• Software Bloggie Touch does not work because of the DEP - I can't turn off DEP for this program

  Original title: software Bloggie Touch does not work because of the DEP

  I downloaded the Bloggie Touch (Sony) software, but the function of prevention of execution of data in Windows Vista prevents me from using it. Any suggestions? I contacted Sony and they had me re-download the software on their site, but it did nothing. I tried to reset the DEP to allow the Bloggie software, but he says that the processer wouldn't let me do that. Message: I can not turn off DEP for this program.

  Any help would be appreciated.

  Hello
  the only other thing you can do is to do a Bing search for how to turn off dep.
  There are several options (not recommended by the way)
  b Eddie

• Need help (asap), file will not be opened because of the JS error

  Hello

  After the weekend Animate will not open my project because of the JS error. I backed up normally one has not changed anything in the file js-edge.

  Tomorrow is the presentation of the project an i'm a little freaked out.

  It would be great if someone could solve this problem. Thanks for help.

  Dropbox - animation.zip

  I'm using the last animated version (2015.0)

  Here you go:

  Dropbox - animation

• Cannot print because of the "program error".

  Cannot print photos because of the "program error."

  Printer will print, but no pictures, docs and images (I printed a Fireworks file). I worked on it for HOURS. Please someone help before I go nuts!

  Detail:

  OS: Win 7

  Printer: Epson xp620 new... Epson says that the problem is not theirs. Surprise.

  Have been removed and the preferences file. Apparently it is a common solution.

  Can not find the Photoshop file. Could someone give me a full path in Windows?

  Connection: Wireless.

  Version: Just updated about an hour ago.

  Thank you!

  You suggest to open one of these files and go to the file menu > press the SPACEBAR on the keyboard > click the option Print while holding the space bar

  This will reset the printing preferences for Photoshop.

  If it still does not respond, suggest you to share one of these files, so that we can try to reproduce the problem on our side.