printer: the printer prints in a weird language!

Similar Questions

• Epson Stylus Photo R2880, tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Tried to print thick paper / cartridge paper through the front power and the result is stained with weird colors. Printing through the standard power supply is perfect. Thanks in advance for your help.

  Standigay

  Hello

  This looks like a good question for the support of Epson.

  Help and Support - Epson America, Inc..:
  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  Concerning

• My iMac doesn't work that in safe mode, normal mode the screen layout is really weird. Help, please! :)

  Hi guys,.

  Since yesterday my iMac 27 inches of the end 2009 has acted weird. Text was not good more visible and popupscreen were empty, white or black. (do not know why they are uploaded in reverse)

  

  Then I tried a clean install. Screen was working again fine. Then formatted my drive and installed the new OSX.

  

  Download went fine, but when installing the pop-up screens were not visible.

  

  After a few random reboots on my side, it worked again.  Thus, installation...

  But... Now, I always have the same question. In safe mode, everything works fine, but in normal mode, the screen is *. Pop - up screens are blank/black or white, the numbers are mixed, etc. What it can be.

  I already installed it on an external HARD disk, reset the SMC and the PRAM, Test hardware (message only 1 failure: 4sns/1/40000000: TH00 - 9,000.) "But I think it's because I installed my SSD later, that's why I need to use a program like HDD control to control the fan).

  so... What can be? I've tried everything! If any of you guys could help me, I would like to do a happy dance ;-)

  You have a sensor error. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

  Install El Capitan from scratch

  Restart the computer. Immediately after that the chime hold down the command and R until the Apple logo appears. When the Utility Menu appears:

  1. Select utility disc in the Menu Utility, then click the continue button.
  2. When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) in the list to one side.
  3. Click Delete in the main window of disk utility. A panel will fall.
  4. Define the type of Format Mac OS extended (journaled).
  5. Click on the apply button, then wait for the done button to activate and click on it.
  6. Quit disk utility and re-enter the Utility Menu.
  7. Select reinstall OS X and click on the continue button.

• How to slow down the audio Windows Player speed, for language learning purposes?

  How to slow down the audio Windows Player speed, for language learning purposes?

  I assume you mean videos with speeches.

  1. start playback of the video.

  2 right click on the video then go it to improvements then the playback speed settings.

  You can control the speed of this Panel.

• What is the right way to add a language?

  Hello
  I wanted to show traditional Chinese web pages with Chinese characters
  (for example, hk.yahoo.com).

  I walked into the tab Control Panel / regional and language options/languages
  and choose "install files for East Asian languages".   He asked for the XP CD,
  installed something and seemed to work.

  However, it seems to have turned on a few items for the language entry,
  from what I see in the boot options.  I don't want to enter the Asian languages,
  show only the Chinese web pages.

  What is the right way to set up and get rid of all this stuff related to the input method?
  (the first 4 points here)

  http://ImageShack.us/photo/my-images/341/StartupItems.jpg/

  Richard,
  I have done work similar to what I described.

  I deselected "install files for East Asian languages" as I mentioned above,.
  removed startup items which appeared in msconfig (you can see the 4 in the JPG I posted)
  and restarted.  What this does in fact, I'm not sure.
  Is it uninstalled or disabled just something, I'm not the wisest.
  (For example, the fonts themselves)

  I open IE8 and went to a page where the Chinese characters should be displayed.
  Instead of characters, the text appeared as small squares. But after playing with
  view/encoding, it began to appear normally.  What ever he did, he also worked for Firefox.
  I found a page posted elsewhere mentioned IE8 can you will prompt to download the
  Chinese police if it is not installed.  This moved not, makes me wonder if it was
  there all along.

  Of course, all the other windows dialog boxes and other parts of the interface.
  are English, as it should.  As far as I know, looks like it works the way
  I wanted to.

• In the standalone Simulator, it shows different languages but not by eclipse

  Dear friends,

  When I run the stand-alone Simulator of the Start Menu, it shows several languages in the 'Options', whereas when I trigger it for debugging of eclipse it shows that two languages, there is a solution for the same, please guide.

  Hello friends I am able to solve the problem:

  Version of Eclipse 3.3

  Simulator: for 8900 and 4.6.166 software version

  (a)

  1. add language like: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/How_To _...

  Note: For Arabic is: net.rim.blackberry.lang.ar

  (b)

  1. in the run-> Debug Configuration-> Blackberry Simulator-> (name of your project)

  2. Select the tab 'Simulator', then in the row underneath 'Advanced '.

  3. check the option «Use custom command Options»

  4. and in the text box for "Customized Command Line" add "/ app-param = JvmAlxConfigFile:8900.xml" (without the quotes)

• I subscribed an Acrobat Reader DC and unfortunately this is the version in English I and language of the I want changer pour the french. How do we?

  I subscribed an Acrobat Reader DC and unfortunately this is the version in English I and language of the I want changer pour the french. How do we?

