Printer accepts documents, but stops the printing process before printing. Sometimes, it displays the items in the cache when the computer is restarted.

Similar Questions

• HP Officejet 4630 portable printer: HP Officejet 4630 printer does not print until the computer is restarted

  When I send a document to the printer; It shows in the print queue, but does not print.  When I restart my computer, the document will print.

  The same thing happens whenever I have send a document to the printer.  I have a WiFi connection from my laptop to the printer.  The blue icon on the printer lights indicating that plugged.

  Why does only work when the computer is restarted?  I ran the HP Support Assistant, and it does not find the printer; even if the printer seems to find the computer once I restarted the computer.

  It's embarrassing to say and I'm not very technical interest.  Any suggestions will be greatly appreciated.

  Hi @Maggie78

  Thank you for your patience.

  You can try the following:

  Creating a TCP IP port
  
  1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Enter the IP address of the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps!

• Tried to restore to an earlier date, but whenever the computer goes through the process, but ends by saying that he could not make the changes. My system is XP Professional.

  McAfee, updated yesterday, Saturday, and now I have problems. Tried to restore to an earlier date, but whenever the computer goes through the process, but ends by saying that he could not make the changes. My system is XP Professional.

  Hello
  Have you done that you are connected under an administrator account?

• to access the page elements in the document, but outside the page boundaries

  I am also new to indesign in indesign scripting so bear with me and my lack of termonology. I have page elements that are located in the white space in the document, but outside the page limits. I have access to all page elements that are still partially on the page using the myPage.pageItems. However this collection does not include page elements that are not touch to this page. So is there anyway to access page items in the space outside the page?

  So where are OK, you stuck?

  If you have a variable, say, page, it is a particular page, where page.pageItems is all the elements on this page, then page.parent.pageItems will be all the items on the spread, which includes the editing table that surround it.

  Good?

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation.

  Windows Vista Home Basic preinstalled on my Compaq laptop will not accept code provided with the computer installation. HP can't help. Your say talking to HP and HP technicians say they are unable to help him. I'm now using valid XP. HP say that conflict with Vista. Can anyone help?

  original title: VISTA VS. XP

  Your technicians say talk to HP

  Sorry, this is not Microsoft.  This is a public forum from user to user hosted by Microsoft on its servers for the comfort of its clients, and we all here are volunteers.

  You say you use XP.  What is your question?  What do you mean 'conflicts with Vista?

  I suggest recovery discs you order from HP for your computer.  If HP is no longer the issue of stocks you can order such a third of Recovery - Disks.com.  There are several of these companies.  If you are going to use XP, you need to install XP from scratch and this means that you need XP drivers for your brand and model.  If HP has no XP drivers on your computer you must not try to use XP on it.

  Remember that Vista Starter, Home Basic, Home Premium and Ultimate out of Microsoft support on 10 April and there will be more updates, including critical security patches after that date.  Only Vista business and company will continue to receive updates.  You might consider this a good time to upgrade to Windows 7.  You must download and run the Windows Update Advisor once you restored Vista successfully.

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• Why creative Cloud not connect to my account, but rather the computer I use profile?

  Why creative Cloud not connect to my account, but rather the computer I use profile?

  Sign of the cloud and sign in again using your account

• HELP PLEASE! The computer was restarted after a bugcheck.

  I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.

  That's the message in the event viewer:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.

  This is the message that is displayed on windows re-opening after the accident:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFFFFFFFFFFD0
  BCP2: 0000000000000001
  BCP3: FFFFF800016DE0CC
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 272_3

  Files helping to describe the problem:
  C:\Windows\Minidump\030413-8765-01.dmp
  C:\Temp\WER-83783546-0.SysData.XML

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
  answers if this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
  Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  PAGE_FAULT_IN_NONPAGED_AREA parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The referenced memory address
  2	0: Read operation 1: Write operation
  3	Address that referenced memory (if known)
  4	Reserved

  If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.

  Cause

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Resolution

  
  Fix a defective hardware problem: if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  
  Fix a defective system service: disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.

  
  A problem of antivirus software: disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.

  
  Fix a corrupted NTFS volume: run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

  Remarks

  In general, this address is in the released memory or simply not valid.

  This cannot be protected by a try - except Manager - it can only be protected by a probe.

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16)

  Hello Microsoft,

  Nice day!

  Laptop to our head of service stops automatically. I checked with the other posts, some are the same, but can't find the bug error we encounter. Please check the below error code

  The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 23025-071714-01.

  Event ID: 1001

  The dump file is shared on SkyDrive. The URL is

  https://onedrive.live.com/redir?RESID=A21E1CFD1B8F0B96%211092

  Thank you very much!

