Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

Original title: print printer print

I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

Tags: Windows

Similar Questions

  • My Scanner does not work! Error: Make sure that the feature is open

    I have a copier, printer, fax, scanner printer HP all-in-one.  Everything works but the scanner.  The message says "make sure the feature is open.  Open HP printing software. Shares of select the scanner. Then select manage the Scan to computer.  How can I open software HP printer?

    Hello

    1. What is the model while a printer?

    2. is it works much earlier?

    You can check the printer manual to see if there are parameters for the analysis.

    Try to update the printer drivers. You can visit the manufacturer's website to do the same.

    Reference:

    Resources for the resolution of the printer in Windows XP problems

    http://support.Microsoft.com/kb/308028

    Let us know if it helps!

  • «operation cannot complete error 0 x 00000709.» Double check the name of the printer and make and make sure that the printer is connected to the network. »

    Original title: Error 0 x 00000709...

    Error 0 x 00000709... I get this message because I bought a new laptop printer a canon IP100.   My computer won't let me not choose as a default printer at all and it comes up with this message:

    «operation cannot complete error 0 x 00000709.»  Double check the name of the printer and make and make sure that the printer is connected to the network. »

    I had trouble terrible., the only way I was able to use it is to remove the other printer but then again used I would have like a detauls.

    Can someone tell me how to fix this error, I would apreciate any help I could get with that.  I have two printers in the same time, one for the front desk and the other mobile.  I'm sure that someone out there knows what to do?  Thank you

    Hello

    Please follow the suggestions posted on April 16, 2013 by me from the link below.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/printing-error-0x00000709-when-i-try-to-make-my/a8235379-07ad-487e-b9e8-e041f3a715ee

    Please back up the registry before making changes.

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    Hope that the information provided is useful. Do not respond if you need more help.

  • get this error, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled

    Original title: Windows Server NIC 2016

    Im trying to set up the consolidation of network cards on Technical preview of windows server 2016 3, build 10537 and I get this error message, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled. »

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

  • Windows Installer error only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

    Trouble with trying to install an MSI Package. Receive the error message only by the installation of the machine is allow. It's when you try to run manually. When you try to run msiexec cmd

    msiexec /i "C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi" /qb/log "C:\install.log.

    = Recording started: 04/09/2013-10:36:27 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\windows\system32\msiexec.exe =.
    MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

    MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

    MSI (c) (58:88) [10:36:27:107]: Resetting cached policy values
    MSI (c) (58:88) [10:36:27:107]: value of strategy Machine 'Debug' is 0
    MSI (c) (58:88) [10:36:27:107]: * RunEngine:
    Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
    Action:
    Command line:
    MSI (c) (58:88) [10:36:27:107]: Client and UI is none or basic: full installation running on the server.
    MSI (c) (58:88) [10:36:27:107]: grabbed execution mutex.
    MSI (c) (58:88) [10:36:27:147]: Cloaking enabled.
    MSI (c) (58:88) [10:36:27:147]: attempt of activation of all disabled privileges before calling install on server
    MSI (c) (58:88) [10:36:27:147]: meter is incremented to disable the stop. Counter after increment: 0
    MSI (s) (C 54:4) [10:36:27:157]: running the installation inside the multi-package transaction Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi
    MSI (s) (C 54:4) [10:36:27:157]: grabbed execution mutex.
    MSI (s) (54:F8) [10:36:27:157]: Resetting cached policy values
    MSI (s) (54:F8) [10:36:27:157]: value of strategy Machine 'Debug' is 0
    MSI (s) (54:F8) [10:36:27:157]: * RunEngine:
    Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
    Action:
    Command line:
    MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'DisableUserInstalls' is 0
    MSI (s) (54:F8) [10:36:27:477]: value 'SearchOrder' user policy is 'nmu '.
    MSI (s) (54:F8) [10:36:27:477]: "DisableMedia" user policy value is 0
    MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'AllowLockdownMedia' is 0
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media enabled only if the package is safe.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: looking for sourcelist for product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: added {C28136F7-F2C7-4426-B26F-F7E03922B34B}; for the potential sourcelist (pcode; disc; relpath) list.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: check now product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media is enabled for the product.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: attempting to use LastUsedSource from source list.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: source C:\windows\ccmcache\4\ by train.
    MSI (s) (54:F8) [10:36:27:787]: entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (54:F8) [10:36:27:787]: source specified is already in a list.
    MSI (s) (54:F8) [10:36:27:787]: value 'SearchOrder' user policy is 'nmu '.
    MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'DisableBrowse' is 0
    MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'AllowLockdownBrowse' is 0
    MSI (s) (54:F8) [10:36:27:787]: adding new sources is allowed.
    MSI (s) (54:F8) [10:36:27:787]: the LastUsedSource value: C:\windows\ccmcache\4\.
    MSI (s) (54:F8) [10:36:27:787]: value LastUsedType: n.
    MSI (s) (54:F8) [10:36:27:787]: A LastUsedIndex: 1.
    MSI (s) (54:F8) [10:36:27:787]: SOURCEMGMT: resolved source: 'C:\windows\ccmcache\4\ '.
    MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'LimitSystemRestoreCheckpointing' is 0
    MSI (s) (54:F8) [10:36:27:787]: Note: 1: 1715 2: Services for 32-bit Outlook Mimecast
    MSI (s) (54:F8) [10:36:27:787]: SRSetRestorePoint API call. dwRestorePtType: 0, dwEventType: 102, llSequenceNumber: 0, szDescription: «Installed it Services for Outlook 32-bit»
    MSI (s) (54:F8) [10:36:27:787]: the system restore service is disabled. Referred State: 1058. GetLastError() returned: 1058
    MSI (s) (54:F8) [10:36:28:117]: file will have the applied safety of OpCode.
    MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> ' C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi ' against the software restriction policy
    MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi has a digital signature
    MSI (s) (54:F8) [10:36:28:547]: STRATEGY of RESTRICTION SOFTWARE: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi is allowed to run at the level of authorization 'unlimited '.
    MSI (s) (54:F8) [10:36:28:547]: dialogue of end not activated
    MSI (s) (54:F8) [10:36:28:547]: ==> C:\windows\ccmcache\4\Mimecast4.0.msi original packaging
    MSI (s) (54:F8) [10:36:28:547]: we're running out of ==> C:\windows\Installer\14b48052.msi package
    MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
    MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: no matching ProductCode found in the database.
    MSI (s) (54:F8) [10:36:28:557]: MSCOREE not loaded loading copy from system32
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisablePatch' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AllowLockdownPatch' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableLUAPatching' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableFlyWeightPatching' is 0
    MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
    MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: no matching ProductCode found in the database.
    MSI (s) (54:F8) [10:36:28:557]: transformations are not secure.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is 'C:\install.log.
    MSI (s) (54:F8) [10:36:28:557]: command line: MSIINSTALLPERUSER = 3 CURRENTDIRECTORY = C: \ CLIENTUILEVEL = 2 CLIENTPROCESSID = 3672
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding PackageCode property. Its value is '{6C9809C5-9DBC-4683-AE5F-3E05D53939EA} '.
    MSI (s) (54:F8) [10:36:28:557]: Product Code spent in Engine.Initialize: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
    MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties before transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
    MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties after transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
    MSI (s) (54:F8) [10:36:28:557]: unregistered product: first start installation
    MSI (s) (54:F8) [10:36:28:557]: has determined that the existing product (this product or the product being upgraded with a patch) is installed by user.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting ALLUSERS property. Its current value is '1 '.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
    MSI (s) (54:F8) [10:36:28:557]: MSI_LUA: invites of credentials not required, the user is an administrator
