Printer Spooler needs to restart to network printing

Similar Questions

• Epson Workforce 345 while a printer does not print. message that the local print spooler service is not available and I need to restart the spooler.

  All of a sudden my Epson Workforce 345 all-in-one printer will not print.  I get a message that the local print spooler service is not available and I need to restart the spooler.  What does that mean?

  Hello

  Check with the manufacturer of the printer for updated drivers, support and Forums for
  known issues.

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  If there is that no Windows 7 drivers try the Vista drivers if those that exist.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  ===============================

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with your support and the Forums printer manufacturer.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - devices and printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Print spooler does not restart

  I can't get my print spooler to restart.  Sometimes I can restart my computer and it will start (there are usually several attempts), however, it did not work today and restart my computer is getting old.  When I try to start from the services window, I get a 1053 error message that says: it does not.  I ran all the malware scans and I'm not coming with a problem with a corrupted file.  How can I solve this problem?

  A "HP ProBook" is a computer.  We need the brand and model of your printer.  You should also tell us which version of Windows (Windows 7 Home Premium 32-bit, Windows 7 Pro 64 bit, etc.) and service pack (no, 1) is installed.  If you are unsure, do a click right my computer and select properties for this information.

  In general, the print spooler problems are caused by a corrupt print job or a damaged printer driver. For Windows 7, run this Microsoft Fix It routine--> http://go.microsoft.com/?linkid=9829710

  If that does not solve the problem, and then run this Microsoft Fix It routine--> http://go.microsoft.com/?linkid=9829711

  Note that if you execute the second difficulty, you need to restart after you run it and then reinstall all your printers.  To reinstall your printer, go to the web site of the manufacturer of the printer (not the manufacturer of your computer) and download the correct driver for your system.  For more help with this, please identify your printer and your version of Windows, especially if it's 32-bit or 64-bit.

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection.

  I lose the internet connection

  Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit

  The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection

  Hello

  Control Panel - device - network - manager double-click the used network - power management device
  Tab - uncheck the computer to allow him to turn off the device.

  Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
  Power settings - check the settings there.

  You may reset the default power Plans and and then change them as needed.

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• computer starts but nothing works. OneCare has been stopped, restart, no network connection found, office does not work. Analysis now with the malicious software removal tool, but nothing happens.

  OneCare was 'arrested' will not restart
  Wireless networks - does not and cannot correct
  No program will run if I'm in safe mode
  I did a virus scan with the malicious software removal tool, nothing was found.
  I write this on my netbook - I can't have my laptop online.
  I have no idea what to try next.  I need my laptop!  Help, please

  Hello laughingpaws,

  To help resolve this issue, use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system.

  I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system. I restarted several times now and get the same message. What should I do to ensure that this computer can be upgraded?

  Hello

  Run the windows Upgrade Advisor 7

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  and repost in the windows forums OK 7

  Here is the vista forums

  Windows 7 forums on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Firefox does not start guard saying window needs to restart

  Tried to install Firefox 8 on windows 7

  After installation of windows needs to restart. Tried it, but now seem to be stuck in a loop

  no icon has appeared on desktop or start menu, when i try to atttemp anything all i get is Firefox requires windows to restart when trying another re install
  

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• Satellite C660 - 1 M 0 encountered a problem and needs to restart

  Hello
  Today, when I turned on my laptop before it starts, I get a blue screen says:
  Your computer has encountered a problem and needs to restart. Collection of information.

  What is this problem for?
  My laptop is TOSHIBA Satellite C660 - 1 M 0 i3

  Is this a Windows problem?

  Here is a message I received in Windows7forums on this subject but I don't understand what he means, can understand you for me please? e

  * Re: Heeelp! Your computer ran into a problem! *

  These screens generally include a sentence in the screen "fallen on problems." Usually something like Violation of Watchdog DPC (Deferred procedural call) and are often associated with a bad driver and or a power saving state not supported (sleep, hybrid sleep, hibernate, etc.,)

  First of all, make sure that you have the latest drivers from your computer manufacturer and or the individual device manufacturer's Web site. Then consider whether this computer manufacturer includes any software that may be incompatible with Windows 8 CP or is somehow patented conflict with Windows 8 CP in energy saving power scheme options. You may need to experiment a little, maybe remove the proprietary tools or taste affecting your schema of high performance or even the options down or max.

  The overview of consumption is more or less a new frontier for everyone here to work through this kind of problem is going to be informative and beneficial for all who read your thread, so please keep us posted as to how you are progressing with your current number.

  Concerning
  Randy

  Hello

  Blue screen of death (BSOD) may be caused by software or hardware problems.
  To know if it of really a software problem, you can try running a HARD drive recovery procedure which would fix the laptop back to factory settings.

  What is an option for you?
  If Yes, check this:
  + How to recover a Toshiba notebook with the HDD recovery procedure.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

• R253cl 15 HP: pc encountered a problem and needs to restart. NO LESS driver IRQL OR EQUAL (rtwlane.sys)

  NO LESS driver IRQL OR EQUAL (rtwlane.sys)

  Hi @bazrul,

  Thank you for your inquiry.

  I understand that when you try to start your laptop, you get the error ': PC encountered a problem and needs to restart. " NOT LESS DRIVER IRQL OR EQUAL (rtwlane.sys)".

  I'm assuming you get a blue screen with this error and are unable to load Windows. Is this correct?

  You can start in safe mode?  HP computers - Windows Safe Mode (Windows, 10, 8).

  If you are able to boot into safe mode and that you have installed Norton, you can try to uninstall it as others have said that solved the problem.

  If this is the case and you can again access Windows, run the HP Support Assistant to acquire the recommended updates.

  I also suggest to do the Windows updates.

  Please let me know the results.

  Good luck!

• I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  A / installation ADK

  I need to restart the windows assessment services service to connect to localhost, whenever I start the client WAS

  Hello

  To improve assistance to this subject, you can ask your question in the technet forums.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• I need to reconfigure the network wireless repeated now

  I need to reconfigure the network wireless repeated now.  Internet connection drops and I re - check the box 'use windows to configure wireless network. "  Why this keep happening?

  Provide more information, including the version and service pack of Windows, the brand and model of your computer and the make and model of your wireless adapter.

  In the meantime, however, your description sounds as if you have a utility provided by the manufacturer of your computer by the manufacturer of your wireless card which is competing with Windows for control of your adapter.  You must choose one or the other; You can't have both at the same time.  For a general introduction to the present, see http://www.ezlan.net/wzc.html

• I need to restart aid and assistance

  I need to restart the service help and support, but I need to install security patches.  I need help in the installation of security patches.

  Simply using the windows/microsoft update.