Printer prints objects about 1 inch high on paper sticker Avery
I set up a project using the online program Avery and my own program (Print Center Deluxe by Expert soft ware.) Everything aligns well on the test sheet. (Ordinary paper with the positions of the various stickers printed on it).
When I try to print the project on real sticker paper pictures print about 1/2 inch from top.
When I try to adjust the position of the image in a program it prints on the same short distance. I even tried to cut half a inc on top of sticker paper. The results has been the image being still low 1/2 inch.
My printer is a HP Deskjet D1520.
When I contacted HP support, I found my printer out of warranty and they wanted more than half of what it would cost for a new printer to help me.
Is there a solution to the problem or my printer unable to be used with this type of paper. If so, should I choose to replace how do I know if the following will work with sticker paper.
I printed on clear labels full sheet without any positioning problem
Any information I can get will be greatly appreciated
frizpop to {deleted personal information}
HI - if it prints well on paper, but not on labels, it sounds like there may be something to do with the document on the printer type sensor. In whatever program you use, go ahead and try selecting "plain paper" in the type of paper in the printer driver field, after selecting the file, print and choose preferences (or parameters). Sounds to me like the printer is grateful the paper as a photo paper and maybe move all to print without margins.
Hope that helps.
Tags: HP Printers
Similar Questions
-
printed page is not high on paper squared
printed page is not high on paper squared
Tigerlilly wrote: printed page is not high on paper squared
Generally, when the printer displays the pages that are not as you expect, or the rollers that pull the paper in the printer are dirty, or the paper is not properly installed in the printer, causing the rollers to pull the paper into the printer at an angle
Just a few things to check.
-
HP OJ 6500 E 710 print only about 2/3 of the sheets 4 X 6 "
All of a sudden my HP OJ 6500 E 710 print only about 2/3 of the text on 4 X 6 "index cards. The left side of the map is perfect, but about an inch and a half is missing on the right side, just empty. I am at a loss it was working perfectly, the last time I printed cards. Full 8-1/2 X 11 "pages print correctly. Help!
Hi BulaBamboo,
I'd like to see what I can do to help, but have a few questions:
1. what operating system you have on your computer?
2. what type of program you are using to print the cards?
3 have you tried another program?
-
How can I view or print my "about parameters" which are not truncated?
How can I view or print my "about parameters" which are not truncated?
Disable the large text. Settings > general > accessibility > great text > off
-
My L7680 HP Officejet all-in-one prints only about 1/4 of a photo. Help desk services is not a problem. Is there a solution? MHow
Hello
As OEM HP is responsible for the good operation of the printer and their drivers. Check with
HP support, their documentation online and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
HP L7680 - set for your version of Windows
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=2512009&LC=en&cc=us&DLC=en&lang=en&cc=usSupport HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?
Sorry to hear that, but the screen is bad and must be replaced!
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm
Difficulties that the printer will not accept 250 gsm paper past the printhead.
Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.
I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?
Thanks in advance.
Welcome to the @noxasforums.
I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.
Let me know what happens!
Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.
Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!
Good luck!
-
Icons are disabled in a certain area of the browser window. The region starts below the firefox toolbar about 1 inch in length (in the direction towards the bottom) and extends from left to right. All icons in this area are not functional, including those of firefox itself for example the close of favorites in the Sidebar icon.
The top of the Firefox window is unresponsive, inadmissible toolbars - see problematic extensions
- caused by the toolbar Yahoo - https://support.mozilla.com/questions/890908
- caused by Babylon Toolbar - https://support.mozilla.com/questions/890670
-
HP Potosmart 7510, printing from a memory card. Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black. Printing using plain paper, set printer on regular paper, just fine. Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.
Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.
Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.
Tried cleaning the cartridges, alignment printer, print quality status report looks very good.
Door on this forum and general web search. Nothing has yet solved problem.
What should I do? Any ideas/suggestions?
Yes, this is the case on a 7510. I worked on the answer. Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty. The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green. I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort. It's a shame that HP does publish no real information.
-
error message indicates that the new 450 turbo label printer does not support the type of paper 119
error message indicates that the new 450 turbo label printer does not support the type of paper 119
Contact the society of the printer. There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.