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding ProductState property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:557]: entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (54:F8) [10:36:28:557]: source specified is already in a list.
    MSI (s) (54:F8) [10:36:28:557]: value 'SearchOrder' user policy is 'nmu '.
    MSI (s) (54:F8) [10:36:28:557]: adding new sources is allowed.
    MSI (s) (54:F8) [10:36:28:557]: the Package name from the configuration data: "Mimecast4.0.msi."
    MSI (s) (54:F8) [10:36:28:557]: Note: 2 1: 2262: AdminProperties 3:-2147287038
    MSI (s) (54:F8) [10:36:28:557]: Machine policy value 'DisableMsi' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AlwaysInstallElevated' is 0
    MSI (s) (54:F8) [10:36:28:557]: "AlwaysInstallElevated" user policy value is 0
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
    MSI (s) (54:F8) [10:36:28:557]: the product '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' is running with elevated privileges: product is affected.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is "C:\". ».
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '2'.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is '3672'.
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiRestartManagerSessionKey property. Its value is 'b9237eca8dffb44583db9105bf61f283 '.
    MSI (s) (54:F8) [10:36:28:567]: MANAGER of REBOOT: logon.
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
    MSI (s) (54:F8) [10:36:28:567]: TRANSFORMS property is now:
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding PRODUCTLANGUAGE property. Its value is "1033".
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application data
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Favorites
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network shortcuts
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Documents
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer shortcuts
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\AppData\Local
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\Pictures
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Menu\Programs\Administrative of Directors Data\Microsoft\Windows\Start
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application start\program Data\Microsoft\Windows\Start
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Desktop
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\windows\Fonts
    MSI (s) (54:F8) [10:36:28:587]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
    MSI (s) (54:F8) [10:36:28:597]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding USERNAME property. Its value is "Oriel securities user".
    MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is "Oriel Securities Ltd.".
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\windows\Installer\14b48052.msi '.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is 'C:\windows\ccmcache\4\Mimecast4.0.msi '.
    MSI (s) (54:F8) [10:36:28:597]: value of strategy Machine 'MsiDisableEmbeddedUI' is 0
    MSI (s) (54:F8) [10:36:28:597]: Note: 1: 2205 2:3: Package_correctif
    MSI (s) (54:F8) [10:36:28:597]: policy value 'DisableRollback' Machine is 0
    MSI (s) (54:F8) [10:36:28:597]: strategy user 'DisableRollback' is 0
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding UILevel property. Its value is '3'.
    = Logging started: 04/09/2013-10:36:28 =.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding ACTION property. Its value is 'INSTALL '.
    MSI (s) (54:F8) [10:36:28:597]: doing action: INSTALL
    Action start 10:36:28: INSTALL.
    MSI (s) (54:F8) [10:36:28:597]: ExecuteSequence running
    MSI (s) (54:F8) [10:36:28:597]: action driving: FindRelatedProducts
    Action start 10:36:28: FindRelatedProducts.
    MSI (s) (54:F8) [10:36:28:597]: action driving: AppSearch
    Action ended at 10:36:28: FindRelatedProducts. Returns the value 1.
    Action start 10:36:28: AppSearch.
    MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding NETFRAMEWORK40FULL property. Its value is '#1 '.
    MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
    MSI (s) (54:F8) [10:36:28:597]: action driving: OutlookVersionCheck
    Action ended at 10:36:28: AppSearch. Returns the value 1.
    MSI (s) (54:C8) [10:36:28:627]: call for a custom action to distance. DLL: C:\windows\Installer\MSI837D.tmp, point of entry: OutlookVersionCheck
    MSI (s) (54:B8) [10:36:28:627]: generation random cookie.
    MSI (s) (54:B8) [10:36:28:637]: created server custom with PID 4656 (0 x 1230) Action.
    MSI (s) (54:80) [10:36:28:667]: running as a service.
    MSI (s) (54:80) [10:36:28:667]: Hello, I am your 32-bit custom action Server Impersonated.
    Action start 10:36:28: OutlookVersionCheck.
    SFXCA: Extraction of a custom action to the temporary directory: C:\windows\Installer\MSI837D.tmp-\
    SFXCA: Link to the CLR version v4.0.30319
    Call to the custom action CustomAction_OutlookCheck! CustomAction_OutlookCheck.CustomActions.OutlookVersionCheck
    BEGIN OutlookVersionCheck
    OUTLOOK BITNESS IS: x 86
    Key checking: Software\Microsoft\Office\11.0\Outlook
    Key checking: Software\Wow6432Node\Microsoft\Office\11.0\Outlook
    Key checking: Software\Microsoft\Office\12.0\Outlook\InstallRoot
    Key checking: Software\Wow6432Node\Microsoft\Office\12.0\Outlook\InstallRoot
    MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: adding OUTLOOK_INSTALLED property. Its value is 'TRUE '.
    Key checking: Software\Microsoft\Office\14.0\Outlook\InstallRoot
    Found version: Outlook 2010
    Key checking: Software\Wow6432Node\Microsoft\Office\14.0\Outlook\InstallRoot
    MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: property to change OUTLOOK_VERSION. Its current value is 'NONE '. Its new value: "Outlook 2010".
    Found version: Outlook 2010
    OUTLOOK_INSTALLED is: TRUE
    IS THE VERSION of OUTLOOK: Outlook 2010
    MSI (s) (54:F8) [10:36:28:830]: action driving: LaunchConditions
    Action ended at 10:36:28: OutlookVersionCheck. Returns the value 1.
    Action start 10:36:28: LaunchConditions.
    MSI (s) (54:F8) [10:38:26:502]: product: service Mimecast for 32-bit Outlook - only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

