printing two Officejet 6000

Similar Questions

• To understand how the situation report of the printer hp officejet 6000

  Product number CV051, Vista 32-bit.  Earlier today, a telephone support had run me uninstall3 and then reinstall (my printer print an alignment page after each print job).  The initial problem was solved, but now says my printer HP solutions Center is disconnected.  I can and have printed documents.  The printer is connected of course.  So I ran a Printer Status Report.  This report argues that the network status is offline, and Active connection type is none.  Is that what it means that the printer is not connected?  If so, how can I solve this problem?  (Although it is a newly installed printer this printer was purchased for more than a year and is no longer under warranty.  I used my support call a phone to solve the problem of alignment page).  Please note: I am really a Novice!

  susana1027

  Hey Susana,

  You are assuming that this network status 'offline' means that the printer is not connected to the network. Have you set up this printer on the wireless network again? Also how this printer currently connected to the printer (wired or wireless)? IM waiting for run the HP Print & Scan Doctor to see if he is able to solve your problem. If it does not solve the problem, post back with new details and will continue from there.

  Thank you!

  Sean

• HP Officejet 6000 - print hanging folders.

  Desktop computer is an iMac (mid 2007) operating system is Mavericks, printer is Officejet 6000, driver is version 9.4, responsible for July 2014.

  Printing became a bit strange.  A simple page one or two print takes a few minutes to start printing, but after printing, the print file remains in the queue for several minutes.  If I connect before the deletion, it is printed before the machine stops and on the road again after delivery, and it remains in the queue. Even if I remove it from the queue and then sign out, another copy of the file is printed.  Subsequently that it disappears, but it takes a long time.

  If it is relevant (I'm not sure), the "usb" process runs constantly, used by the user _lp (as shown in activity monitor) and use about 35% of the time processor.

  Anyone have any idea, what could be the problem?

  Hi @Road_Runner

  I understand the print jobs stuck in the queue and you encounter printing problems.  Please follow the following steps and let me know the results.

  We will restore the printing system, repair disk permissions and add new printer using the HP driver.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP officejet 6000: officejet e609a software

  Hi friends

  I'm at my wits end, I tried to install the software for the officejet 6000 E609a for two days. I continue to receive updates of pilot who want me to pay. I buy a printer of opportunity that I had loads of ink for this one and my laptop has broken with the software on it and I can't find the software for this printer anywhere. Please help I'll seriously crazy I know it must be something that I just miss, but I can't find the it. Help send me a link. I'm connectioning with a key usb and printer and windows can't find the driver and I can't find the download on hp, or anywhere else. Thanks thanks thanks a lot in advance

  Morag

  Hi @momogallas,

  Welcome to the HP Forums!

  I see that you are looking for the software and drivers for your printer HP Officejet 6000 e609a for Windows Vista to. I'm happy to meet you!

  To download the full feature software and driver, please visit this Web site, software HP Officejet full feature and pilot.

  This guide, the Message "Device not found" is displayed in Windows XP or Windows Vista during the Installation of USB, could help if you get stuck at all.

  Hope this is what you are looking for and have a great day!

• Print Officejet 6000 occupies more of the page when printing duplex

  My printer is set by default to duplex print. Whenever I use my 6000 Officejet to print two-sided document printing starts just below it should be at the bottom of this page which he finished much lower than when printing a single page (from the same document).

  For example: if I choose to print a page only from multiple paged it document prints fine, exactly as displayed on the screen. However if I choose to print pages 1 and 2 then printing starts at about 5mm below printing and print finishing 15 mm below where it should be. There is no difference in the width of the impression.

  Hi @Porky007,
  
  Welcome to the HP forums!
  
  I understand that you are having problems printing duplex and I will certainly do my best to help once I have gathered a little more information
  
  1. what version of Windows or Mac do you have?
  2. is the printer connected via USB or wireless?
  3. what program you print from? Have you tried another program?
  4 what even happened if you disable duplex printing?
  5. He made it for all pages or just one?
  
  Once I have that information I'll certainly look more in things for you!
  
  In the meantime, if you are using Windows, please download and run the HP print and Scan Doctor and see if it can detect problems for you

• HP Officejet 6000 wireless E609n double-sided printing Option not available

  I have the printer above with a duplexer. There is no available duplex printing option in the print dialog box.  If I open the application HP Officejet 6000 E609n, under settings > Options tab > printing HP accessory two-sided (duplexer) is not checked. When I check it, then the duplex printing option is available in the print dialog box. However, after a print job with two back, the option is no longer available for further work. Reopening of the HP Officejet 600 E609n application reveals that the two box HP-sided accessor (duplexer) printing automatically returns to the off State.

  

  Hello

  Try to restart your Mac and find any difference, also run Software Update from the Apple menu and make sure there is no HP or Apple updates available, then check any change.

  If it persists, try resetting the aboid printing system any curropted configuration:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Some Printers & Scanners.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

• OfficeJet 6000: OfficeJet 6000 does not print

  Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

  Hello @Pistol_shooter, greetings!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

  I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

  I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

  Please let me know if that solves the problem. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Cartridge, HP 920 XL: Wireless HP Officejet 6000, the problem of black ink printer

  I have a HP Officejet 6000 wireless printer.  It's 2nd HP 920 XL cartridge that has not worked.  It does not show that it is empty, but it will not be printed.  Our school cannot afford to replace these at this rate.  Please let me know what to do to make this work correctly.

  I removed the printer as my default so that I could use another printer.  When I ran the program again to check for problems, the guest asked me to add the printer returned as default.   When I reconnected it the printer as long as my default, I tested the printer and it worked.  Don't know why remove and then add back in the set, but he did.