-
My printer says it doesn't support of paper smaller than 4.9 / 12.6. I am trying to print a photo on photo paper glossy 4 x 6.
I'm trying to print from IPhoto. Thanks for responding.
-
I can not print envelope #10: gives an error "on paper" OS10.11.4 running
Using a document separate from the Pages to the envelope size, tried several envelopes loading.
Hi @RonD3,
Thanks for joining the Forums of HP Support for a solution to your printing problem.
I understand that you use a color printer HP LaserJet Pro CP1025nw with a Mac OS X 10.11.4 El Capitan computer and you can not print on envelopes #10 because you get an "Out of Paper" error message I would like to help with that.
You want to make sure that you're using the envelopes recommended for laser printers only and that the envelopes are loaded correctly. The printer may not recognize the media which are not intended to be used with it. Here is a support document covering guidelines for loading and printing on envelopes - loading paper and envelopes for the HP LaserJet Pro CP1025nw color printer.
Here is the document of support for seeing the message "Out of Paper" when there is paper or envelopes in tray - "on paper" Error Message is displayed and the printer is not Pick Up or paper source.
Then I would like to reinstall the driver of HP with Apple Software Update. Here is a support document which can serve as a reference if necessary - install a printer Mac driver by using Apple Software Update.
Please let me know if that solves the problem, or if you need assistance.
Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Thank you!
-
Photosmart 6510e cannot print a "screen shot" on ordinary A4 paper?
Hi all, my laptop is down, using an iPad2 I can print with airprint perfectly ok on a4 paper. I select a file of my photo iPads stream, it's obviously a picture, but it is a screenshot and I want not printed on paper a4 ordinary, my 6510 insists on put me a paper size photo glossy, so he usually print anything on paper ordinary a4! Maybe I should add the printer is brand new and I just took it out of the box afterwards, I tried to print the same photo with eprint, same result, why can't print a photo on A4 size paper? Please Tim
Hi TIMMYTOAD,
A screenshot is an image. If you paste the image into an email and send it to an ePrint printer which has a tray photo, the default is to print the image to the photo tray even if it was stuck in an email. There is no way to change the settings. I hope this helps.
-
original title: wireless printer won't networked computer photo-quality paper. Due to office, but no cell phone
I have a wireless HP printer. Desktop and lap top are connected to the printer. Desktop will switch printer on photo-quality paper when asked but laptop will not pass. Tried to change prefereces and still does not work. In the contrary case, it prints fine laptop.
Hello
Install the latest printer drivers in the notebook, and the check.
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
Also try the troubleshooting of network running.
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
It will be useful.
-
I have an OptiPlex 9030 AIO with Windows 7. The opening page is about 1 inch above the bar when I open the page of the low spots, I get there, and when I open it again it is placed in the 1 inch upward. There must be a setting to lock the position full page, but I can't.
Your help would be appreciated. Thank you.
Correction - harvest must be drop.
Maybe you are looking for
-
MI Iphone 6 becomes a bad dream, the orig. battery died.
I bought mi 64 gb iphone September 6, 2014 in US. I live in Colombia; January 2016 battery began to unload faster then normal. In March 2016, the iphone is dead so I went to dealers of the Ishop and told me that the problem was the battery but they c
-
MAC and an Officejet J6410 - well Yes, I had my worst problem
I started trying to figure out how to set the scan destinations on the console of the all-in-one and found this online document, which referred to as OSX10.8 (I actually use 10.9, but thought it was probably the same... maybe not). Here . The documen
-
Defrag XP SP3 - did not finish.
My daughter portable computer is a Dell Latitude D610 with a 40 GB hard drive. I tried to run the defragmentation of Windows, as well as a few very other goo, nothing done. It still shows the fragmentation of 42%. I cleaned it up, ran spyware/malw
-
Hello I can't ask for signatures for the newly compiled code. This habit of work fine, but now I get the message saying "the server is unavailable." Everyone knows about this problem? What can be done to fix this? Thank you
-
Hallo,Wie kan mij helpen.Na last update van LR start niet meer op deze.Geen schrijfmachtiging voor created standaard gebruiksmappen.Tips van Adobe al round niet alle closer.Hotel groet Jeroen.