Printer cuts the bottom line

Similar Questions

• HP Officejet Pro 8620: Im a line is printed to the bottom of each page I copy via adf, including analyses

  Everything I insert through the adf comes out with a dark line printed to the bottom of the page, including pages that are being analyzed?

  This is caused by a specification on the thin piece of glass to the left of the main bed.  Clean this area, it will solve the problem.  It can help to use a strong flashlight which is held parallel to the glass to highlight the area that needs to be cleaned.

• DeskJet 3755: 3755 DeskJet cut the bottom of the PAge

  When I print PDFs online, my printer always cut the bottom of my page. When I print a PDF from adobe, I am able to print the whole page without it cutting off the coast, but with a hateful tab of space between the end of the document and the bottom of the page. I don't want this extra space at the bottom of my documents. How can I get rid of this? I use 8.5 x 11 paper and my printer is set on letter-sized paper. I don't want that extra 1/2 inch space.

  Hello

  It is a limitation of the hardware, according to the list of its specifications:

  http://support.HP.com/us-en/product/HP-DeskJet-3700-all-in-one-printer-series/8954253/model/11262035/document/c05046448/

  See the paper output > margins print, is 12.7 mm (0.5 in.) minimum lower margins which cannot exceed the pritner.

  Kind regards

  Shlomi

• Printer cuts the last sentence of PDF pages

  Whenever I print a PDF document, the printer cuts the sentences at the bottom and at the top of each page. I can't read the last sentence on the page because only half superior of the letters on the page and print next oly the bottom half of the printing letters.

  Can anyone help?

  Thank you

  Mike

  The print dialog can have an option titled something like "reduced to fit page."

• I want the date and time to stop printing on the bottom of my print outs

  The date and time printed at the bottom of print all. It doesn't matter if it's Firefox, IE, my emails, or even a word document. I tried to remove the header/footer, but because it prints on everything and everything I print, I think it might be a desktop definition...? I am running Windows 7. Help, please.

  Can go you to your devices and printers on your Start Menu and check your settings in your printer? You're right, it could simply be that a bizarre is activated he forced a timestamp on all your printing.

• Somehow ive typed a button which cut the bottom half off screen

  Somehow ive typed a button which cut the bottom half off screen

  Hello

  1. What is the operating system installed on your computer?

  Please provide us with the screenshot of the issue in order to better help you.

  Click on the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Try to restore the system to the date and time when the screen was working fine.

  Use the links below.

  For Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  For Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  For Windows XP

  http://support.Microsoft.com/kb/306084

• My printer cuts the left edge of all documents

  My canon printer cuts the first 2 or 3 digits on the left side of all the documents and he has right since... a little over a year ago.

  Not much we can do here with a problem like yours. It is more akin to a physical type repair. It looks like your printer heads are out of alignment. What is the model number?

• Printing images inserted on Windows 2003 with some of the top printed at the bottom

  The printer is a Photosmart D7560. Images inserted into a Word 2003 document were still part of the top (which seems to vary) printed at the bottom of the image, despite the Preview Print shows images correctly. The text above and below the pictures will print correctly. Document prints correctly on a Canon i850 printer.

  Ok. I lowered my butt and try the HP Deskjet 450 driver first. He wouldn't do anything. I then tried the 990 c driver and here, the photos printed OK.  So, I conclude that the programmer who made D7560 h driver was working Monday after a 3-day weekend. But this is a good interim solution. I doubt if HP will repair the driver D7560 h, but at least I don't have to rely on the Canon i850, if she should die an untimely death.

  Thank you!

• text does not print on the bottom of the page

  text in black does not print on the bottom

  Hello

  First, try a hard reset with the printer.

  Hard Reset:

  Unplug the power cord from the printer and the wall

  Take out the toner cartridges.

  Wait for 30 seconds

  Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)

  Replace the toners/cartridges in the printer

  Let me know the results

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA

• C6280 sometimes cut the last line of text

  I was not able to understand this one... I do not get a margin in Word printing error, but the last line of text, even in the middle of a page the low 80% of it has failed.  It's as if the printer thinks it has reached a limit of impression, but this is no the case near the edge of the paper.  It is not just a problem with Word.  I was using Memorex, software for labeling this morning, and it's the same thing.  In this case, the omission was near the edge of the CD label stamped, but it was far from the edge of the paper.  Any help with this would be appreciated.

