Printing envelopes 6525

How to print envelopes on a 6525?   Help

Hello

The #14 manual page:

Load the envelopes
Remove the main tray.
❑ If the photo tray is open, press again.
❑ In the main tray, slide guide of width of the paper to the outside.
❑ Remove all previously loaded media.
b. load envelopes.
❑ Insert one or more envelopes in the center of the main tray. The side to be printed on should face downwards. The flap must be on the left side and upwards.
❑ slide the stack of envelopes until it stops.
❑ Slide the width guide to the paper inward against the stack of envelopes up to the stop.
c. push back in the main tray and then open the paper tray Extender.

Kind regards.

Tags: HP Printers

Similar Questions

  • is there a way to print envelopes of card half fold on a hp photosmart 6525?

    Is there a way to print envelopes of card half fold on a hp photosmart 6525?

    Hi KenRum,

    Here is a table with the envelope sizes supported for the Photosmart 6525.

    Type of envelope Envelope size
    US No. 10 105 x 241 mm (4.12 x 9.5 in)
    Card envelope 111 x 152 mm (4.4 x 6 in)
    DL 110 x 220 mm (4.33 x 8,66 in)
    C5 162 x 229 mm (6.38 x 9,02)
    C6 114 x 162 mm (4.49 x 6.38)
    Japanese envelope Chou #3 119.9 x 235,2 mm (4.72 x 9.26)
    Japanese envelope Chou #4 90 x 205 mm (3.5 x 8.1 inches)
    A2 111 x 146 mm (4.37 x 5.75 in)
    Monarch 98 x 190 mm (3.87 x 7.5 in)
    6 3/4 92 x 165 mm (3.62 x 6.5 inches)

    Fold half card envelopes are available in different sizes. Compare the size of the envelope that you try to print to the specifications to determine weather or not, you can print on them.

    Here is a link to another forum with other thread trying to custom Setup paper sizes, this may or may not be useful, but here it is in case you want to browse. > Print two greeting cards envelopes

    I hope this information is useful.

  • Printing envelopes HP Photosmart 6525

    When you try to print envelopes, I get the message on the printer "paper mismatch" I selects the size of the envelope before printing, but it sends just an empty through envelpe.

    Thanks for your post.  Actually, I called HP support line & they managed to solve my problem

  • Black printing envelopes

    Have an iMac, running the latest OS - bought a HP Officejet Pro 8630 - When I try to print an envelope, the result is a totality of the black envelope - crossed the steps recommended to 'repair' grey all envelopes, IE. Reset the printer, remove the printing software, fixed permissions, downloaded the 'new' printing software, installed the printer, restarted my computer - always prints all black envelope...

    Recently upgraded to OS X El Capitan and I can now print envelopes without any problem. I'm guessing that it was a problem of interface between printer drivers and the previous operating system...

  • HP OfficeJet 4650: When you print envelopes

    I bought an OfficeJet a year but, despite a search for 'on-line' manual, I can't find any information about loading and printing envelopes.  If I just load the envelope in the tray (the size of the guides adjustment) the printer screen asks "have you you load paper regular A4 - if"NO"is pressed, it just says: 'document - type A4/paper - plain paper type."  This printer is unable to print envelopes?  If possible, someone would be nice enough to indicate where I can find "an Idiots Guide to...". "Envelope of loading and printing of"!

    Thank you very much

    Jayuu

    Hi @Jayuu,

    If you followed the instructions when setting up the printer and then installed the software on your computer, you should be fine.

    I don't know why this link doesn't open for you. Here's another link - loading paper, cards and envelopes. If this does not work, maybe try to open it in a different web browser.

    You will need to select envelope as the paper type, once the envelopes are loaded. If you tap where it shows the type of paper, like 'Letter' for example, you will finally get a long list of types of paper. You can scroll the list by dragging vertically on the screen of the printer with the finger. The different types of envelope are a way just to the bottom of the list. When you see the type of envelope you want in the list, tap on it to select it.

    Once you have the desired selected envelope, you should be able to print. Here is a support document which can serve as a reference if necessary - envelopes printing (Windows).

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • 6520 cannot print envelopes

    I just bought an eprint 6520. I don't have a PC or a Mac, only an iPhone and the iPad. I can print from the ePrint app, but I can not configure the printer to print envelopes. How to set the printer to make the envelopes (or other pages in size, photos) of the printer itself or through my iPad?

    It's actually very easy. I did load the ePrint and remote apps AiO and mating with the 6520. But, none of these applications would not provide paper envelope in option. So, after having unloaded the printer paper and put some envelopes in the bottom tray I just clicked 'print' of the Pages App where I created my list of the envelope. I could only form 6-8 envelopes into the tray at a time, but he did print correctly.

  • HP OfficeJet Pro 8725: Printing envelopes on HP OfficeJet Pro 8725

    How to print envelopes to go with my cards on this new printer.  On my other printers HP is was no problem, but on this one, I get an error "incompatibility".  This is the standard format (half sheet) by cards.  Help, please!  Thank you.

    Here is my set up in Word.

    Note: it may take some time b4 you see the image as HP has ok it!

  • printing envelopes on macbook pro

    How to print envelopes on my macbook pro using a Brother multi function machine?

    Looks like you should consult the documentation that came with the printer.

