Printing half a page

Similar Questions

• HP 4700 only prints half the page

  HP 4700 only prints half the page

  Hello-

  Have you tried uninstalling and reinstalling the printer?

• Displays only half a page and screen reads "Document cannot be printed."

  Hello

  I use the printer HP K5400 on a Windows XP PC. I have problems consistent when I print documents from any software I use for example Word, PDF and images. When I try to print, the printer prints half a page, then spits out another page with weird symbols on top. After a few seconds it then prints a test to white, followed by the original document, I tried to print in its entirety. When I start to print, a bubble on the screen tells me that the document cannot print. This problem applies only to this PC the printer works perfectly with other laptops. I tried to uninstall and reinstall the printer and the usual in him reconnecting and resetting the computer, but none worked. How can I solve this problem?

  Your comments would be appreciated

  Hello iloveprinters14,

  Welcome to the Forums of HP's Support.

  I would like to help with the problem you posted on the HP K5400 is not printing Windows XP complete documents. It is good to know that it will work from other laptops.

  I wish you first download and run this critical update to correct a PC Printer Communication issue. After the end I want you to run the print HP and Scan Dr. let me know if everything goes, if something breaks down or if something is set during printing and scanning Dr.

  Thank you

• Only get half a page of print when you print from web site

  Printer HP photosmart 5520 range. Very well printed when you use the 3G network. Recently received connection comcast internet. When printing from the website (Groupgolfer.com), only get half page to print correctly. Printer hesitates after printing half the page then finally begins on a bad impression with multi-colored bars across the rest of the impression. Looks like once in the more strongly colored part of the page's problems. Email and spread sheet printed correctly. 3G network still prints correctly. I have an iPad with iOS 7.1.2 Motorola SB6121 modem, wireless Belkin N300 Router 2.

  Are the printer and the computer connected to the same router Belkin? If so, I would like to install the HP ePrint App on your iPad. Use the web browser in this application to load a page, you have printing problems, try to print.

  With this method, we will be able to see if there is a problem with the connection between the iPad and the Direct wireless printing.

  HP ePrint by Hewlett Packard<>

  See you soon,.

• Only prints half page

  I have a HP Officejet Pro 8600. When placing multiple controls on the glass and hit "copy" it prints half the page top. When I place a sheet of paper on the window with a text on the entire page, it copies the entire page fine. I use a Dell desktop with Windows 7 64-bit and all the HP drivers are up to date. Any ideas?

  Hello Tdover,

  Welcome to the Forums of HP Support!

  I see when trying to copy with the 8600 Officejet, cheques, it will copy only the top of the page but the text will copy entirely. The printer displays an error during the copy or after?

  Try to check the updates on the printer, getting the latest Firmware and updates. The firmware may not be reading the separate elements.

  Are you able to scan all the checks in the printer to the computer?

• HP envy 5530: does not print the entire page

  My printer only prints half a page, and the book would always jam. always stop the printing of each page in half and will not end the task. can someone help me or give me a reason to explain why this always happens. or is there someone who can help me to solve the problems. Thanks in advance.

  Hey @erin0312,

  Welcome to the Forum from HP Support.

  I see you have problems paper jam with your HP ENVY 5530 e-all-in-one printer. I would like to help.

  You are able to make a copy of the front of the printer without problem? If not, click here and work your way through the steps recommended in order HP. They deal directly with the issue of the material point of view. If Yes (you were able to make a copy of the façade without problem), print opportunities question is a software oriented. In this case, I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Only half a page to print on Avery 5160 labels.

  Original title: labels Avery 5160

  Why am I getting only half a page of my Avery 5160 labels printed?  When I use the regular computer paper, the entire page is printed.

  Hello

  1. what operating system is installed on your computer?

  2. What is the brand and model of the printer?

  If you use the HP LaserJet printer then you can have a look at this article:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=412144&prodTypeId=18972&ObjectID=c00557679

  Check out these links:
  http://www.Avery.com/Avery/en_US/Help-Center/formatting-and-printing-tips/?NS=rank

  http://www.Avery.com/Avery/en_US/Help-Center/product-FAQs/?NS=rank

  Thank you

• Deskjetf2480 only half a page of printing / takes a long time to do anything

  Ive got, this printer for a while now and to be honest not happy with it. Everything has started using it again and replaced the old ink cartridges. The problem is printing only half a page at a time, then pausing for centuries, then spit it out again with only half of a printed page. Its driving me crazy! Ive went through 4 hours of my life yesterday to make it work, that is to say

  (1) reset... did not work

  (2) hard reset... .didnt work

  (3) re install the drivers did not work (4 times)

  (4) cleaned the cartridges and the contacts did not always work!

  Ive followed every bit of advice I could find and now 93 pieces of paper, half of my NEW missing ink, a job end im still no closer to a solution.

  I'm sitting here with a piece of paper, sitting at halfway in my printer waiting a response please help me until the printer is found embedded in my wall. Thank you

  It's definitely a hardware problem then.  Looks like you have tried most of the hardware standard troubleshooting steps.  Take a look at the document below, the link just to see if there is anything in it you have not yet tried.  Other than that, I have a reset, I want you to try, but I can not post the stages publicly.  I sent you a few steps via private Message.  Here is a link that will show you how to use this forum feature if you're not familiar with it.

  Troubleshooting print quality problems

   

• problem printing half page

  Hello Guru,
  
  I'm in big trouble, and I use developer reports 6i. I am facing problem in my report of salary slip. My client uses printer matrix epson.
  the scenario is I have a report of slip of salary (bitmap format) that width and height is 5.5 x 8.5 (5.5 height and width 8.5) but I am printing 11 x 8.5 page.report is printed on half a page but after the end of the printing of the report, scroll down the page and go to the page next so I stop page scrolling printer after printing because I need to use the half page free space
  
  Better compliance
  SN

  Hello
  You must create a new way to shape as you is layout report A4 means 11 * 8.5.
  even if how you create a new form and name "payslip" and setting width 5.5, 8.5 height,.
  After that you are pagesetup report select the paper size is "payslip", then click on apply.

