the printer hp photosmart c7280 all-in-one has a need to use with ipad2 airprint capability

Similar Questions

• my printer hp photosmart c7280 all-in-one

  my printer hp photosmart c7280 all-in-one does not stop

  Hello! Welcome to the @Lukewp forums

  I read about how your printer will not turn off. My best advice would be to unplug it from the wall and let it sit unplugged for a minute or two.

  Try turning the power on to the top and see if this is useful, and if you can feed it to the wide by the power button.

  Let me know the results

• Printer HP Photosmart C7280 all-in-one takes a long time to implement

  Does anyone else have the problem of the printer takes so long to recalculate or set up?

  Hello

  What operating system is installed on the computer?

  I suggest you to refer to the article and see if it helps:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=36481&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=3204785

• Leave the printer HP photosmart C5280 All in one printer, Windows XP, to printing several pages

  Printer was working fine a few months ago. nothing has changed since then, except now when I tried to copy 2 or several pages on a single page/sheet of paper, I receive one copy on the half of the page. The other half is empty. I tried 4 pages on a single page, always I only have one page on 1/4 of the page.

  I have uninstall and Reinstalled the software. I don't know what model do?

  There, can someone help me? Of course, I would appreciate your help

  Very well.  You will need make the document a two page document.  Just copy what you have on the first page and paste it on the second page.  This should make everything feel right.  You must have the number of pages to print on one page in the document before it will print.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.

• Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  Photosmart C7280 all-in-one printer error ink system failure 0xc18a0001

  How can I solve this problem?

  Other suggestions for this problem has not worked for me, but the info at this link on how to reset the computer worked! I thought I was headed to the store to buy a new printer, but this fixed.

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1/

• HP Photosmart c7280 all-in - One Mac 10.7.1 (Lion) "Double" option is grayed out and cannot be used?

  I have a HP Photosmart c7280 all-in-One printer and a Macbook Air running OS Lion (10.7.1).

  I'm trying and who need to print via the option "Double" that appears under the menu of "Layout" drop down tab option, the option 'Double' however seem to be grayed out as if you are not allowed to use it.  I'm sure this isn't the case, I don't know how to unlock but I guess?

  I just made sure all my software was updated and is currently.

  Everything is perfect on the printer and I used it for years, thank you!  I just want to know what on earth am I doing wrong or need to do to unlock this "Double-sided" parameter, so that I don't waste a ton of paper!  Thanks again!

  Sincerely,

  DAP413

  Hi DAP413,

  To actiate the two-sided accessory, you have to enable the printer settings:

  -Enter in System Preferences > print & Scan

  -Double-click the name of the Photosmart printer to open the print queue.

  -Click the printer setup button

  -Click on the driver tab and make sure the duplex printing accessory option is checked.

• Photosmart C7280 all-in-One with HP Premium Plus Photo A4 Semi Gloss paper

  For the past two years, I have been using the Photosmart C7280 all-in-one, with Premium Plus Satin A4 Matte Photo paper and have gotten excellent printing results.

  Now that this article is no longer available I just bought some suggested alternative, which is Premium Plus Semi Gloss; but I am surprised and very disappointed by lower printing results.

  Compared to the Matt satin results, they are very much less clear and the colors appear pale and lower.

  Has anyone had similar experiences and, if so, found a solution?

  Hello graham_jester

  It is up to you. In general, the solution is marked when a particular post has solved your problem or an appropriate workaround solution. In any event, I appreciate the gesture.

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• Photosmart c7280 all-in-one

  Hello

  I recently used XP home on my computer and now install W 7 32-bit

  Can I print the pages dubbelsides in XP but now I can only print 2 pages on a paper dubbelsides when I select print dubbelside.

  I have install the complete software solution from HP website for the HP photosmart C7280 all-in-one device.

  Is there a solution for this problem.

  I want to print each page on one side of paper instead of 2 pages on one side of the paper?

  thakns for the answer.

  

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• Where is the USB port on the printer 4500 hp envy all-in-one

  Where is the USB port on the printer 4500 hp envy all-in-one

  So the question for your answer:

  Compatible products for: HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)

  Color Multifunction and all-in-one HP Officejet Pro 8500 all-in - One Printer series - A909 HP Officejet Pro L7500 all-in - One Printer series Mobile inkjet printers HP Officejet H470 Mobile Printer series Specialty Inkjet Photo HP Photosmart A520 printer range Printer HP Photosmart A620 Printer HP Photosmart A630 Series of HP Photosmart A820 Home Photo Center Printer HP Photosmart B8550

  And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

  For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

  All the best...

• New printer hp photosmart c410a all-in-one

  I use the new printer hp photosmart c410a all-in-one and have a paper jam in the printer.

  Need help I can not easily see the paper blocked under the trays.

  Thank you!

  Hello

  Below the document should help you remove the paper jam:

  http://support.HP.com/us-en/document/c02110413

  Hope the information provided will help you!

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software