Printer HP LaserJet 1020 Unrecoginzed on Windows 8

Similar Questions

• Difficulties to download the driver for printer HP laserjet 1020 for laptop Windows 7 (64-bit)

  I bought a new laptop from HP which works under Windows 7 (64-bit). I tried to download the driver for my HP laserjet 1022 printer - the website shows that this printer should work with Windows 7 with the driver available for download from the HP site. When I click to download the driver it starts to download, but then I get the following message "downloading lj1020-HP-pnp-win64 - in .exe was interrupted. I'm trying to resume the download and the same thing happens each and every time.

  Someone at - it solutions? Thank you

  Sarah - I dsl which is at the lower end of DSL speed and I can tell you that I sometimes have problems download from the HP site.  The HP software is quite 'bulky' and/or 'intense' (I have no other way to describe it).  If it gets interrupted it usually leaves.  My guess is that it's your connection mobile broadband is not not a connection permanently at times causing the interruption.  If you have no regular internet type, try to go to a mobile hotspot that is free in a city near you or a store that offers for free (Panera, McDonalds, Starbucks, etc.) and download the file from there.  Make sure your firewall is active and security to prevent unauthorized entry into your computer during download.

• Cannot install the printer Hp laserjet 1020

  Original title: cannot install my printer

  I bougth a new computer with windows 7, I try to install my priter hp laserjet 1020 I have the instalation disk but the computer can not find the driver, so I download the driver from the web page hp, but also the computer cannot read o found when the web site hp say's it

  Hi Michael,
   
  In addition to the suggestion of Palcouk, follow these steps and check if they help.
   
  Step 1:
   
  After you download the drivers from the manufacturer's website, right-click on the Setup file and run as administrator.
   
  Step 2:
   
  Temporarily turn off UAC (User Account Control) and try to install the driver.
   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Drivers download for HP LaserJet 1020 printer
   
  Printer HP LaserJet 1020 (32-bit driver)
  Printer HP LaserJet 1020 (64-bit driver)
   
  Also, be sure to have a look at the installation procedure.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I have trouble to install the printer HP laserjet P2055 on my Windows 7 HP pavilion

  I have trouble to install the printer HP laserjet P2055 on my windows 7 HP pavilion

  original title: installation problem

  Local printers

  To install a printer, the most common method is to connect directly to your computer. This is known as a local printer.

  If your printer is a universal serial (USB) bus model, Windows should automatically detect and install it when you plug it in.

  If it is an older model that connects using the serial or parallel, you may need to install manually.

  To install the printer (add) a local

  1. Click to open devices and printers.

  2. Click Add a printer.

  3. In the Add Printer Wizard, click Add a local printer.

  4. Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.

  5. On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.

     • If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional.

     • If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.)

  6. Perform the steps in the wizard and then click Finish.

     Tips

     • You can print a test page to make sure that the printer is working correctly. See print a test page.

     • If you have installed the printer, but it does not work, check the Web site of the manufacturer for troubleshooting driver or updated information.

  My printer does not print.

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  First of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions.

  Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  Then, try to update the printer driver on your computer. Sometimes printer problems come from out-of-date driver software, and can be solved by installing or reinstalling, the latest driver.

  To find the latest driver for your printer, first check Windows Update, which is designed to detect the hardware connected to your computer and automatically notify you when new drivers are available:

  1. Click to open Windows Update.

  2. In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you do not see a listed updated printer driver, it is always possible that there are: your printer manufacturer might not have provided to Microsoft yet.

  Most printer manufacturers offer updated drivers on the sections of the support of their Web sites. Drivers are typically organized by edition and Windows printing model. When you have found the right driver, install it according to the instructions of the manufacturer. For more information, see update a hardware driver that is not working properly.

  If your printer still does not work, see the support section of the website of the manufacturer of your printer for model-specific troubleshooting tips.

• I need a driver for printer hp laserjet 5 tr for windows 8

  I need a driver for printer hp laserjet 5 tr for windows 8, please help.  I use this printer all the time, it's a real work horse.   A former pilot windows 7 will work?  My husband can print over the network to the HP5 if with its windows 7.  Thanks in advance, Elaine

  This printer doesn't have a full Windows 8 support but if you take a look at this web page, you may be able to fix something: -.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c03365145

  It will be useful.

• printer Laserjet 1020 upgraded to windows 8.1 will not print PC HP Envy H8-1503

  Hello

  was wondering if anyone has problems printing of victory 8.1, used doctor HP printing and scanning and said everything's fine but a test page does not print as I can't print anything from another category windows 8.1. using windows 8 that I had no problem printing, I've updated all the drivers

  Also when I connect my laptop using windows 7 it prints, and with them turn off the printer laserjet 1020, then plug in the USB cable and windows 8.1 it will be printed.