• HP 4640 prid half million pages

  I buy a 4640deskjet from hp for home use, I install the printer accordinly instructions, I do all the tests, all tests are possitive, I print a photo as possitive and fine, but I am trying to print a word or a document of bdf and half a page of reception.

  What is the problem, I did something rong, I have problem with my pc... what?

  Please help... and forgive my language, I don't speak very well.

  Best regards

  Panos

  Hi @panoshatz

  What operating system and version do you have? Mac or Windows?

  Let us make sure that the printer has the latest version of the firmware; DJ4640_R1418A.exe.

  In addition, running print and scan doctor could help. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

• If you see a red X (), follow the onscreen instructions to fix the problem.

I can't wait to hear back on your part.

• LaserJet P2055X: Laserjet printing on the page lines

  When we print of this Laserjet P2055X we almost get ghost text down both sides of the paper (scan picture below). We cleaned the paper path and the roll it seems now that something will have to be replaced. Can someone tell me what is at fault, so I can get the part? Thank you.

  

  Make what is called a test of half.  Put a sheet of paper on the manual fold down tray on the front and open the drawer of the cassette.  Now print a configuration page from the menu information and when the rear edge of the paper between the printer, quickly open the toner door to stop printing.  Remove the toner cartridge and look at the picture below.  If the fault is present, the question is the toner cartridge and nothing else.  If the defect is not present, the fuser unit teflon sleeve has problems and the fuser unit will need to be replaced.  I hope this helps.

• Print 1.5 pages of a document of 4 pages?

  I have a new laptop (ASUS) with Windows 8. The all-in-one printer, HP Deskjet F4580 found immediately and appears as connected. But... I can only print the first pages 1 and a half of a 4-page document.

  I downloaded the drivers recommended etc. I ran the HP doctor. Everything said the connection is OK and the printer is visible and connected, but I don't get that part of the document. I tried several multi-page documents and it stops always at the same point in printing.

  I used my "old" laptop and you can print the documents in their entirety.

  Someone at - it ideas I can do next?

  Interesting.  How is your internet connection on the computer?  This computer does show signs of loss of connectivity?

  This looks like a possible problem with the print spooler. You get the error messages or the printer indicates something specific like the flashing of lights, stuffing, etc.?

  What method did you use to install the printer (printer Install Wizard, software disk or download from the web)?

  Have you already tried to uninstall and reinstall the drivers for this printer?

  Is your "old" laptop has Windows 7?

  Answer these questions for me please I know the best course of action to be undertaken.  If you have not uninstalled the drivers, I would, then use this link to install the printer Deskjet on your PC in Windows 8.  This will reset all the settings in the printer properties.

• 4632 HP ofice Jet: the printer does not! will not be printed double-sided, pages are missed.

  Well where do I begin - on setting up the printer and trying to test the fax and using what was in the box with it, all the tests are passed but! a failure is indicating that the wrong type of phone cord was used when it is the only provided - when I try to print double sided half a page is missing (tried all the margin inflicted) more pages of a document are printed or not printed at random or randomly at some point missed it can work but go the next It will not work. The printer is connected to a wireless network (maybe a problem of queue, but which gave running) and actually exchanged print with another having the same problems realing Am hoping it's just a mistake I looked older and someone can help me please thank you very much in advance

  Hello

  Thank you very much for your info - ihave fixed now all problems - the necessary printer off tcp/ip port (end of the computer) then now works very well and the necessary fax a new cable as that of the box must be faulty - I discovered this through trial and error, and your info then thanks a lot - I found that the printer was working well when connected via USB and not on the network if looked at the port settings to the help of your website of HP

  Once again thanks a lot

• My fairly new Epson WF-2540 is nothing prints on the page, although it pulls the paper and it looks like it's printing, producing a blank page

  The properties show the levels ink because at least half full and I tried to realign the print heads, but still gets the same result.

  This was a new printer and printed a dozen pages before printing, it stopped.

  Hi Anita,.

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.

  Method 1
  Try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  Clear printer spooler files and activate the spooler service
  Step 1
  a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
  b. double click on "Printer Spooler" in the Services list.
  c. click on stop, and then click OK.
  d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on Print Spooler serviceand then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, refer to the article below.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 3

  To identify and fix common printer problems in Windows, including print errors, errors of spooler for printing and other issues that could prevent you from printing, see the article help.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• DeskJet 3050 all-in-One J610A series will not print an alignment page

  I have owned this printer for a year and a half and have had little problems with it. When I inserted a new ink cartridge, it wouldn't print an alignment page. The display shows "load plain white paper on tray and press OK", I did. When I pressed OK, it says "printing" but made no sounds and nothing print. I tried the reset of the printer, the printer and the print spooler reset, cleaning, but nothing works. I can print other documents, but he always wonder to print a page of alignment first of all, that it refuses to print. I am at one loss for what else to do. Help?

  My first thought would be to do a firmware update, but there is not an update for this printer.  It is not really a power problem since you are able to print any other documents.

  You could try a reset by unplugging the power cord directly from the back of the printer when the printer is always on, and then disconnect the other end of the power cord.  Wait a minute and plug the power cord directly into a wall socket (not a surge protector or battery backup) and then again in the printer.

  If there is no change, you might take a look at the following links and if you see a step not taken, that give a try.

  Alignment failed

  No more paper