printer is dead?

Similar Questions

• HP4500 Officejet: my printer is dead

  Factory reset does not help. I disconnected the wireless and wire. I hit the reset of the printer (#6) and tried to print a test page (x). No joy.

  Powers of printer OK and tricolor ink has run out. I hesitate to buy another cartridge because these cartridges do not work with the new HP printers, and it increases my wasted money. He just sits in a function to always (align the cartridge or the copy or the closing down), while it moves sometimes stupidly white pages of paper in and out of the feeder.

  It's about 4 or 5 years.

  Any other ideas?

  Well, I can't align cartridges if the color ink is empty, then you might see if you can find a really cheap replacement on eBay.

  I have fixed a lot of printers, but there is a point at which it's time to call it quits and buy a newer model.

  When you buy a new control to the printer, the cost per page before you buy it you can usually find their number somewhere online.

  I also recommend paying with a credit card that doubles the manufacturers guarantees.

• USB port at the back of the printer is dead

  The usb port on the back of my all-in-one officejet 6310 is no longer active - has no electric output. Is there no repair for this other than a dismantling and then fix it, if possible? This old dog is a printer faithful backup for a few years and it seems a pity it ship for scrap.

  This printer has an Ethernet port. You can always use this port and connect wired or wireless.

• 15 HP - printer F380: dead Solution Center

  Today, I scan a document; I click the icon solution centre "centro soluzioni HP" as usual, but it does not work. The first image of the app flashes for a moment and then disappears. Everything worked fine until a few days ago, surviving the W10 migration (from 8.1) feared. What's happened since I've used the last time? What can I do? I tried the application MS analysis, but it is very limited; No pdf, multipage control.

  Here's a solution:

  Enter "View installed updates" in the search bar of Windows.  It will show you an option in Control Panel.

  Click the appropriate option.

  Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  Click on uninstall and work through all the guests.

  Once uninstalled, the HP Solution Center will work.

• HP Officejet 6600: my printer has been idle since 12/12/2014

  I'm back from my vacation here a break at the marin dealer that I work and my printer is dead in the water. (Perfect for a boat dealer analogy)

  As soon as I woke up the printer to be slowed for a little over a month, I had to replace all ink cartridges (and it is always showing black as being almost empty), I printed an article but now I get a generic message that there is a problem with the printer or ink system. I have it turned off and unplugged the power cord several times without success.

  Any advice?

  Well, I got running again in uninstalling and reinstalling the black ink cartridge. I guess that I faked out.

• (Ink Cli 8) Where can I find a list of EVERY single printer that uses Cli 8 ink cartridges?

  I bought a set of Cli-8 cartridges when I owned a MP510 printer, but the printer is dead.

  I am now looking to buy an all-in-one printer that uses cartridges Cli 8 if the don't to lose.

  Or should I just buy a newer model of the printer? I looked on Amazon for printers, but none of the printers listed seem to be compatible with ink.

  Hello.

  Here is a list of printers that used the CLI-8 series ink tanks.  Please note that since these printers have been out of production for many years, they may no longer be available to most retailers.

  PIXMA MP600
  PIXMA iP6600D
  PIXMA MP970
  PIXMA Pro9000
  PIXMA MP500
  PIXMA MP830
  PIXMA MP960
  PIXMA MP800R
  PIXMA MP810
  PIXMA MX850
  PIXMA Pro9000 Mark II
  PIXMA iP4500
  PIXMA iP4300
  PIXMA iP5200
  PIXMA iP6700D
  PIXMA MP800
  PIXMA iP5200R
  PIXMA MP610
  PIXMA iP4200
  PIXMA MP530

  It has not responded to your question or problem? Find more help contact us.

• envy4500 HP does not print (only testpage and partial pages)

  envy4500 HP does not print (only testpage and partial pages)

  Windows 8.1

  the connection usb or eprint even problem

  for two printers ip was added as a port in printer properties

  Help, please

  old brother printer is dead and this news does nothing

  Problem was new printer, new black cartridge but cartridge did not work! Installed another and all = ok.

• 5520: print of posters on HP printers

  I had an HP printer and print driver had the facility to take an A4 document and expand it to print on sheets of 4 or more which, when ready and together, have created a larger poster. Unfortunately, this printer is dead, and the new printer driver doesn't have the same capabilities.

  How can I find out in advance what HP printers have the ability to post mulisheet - it doesn't seem to be a simple way to ask HP support.

  If not, is there another driver I can use my current printer - a 5200 HP all-in-one - or a piece of software that can do the same thing?

  Hello

  All recent HP printers no longer offers print Poster, such models offered, but older.

  You can try to set another pilot and check to see if that can help you:

  1. From the Control Panel, right click on the printer and select printer properties.
  2. Open the Ports tab and notice what port is selected, then close this window.
  3. Click Add printer, then press 'the printer that I want isn't listed.
  4. Select this option to set a Local Port or a network printer with manual adjustment, it should be the last option.
  5. Select the port used by your original printer in the list of existing Ports.
  6. Select HP FRO the component manufacturer, then search for select ad the HP Deskjet 6940 printer.
     Note: If the model is not listed, press Windows Update and allow 5 to 15 minutes until the list of printers appears again, then it will be listed.
  7. Complete the wizard and ty print with the 6940 driver, you will find the option poster in the finishing tab.

  Kind regards

  Shlomi

• recent update of 2600n spooler error killed my printer!

  I have restored, updated, everything!  As soon as the printer is accessible, a spooler service stopped running is displayed error!  Believe it's due to a recent update - one day, everything works fine, the next day, my printer is DEAD!

  Hi frustrated1956,

  1. what update is causing this issue?
  2. What is the exact error message?

