printer ink tank
Once upon a time, I could click somewhere and get a rough list of the State of the ink cartridges (ink to the left). Have been unable to do since the update driver. How to bring back this tool?
Hi there Jay1940,
I'll see what I can do to help out... which model of the printer and the computer operating system that you have?
In addition, most printers have a sort of way of saying the façade ink levels. Usually, it is a symbol that looks like drops of water colored and pressing, it should bring up a screen showing the approximate levels.
Tags: HP Printers
Similar Questions
-
I pressed by accident in the menu of my printer "ink tanks cleaning. I don't know what that means exactly. I tried to stop the process, but it did not work because my printer had already taken control of my computer. My printer model iseskjet J110a series. Please tell me what to do. Is this something wrong?
Hi christaras,.
Welcome to the HP Forums!
I see the ink tank cleaning that happens with your HP Deskjet J110a, and I'm happy to help you with this problem of ink!
This process is not bad, it's just picking the best quality print cartridges. All you have to do is wait until it finishes.
Hope this helps you and have a great day!
-
I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.
Hi marsha3236,
To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern. If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink. To print the nozzle check pattern and make cleaning, please follow the steps located here.
If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.
-
My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full. What bad past and how to fix it?
If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783
If all goes well. -
Will not print black after replacing the black ink tank
After replacing the black ink tank, the printer does not print black data (text or graphic). I ran printing HP and scan doctor utility and printed assessment page. The text is printed in a pale blue color. Gray scale apperas block (far right) to have no black content and has a hint of cyan.
Printer:
HP Officejet 6000 E609n
Thanks in advance for any help
OK because that is a thing of warranty which may be worth dip the printhead as described below...
(1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
(2) remove all ink cartridges, then remove the print head Assembly.
(3) gently put the printhead nozzles down in water and soak for 5 minutes.
(4) remove the print head and gently dry the electrical contacts.
(5) replace the print head in the printer and then reinstall the ink cartridges. -
HP Officejet Pro 8500 has... Think new HP ink tank is empty.
Printer stopped working and asked a new magenta ink tank. I put a new reservoir of HP, but it keeps asking for a new. I'm sure that wasn't too empty... Please advise...
Hi, James.
What version of Windows are you using?
Make sure that the cartridges are installed correctly
Start > type services.msc
Scroll down to print spooler
Click with the right button on spooler and select stop
Wait for Windows to stop the print spooler
Close this window
Control Panel > printers folder
Right-click on the printer icon
Select open
If there are documents to print, waiting
Click file > cancel all Documents
File/close panel
Unplug the printer from the computer
Unplug the printer from wall outlet
Wait 5 minutes
Printer of the plug in the wall socket
Plug printer into computer
Go back and start the print spooler as shown above
Try printing again
-
IIC system with non-move ink tank
Is there a HP printer which is the printhead on the printer, the ink tanks are separate and do not move. The tanks are connected to the print head hoses. During printing, only the printhead, not tanks?
I've seen printers HP with IIC that the ink tanks, well separated, do sit on the printhead and move with it.
Hi thanhhuy456,
The new models have transistioned to the use of other mechanisms of printing. If the first printing mechanism, you may be able to find one of the older printers who have what you want, listed below. To learn more about the products HP, click here.
- HP Officejet 8500 series
- HP Officejet 8500 series
I hope this helps!
-
My Photosmart C410a printer a lot of ink tanks that are used to catch ink when the cartridges are cleaned or the preinter passes through a print prep cycle. I need help on how to access these tanks to clean them. These tanks are located under the printhead in the corner before right to the printer.
Well, if it is no longer under warranty, you can try to sop some of the ink. With the printer, open the access door as you would to change an ink cartridge. Once the carriage stops in the Middle, unplug the power cord at the back. This way the transport will remain in the Middle, and you will not work inside a live-powered device.
You can sop part of ink with q-tips or something similar. But, be patient and slow, this can be very messy. Don't let the ink on things that it is very very difficult to get out. Once you get it sopped up to your satisfaction, close the door. Connect the power cord to the back of the printer and run it.
Don't forget to not pick it up in the printer with the fixed supply cord, on the one hand, there is a time limit on transport sitting in the middle on some models, and if it is powered, it can itself reinstall to the right without prior notice. You don't want anything in fashion, like a finger, as appropriate. Leave the power cord only while you are there is the safest way.
-
I have an Office jet Series 6000 E609a printer. I was running Windows 7 when I installed this printer. I have recently installed Windows 8. Since this change of operating system I can not access the display of the ink tank. Recently, I ran out of ink yellow and not had any warning of this problem. What can I do to fix this?