    MSI (c) (58:C0) [10:36:28:850]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

    Installation is allowed only by the machine. Please make sure that the user has the appropriate rights to do so.
    Action ended at 10:38:26: LaunchConditions. Return value 3.
    Action ended at 10:38:26: INSTALL. Return value 3.
    Property (S): UpgradeCode = {586A589B-D6D5-48D3-9B6D-571EF230ED6A}
    Property (S): NETFRAMEWORK40FULL = 1 #.
    Property (S): LAUNCHOUTLOOKONEXIT = 1
    Property (S): WIXUI_INSTALLDIR = INSTALLDIR
    Property (S): OutlookOpen = false
    Property (S): ProgramFilesFolder = C:\Program Files (x 86).
    Property (S): VersionNT = 601
    Property (S): Manufacturer = Mimecast Ltd
    Property (S): ProductCode = {C28136F7-F2C7-4426-B26F-F7E03922B34B}
    Property (S): ProductLanguage = 1033
    Property (S): ProductName = Mimecast Services for 32-bit Outlook
    Property (S): ProductVersion = 4.0.348.5166
    Property (S): ARPPRODUCTICON = MainIcon.exe
    Property (S): ARPHELPLINK = * address email is removed from the privacy *
    Property (S): ARPNOMODIFY = 0
    Property (S): Platform = *.
    Property (S): ROOTDRIVE = C:\\
    Property (S): MsiBitness = x 86
    Property (S): MimecastInstaller = *.
    Property (S): CAP_Common = *.
    Property (S): CAP_Common.Options = *.
    Property (S): CAP_Common.Options.Credentials = *.
    Property (S): CAP_Common.Options.ChangePassword = *.
    Property (S): CAP_Common.Options.Network = *.
    Property (S): CAP_Common.Options.Network.Read = *.
    Property (S): CAP_Common.Options.Network.Update = *.
    Property (S): CAP_Common.Options.Capabilities = *.
    Property (S): CAP_Common.Update.Manual = *.
    Property (S): CAP_Archive = *.
    Property (S): CAP_Archive.Search = *.
    Property (S): CAP_Archive.Search.Quick = *.
    Property (S): CAP_Archive.Search.Basic = *.
    Property (S): CAP_Archive.Search.Builder = *.
    Property (S): CAP_Archive.Search.Context = *.
    Property (S): CAP_Archive.Search.Recent = *.
    Property (S): CAP_Archive.Search.Favourite = *.
    Property (S): CAP_Archive.Search.Manage = *.
    Property (S): CAP_Gateway = *.
    Property (S): CAP_Gateway.Block = *.
    Property (S): CAP_Gateway.Block.Address = *.
    Property (S): CAP_Gateway.Block.Domain = *.
    Property (S): CAP_Gateway.Block.ReportSpam = *.
    Property (S): CAP_Gateway.Block.ManagedSenders = *.
    Property (S): CAP_Gateway.OnHoldItems = *.
    Property (S): CAP_Gateway.OnHoldItems.Personal = *.
    Property (S): CAP_Gateway.OnHoldItems.Moderated = *.
    Property (S): CAP_Gateway.OnHoldItems.Release = *.
    Property (S): CAP_Gateway.OnHoldItems.Block = *.
    Property (S): CAP_Gateway.Track = *.
    Property (S): CAP_Gateway.Transport = *.
    Property (S): CAP_Gateway.Transport.Secure = *.
    Property (S): CAP_Gateway.Transport.CCM = *.
    Property (S): CAP_Gateway.Transport.Stationery = *.
    Property (S): CAP_Gateway.Transport.Stationery.None = *.
    Property (S): CAP_Gateway.Transport.Stationery.Select = *.
    Property (S): CAP_Gateway.Transport.Attachments = *.
    Property (S): CAP_Gateway.Transport.Attachments.Convert = *.
    Property (S): CAP_Gateway.Transport.Attachments.Metadata = *.
    Property (S): CAP_Gateway.Transport.Attachments.StripLink = *.
    Property (S): CAP_Continuity = *.
    Property (S): CAP_Continuity.Mailbox = *.
    Property (S): CAP_Continuity.Mailbox.ReceivedItems = *.
    Property (S): CAP_Continuity.Mailbox.SentItems = *.
    Property (S): CAP_Continuity.Monitor = *.
    Property (S): CAP_Continuity.Monitor.Auto = *.
    Property (S): CAP_Continuity.Monitor.User = *.
    Property (S): CAP_Continuity.Monitor.Admin = *.
    Property (S): CAP_Continuity.Enable = *.
    Property (S): CAP_Continuity.Enable.Auto = *.
    Property (S): CAP_Continuity.Enable.Admin = *.
    Property (S): CAP_Piits = *.
    Property (S): CAP_Piits.Management = *.
    Property (S): CAP_Piits.AutoMount = *.
    Property (S): Global.Service.AccountType = *.
    Property (S): Global.Service.Username = *.
    Property (S): Global.Service.Password = *.
    Property (S): Global.WebProxy.Enable = *.
    Property (S): Global.WebProxy.Type = *.
    Property (S): Global.WebProxy.URL = *.
    Property (S): Global.WebProxy.Username = *.
    Property (S): Global.WebProxy.Password = *.
    Property (S): Global.Settings.IgnoreLocal = *.
    Property (S): Global.AutoUpdate.URL = *.
    Property (S): Global.AutoUpdate.Enable = *.
    Property (S): Global.Logging.LogDirectory = *.