  But when I turn off the 1020 laser jet, then turn it back on then try to print windows 8.1 that it will NOT print

  Thanks Mike

  Hello

  I understand that you can not print with Win 8.1.

  Drivers for win 8 and 8.1 Win are the two Version 9.
  Make sure that you uninstall the previous printer software.

  Here is a url to completely uninstall a printer in Win8.
  http://www.YouTube.com/watch?v=-M0GVVcwT-o

  Restart the computer.

  Reinstall the software of the printer again. Select full features software driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=439320#N173

  If you need more simply make assistance let me know.

• Print for Laserjet 1020 hosted by XP 32 bits over the network to Windows 7 64 bit

  I have a Laserjet 1020 USB, connected to a system running XP SP3. I need to print to it from a laptop running Windows 7 64-bit via my home network. Only driver Win 7 64 bit that I could find was for USB direct connect.

  Is there another combination of software that allow the ability to print network that I need?

  Follow these steps: on the machine Windows 7, download and run the Laserjet 1020 driver from here HP site.  When the installer comes to point of asking to connect through the USB port, and then click Cancel.

  Now go to the folder, devices and printers, add printer, a local printer, create a port, port Local, next, \\xpcomputer\printername (with the names of appropriate to share the printer and the computer XP sharing), then choose the Laserjet 1020.

• LaserJet 1020 driver for Windows 7 x 64 does not!

  Hello. I have the problem. I recently installed Windows 7 x 64, and when I tried to install the driver for my LaserJet 1020 of the site, an error appeared.

  First of all, when I launched the driver installation program, I have subscribed to the license agreement and proceeded. Than, in the loading bar appears, it came with 3 branches of division inside and above text was as "preinstall the driver files. Then suddenly, for a fraction of second text 'Copy of the files on the hard drive' appeared again once «Preinstallation of the driver...» "and he appeared again for less than a second and again and again... "That, after a few times, it's just crushed, with the Windows message"Printer Software Installer"does not work".

  And one more: in Program Files-> HP folder there is a lot of driver files (which seem to not work) and another file with the same file and folder inside HP HP... Recurrence, I think.

  So, what should I do? I can't use my printer for a long time because of this driver!

  I am have not spoken English for a while, so if I explained something strange, ask, I'll try to explain better =)

  Which is awesome? I'm awesome! ^_^

  I used the Russian version of the pilot, worked flawlessly =)

  Take it from here. Happy, if I could help it =)

  http://ftp.HP.com/pub/softlib/software11/COL22237/bi-58689-4/lj1020_1022-HB-PNP-Win64-ru.exe

• HP Laserjet 1020: HP Laserjet 1020 driver for Windows 10

  For the HP Laserjet 1020, HP publishes a printer driver for Windows 10?  It prints on the old driver, but strangely, all crush in two dimensions.

  Yes, it has been "published". ""  This comprehensive software solution is the same solution the box CD supplied with your printer. This isn't a software upgrade. If a previous version software is installed, it must be uninstalled before installing this version.

• LaserJet Pro 400: Watermark not printing on Laserjet Pro 400 on Windows 8

  On the computer of Windows 8, watermark does not print on Laserjet Pro 400 connected by USB. Please note: the function watermark works on other printers not HP, as our networked Ricoh copiers. The printer prints a watermark on a Windows 7 computer. Using the driver package LJM351_M451_Series-12200-drv_installer.

  Very hard to advise without additional evidence (such as samples).

  With my Windows 8.1 Pro 64-bit system, I can print watermarks on my LaserJet Pro MFP color 400 M475dn (equivalent of MFP M451) device.

  Attached is a zip container file:

  • Small text in the abcde.txt file that contains the text "abcde".
  • Print file abcde.prn contains the print job generated by opening the text file in Notepad and by printing the document (using the driver of HP LJ300-400 color MFP M375-M475 PCL 6 (61.120.5.12262) UPD version 5.3.0.12262), by specifying the "SAMPLE" watermark with the default settings; exit 'captured' by using the option "print to a file.
  • Text file abcde.prn_analysis.txt contains an analysis of the contents of the print queue.
  • PDF file abcde_scan.pdf shows a scan of the printed output by sending the contents of the direct .prn file to the printer port.

  Try to send the contents of the .prn file direct to your printer port; for USB connect, you must use something like:

  copy  /b  abcde.prn  \\computer-name\share
  

  in a Windows command prompt session, where:

  the computer name is the name of the workstation;

  share is a share of the Windows printer instance name.

  The resultant prints show the watermark of the SAMPLE ?

  If so, then the printer handles the commands to the printer (in this case using PCL XL) OK.

  Can generate something similar to your driver for analysis?

  [You will probably need help moderating to attach files in this forum].