  Hi Linda,.

  By default, it comes Setup language on your computer.

  I will recommend you to uninstall Acrobat Reader DC, run the cleanup tool Download Adobe Reader and Acrobat tool - Adobe Labs.

  Reboot your computer & download Acrobat Reader DC using this link Adobe - Adobe Acrobat Reader DC Distribution.

  * Make sure you choose language as "French" to step 2 for download.

  Let me know if you encounter any problem.

  Kind regards

  Nicos

• What is the best way to add more languages to my Adobe Muse site?

  Hi, I just created a site for an international artist of the work. I finished the site of Muse in 1 language. Now, I want to add 2 other languages on the site that I realized. I would like to add the choice for the visitor to link to the home page (text or in a signpost) to 'their' language. I imagine that the 2nd and 3rd language are part of the same site.

  What is the best way to do?

  Or: where can I find the information in the Adobe-help site? I prefer to read the instructions in Dutch. If this is not possible, the English will be correct.

  Thank you, Martha

  Hi Martha,

  You can consult the links below:-

  (1)How to put in place a multilingual with Adobe Muse website and push it live to Adobe Business Catalyst

  (2)re: How can I create different languages for my page?

  Kind regards

  Neha

• Is pl/sql language of the compiler or interpreter of programming language?

  Hello guys,.
  
  Is pl/sql language of the compiler or interpreter of programming language?
  
  Thank you
  
  Published by: Polat on 14.Mar.2012 09:09

  >
  Is pl/sql language of the compiler or interpreter of programming language?
  >
  The two-

  See compilation of PL/SQL units for running Native in the Doc of the PL/SQL language
  http://docs.Oracle.com/CD/E18283_01/AppDev.112/e17126/tuning.htm#sthref1023

  >
  You can usually speed up the units of PL/SQL compile native code (code system processor-dependent), which is stored in the SYSTEM tablespace.

  You can compile natively any PL/SQL for any unit, including those providing the database Oracle.

  The program compiled natively units work in all environments of servers, including the configuration of shared server (formerly called "multi-threaded server") and Oracle Real Application Clusters (Oracle RAC).
  >

  And this from the section How PL/SQL Native Compilation Works
  >
  How does the Native Compilation of PL/SQL
  Without native compilation, statements from PL/SQL in a PL/SQL unit are compiled into an intermediate form, the system code, which is stored in the catalog and interpreted at run time.

  With native compilation of PL/SQL, PL/SQL instructions in a PL/SQL unit are compiled into native code and stored in the catalog. Native code should not be interpreted at the time of execution, so that it runs faster.

  Because the native compilation applies only to the PL/SQL statements, a unit of PL/SQL that uses only SQL statements may not work faster when it is compiled into native mode, but it works at least as fast as the interpreted code. The compiled code and the interpreted code are the same library calls, their action is the same.

• What is the open script? is a language?

  Hello
  What is the open script? is a language?
  
  Published by: 799636 on October 5, 2010 07:13

  OpenScript is a new (ish) product that allows you to record the scripts used for functional tests / load. The scripting language is Java and is presented in a version of the Eclipse IDE. See http://www.oracle.com/technetwork/oem/app-test/etest-101273.html for more information.

  Wayne

• my printer prints in a weird format from the internet. Looks like lines of script rather than the regular format. any suggestions?

  Every time I have print an article from Internet Explorer, it prints like this...

  I don't know much about computers, but for me, it looks like lines of script.  Why it is not printing in regular format?  What can I do to fix this?

  Thank you!

  From my research, the problem may occur if IE7 isn't the web browser by default. I understand that you have tried to define default IE7. At this point, please follow the steps below to check if it:

  Step 1: Set default IE7 in IE options
  ========
  1. open Internet Explorer Page

  2. click on tools (usually in the upper right corner) and go down to Internet Options

  3 switch to the tab programs, click "Make default" under "Web browser by default" if IE is currently not the default browser.
  4. click on OK.

  Step 2: Set IE as default in Set Program Access and computer defaults
  ========
  1. click on start, and then click default programs (you can find it in the control panel if you do not have a shortcut on the start menu)
  2. click on "set program access and computer by default.
  3. Select custom, and then click to expand the options.
  4. Select "Internet Explorer" as default web browser, and then click OK.

  Step 3: Check the associated registry key
  ========
  1. Click Start, type regedit in the search box and press ENTER.
  2. navigate to the following key:

  Mand HKEY_CLASSES_ROOT\InternetShortcut\Shell\print\com

  3. in the right pane, check that the (default) value data are defined as follows:

  "C:\Windows\System32\rundll32.exe" "C:\Windows\System32\mshtml.dll",PrintHTML "%1"

  4. exit the registry editor.

  Then, restart the computer in order to check the result.