    Property (S): Global.Logging.MaxFileSize = *.
    Property (S): Global.Service.MaxRolls = *.
    Property (S): Global.Logging.Level = *.
    Property (S): Session.Pits.FolderSyncInterval = *.
    Property (S): Global.Piits.MaxMessagesPerFolder = *.
    Property (S): Global.Service.InstallDirectory = *.
    Property (S): Global.Service.DataCacheSize = *.
    Property (S): Session.Continuity.PreDupeDuration = *.
    Property (S): Session.Continuity.PostDupeDuration = *.
    Property (S): Session.Continuity.HardFrequency = *.
    Property (S): Session.Continuity.SoftDuration = *.
    Property (S): Session.Continuity.EndContinuityExchangeAvailable = *.
    Property (S): Session.Continuity.EndContinuityMimecastUnavailable = *.
    Property (S): Global.Feedback.Recipients = *.
    Property (S): DefaultUIFont = *.
    Property (S): MSIRESTARTMANAGERCONTROL = DisableShutdown
    Property (S): REBOOT = ReallySuppress
    Property (S): OUTLOOK_VERSION = Outlook 2010
    Property (S): OUTLOOK_BITNESS = x 86
    Property (S): ErrorDialog = ErrorDlg
    Property (S): SERVICE_DIR = Windows Service Mimecast
    Property (S): SecureCustomProperties = NETFRAMEWORK40FULL; NEWERPRODUCTFOUND; OLDAPPFOUND; PREVIOUSVERSIONSINSTALLED; WIX_DOWNGRADE_DETECTED; WIX_UPGRADE_DETECTED
    Property (S): MsiHiddenProperties = _LicenseAgreed; CAP_Archive; CAP_Archive.search; CAP_Archive.search.Basic; CAP_Archive.search.Builder; CAP_Archive.search.context; CAP_Archive.search.favourite; CAP_Archive.search.manage; CAP_Archive.search.quick; CAP_Archive.search.recent; CAP_Common; CAP_Common.options; CAP_Common.options.capabilities; CAP_Common.options.ChangePassword; CAP_Common.options.credentials; CAP_Common.options.network; CAP_Common.options.network.read; CAP_Common.options.network.Update; CAP_Common.update.manual; CAP_Continuity; CAP_Continuity.enable; CAP_Continuity.enable.admin; CAP_Continuity.enable.Auto; CAP_Continuity.mailbox; CAP_Continuity.mailbox.ReceivedItems; CAP_Continuity.mailbox.SentItems; CAP_Continuity.monitor; CAP_Continuity.monitor.admin; CAP_Continuity.monitor.Auto; CAP_Continuity.monitor.user; CAP_Gateway; CAP_Gateway.block; CAP_Gateway.block.address; CAP_Gateway.block.domain; CAP_Gateway.block.ManagedSenders; CAP_Gateway.block.ReportSpam; CAP_Gateway.OnHoldItems; CAP_Gateway.OnHoldItems.block; CAP_Gateway.OnHoldItems.moderated; CAP_Gateway.OnHoldItems.personal; CAP_Gateway.OnHoldItems.release; CAP_Gateway.track; CAP_Gateway.transport; CAP_Gateway.transport.attachments; CAP_Gateway.transport.attachments.convert; CAP_Gateway.transport.attachments.metadata; CAP_Gateway.transport.attachments.StripLink; CAP_Gateway.transport.CCM; CAP_Gateway.transport.secure; CAP_Gateway.transport.stationery; CAP_Gateway.transport.stationery.None; CAP_Gateway.transport.stationery.Select; CAP_Piits; CAP_Piits.automount; CAP_Piits.Management; DefaultUIFont; Global.AutoUpdate.Enable; Global.AutoUpdate.URL; Global.Feedback.Recipients; Global.Logging.Level; Global.Logging.LogDirectory; Global.Logging.MaxFileSize; Global.Piits.MaxMessagesPerFolder; Global.Service.AccountType; Global.Service.DataCacheSize; Global.Service.InstallDirectory; Global.Service.MaxRolls; Global.Service.Password; Global.Service.Username; Global.Settings.IgnoreLocal; Global.WebProxy.Enable; Global.WebProxy.Password; Global.WebProxy.Type; Global.WebProxy.URL; Global.WebProxy.Username; MimecastInstaller; PLATFORM; Session.Continuity.EndContinuityExchangeAvailable; Session.Continuity.EndContinuityMimecastUnavailable; Session.Continuity.HardFrequency; Session.Continuity.PostDupeDuration; Session.Continuity.PreDupeDuration; Session.Continuity.SoftDuration; Session.Pits.FolderSyncInterval
    Property (S): MsiLogFileLocation = C:\install.log
    Property (S): PackageCode = {6C9809C5-9DBC-4683-AE5F-3E05D53939EA}
    Property (S): ProductState = 1
    Property (S): PRODUCTLANGUAGE = 1033
    Property (S): CURRENTDIRECTORY = C:\
    Property (S): CLIENTUILEVEL = 2
    Property (S): CLIENTPROCESSID = 3672
    Property (S): MsiRestartManagerSessionKey = b9237eca8dffb44583db9105bf61f283
    Property (S): VersionDatabase = 200
    Property (S): MsiSystemRebootPending = 1
    Property (S): VersionMsi = 5.00
    Property (S): VersionNT64 = 601
    Property (S): WindowsBuild = 7601
    Property (S): ServicePackLevel = 1
    Property (S): ServicePackLevelMinor = 0
    Property (S): MsiNTProductType = 1
    Property (S): WindowsFolder = C:\windows\
    Property (S): WindowsVolume = C:\
