Printer HP Photosmart C6150 all-in-one say it supports ePrint.

Similar Questions

• Printer HP Photosmart C6150 all-in-One. The Error Message ink system failure, error: 0xc18a0001

  I have a HP; hotosmart C6150 all-in-One printer. My magenta ink cartridge ran out of ink. Several days passed and I would like to select print using only black ink cartridge. Now my printer has stopped working. I now get the message ink system failure, error: 0xc18a0001. Just in from a new cartridge HP magenta ink and installed but I keep getting the consignment: ink system failure, error: 0xc18a0001. How can I get my printer working again?

  [Personal information]

  The printer service: to replace. If it's under warranty we achieve for you if you call 1800-474-6836. If you are not in the warranty, we offer a few solutions for you. We always have available agents. Please call anytime.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

• I have a Photosmart C6150 all-in-one printer and too HP software. I can remove it?

  I have a Photosmart C6150 all-in-one printer and too HP software.  I can remove it?

  I have HP customer Participation Program 7.0 (245 MB), HP Document Viewer 7.0 (3.09 MB), HP Imaging Device functions 8.0 (2.44 MB), HP Photosmart all-in-One software 9.0 (15.65 MB), HP Photosmart Essential (11.15 MB), HP Photosmart Prime Software 6.5 (245 MB), HP Photosmart, Officejet and Deskjet 7.0.A (44,35 MB), the HP software update (3.42 MB), HP solution Center 7.0 (3.09 MB). (see screen capture below)

  

  Hello

  It is to your liking, in fact BUT in the list if you want to use all functions, you must keep all except 'Participation program.

  Kind regards.

• my printer hp photosmart c7280 all-in-one

  my printer hp photosmart c7280 all-in-one does not stop

  Hello! Welcome to the @Lukewp forums

  I read about how your printer will not turn off. My best advice would be to unplug it from the wall and let it sit unplugged for a minute or two.

  Try turning the power on to the top and see if this is useful, and if you can feed it to the wide by the power button.

  Let me know the results

• New printer hp photosmart c410a all-in-one

  I use the new printer hp photosmart c410a all-in-one and have a paper jam in the printer.

  Need help I can not easily see the paper blocked under the trays.

  Thank you!

  Hello

  Below the document should help you remove the paper jam:

  http://support.HP.com/us-en/document/c02110413

  Hope the information provided will help you!

• What is the difficulty for printer fault General 0x61000f6 for a printer hp photosmart premium all-in-one?

  1 HP Photosmart Premium all-in-One Printer (309 (a)

  2. Windows Vista 64-Bit family

  3. the general printer error 0x61000f6

  4. no change known to printer before developed problem

  0x610000f6 error code is an indicator of a jam of transport in the Photosmart C309a. Please see the document located here for the procedure to help fix a carriage jam.
  
  Let me know if it helps.

• HP photosmart all-in-one b209a does support eprinting

  HP Photo smart more B209a allow e printing

  Hello

  The B209 series does not support ePrint, but you can use HP ePrint home & Biz or HP ePrint Mobile App. Please see the following link for more information:

  http://WWW8.HP.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.HTML?app=TCM:245 - 1044333 & platform = tcm:245 - 1044335

  Kind regards.

• How to install my printer hp photosmart c4485 all-in-one on laptop with the windows operating system 7

  HP photosmart c 4485 all-in-one stopped printing in color, tried new cartridge, but still the same, uninstalled the thought of hp

  Just reinstall, no disc compatible windows 7

  Hello t_mccluskey

  You can find the driver for the Photosmart C4485 on the link below. If the color does not continue to print, try the second link for troubleshooting print quality. Let me know if you encounter any problems or the problem persists.

  Photosmart C4485 software (Windows 7)

  Missing, faded or dull colors

• How to set up printing wireless Photosmart C8180 All-in-one printer.

  My os is Windows 7 64 bit.

  I want to make my printer wireless.  I had it connected to a USB port and after disconnecting I do not know what com to use.

  The easiest way is to connect your printer to your router with an Ethernet cable.  If this is not possible, you can create a wireless connection to the router.  On the front of the printer: Setup > network > Wireless Setup Wizard.