Thank you
Hi 711
I understand that you need the drivers for the Office jet Series 6000 E609a printer.
I have provided a link for Win8 32 bit drivers. When the page loads, you must click on the download icon.
I have provided a link for Win8 64 bit drivers. When the page loads, you must click on the download icon.
I hope this helps.
-
OfficeJet 4630: Install new printer - ink cartridge problem
I'll put up a new HP Officejet 4630. I installed two cartridges of HP61 that came with the new printer. The menu of the poster printer "ink cartridge problem, the following ink cartridge needs to be replaced" followed by a black circle. How a new cartridge would be acceptable?
Follow-up of your steps. Cartridges still a problem in the printer display. Took printer at Staples. The store manager confirmed my status then loaded 2 new cartridges (free) the sales basket - printer worked. Staples deals custormers good!
-
I am looking for a download secure portal MyEpsom view on my Epsom printer ink levels
I am looking for a download "MyEpsom Portal" for my Mac so that I can watch on my Epson printer ink levels. It seems that for Windows which I did not. Can anyone help?
Lynne
Have you checked the system preferences > printers and Scanners > print from there you see a button Options and supplies
Like this.
Have you checked the Epson website for drivers/software for Mac OS X. for your printer scanner model.
-
me not saying the printer ink levels
How can I get the computer to let me know the printer ink levels?
Technical issues do not belong in the forum comments so I moved your post to the windows 'Hardware and drivers' forum. Always include your version of Windows when you post.
Monitoring ink levels is a function of the printer driver. Contact the manufacturer of the printer for a solution.
-
Kodak ESP5AIO printer ink cartridges ok but print very faintly
Printer ink cartridges ok but feel very low, troubleshooting says everythings ok. Any ideas?
Hello
1. which version of the Windows operating system is installed on your computer?
2 have you made changes on the computer before this problem?
3 are you facing the question with any specific application?
I suggest to print a test page for the printer and check.
http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page
Reference:
The printer prints part of a page, prints blurry ink or prints faded or inaccurate colors only: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
Since you are faced with the question with the printer cartridges, it would be best to contact the manufacturer of the printer.
-
The message on printer ink system failure
Have a message to get HP Office jet 6500 on printer ink system failure
Anyone? Thank you
Peebles
There is a document for ink system, for the Officejet 6500 failure, found here.
Hope it will help Peebles.
-
How to take the printer ink cartridges OfficeJet 6700 cart
I have a printer of HP all-in-one OfficeJet 6700. When I inserted a new cartridge, there was a false message that says the cartridge was exhausted and cannot print. I tried 3 times with 3 new cartridges with the same result, so I called HP Support. They sent me another printer parts and missing parts had to come from my old printer. I need to remove the old printer ink cartridges carriage and install it in the HP an Envoy. I can't seem to understand and am afraid to break if I push or pull to hard. Does anyone know how to do this?
HP technicians two first talked on the phone told me there was a lock on the side to get (that I never found). The third stopped in the middle of our conversation, he looked up and said that HP 6700 printer ink cartridges carriage is not removable. Thanks for your advice and I hope that this information might help someone else. - Paw - Paw
Maybe you are looking for
-
No audio output device is installed
audio does not work. When I take the pointer to the audio symbol in the taskbar, it reads "no audio output device is installed". pls help me solve this problem
-
Error when updating the Bios Equium A60-155
Hello. Here, I have TOSHIBA Equium A60-155 MODEL No.: PSA67E - 00300C8J "I tried to update the bios, follow this thread" [http://laptopforums.toshiba.com/t5/Drivers-and-Utilities/Equium-A60-BIOS-Update-Problem/td-p/99434] ". but I got the error, as i
-
Is DirectX 10 or 11 DirectX 9-compatible graphics card?
Recently, I've been using Windows XP Professional SP3, and I realized that my on-board graphics card is old. So I decided to buy a new one and replace it. The problem is Windows XP only takes to support DirectX 9 .0c and I do not see much cards suppo
-
should what program I use to open a dll file?
My computer has been recently cleaned and I replace some dll files, but I can't open them. What do I need?
-
Unable to connect to the virtual wifi
Hello I can not connect to the virtual wifi via android. on my old laptop with windows 7, it works the same way.I created it with commands cmd: command netsh wlan set hostednetwork mode = allow ssid = "MySSID" key = "Mykey" keyUsage = persistent nets