    Property (S): System64Folder = C:\windows\system32\
    Property (S): SystemFolder = C:\windows\SysWOW64\
    Property (S): RemoteAdminTS = 1
    Property (S): TempFolder = C:\Users\TECH~1.SUP\AppData\Local\Temp\
    Property (S): CommonFilesFolder directory = C:\Program Files (x 86) \Common Files\
    Property (S): ProgramFiles64Folder = C:\Program Files\
    Property (S): CommonFiles64Folder = C:\Program Files\ Files\Fichiers
    Property (S): AppDataFolder = \\gblon-v-fp001\users$\tech.support\Application Data\
    Property (S): FavoritesFolder = \\gblon-v-fp001\users$\tech.support\Favorites\
    Property (S): NetHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network Shortcuts\
    Property (S): PersonalFolder = \\gblon-v-fp001\users$\tech.support\Documents\
    Property (S): PrintHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer Shortcuts\
    Property (S): RecentFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent\
    Property (S): SendToFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo\
    Property (S): TemplateFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates\
    Property (S): CommonAppDataFolder = C:\ProgramData\
    Property (S): LocalAppDataFolder = C:\Users\tech.support\AppData\Local\
    Property (S): MyPicturesFolder = C:\Users\tech.support\Pictures\
    Property (S): AdminToolsFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start administration Tools\
    Property (S): StartupFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start demarrer\programmes\demarrage\
    Property (S): ProgramMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\
    Property (S): StartMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\
    Property (S): DesktopFolder = \\gblon-v-fp001\users$\tech.support\Desktop\
    Property (S): Font = C:\windows\Fonts\
    Property (S): GPTSupport = 1
    Property (S): OLEAdvtSupport = 1
    Property (S): ShellAdvtSupport = 1
    Property (S): MsiAMD64 = 6
    Property (S): Msix64 = 6
    Property (S): Intel = 6
    Property (S): PhysicalMemory = 4027
    Property (S): VirtualMemory = 5339
    Property (S): AdminUser = 1
    Property (S): MsiTrueAdminUser = 1
    Property (S): LogonUser = tech.support
    Property (S): UserSID = S-1-5-21-583907252-2049760794-725345543-5685
    Property (S): UserLanguageID = 2057
    Property (S): ComputerName = OSLLONPC052
    Property (S): SystemLanguageID = 2057
    Property (S): ScreenX = 1024
    Property (S): ScreenY = 768
    Property (S): CaptionHeight = 22
    Property (S): BorderTop = 1
    Property (S): BorderSide = 1
    Property (S): TextHeight = 16
    Property (S): TextInternalLeading = 3
    Property (S): ColorBits = 32
    Property (S): TTCSupport = 1
    Property (S): Time = 10:38:26
    Property (S): Date = 04/09/2013
    Property (S): MsiNetAssemblySupport = 4.0.30319.1
    Property (S): MsiWin32AssemblySupport = 6.1.7601.17514
    Property (S): RedirectedDllSupport = 2
    Property (S): MsiRunningElevated = 1
    Property (S): The privilege = 1
    Property (S): Name of USER = Oriel securities user
    Property (S): COMPANYNAME = Oriel Securities Ltd.
    Property (S): basis of DATA = C:\windows\Installer\14b48052.msi
    Property (S): OriginalDatabase = C:\windows\ccmcache\4\Mimecast4.0.msi
    Property (S): UILevel = 3
    Property (S): ACTION = INSTALL
    Property (S): OUTLOOK_INSTALLED = TRUE
    MSI (s) (54:F8) [10:38:26:532]: see clean files/packages, if there
    MSI (s) (54:F8) [10:38:26:532]: MainEngineThread returned 1603
    MSI (s) (C 54:4) [10:38:26:542]: RESTART MANAGER: closed Session.
    MSI (s) (C 54:4) [10:38:26:542]: sequence number number for this installation system restore.
    = Logging stopped: 04/09/2013-10:38:26 =.
    MSI (s) (C 54:4) [10:38:26:542]: strategy user 'DisableRollback' is 0
    MSI (s) (C 54:4) [10:38:26:542]: policy value 'DisableRollback' Machine is 0
    MSI (s) (C 54:4) [10:38:26:542]: meter is incremented to disable the stop. Counter after increment: 0
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
    MSI (s) (C 54:4) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
    MSI (s) (C 54:4) [10:38:26:542]: restoration of the environment variables
    MSI (s) (C 54:4) [10:38:26:542]: object to destroy RemoteAPI.
    MSI (s) (54:B8) [10:38:26:542]: end of thread Custom Action Manager.
    MSI (c) (58:88) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
    MSI (c) (58:88) [10:38:26:542]: MainEngineThread returned 1603
    = Recording stopped: 04/09/2013-10:38:26 =.