• printer HP Laserjet P3010 Series for Windows 8, 64-bit driver

  I can find the printer driver for this printer, but he doesn't mention Windows 8, 64-bit as a systems supported. Should I use another driver, or do I have to download the driver and it works well even when? (I'm not in the same place as the printer and cannot try it.) When I'm with the printer I don't have internet access.) I'm only in a location with appropriate internet access two or three times a year, so I'd like to get the correct drivers now!

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a printer. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps.

  According to this document your supposed to run Windows Update.

• Driver printer HP LaserJet 2200 d for Windows 7 - response

  FYI - got a new HP laptop with Windows 7 Home Premium. I had problems with the HP LaserJet 2200 d driver that ships with Windows 7. The driver provided with Windows 7 is for the PCL5, HP LaserJet 2200 (which is an older driver and let you tell the printer Config in Windows you have duplex, and that you have several input paper trays). After some troubleshooting and Explorer, I installed the HP LaserJet UPD PCL6, on the site of HP. Bingo! The PCL6 driver allows you to set up the printer as a duplex and configure the printer with tray 2, tray 3, etc.

  1 Please tell me the complete configuration of the system

  2. install the latest driver of printer at the bottom of the link

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=28862&locale=en_US&TaskID=135&prodTypeId=18972&prodSeriesId=28861

  3. update the latest drivers from the HP website in the BIOS

  4. Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  5 solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems?SignedIn=1

  6 troubleshoot network printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  7. change your default printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  8. free printing software

  http://www.HP.com/global/us/en/consumer/digital_photography/free/software/printapp_index.html

  Guilbert

• install the printer driver HP Laserjet 1020 windows 7

  Hi all

  I am here to share my idea to install the printer hp laserjet 1020 in windows 7.

  There no driver for windows 7 until mid-November.

  I installed the driver for laserjet 1020 on windwos 7, here is the method to install the driver of windows 7 for laserjet 1020.

  1. 1st download all laserjet 1020 base of the printer driver for windows vista. You can it to the bottom of this link

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategor y? product = 439320 & lc = en & cc = us & dlc = en & lang = en & cc = us

  2. After you download the driver for vista check it out same exe file with winrar and then go to Device Manager, then HP laserjet 1020 which is indicated as a device unknown and do right click on it and after this update the driver

  3 and after that go to the folder where extarct vista driver exe and select it.

  novel I ran no exe file.

  Thanks for reading. hope it will work for you

  4 and it will be installed without any problem like me.

  take care of all.

  Mokhtari

  Edit by Katie_H: fixed broken link

  Hello, again and again

  Here I downloaded the HD video to see better the HP Laserjet 1020 driver Windows 7

  If you have any questions please conatact me through yhis post or respond to it.

  Is this useful? Please let me know

• HP laserjet 1020 how disable duplex printing

  I've updated mny Laserjet 1020 driver on Windows 7 and now the printer default to double-sided printing, but I don't want this option turned on. I can't find any property where I can disable this default value.

  Glad to see that you have solved the problem. Just to make this clear solution for everyone... I have attached a screenshot and the directions below on how to cut manual duplex printing...

  Go to your printer icon. Click Printing Preferences. Click on the finish tab and make sure that:

  1. to print on both sides (manually) = checked. You can get a pop up with each print job after that, so beware

  2. NOT to print on both sides (manually) = unchecked.

  Additionally, make sure that when you print a document that your game your appropriate printing preferences by clicking on Print Properties (from the application you are printing from) and then making sure the impression on both sides is clicked or says no

  

• HP Laserjet 1020 & Windows 7

  Hi all

  I am here to share my idea to install the printer hp laserjet 1020 in windows 7.

  There no driver for windows 7 until mid-November.

  I installed the driver for laserjet 1020 on windwos 7, here is the method to install the driver of windows 7 for laserjet 1020.

  1. 1st download all laserjet 1020 base of the printer driver for windows vista. You can it to the bottom of this link

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-58554-1&LC=en&DLC=en&cc=us&...

  2. After you download the driver for vista check it out same exe file with winrar and then go to Device Manager, then HP laserjet 1020 which is indicated as a device unknown and do right click on it and after this update the driver

  3 and after that go to the folder where extarct vista driver exe and select it.

  novel I ran no exe file.

  Thanks for reading. hope it will work for you

  4 and it will be installed without any problem like me.

  I created a video about above mentioned methtod to install the driver for hp laserjet 1020 in windows 7 with vista basic driver (Compatibility Mode)

  http://www.YouTube.com/watch?v=2OSzvW4gMIU

  take care of all.

  Mokhtari

  Hi all

  I'm back with good news in Laserjet 1020 car is now available for windows 7...

  Here is the link

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?OS=4062&softwareitem=bi-58639-2&LC=en&DLC=en&cc=us&lang=en&product=439320