• Don't print black ink (HP Officejet 6000 E609a Series)

  HP Officejet 6000 E609a Series - do not black ink print ---
  No warning light indicates low ink levels, so I called "solutions Center". The chart shows all cartridges, color and black to be virtually complete. I then replace the black cartridge with a new cartridge 920XL, thinking that the original could be defective. Same as before results! I (1) printed to a printer status report (2) print a print quality diagnostics page, (3) aligned the print heads and (4) cleaned the print heads, all to nothing does not. I even carefully cleaned the container for the black cartridge with a Q-Tip to collect a small amount of excess ink. Color cartridges are printing very well but the black cartridges will not print. (Either by the way, it seemed to happen suddenly, not gradually). I would be sincerely acknowledging all recommendations to solve this problem.
  Thank you... RP

  @ wespikard - here is a link to a document that addresses print quality problems of the model of printer that is mentioned in the first post of this thread. It will give you instructions to solutions that will attempt to correct the output quality of your printer. I hope this helps.

• HP Officejet 6000 E609n series 'disorder with detected printer.

  Original title - HP Officejet 6000 E609n series

  Printer does not print.  Connected to the network - ok.  Troubleshooting not detected any specific error but listed "trouble with printer detected" at top of list.  Printer agrees and sends the sheet of paper through but it comes out of the Virgin.  This s the only printer on the network and is set as the default printer.

  Hello

  1 did you changes to the computer before the show?

  2. what operating system you have installed in the computer?

  The instructions will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Method 1: Run the fixit:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: R the print spooler service and delete the print queue 

  Start the print spooler service in the Services console

  1. click on Start, clickrun, type services.mscand click OK.

  2. right click on the print spooler service and then clickstop.

  3. right click on the print spooler service and then clickStart.

  Start the spooler service for printing at the command prompt

  1. click on Start, clickrun, type cmdand then click OK.

  2 type the following commands at the command prompt:

  net stop spooler
  net start spooler
  Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

  Method 3: Follow the steps in the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Delete and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• HP Officejet 6000 only print left side of controls. prints everything well.

  HP Officejet 6000 printer, system is Windows7. We use an insurance agency software and I am trying to print checks and the printer only prints the left side of the check and heel.  The software is ok because I can print checks very well of our generalization printer that uses the entire office.  I can print emails, documents, etc. of the Officejet and they print the entire page.  It's just the checks that print weird.  This has even puzzled IT society.  I tried the HP print and Scan Doctor thing, and he said that everything is fine.

  Any suggestions?

  Thank you!!

  I'm back in business now! Print controls very well. We all remote on a server and I got the printer installed on my desktop, but not inside the server, and I don't even think it.

  Thanks for your help!

• OfficeJet 6000 does not print

  My printer goes through all the motions of printing.  I even made the clean and test page, but again, she is left it is printing, but paper is completely empty.  I did the check online, and it says that everything is good.  Now what should I do?

  The troubleshooting in the here document steps can help solve the blank pages on your Officejet 6000 printer.  Be sure to go through all the steps in order.

• OfficeJet 6000 won't print from computer on our network

  Our officejet 6000 won't print from a computer on the network. All 3 computers running Windows 7 64 bit Home Premium edition. The computer we have problems printing used to be able to print to the Officejet 6000, but now he can't.  In devices and printers, it says that the printer is connected, but I can't print a Test Page.  However, if I run the HP Solution Center, it says that the printer is connected and I can go to the Toolbox of the printer and print a printer status report.  The 2 other computers on our network have no problem printing of pages to document and test.  Why would a printer are struggling to print documents and test pages, but be able to print the printer status report?

  It's just a problem of connection and communication. The computer and the printer can be on different ports or IP addresses. Here's a link below that can help solve this problem.

  http://goo.GL/u3jDE

  Let me know if this can help, thank you.

• Officejet 6000 printing problems

  My Officejet 6000 will not print. The power and light of the resume light blink - normally, this means that there is a paper jam in which there is not. Or that the rollers need cleaning I did. I also cleaned the cartridges where the ink comes out.

  Also I tried to unplug the printer and try again without success. When the power is connected, the green light - after a few seconds it starts to blink and the printer goes into his routine of cleaning after this stop the Summary button illuminates and flashes also. I'd love to hear if someone has the same situation and managed to solve it!

  Have you removed all paper from the input tray and look in the status bar with a flashlight to make sure nothing is caught in the rollers?

  So, did you remove the module front/back/rear access door to make sure that nothing is stuck to the back of the rolls?

  I also advise to open the upper part of the printer and remove all of the ink provides unit; including the print head.  Don't you see that anything taken under/the print head Assembly all about?

  Hard reset of the printer with the supplies out of the unit:

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug the unit back to

  Once the device is fed up reinstall ink supplies in the printer.  Also check to see if the truck can slide left and right all the way inside the printer by hand.

  There is also a document with additional steps found here.  I hope this helps.

• HP officejet 6000 prints the alignment page after each print job

  HP officejet 6000 cb051

  Vista 32

  a technician had me remove and then reinstall the driver, I thought it helped, but it didn't so I reinstalled the driver from the web page and that did not help either

  My printer prints an alignment page after each print job.

  I used my call free support to resolve this issue, and I thought it was fixed, but it isn't.  I checked the manual and there is no information there.  I have no idea what to do next.  Someone at - it any help?

  Susana

  susana1027

  The alignment page will print until it completes successfully.  Try print a page of diagnosis as on the Six Solution on this page. Do all color printers correctly?  The alignment will fail if the parties in black and color do not print correctly.