  • You print envelopes with HP LaserJet CP1525nw color

    I tried to print envelopes on our printer above.  My document is in Word is formatted accordingly for a #10 business envelope

    Under the terms of the HP help function, I found the info on how to set up my document print options, then it would print correctly.

    The first envelope printed on the side of Rabat; I have reloaded in Tray 1 and was ready.

    The second envelope printed with success so I thought that I understood.  So, I loaded the tray paper with 5 envelopes, hoping to print them massively.  I couldn't get it work when I tried to print 4 at a time.  I got a "Paper jam in tray 2" error and I was not yet using tray 2.  I erased the 'problem' and AN envelope printed with success, then I got the same error message.

    I had 2 envelopes more printed this way, but every time I got the same error message, erasing the machine and 1 printed envelope.

    Frustrated, I cancelled the multiple print job and tried to print envelopes one by one.  Now it does not at all even if I delete the phantom paper jam every time.

    Can anyone help with this?  It makes me nutty.

    Background info: my husband (network engineer) install the printer.  I have over 20 years of experience in processing and usually have good results with appearing on printing problems.  It left me speechless!

    Thanks for any help you can provide.

    Dianne

    The CP1525 allows you to print envelopes. There are two ferries, which can be used. I will describe using only the lower tray. Normally, this tray is used for standard paper.  To use the letter envelopes, you must remove the tray and then make some changes. Remove all paper. There are supporters of blue color paper. Two are used for the width of paper. Move the cursor to the Center so that it will load the envelope with the top to the left. Put the envelope with the printable side upward and the top to the left. Slide the blue paper holders so that they touch the top and bottom. Then push the envelope completely backwards and then move the holder unique blue paper in the front to make it against the envelope. You're ready to print as much as the printer.

    I select the printer properties. I indicate that I am printing an envelope. I had also to indicate the landscape. I also had to move the appropriate print areas where I want to be. Then I added my address and the address to where they're going. I'm not sure that I have everything but it should work well.

    I only did this, but you can use two trays with one who holds a number of pages and the other for a certain number of envelopes.

  • When you print envelopes on P1102w

    Trying to figure out how to print an envelope using MSWord on a P1102w.  I get the flashing light of the attention and never print job cancel rather out them and makes it to the printer.  The manual does not even when you print envelopes.

    Had the same problem using MS Word 2007/Vista. Click on the 'Options' button in the envelopes and labels print window, click on the 'Print Options' tab and under "Feed of" choose "Auto select" in the menu in the menu dropdown.

  • Print envelopes

    I have a7520 Al all-in-one Photosmart printer.  It will not print envelopes.  The envelope feeds through properly, but without the address.

    Hello again -1nana,.

    I see when you try to print envelopes envelope prints without address, you print to your HP Photosmart 7520.

    I would like you to take a look here: loading plain paper, Photo paper and envelopes, please make sure that the envelopes are loaded correctly.

    Once the envelopes are loaded, please let me know the following:

    1. what program you are trying to print envelopes since?

    2. you change the print settings?

    3. What size envelope do you use?

    I'll watch for your reply.

    Thank you

  • Photosmart 6525: auto efax print photosmart 6525

    Efax account and can receive fax, but only show up as an email. Q: a possible incoming fax to print automatically?

    The printer (Photosmart 6525) allow Eprint and connected.

    Appreciate any help,

    Frank

    Hi Frank,.

    Incoming faxes can be printed automatically, for that you must update the HP ePrint email in the settings of efax.

    Connect your user on eFax.com and change preferences as follows:

    • Sign in to your eFax account.

  • HP ENVY 7640: How to print envelopes

    How to print envelopes with HP ENVY 7640 e-all-in-one series?

    Hello

    Please follow the instructions below:

    http://support.HP.com/us-en/product/HP-envy-7600-e-all-in-one-printer-series/6617267/model/6617268/document/c04339981

    Kind regards.

  • HP 7525: Loading & printing envelopes A10 - getting started

    I was not able to locate instructions for loading and printing of envelopes. Where to start?

    Are there templates or do I use trial and error with a word processor, guessing where printing can appear when I fed an envelope?

    With the help of Windows 8 and primitive processor, MS Wordpad.

    Feed envelopes into the tray paper, or from the top of the charger page? Rabat open or closed?

    Anyone know where the signs for this can be found?

    Thank you.

    Happy new year.

    Hello

    I don't know how to print envelopes from Wordpad (it is noot allow you to create the envelope anyway). But for the loading of the A10 envelopes, please use the following instructions (manual page #14):

    Load the envelopes
    a. lift the photo tray.
    ❑ Slide width outside guide.
    ❑ Remove all paper from the main tray.

    b. load envelopes.
    ❑ Insert one or more envelopes in the far right of the main input tray, with envelope flaps on the left and upwards.
    ❑ Slide stack of envelopes until it stops.
    ❑ blade width guide inward against the stack of envelopes up to the stop.
    ❑ Lower the photo tray.

    Kind regards.

  • Want 7645: Printing envelopes

    I have a printer Envy 7645.  I'm trying to print envelope 4.75x6.5.  Message says that the printer sensor does not match the paper size.

    Seems to be a common issue with HP printers.  I am sometimes able to bypass by selecting a standard size envelope which is close to the actual size, rather than to specify a custom size.  It seems that the printer does not detect a real even if incompatibility it falsly detects the moment where there is not a mismatch.

Maybe you are looking for