  We found a similar question on the HP website; Take a look: 2600n - Print Spooler SubSystem App Error Message

  In addition to the above article, try the following steps
  Step 1: Run the Microsoft diagnostic tool
  a. visit http://support.microsoft.com/gp/printing_problems
  b. click 'Run now' and run the tool successfully.
  c. check to see if the problem persists.

  Step 2: If the problem persists, reinstall the printer
  see install a printer .

  For additional support, post your request in the Forums of HP.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PRINTS ONLY RED ON 3520

  I use a HP Deskjet 3520 wifi laptop HP Pavilion computer g6'd.  Although test prints and head cleaning prints are beautiful multicolored text is mainly printed in red onlhy.  Cartridges new last only 100 to 200 copies maximum.  This printer is dead?

  Tried all of these steps, but still printed all the Red/reddish brown.  Finally gave up and bought new cartridges (only) of color and she has replaced today.  Works!  After getting only 150-175 copies for 30-45 days makes this pretty good Epson printer look.  Thanks for the help, if.

• HP photosmart psc2410xi won't print or scan

  windows7ult running. Dell laptop about 2 weeks ago my hp psc2410xi all-in-one photosmart stopped printing & scanning. The power stays on with glass display time. Have crossed all the hp forums, audited cartridge & ink is fine. changed the usb cables, restarted 5different ways, solve problems with windows, microfix, scan doctor, checked the update windows, uninstalled & reinstalled, cleaned printer did everything, I'm at my witts! All of a sudden everything just stop working without any kind of problems etc... Please y at - there anyone out there that can help me?

  windows7ult running. Dell laptop about 2 weeks ago my hp psc2410xi all-in-one photosmart stopped printing & scanning. The power stays on with glass display time. Have crossed all the hp forums, audited cartridge & ink is fine. changed the usb cables, restarted 5different ways, solve problems with windows, microfix, scan doctor, checked the update windows, uninstalled & reinstalled, cleaned printer did everything, I'm at my witts! All of a sudden everything just stop working without any kind of problems etc... Please y at - there anyone out there that can help me?

  The multifunction device copy yet?  Copy is a function, the unit done without even being connected to something else than to power.  If she can't copy it, the printer is dead.

• Printer appears online in devices and printers, but in offline mode in the print dialog box

  After I plugged an inkjet printer from Canon iP4000 in my computer running Windows 7 SP 1 Ultimate 64 - bit edition, the printer is displayed correctly in devices and printers as a printer online but appears offline in print dialog common used by applications.

  Sometimes, I am able to print despite the problem, but as a general rule, the monitoring software will say that the printer does not Canon.

  In addition, a WiFi adapter sometimes loses the WiFi connection and is unable to find all the networks.

  Tried many things:

  • Uninstall of the printer
  • Manually clearing print jobs
  • Reset
  • Unplug the printer from a USB hub and connect directly to a USB port on the monitor

  I can not easily plug the printer to the computer directly because of the locations of the case of the printer and the computer. I tried to connect the printer directly to my ThinkPad and the printer does work very well in this situation.

  This who can I try to do at this point?

  > modifications

  N ° the problem occurs even after a new installation of Windows.

  > wired / wireless

  Wired

  > Error message

  N °

  I already tried all 4 of the links.

  The printer is dead and the 'solution' is to Canon printer in an electronic recycler so buy a Brother laser printer that takes in charge of wireless network.

• Photoshop CS2 crashing after installing the new Epson printer

  I have just installed a new Epson Workforce 323 all-in-one printerand its job very well. Yay!

  But now PS CS2 crashes on opening.

  Just Photoshop--everything is fine - Illustrator, GoLive, InDesign, Safari, Mail, etc.

  I have an MacPro running OS x 10.4.11

  I have other things Epson - 2 printers (C88 and 2200) and a scanner (1240U) and they were never a problem.

  The C88 printer is dead (I stuck paper inside, then had to tear out, who messed up the print heads and all - otherwise it is always "worked", it was just all wonky), is why I replaced it with this new 323 of labour.

  I was on the phone with the help of Epson and they had no idea about the question of the PS.

  I had a guy online on 'Just Ask' me don't walk through the uninstall drivers, etc - also no help in the end.

  Apple don't know either.

  So here I am.

  Is a known issue with CS2 and Epson? I have to upgrade CS2? Y at - there a patch or something?

  Any help at all would be SO appreciated!

  Thanks in advance,

  Paula

  All patches for CS2 was released several years ago.

  My guess is that the TWAIN driver for the part of scanner Epson crashes at startup.  Disable the TWAIN plugin in Photoshop can avoid these accidents, until you get a newer driver from Epson that doesn't crash.

• Colorlaserjet 2605dn: killed 2605dn printer firmware update

  After what appeared to be the latest firmware 2605dn successfully installed, printer seems dead.  I get no lights (pwr) and no display on the LCD screen after power on.  I do not hear the usual audible indication that the printer starts up but no visual and the printer is now useless.  I tried to reload etc. but there is no such thing as no communication with the printer!  Any help would be greatly appreciated.

  Perry

  Thanks for the reply.  Checked as you suggested and will then attempt the trainer!

• HP Photosmart 7960 no power

  I have had this printer for a few years and now all of a sudden turns.  I checked all the plugs, reset (a minute all disconnected), tried different outlets, etc.  No work anywhere.  Before I throw the printer, you have another idea?

  Did you check with another power agreement and also with the power adapter, keep your Palm on the power adapter if you have and feel if the adapter is hot. If you have an agreement of power instead of power supply then try to replace the power supply if you have one, or you can also replace it with the monitor power cable and then do a test by connecting directly to a walloutlet, if it still does not work then the printer is dead.