  Kind regards

  Sidney Mendoza

  Hi Sidney,

  The attached file of the DMP is to bug checking DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  BugCheck D1, {18, 2, 1, fffff88005254d16}

  Argument 1 is 0000000000000018 indicating completely invalid memory was referenced. We don't even need check, we can tell just by looking at her that he isn't a valid address in any way.

  3: kd > k
  Call child-SP RetAddr site
  fffff880'031fd608 fffff800'034 d 7169 nt! KeBugCheckEx
  fffff880 '031fd610 fffff800' 034d5de0 nt! KiBugCheckDispatch + 0 x 69
  fffff880'031fd750 fffff880'05254 d 16 nt! KiPageFault + 0 x 260
  fffff880'031fd8e0 fffff880'05257722 athrx + 0x18d16
  fffff880 '031fd930 fffff880' 05256cac of the athrx + 0x1b722
  fffff880 '031fd9c0 fffff880' 052ddb8b of the athrx + 0x1acac
  fffff880 '031fda00 fffff880' 052e4d61 of the athrx + 0xa1b8b
  fffff880 '031fda30 fffff880' 052634 to 7 the athrx + 0xa8d61
  fffff880 '031fda90 fffff880' 0523d9fa of the athrx + 0x274a7
  fffff880 '031fdac0 fffff880' 016ae9b6 of the athrx + 0x19fa
  fffff880 '031fdb00 fffff800' 034e230c ndis! ndisInterruptDpc + 0x1b6
  fffff880 '031fdb90 fffff800' 034cf8ca nt! KiRetireDpcList + 0x1bc
  fffff880'031fdc40 00000000 00000000' nt! KiIdleLoop + 0x5a

  We can see the pilot who attempted to access invalid memory was athrx.sys , which is the Atheros network card driver.

  3: kd > .trap fffff880'031fd750
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  rbx Rax = 0000000000000000 = 0000000000000000 rcx = fffffa8006a01030
  RDX = fffffa8006be3440 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88005254d16 rsp = fffff880031fd8e0 rbp = 0000000000000000
  R8 = 0000000000013601 r9 = 0000000000000000 r10 = fffff80003462000
  R11 = 0000000000000000 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei ng nz na po nc
  athrx + 0x18d16:
  fffff880'd 05254 16 c7401800000000 mov dword ptr [rax + 18 h], 0'00000018 ds:00000000 is?

  We can see on the statement, we do not have, we didn't move a pointer in the rax register. Rax sucks because of all the x 64 non volatile registers are regarded as garbage, as well as their context is not registered in the hotpath kernel.

  ----------------------------

  1. make sure that all the network drivers (especially Atheros) are up-to-date.

  2 remove and reinstall McAfee with Microsoft Security Essentials for purposes of troubleshooting temporary, as it may very well cause conflicts NETBIOS:

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  MSE- http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0).

  Original title: windows 7 starts more than 18 minutes take it please help

  It's a copy of errors

  Log name: System

  Source: Microsoft-Windows-WER-SystemErrorReporting

  Date: 03/10/2012 09:19:24

  Event ID: 1001

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: iqraa

  Description:

  The computer was restarted after a bugcheck.  The bugcheck was: 0x000000f4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 100312-800425-01.

  The event XML:

   

     

      1001

      0

      2

      0

      0

      0 x 80000000000000

     

      5848

     

     

      System

      IQRAA

     

   

   

      0x000000F4 (0 x 00000003, 0x8ba289b8, 0x8ba28b24, 0x82c63df0)

      C:\Windows\MEMORY. DMP

      100312-800425-01

   
  Hello
   
  Did you of recent changes to the computer before the show?
   
  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION: This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.
   

  Refer to this link: http://msdn.microsoft.com/en-us/library/ff560372%28VS.85%29.aspx

  Question: Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  In order to solve the problem in a better way, one must look the discharges with the debugging tools for Windows.

  Please, start Windows Explorer and navigate to the C:\Windows\Minidump folder. Then, copy the files to your desktop, zip dmp dmp all in one zip archive and download the zipfile to your SkyDrive folder [1] public and post a link here.

  If you do not see the dmp files, make sure that your Windows is correctly configured to generate shocks.

  See this link for more information.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  http://support.Microsoft.com/kb/254649

  I would recommend also refer to this article for more information and troubleshooting on blue screen errors.

  Resolve stop (blue screen) errors in Windows 7:   http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

• Lenovo u310, when raid enable the computer is restart auto

  Hello

  I have lenovo u310, when raid is activating the computer is restart auto

  and cannot take the step to enter in the configuration, very fast often resetting.

  but when I get home IM disconnect the hard drive I can enter in setup and change comptiable RAID, then im trying to boot blue screen and pc windows it reboot auto.

  What is the problem?

  Thank you.

  OK this is what I've done, raid is not possible, I don't know why...

  so I put on compatible and install a fresh Windows 7 from a usb flash drive and it will solve the problem.

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.