  It worked for me:

  1. go into your printers folder, right click on the connected network printer that you experience the problem with and select "Properties".

  2. when the Properties window opens, click the "Ports" tab

  3. at the bottom of the tab window Ports is a check box "Enable bidirectional support", uncheck the box and click 'OK '.

  now print something where you have already encountered the problem.   I think this might work for some users.

• Epson LX 300 II matrix printer cuts the last digits when printing an invoice

  When you print an invoice it cuts the last digit in the column cents... like $145,2 instead of $145,25.  How can I fix?

  Hello

  -Did you change on your computer before the show?
  -What operating system is installed on your computer?

  It seems that there is a problem with the settings of the printer. I suggest to make a few changes in the settings of the printer or contact Epson support.

  Also, make sure that you have the latest printer drivers for your printer.
  http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly (Assuming you are using Windows 7).

• I had just installed Windows 7. I always play Scrabble on Pogo games but now the screen is too big and it cuts the bottom of the screen in the game and I see not the letters I have haveto choose. Any suggestions please.

  Suggestions as to how I can get the screen is smaller.  I also play hearts, spades and crib.  These screens are also too big, but it is not cut off from the important things.

  Hi Rangerlone88,

  Welcome to the Microsoft Answers site!

  Do you get the display only problem with the games online, or also on the desktop?

  What browser do you use to go online?

  If you use Internet Explorer, you can check the level of zoom in the bottom right of the screen and set it to your liking.

  You can also try to optimize Internet Explorer.

  1. Open Internet Explorer.
  2. Click Security, and then click delete browsing history.
  3. In delete the browsing history area, click Remove.

  A progress bar is displayed to indicate that the browsing history is currently disabled. Once this process is complete, test Internet Explorer to verify that it works correctly.

  To learn more about optimizing Internet Explorer, follow the link.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer HP Photosmart all-in-one, the box of Windows 7 lost my status of the printer at the bottom on the right

  Lost the small box at the bottom right which shows when printing to the printer.  When I send a job to the printer, it prints OK, but recently after some other printer problems (need new ink cartridge), the small boxdoes not displayed.  Because the printer is in another room, it's a good feature to have the work.

  Any suggestions?

  Hello

  Please try:

  Click Start > devices and printers.
  Click Print Server properties (in the box "toolbar" above the list of devices).
  Click the Advanced tab.
  In a local printing: check "Show notifications of information for local printers.

  Kind regards.

• Photoshop, cut the bottom of the windows

  Hello

  I've updated photoshop on Windows 10, and is not cut off the bottom of the windows. First of all, the entire UI was too big, so I changed the size preference 'auto' to '100% ' and user interface seemed to match my PC display ratio. However, the windows are still far too great. I tried almost all sizes display windows. I tried deleting the preference files, uninstall, delete everything left behind photoshop and reinstall. I feel I have tried everything. I've attached a screenshot of what happens. Thanks for your help.

  

  Ok thank you. Back to 100%

  I need to determine which is the native setting of your monitor, so please let me know the model of your PC.

  The other thing maybe the drivers for your graphics card. They may need to be updated, so definitely get the latest version of the site of the manufacturer of the GPU,

  Upgrade display drivers:

  Windows OS

  1. click on start.

  2. on the start menu, click Run.

  3. in the Open box, type "dxdiag" (without the quotation marks), and then click OK.

  4. the DirectX Diagnostic tool opens. Click the view tab.

  5. on the view tab, information about your graphics card are indicated in the Device section. You can see the name of your card, as well as the way in which a lot of video memory, there.

  Once you know the kind of graphics card you have, visit the manufacturer's Web site to download the latest version of the driver. Here are the links to download the drivers from the manufacturers of most common graphics cards:

  * NVIDIA: http://www.nvidia.com/content/drivers/drivers.asp

  * AMD: http://support.amd.com/en-us/download

  * Intel: http://support.intel.com/support/graphics/