    Appreciate that any direction. Seems that maybe the MSI package might have broken this machine

    Hi Dan,

    This computer is on a domain network?

    I suggest that post you the question in Mimecast forums for more information support:

    Support community-powered Mimecast

    https://community.Mimecast.com/Mimecast

    Hope this information helps.

  • Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

    Hi guys,.

    I have problems getting my sbRIO 9606 to deploy.

    Everything's fine until during the deployment process, I get this:

    Deployment of sbRIO 9606 chassis (sbRIO-9606)
    LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

    I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

    Please find attached the screenshots of my:

    • License Manager OR
    • Overview of the 9606 MAX
    • My project folder
    • Dialog box deployment where the error is displayed.

    -Adam

    Hi Tim,.

    In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

    The problem is that the recommended Software NI Scan Engine 3.0 installation program.

    The sbRIO 9606 does not support scanning engine.

    Once the scanning engine support has been uninstalled, I could deploy on my 9606.

  • In the Powershell script execution error: could not find the type [ordered]: make sure that the assembly containing this type is loaded.

    People,

    I am trying to load and run the PowerShell script of PowerCLI Module to check the CPU, memory and storage overcommitment. VMware PowerCLI Blog - VMware Blogs but somehow it is always stopped with the error: cannot find the [ordered] type: make sure that the assembly containing this type is loaded.

    Here are some of the diagnostic result:

    $PSVersionTable

    Value name

    ----                           -----

    PSVersion 2.0

    PSCompatibleVersions {1.0, 2.0}

    BuildVersion 6.1.7601.17514

    PSRemotingProtocolVersion 2.1

    WSManStackVersion 2.0

    CLRVersion 4.0.30319.1026

    SerializationVersion 1.1.0.1

    Get-ChildItem ' HKLM:\SOFTWARE\Microsoft\NET frame Setup\NDP'-recurse |

    Get-ItemProperty-name of the EA - 0 Version |

    Where {$_.} PSChildName-match ' ^ (?) (S) \p {L} "} |"

    Select PSChildName, Version

    PSChildName Version

    -----------                       -------

    v2.0.50727 2.0.50727.5420

    3.0.30729.5420 v3.0

    Windows Communication Foundation 3.0.4506.5420

    Windows Presentation Foundation 3.0.6920.5011

    3.5.30729.5420 v3.5

    Customer 4.0.30319

    4.0.30319 full

    Get-PowerCLIVersion

    PowerCLI Version

    ----------------

    VMware vSphere PowerCLI 5.8 Release 1 build 2057893

    ---------------

    Versions of the snap

    ---------------

    Build VMWare AutoDeploy PowerCLI component 5.5 1983942

    Build VMWare ImageBuilder PowerCLI component 5.5 1983942

    Build license of VMware PowerCLI component 5.5 1265954

    Build VMware Storage PowerCLI component 5.8 2057894

    Build VDS's VMware PowerCLI component 5.8 2031581

    Build VMware vSphere PowerCLI component 5.8 2031581

    I installed Windows6. 1 -KB2819745- x 64 - MultiPkg.msu to enable Powershell v4.0 on my Windows 7 laptop, but still the script cannot be executed with the above error message.

    Any kind of aid and assistance would be greatly appreciated.

    Thank you

    Hello-

    Ah, yes--it is that review.

    Another option, because you are not able to go to .NET FX 4.5, is to remove the parts "[ordered]' of the code that you use.  This type Accelerator makes the hash table a dictionary sorted.  The effect to remove that from the code will be that the properties of the object that results will not be in the order in which they appear in the code.

    And, another option would be to install PowerShell v3 (the version in which the '[ordered]' feature has been added').  That shouldn't require a FX .NET newer than what you showed as having already installed on this computer.  However, as we have seen with the PSSnapin and PSv4 Exchange, you want to make sure that the PSSnapins / Modules you want to use are compatible with PowerShell v3.

  • Error message: "could not cop files. Make sure that the target disk is not dead", during the installation of the drivers scanner Epson Perfection V500.

    Original title: the scanner driver update problems.

    Problem: I am trying to install a driver for an Epson scanner update.  I get the error message: could not copy files.  Make sure that the target disk is not read-only.

    I'm running Windows XP Home edition.  Scanner is an Epson Perfection V500 Photo.

    What I did:

    • A release with the support of Epson.  They tell me that I have the admin rights.  However, I am the administrator and log on as administrator
    • I downloaded the epson driver update, which is an executable zip file.  I right-click on the file, select Run As..., opt to run it as an admin user, enter my password and select run.  The files are decompressed, but at some point in the installation, I get the message "couldn't cop files.  Make sure that the target disk is not read-only.  (Target is C:\)
    • Furthermore, I installed this driver successfully on my other computer that is running Windows XP Professional

    Why not copy the driver files?

    Hi Passport35,

    You can try the following steps and check if it helps.

    Method 1:

    You can try running the fixit article and following cjheck, if it helps.

    Diagnose and solve the program installation and uninstallation problems automatically

    Method 2:

    If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

    a. click Start, click Run, type cmd in the Open box and then click OK.

    b. at the command prompt, type sfc/scannow, and then press ENTER.

    Note: the scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

    Wait for the analysis of complete and then check if you can install the drivers.

  • Windows 8 mail, Gmail error unable to connect. Make sure that the information you entered is correct

    I tried to set up a Gmail on windows mail 8 for some time. It worked before but then I had to re - install the app and I can't seem to log in now. The only difference between now and when it worked is that I had turned on google + once I had it working the first time, but now I have that turned off.