  Source: http://www.technibble.com/forums/archive/index.php/t-6882.html

• Print in a foreign language files

  Print my files in several different foreign languages or scripts - Arabic/Russian /?. This isn't how the page appears when I open, however.  I'm with adobe reader x version 10.1.0 on windows.  Any ideas?

  Open a file and click file > properties > fonts. You say "Embedded" or "Embedded subset" corresponding to the names of fonts? Looks like you found the font substitution because the police information is not incorporated.

  If this is the case, you can 'try' by selecting 'Print picture' in the print dialog box. Either that or request to anyone who creates the PDF file to embed the fonts correctly.

• Please help me to restore the HP Laser jet M1522 English language

  Unfortunately, has always been the default language on Spanish and I don't know any Spanish to get that back into English.

  I bought this new product to off the shelf and have always thought that I have would mess with it later... now that I'm playing with it - I have no idea how to get the English here? Help, please!  Thank you!

  To change the display in English language, please perform the following actions on the control panel of the printer:

• Can anyone advise me on the conversion and submitting CMYK for the first time?   (In a language that is slow and easy to please)

  There is more discussion on this subject (and opinions) that Carter has pills and I have read many of them... but I'm still confused and since I was less than 7 hours to solve this problem, I'm crying out for more help.

  1... I know that I need more to learn about this... but that does nothing my period

  2nd... This is a simple corporate Head-shot that is produced in a print magazine with an article written by my client.

  3rd... The Publisher asked for the photo to be in CMYK mode and since this editor is in the USA, my assumption at this late date is that the standard CMYK color profile - U.S. Web Coated (SWOP) v2 produced by Photoshop is enough.

  I can be on the right track now, but I'm completely side stepping of Lightroom for all editing and staying in Photoshop in Adobe RGB (1998)

  At this time, when I click on view and choose a PROOF, CMYK is selected.  I don't know if it's accurate, or if the selection is premature.

  I plan to complete my edits in PS and then click on IMAGE, click MODE and choose CMYK.           Currently, for my editing process, it is set to RGB

  Hopefully save them as CMYK will be available after changing the MODE, but my save as feature currently available, available only ADOBE RGB (1998).  Also save a copy and a box to include diapers or not.

  Yesterday, when working on this folder, I clicked on the EVIDENCE and CMYK, but I didn't see any difference in the editing...  It maybe because I exported a ProPhoto since Lightroom file as a basis to begin by... I'm not sure, though.

  My concern is as follows... yesterday, I have saved in a CMYK file and it looked fine on my monitor.  I sent it to the customer (I chose the JPG extension) and when she had, the colors were OFF.  She sent the files back to me, and they were indeed average off...  He told me that it was not a matter of calibration of monitor between his PC and mine.   Which brings me to the last question... my monitor is calibrated "to eye" to a company of printer that I use for my regular photography - which worked great!    And unfortunately, at this late date, I can't get a profile of the printer of the editor.

  Thanks for reading all of this... I wonder if my current game plan is sufficient for this late hour...

  No Lightroom

  Edit in Photoshop in ADOBE RGB (1998)

  Keep selection 'PROOF' in CMYK, so that I have change

  At the end of my edit, click MODE and change to CMYK

  Save the file with CMYK to jpg.   (all other types of files are too big for the customer to manage e-mail)

  Am I missing something?

  There are a number of potential problems here, and it may not be at your end.

  First of all, it should be clear that CMYK is not so much a generic "image mode" because it is a description of the specific press conditions. If you produce final CMYK, you need to have the right profile. Do not use Image > Mode, use Convert to Profile.

  Given that, I wonder anyone who does not accept the Adobe RGB photographs for a magazine article, because it involves a process that doesn't is not correctly color generally not up to date and not managed. A typical workflow would today use InDesign, where images are usually placed in their original space of RGB whatever that is. Then the final conversion output CMYK is made as the last step, when you generate a ready PDF to InDesign.

  It helps if you know the final CMYK, because then you can the evidence for that so your file survives the CMYK conversion with the least possible damage (we're talking range cut here, not general color moves). But it is not absolutely necessary, that is why this workflow is relaitively safe.

  Thirdly, CMYK jpeg is itself risky, because several decoders of jpeg (in some software) is not a proper CMYK support. The result can be weird colors. This could well be the problem here, because it sounds as if your customer uses a non-standard workflow.

  So what to do? I would send two files. A sRGB as a reference, which is guaranteed to come out correctly. Then find a way to send TIFF to CMYK version if they insist, or ask them to try to open it in different software. Of course , you should have a calibrated and profiled monitor, but I agree this is probably not the immediate problem here. There is no particular reason that a CMYK file should return to the colors twisted if he opened and processed in color management software correctly.

• How to change the tempo of the bass guitar? no weird noise.

  I clicked on the change of tempo to follow on a bass guitar recorded, but it appears totally artificial and strange, sped upwards or downwards.

  I'm doing something wrong?   why it sounds so weird!

  Please can someone answer this!  It's the same thing if I transpose the bass, sounds strange wobbly sounds.