Printer does not print using Vista Home Prem with SP2

Similar Questions

• My computer just watched run so slow & then the message continues to come does not, I use Vista Home Premium 32 bit on a Sony VAIO

  This just started about 2 weeks ago and it starts as soon as I opened my browser and it does matter not what browser I use. I have also a lot of page up latch and do ctrl alt del out of there because it crashes my cursor and we can do it all. I ran Microsoft Security Essentials to search for viruses and it came back clear, I did a disk cleanup and I cleaned my computer with a program I have and none of it helped. So if someone has something they know who can help, I would be very grateful.

  Hello

  No security program finds all so do a thorough check of the malware.

  You say you "cleaned up my computer with a program I have.

  We recommend that you use that you use a registry or a program of cleaning/TuneUP/utilities, because they can do more harm to your any good operating system that they claim to be able to do.

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• ' Spooler Sub System App stopped working and was closed "__MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS.

  ' Spooler Sub System App stopped working and was closed ".
  MS Vista Home Premium with SP2, 4 GB of RAM & 32 bit OS

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Connection to a RAS server, sitting in an evroment of Windows 2003 domain via a VPN using Vista home Prem

  I'm trying to set up a laptop users to connect to our network, they have Vista Home Prem, and everything seems fine until it tries to register to the computer on the network and come up with the following error message
  "Error 720: a connection to the remote computer could not be established."  "You may need to change the network settings for this connection "
  After a long and stressful search I have yet to find a reason for this error pickpocketing and other users connect correctly by using the same VPN settings, but they have Vista Business.
  is there a problem with Vista Home Prem? What can I do to fix this?

  Thank you

  Hi Grantinfotool,

  Welcome to the Microsoft Answers site.

  Virtual private network (VPN) is not supported by Windows Vista Home Premium.

  Sight from the link http://www.microsoft.com/australia/windows/products/windowsvista/editions/default.mspx

  For more information, you can also publish your queries to Microsoft TechNet community.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista home prem (KB967723) sp2 security update does not install and get the error code 80073712

  I tried to fire disableing walls, with work, I get all the way to installation and the i get the error code 80073712

  http://support.Microsoft.com/kb/957310

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712" "»

  Method 1: Run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  Note After running the tool, the Checksur.log file is stored in the following location:

  %SystemRoot%\Logs\CBS

  In a default installation of Windows Vista, is the Windows directory.

  If this method does not resolve the problem, go to method 2.

  Back to top

  Method 2: Install Windows Vista Service Pack 1 if you have not yet installed Windows Vista Service Pack 1 (SP1), visit the Microsoft Download Center and then download and install Service Pack 1. To do this, follow these steps:

  1. Quit all programs, and then click on the following link:
     http://www.Microsoft.com/downloads/details.aspx?FamilyId=f559842a-9c9b-4579-b64a-09146a0ba746&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en)

     Note Click the option to download on the download page, click Save, and then save the download to your desktop. When the download process is complete, click run to install the SP1.

  2. Restart the computer.
  3. Try to download the updates again.

  If you can't always install updates, go to method 3.

  Back to top

  Method 3: Perform a repair of Windows Vista installation when you perform a repair installation, which restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.

  To perform a repair of Windows Vista installation, follow these steps:

  1. Restart the computer.
  2. Insert the Windows Vista DVD into the DVD drive of the computer.

     Note If Windows does not automatically detect the DVD, click on Start, type: \setup.exe in the Search box, and then click configuration in the list programs. Then, click install now.

  3. Click connect to get the latest updates for installation (recommended).
  4. Insert the product key if you are prompted to do so.
  5. Click to accept the Microsoft software license agreement.
  6. On the screen which type of installation you want , click upgrade.
  7. Once the installation is complete, restart the computer, and then try again to install updates.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P200: Screensaver does not start on Vista Home Premium

  Hi people!

  I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

  ChrisB

  Hello

  Can I ask you if you use the Microsoft wireless mouse?
  I discovered that this may affect the functionality of the screensaver on Vista OS.

  Strange!

  Then maybe you should check out this MS article:

  + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
  http://support.Microsoft.com/kb/911895

  Feedback would be appreciated.