  Once the printer is connected to your network (wired or wireless, it is indifferent), go to start > Control Panel > printers and delete all instances of the printer.  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get the IP address of the printer on a wireless network Test page, printed on the menu of the network printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Leave the printer HP photosmart C5280 All in one printer, Windows XP, to printing several pages

  Printer was working fine a few months ago. nothing has changed since then, except now when I tried to copy 2 or several pages on a single page/sheet of paper, I receive one copy on the half of the page. The other half is empty. I tried 4 pages on a single page, always I only have one page on 1/4 of the page.

  I have uninstall and Reinstalled the software. I don't know what model do?

  There, can someone help me? Of course, I would appreciate your help

  Very well.  You will need make the document a two page document.  Just copy what you have on the first page and paste it on the second page.  This should make everything feel right.  You must have the number of pages to print on one page in the document before it will print.

• printer hp photosmart 6510 all-in-one that is no longer printing from wireless router

  We are a company of cross-Cross-Country/letters/heavy-long-mail.  We need the ability of the State permitted by e-mail to our drivers in their trucks, no matter where they are in the country.  This particular case is one where the printer worked and works very well, for 6 months.  Yesterday, 29/11/2012, it has stopped working.  We had our printer driver restart and it still does not work.  What should I do?

  Looks like you are using a (lighter cirarette) 12V to 120V ups.  Not only the tensions are different, that they must also convert DC to AC.  The result can be a few strange waves that the printer may not like or wait.

  I don't know what to tell you other than to stop and plug the printer into an ordinary wall outlet.  You might search high inveters of range.  Google "inverter pure sine.

• installation printer hp photosmart c4400 all in one series

  just received the printer above.  I tried to load on my windows 7, but it comes up with a message to say is is not compatible with windows 7 and to get an update ofwww.hp.com/go/windows7.  When I go on this link, it says is no longer available to go to microsoft.  what I do then, I'm a complete novice with computers, so if someone had the answer can you explain in detail

  Go to the website of HP (http://www.HP.com/cposupport/Loc/), click on the link for support and
  drivers. Check the box to download the drivers and software, then put your
  Model number of the printer in the search box. You will see the drivers and
  software that are available for your printer.
   
  "feljo" wrote in message
  News: * e-mail address is removed from the privacy... *
  just received the printer above. I tried to load it on my
  Windows 7, but it comes up with a message saying it is not not compatible with
  Windows 7 and to get an update of www.hp.com/go/windows7. When I go to
  It is no longer available to this link, it says to go to microsoft. What should I do
  Then, I am a novice complete with computers so if someone had the answer
  can you please explain in detail
   
   

• I have a Photosmart C6150 all in one that I connected to a Mac, and it won't do anything

  When I plug my photosmart so the computer or not it is only showing that it is turned on and that there the insignia of hp and a bar underneath, also begins to turn and the.  the bar under the sign of hp has something white and black back and forth.

  I plugged it into my mac, but right now, it is not connected to the computer.   Can someone help me please...

  TKU

  I didn't say anything on a huge discount.  The cheapest place to buy printers HP (especially the models of last year) is often shopping.hp.com

• the printer hp photosmart c7280 all-in-one has a need to use with ipad2 airprint capability

  The c7280 printer has feature WiFi 802.11 g.  I have the connection from Verizon Wireless.  Y at - it somehow I can use to do wireless printing from my iPad 2.

  There is! You can use a named application: HP Home & Biz <-- click="" that="" hyperlink="" to="" read="" about="" the="" application.="" you="" can="" download="" it="" directly="" from="" your="" ipad="" in="" the="" apple="" app="" store.="" here="" is="" a="" how="" to="" on="" how="" to="" use="" to="">

  Printing from the Mobile device to printers of non-Web-Enabled (No. AirPrint or ePrint Support)

  I hope this helps! If you have any other questions do not forget to post them. Good luck!!

• Printer HP Photosmart C7280 all-in-one takes a long time to implement

  Does anyone else have the problem of the printer takes so long to recalculate or set up?

  Hello

  What operating system is installed on the computer?

  I suggest you to refer to the article and see if it helps:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=36481&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3204785