    I always get this error: unable to connect. Make sure that the information you entered is correct.
    If I have the chance and he fails to add account, then synchronization takes a long time and emails take 5-10 minutes to arrive on the application it does to get to my account in a web browser and on my phone.
    Many users complain about this, we really need a strong response here.

    Hi Martyr844_Coffe,

    Make sure that your google account manager has granted approval of this log - in...

    From there... https://myaccount.google.com/.

    And change the account setting Gmail on Mail app account like the following picture setting...

    (To find out the specific parameters of the account )

  • Cannot configure gmail with messaging metro app error unable to connect. Make sure that the information you entered is correct

    I was able to add an account Gmail for Windows 8 Mail App on my first install and everything worked well. Then bought an SSD and completely installed a new OS of Windows 8 it. Connected with the Live account that I used with the first installation of windows 8. All synchronized. The Mail app has Live accounts and Gmail put in place without having to re-enter the information myself. However, I noticed that Gmail sync never even when I choose sync. Removed from the account to add it again, but have failed so far. Keep gives me the error "unable to connect. Make sure that the information you entered is correct. "Tried to install it on my phone Windows 8 (Nokia 920) and he keeps asking me to re-enter the password. I'm 100% sure that I have no 2-step check set up I checked several times. Never allowed them in the first place.

    At this point, I don't know if it's Google problem or the problem of the Mail application. Any suggestion?

    I also had the same problem. I had no problem for the other three Windows 8 install / computers that I used and the last she has imported all the fine adjustments. However, I had a portable Windows 8 different today and worked alone of my three accounts to Gmail. How I fixed it:

    Of the Mail app: charms > settings > accounts > add account > other account (NOT GMAIL!)
    Click IMAP for account type, then enter your credentials as usual. It connected and synchronized immediately for me.
    Hope this helps!

  • popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

    Once again; same problem, others have encountered but nothing seems to work.

    An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

    We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

    1 physical servers

    -Internal IP address; 172.16.160.21
    -FARM Firewall

    vCenter Server

    -Internal IP address; 172.16.1.85

    -Local Office (ALX)

    Location of destination (ESXi host):

    -Internal IP address; 172.16.153.20

    -Firewall ROOMMATE


    Already completed:

    VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

    Firewall are open / Tunnel is open throughout the environment.

    I have attached the logs.

    Thank you very much

    POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

  • I'm unable to open one of my 'recent documents' document. It is said to make sure that the network resource is available.

    Original title: "Recent Documents".

    I'm unable to open one of my 'recent documents' document.  It is said to make sure that the network resource is available.  What does that mean?  And I can't find the document in "My Documents" is.  And I tried a search.

    Hello

    The error means either that the document no longer is located in the folder it was when it was finally opened or the location that the file was initially located in is no longer in the same place.

    Example 1: I open a document in the My Documents folder, then after closing the document, I moved manually the file to the desktop.

    Example2: I open a document located on a removable hard drive. After the closure of the paper, I then disconnect the removable hard drive of the PC.

    In these two examples, Windows would be able to find the Document using the "Recent Documents" list

    Step 1: I recommend that you check the trash or see if the document is located on a removable hard drive (or USB key) that is is more attached to the computer.

    Step 2: Use recovery software of the third party to recover the document.
     
    THIRD WARNING:
    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • When I bring up Firefox it asks me to make sure that the Proxy settings are correct. What are the proxy settings?

    When I double click the icon of Mozilla Firefox to open up an error message appears and says "the Proxy server refuses connections" check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running.

    Please help me with this.
    Thank you

    Try the following and any parameter works, keep it Permanent:

    (1) go to the Menu Tools-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option 1-> click OK-> OK

    (2) go to the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option2-> click OK-> OK

    (3) go in the Tools Menu-> Options-> advanced-> network-> click on the "Settings" button... "in front of connection-> select option3-> click OK-> OK

    Check that the solution works.

  • Adding a device:-201401. Make sure that the device is connected?

    I was able to set up my Explorer Measurement & Automation to detect my device (NI cDAQ-9188), but I'm unable to add the device.  The error statement says:

    Add the device failed.  From the device driver error report is as follows:

    Add a device

    -201401

    Recovery of the properties of the network device failed.  Make sure that the device is connected.

    How can I fix this so that I can test my modules e/s?

    DAQmx version: 9.7.5

    Operating system: Windows 7 64-bit

    Initially:

    In the tab network adapters, it reads:

    -No network adapters found

    In the tab of the firmware, it reads:

    -firmware version: 1.1.0f0

    Based on the status of the network configuration tab, I assumed that my problem was related to the network connection.  I have reset my network cards and this seemed to solve my problem.  Thanks for your help.

  • I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

    I can't get the automatic updates on my samsung jack sgh-i616.

     

    "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

     

    RESULT CODE: 80072ee7

     

    -It is a windows mobile 6.1

    Thank you very much! = D

    As a guide.

    This error code translates ERROR_INTERNET_CANNOT_CONNECT.

    You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

Maybe you are looking for