• DOES NOT UPDATE MY VISTA HOME PREMIUM

  MY VISTA HOME PREMIUM 32 BIT DOES NOT UPDATE AND I KEEP GETTING THIS ERROR 80073712 CODE.
  "PLEASE HELP ME"!

  http://support.Microsoft.com/kb/957310

  Above is resolution of Microsoft to your error Code.

  But it is perhaps not very simple to fix.

  1. try Method 1 to above website. Run (Checksur.exe) system update readiness tool

  2. do you have Service Pack 1 installed Vistra?

  Method 2 is in the list.

  3. method 3 is to do a Vista repair install.

  You need good Vista disc to do this.

  4. If none of the works above, you need to reinstall Vista, using either the recovery disk/s or the recovery partition.

  Save all data before you do, because it will be lost when reinstalling.

  Good luck with it.

  See you soon. Mick Murphy - Microsoft partner

• DVD drive does not work in Vista Home Premium

  This is a fairly new computer with Vista Home Premium and the DVD player has never worked and HP the manufacturer can't help me.  It seems that something is missing as a decoder I thought to be a part of Vista

  Hi ck111000,

  Thank you for using Vista answers Forum.

  Fact the show drive upward in the 'Computer' window (start > computer)?
  Are you an error you may post in this forum?

  Here is an article that your problem:

  "Your CD or DVD drive is missing or is not recognized by Windows or other programs"

  http://support.Microsoft.com/default.aspx/KB/314060

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sony Vaio VGN FZ410E motion eye camera does not work in Vista Home after recovery disk.

  Hello

  I had to use the CD for my laptop recovery after a virus problem and not now camera motion eye! I downloaded the portable Vaio utilities and drivers, but not still camera motion eye. Device Manager does not see the webcam. Help, please!

  Thank you all very much.

  Hello Andrea,

  Please, try the following troubleshooting steps from the link below.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/31634/c/65%2C66/kW/31634

  Kind regards

  Charlie

• just bought a lexmark s505 printer, does not connect to vista Home premium assistance required please

  can someone give advise please

  Have you followed the guide to use during the installation of the unit: http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_INTUITION_S505&segment=SUPPORT&userlocale=EN_US&frompage=null#2

  Most but not all multi function printer/scanner requires that the software is installed before you actually connect the printer.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• My mouse keeps cursor reset its position - it is extremely annoying! Anyone know if there is a fix for this? I am using Vista home edition with a laptop.

  I turned off the touchpad that I prefer to use a connected usb mouse but the problem persists.  Its really annoying when you're gaming and the cursor suddenly resets position and you click on something totally inappropriate.  Any help gratefully received.

  Hello DaztheWanderer,

  Have you tried another mouse or mouse mat? Looks like a hardware problem. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Windows Vista Home Premium with SP2 and IE9 guard reinstall KB890830

  It is there no error code actually after every time it is said installed successfully.

  Computer HP CNX72415hd model

  Any ideas.

  Hi Glenn4001,

  Follow the troubleshooting steps in this document to resolve the problem with the update offered repeatedly.

  Let is know if this helps.

• Windows Easy Transfer 7 does not work on Vista

  Try to migrate date files and the configuration of Vista Home Premium (32 bit) to Windows 7 Home Premium (64 bit), Windows 7 laptop says to use a new version of Easy Transfer, tried to install that but it does not work. Starts then just seems to close, without indication of the error.

  Hi boris99,

  You can see the following thread, which presents a similar problem discussed.

  Windows 7 easy transfer does not work on Vista Home Premium 32

• I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet.

  I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet. I updated drivers and tried everything that other people have told me to try on other forums to the best of my abilities. I'm not otherwise qualified in computer science. Also, I will mention this all started when I restored my computer laptop back to factory settings. I did it because that's all I could think about. As far as coming back on my laptop, he did do the trick. Thus, suggestions, thoughts will be appreciated.

  Thank you

  Jim

  Lima, Ohio

  original title: unable to print attachments from Windows Mail

  Hello

  The print job goes to the queue?

  Method 1:
  I suggest you through the Windows 7 steps in this document.

  Method 2:
  Alternatively, you can try to plug in the printer and the laptop to see if it makes a difference.

• I have re loaded vista home prem but its saying that my activation code is in use

  original title: ACTIVATION
  I have re loaded vista home prem but its says my activation code is in use, what do I do?

  This is normal - you must activate by phone.

  If this fails, publish a report MGADiag...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA